Sign (Submit (2) Sign Elevations, (2) Site Drawings & (2) Sign Detail Sheets with attachment and electrical detail) Banner/Wind Device (Complete Bottom Portion) Sign Application: Name of Business:_____________________________ Address where sign will be placed: Sign Contractor Name Phone Address City State Zip Business Owner Name Phone Address City State Zip Electrical Subcontractor Name Phone Address City State Zip Applicant (Print): _________________________________ Signature _________________________________________ E-mail _______________________________________________ # of Existing Signs:_______________ Reface only: Yes No Street Frontage _________________ feet (Ground Sign) Sign illuminated: _______External _______ Internal _______ Not illuminated Zoning __________________________ This sign is located in the Downtown Implementation Plan area (DTIP). Type of sign: All Sign Dimensions: Effective area in square feet: ____________________ Height in feet (measured from ground to top of sign): ____________________ Ground Sign Setbacks: Left side setback: ___________________________ Right side setback: ___________________________ Front yard setback: __________________________ Back yard setback: _________________________ All ground signs over fifteen (15) feet in height must have two engineered drawings, sealed by a professional engineer. The sign ordinance requires that all ground, roof, and projecting signs be designed and installed to withstand a wind pressure of not less than twenty (20) pounds per square foot of area. Wind Device (banners, flags, pennants, inflatables, etc.) Application: Note: Wind devices are only valid for the display of banners, flags, pennants, streamers, balloons, and inflatable’s. Wind Devices shall not be attached to trees, placed in public rights-of-ways or easements, attached to utilities poles, street signs, or any other forms of public property. Inflatable’s and balloons on the ground are restricted to a height no greater than 30 feet. Inflatable’s and balloons on the roof of a building shall not extend more than 10 feet above the highest part of the roof. For more information on Wind Device Regulations, review Ordinance No. 2014-406 Address where wind device will be placed: Name of Business: Phone Address City State Zip Type of wind device to be used. Please check all that apply. Pennant(s) Small Balloon(s) (Blow-Up Type) Large Air Balloon(s) (No taller than 30’ from ground or 10’ from roof to top of balloon) Streamer(s) Banner(s) Flag(s) Other (please specify): ______________________________________________________________________ Notice: I understand that I am hereby given notice that my wind device(s) must be removed in thirty (30) days, from date of issuance of permit, or I may be subject to a fine of up to $2,000 per day. ______________________________________________________________________________________________________________________________________ Print Signature E-mail Date Sign and Wind Device Application 215 W Hickory Street Denton, TX 76201 Phone 940-349-8360 Fax 940-349-7208 Permit # Date Wind device # of #3