Siemens Pricing Guide for Horizontal Above NEMA Motors ... · PDF filePricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211 ... Pricing Guide for Horizontal Above NEMA Motors

Pricing Guide for Horizontal Above NEMA Motors – Rev. 0

www.sea.siemens.com/us/Products/Electric-Motors/ s

Rev. No. Approved: Title Date

0 (Joseph Moreland) Marketing Manager 2/1/2011

Section 1

Part RevRecPage 1 of 1 Date 02/11

Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211

Revision Record

Rev. No. Section Part Page Date Description 0 All All All 02/11 NEW

All information in this guide is subject to change without notice.

Section 1

Part GeneralPage 1 Date 02/11


General Information

As one of the World’s leading provider of large motors with Global service and support second to none, Siemens sells and manufactures a complete line of motors at the ISO-9001 Certified Norwood, OH plant. This 350,000 square foot facility has produced over 150,000 high voltage motors continuously since 1898. The Norwood plant offers horizontal AC squirrel-cage induction motors through 18,000 horsepower and voltage ranges from 460 through 13200 volts. The plant also manufactures a complete line of vertical motors. Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemens plants located in Germany. The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing the more common ratings, enclosures and modifications. Special features or applications which could affect frame size and, therefore seriously impact cost and price, should be referred to factory for price and availability. Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred to factory for pricing and availability.

For additional information and updates of our products and services visit our website at

http://www.sea.siemens.com/us/products/electric-motors/Pages/Electric-Motors.aspx

and click on the “Large AC Above NEMA motors” link. NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211 supersedes all previous

issues of the Pricing Guide for Horizontal Above NEMA Motors ANSP-60000-xxxx and ANPG-60000-xxxx.

http://www.sea.siemens.com/us/products/electric-motors/Pages/Electric-Motors.aspx

Section 1

Part GeneralPage 2 Date 02/11


General Information

All ratings in this price guide are designed for the following; Horizontal Mounting 3 phase Class F insulation Service factor of 1.0 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor Maximum 40 degrees C ambient Altitude of 3300 feet or less Direct connection to a typical centrifugal load with rated voltage and frequency applied at the

motor terminals and a load inertia value equal to or less than NEMA value for the rating. Also, during accelerating period, connected load torque shall be equal to, or less than, a torque which varies as square of the speed and is equal to 100% of full-load torque at rated speed.

Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix or combination of suffixes dependent upon enclosure, bearings, and/or features;

D = Flanged. Indicates that motor is to be supplied with a D-flanged bearing housing. S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension for

direct connection except on 680 frame series where no suffix is used. Y = Special mounting. Indicates motor is to be supplied with non-standard mounting dimensions. Z = Special shaft. Indicates motor is to be supplied with non-standard or special shaft dimensions. No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extension

except on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is made from the Modification & Accessories Section.

Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirements to factory for price and availability. Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC- 70000-xxxx.

Section 1

Part Encl Page 3 Date 02/11


Enclosures – Designed To Meet All Application And Environmental Needs

Horizontal Drip Proof / Weather Protected I (Type CG) / IC01 / IP23

Meets or exceeds industry standards for NEMA WP-type machines. Best suited for indoor applications where not exposed to extreme ambient conditions. Available through 10,000 HP.

Horizontal Drip Proof / Weather Protected II (Type CGII) / IC01 / IP24

Meets or exceeds industry standards for NEMA WPII-type machines. Specifically designed for outdoor applications where motor is not likely to be protected by other structures. Available through 18,000 HP.

Totally Enclosed Fan Cooled (Type CZ and CGZ) / IC411 / IP54

Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes cooling fins on all four quadrants of yoke and housings. Available through 2250 HP.

Totally Enclosed Air-to-Air Cooled (Type CAZ) / IC611 / IP54

Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes air-to-air tube-type heat exchangers. Available through 14,000 HP.

Section 1

Part Encl Page 4 Date 02/11


Enclosures – Designed To Meet All Application And Environmental Needs

Totally Enclosed Water-to-Air Cooled (Type CGG) / ICW81 / IP54

Same critical design requirements as the air-to-air cooled machine with the added benefit of low noise and efficient water cooling. Available through 18,000 HP.

