110 PRODUCTS The Siemon XLBET (Extra Large Building Entrance Terminal) frames are designed to be used in large installations where space is a premium. Innovative horizontal and vertical cable managers provide cable paths for routing of large quantities of cross-connect wires or S110 ® Patch Cords. XLBET FRAME Cut installation time with Siemon pre-wired XLBET frames. A wide variety of custom configurations are available. Contact our Technical Support Department for more information Vertical side channels are 6 in. (152mm) deep to accommodate large cable bundles Frames can be ordered with standard S110 blocks factory mounted to save installation time Frames can be ordered with or without S110 bases S110 bases can be mounted on one or both sides for additional capacity Concrete mounting kits are available for securing frames to concrete floors Frames are 7 ft. (2.1m) high Configure up to 7,200 -pairs Innovative horizontal and vertical cable managers provide cable paths for routing of large quantities of cross-connect wires Standard rack mounting per ANSI/EIA-310-C Frames are available in 23 in. (584mm) widths
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
110 P
RODUCTS
The Siemon XLBET (Extra Large Building Entrance Terminal) frames aredesigned to be used in large installations where space is a premium.Innovative horizontal and vertical cable managers provide cable paths forrouting of large quantities of cross-connect wires or S110® Patch Cords.
XLBET FRAME
Cut installation time with Siemon pre-wired XLBETframes. A wide variety of custom configurationsare available. Contact our Technical SupportDepartment for more information
Vertical side channels are 6 in. (152mm)deep to accommodate large cable bundles
Frames can be ordered with standard S110blocks factory mounted to save installation time
Frames can beordered with orwithout S110 bases
S110 bases can bemounted on one or bothsides for additionalcapacity
Concrete mountingkits are availablefor securing framesto concrete floors
Frames are 7 ft. (2.1m) high
Configure up to 7,200 -pairs
Innovative horizontal and verticalcable managers provide cable pathsfor routing of large quantities ofcross-connect wires
XLBET Frame:XL-(XX)00 ....................7 ft. x 23 in. (2.1m x 584mm) XLBET
frame. Includes rack, wiremanagement and mounting hardware.S110® wiring blocks not included
Use (XX) to specify pair count: 36 = 3600 pair, 72 = 7200 pair
XLBET Frame with S110 Wiring Blocks:XL-(XX)00-W ...............7 ft. x 23 in. (2.1m x 584mm) XLBET
frame. Includes rack, wiremanagement and mounting hardware.S110 connecting blocks not included
Use (XX) to specify pair count: 36 = 3600 pair, 72 = 7200 pair
Accessories:XL-CK..........................Concrete Mounting Kit. Includes all
necessary hardware to secure one (1)23 in. (584mm) XLBET frame to aconcrete floor
XL-(X)-3600.................S110 connecting block kit. Includesthe appropriate number of 4- or 5-pair connecting blocks to fullypopulate a 3600-pair frame. Two kitscan be ordered for 7200-pair frames.
Use (X) to specify connecting block: A= 5-pair, B= 4-pair
XL-K23 ........................23 in. (584mm) rack conversion kit.Converts one side of a standard 23in. (584mm) rack to an XLBET frame.Two kits are required to utilize bothsides of a 23 in. (584mm) rack.Includes wire managers, mountingbars and mounting hardware.*
*Rack, S110 wiring blocks, clear designation holders andlabels not included.
Because we continuously improve our products, Siemon reserves the right tochange specifications and availability without prior notice.
S110® is a trademark of Siemon
For related product information request Spec Sheet(s):S110 Category 5 Patch Plug (PROD-SS-10P)