8/12/2019 Siliconic Oil Sat1 http://slidepdf.com/reader/full/siliconic-oil-sat1 1/12 Typology of parts to use for saturation with siliconic oil The saturation of pore filter is an important step to do before starting a CPTU test. Pagani Company has a complete kit which is necessary for the saturation procedure . The following descriptions are made by using a lot of pictures, this way of explaining make more easy for me to explain and for you to understand I hope. 1)Mount of mechanical parts tripod of probeThe picture1 shows the parts used to mount the tripod of probe(piezocone). picture1: Mechanical parts - tripod of probe Start mounting by insertion of feet into the tripod main base so fix those firmly by using a hexagonal screwdriver. The assembling of those part is easy, notice that tripod support part 2 has a square cross section and it is smaller than part 1 so is easy to insert into the part 1. Now turn the top down of the feet with the mounted base and insert the “body” of the tr ipod as it shows on the picture2. In the picture 2 is also explained the knobs and their functionality. The tripod of probe is complete and in the following issue will be explain the probe with the oil kit.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Typology of parts to use for saturation with siliconic oil
The saturation of pore filter is an important step to do before starting a CPTUtest. Pagani Company has a complete kit which is necessary for the saturation
procedure . The following descriptions are made by using a lot of pictures, thisway of explaining make more easy for me to explain and for you to understand I
hope.
1)Mount of mechanical parts tripod of probe The picture1 shows the parts used to mount the tripod of probe(piezocone).
picture1: Mechanical parts - tripod of probeStart mounting by insertion of feet into the tripod main base so fix those firmly
by using a hexagonal screwdriver. The assembling of those part is easy, notice
that tripod support part 2 has a square cross section and it is smaller than part 1so is easy to insert into the part 1.
Now turn the top down of the feet with the mounted base and insert the
“body” of the tr ipod as it shows on the picture2. In the picture 2 is alsoexplained the knobs and their functionality. The tripod of probe is complete
and in the following issue will be explain the probe with the oil kit.