Section 1

Part MRPD Page 5 Date 02/11


Machine Readable Product Description (MRPD) Structure

Siemens Norwood AboveNEMA motors has adopted the Machine-Readable Product Designation structure (MRPD). These designations, which are very similar in structure to those used by many other Siemens Business Units, will provide a clear means of product designation. The benefits of adopting the MRPD codes include:

1) Consistent communication between regional organizations, field sales personnel and the business unit

2) Improved processes within Norwood 3) Enables smoother transition into product standardization 4) Provides a basis for product lead-times

The MRPD structure is generated by two segments:

1) Product codes - 12 Alpha-numeric characters which define: Enclosure Frame-size Motor speed (Number of poles) Rotor construction Voltage / Frequency Type of construction (horizontal, vertical, flange-mounted, etc)

2) Option codes - Standard accessories The next several pages describe the Product Code structure for;

Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines. TEFC machines.

In the Modifications and Accessories Section, you will find the Option Codes and Categories listed. It is important that these codes, both Product and Options, are clearly indicated on the orders. The Categories, explained in more detail later, are listed as the minimum category for the given option. The base motor category or other options with higher categories may impact the overall category of the motor. The highest category will dictate the applicable lead-time of the motor.

Section 1




MODULAR Sub Group Factory

Reserved

# of Poles

Cooling T

ype

Rotor Type

Volts / H

z

Mounting

Options

Data Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - ZExample 1 R P 2 6 8 E - 2 H E 3 0 - Z

1 + 2 Main Group Identification1R Induction Motor (Modular - ODP/WPI, WPII, TEWAC or TEAAC)1S Induction Motor (Modular) - Hazardous Areas

3 Sub Group (Enclosure-type & Hazardous Area)1RA ODP / WPI (IP23 / IC01), Non-hazardous Areas1RN TEWAC (IP54 / ICW81), Non-hazardous Areas1RP WPII (IP24 / IC01), Non-hazardous Areas1RQ TEAAC (IP54 / IC611 or IC616), Non-hazardous Areas1SC WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2)1SG TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2)1SL TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2)

4 Factory Specifics2 2 = Norwood-built

5 + 6 Frame-size50 500 Frame58 580 Frame68 680 Frame80 800 Frame11 1120 Frame

7 Reserved for Factory UseE This position will contain letters for Norwood-built motors

8 Number of Poles2 2 pole motor4 4 pole motor6 6 pole motor8 8 pole motor3 10 pole motor5 12 pole motor7 14 pole motor9 Refer to factory for slower speeds

9 Cooling TypeODP / WPI, WPII & TEWAC - Standard Internal Fan DesignTEAAC = Use H Code for TEAACs with Auxiliary Blowers for Cooling (IC616)

J TEAAC = Use J Code for TEAACs with Shaft-Mounted External Fan (IC611)

10 Rotor ConstructionMotors used with VFD

B Aluminum Die-cast L Low Voltage Drive - Aluminum RotorE Copper-bar M Low Voltage Drive - Copper Rotor

N Medium Voltage Drive - Aluminum RotorV Medium Voltage Drive - Copper Rotor

11 Voltage, frequency

0 3300 V, 50 hz 0 690 V, --1 6600 V, 60 hz 1 460 V, 60 hz2 13200 V, 60 hz 2 575 V, 60 hz3 4160 V, 60 hz 3 380 V, 50 hz4 4000 V, 60 hz 4 415 V, 50 hz5 2300 V, 60 hz 5 500 V, --6 6000 V, 50 hz 67 6600 V, 50 hz 7 660 V, --8 10000 V, 50 hz 89 other voltage/frequency 9 other voltage/frequency

12 Mounting0 Horizontal, foot-mounted1 NEMA D-Flange, with feet3 Vertical, hollow shaft4 Vertical, solid shaft, with canopy8 Vertical, solid shaft, without canopy9 Other types of mounting (requires additional text)

13 Option CodeZ Means that the motors will have additional options

Medium / High Voltage Applications Low Voltage Applications

Main Group

Frame-size

H

Motors without VFD (Line Supply Operation)

Section 1




TEFC Sub Group Factory

Reserved

# of Poles

Rotor T

ype

Line Supply or VFD

Volts / H

z

Mounting

Optio

ns

Data Position 1 2 3 4 5 6 7 - 8 9 10 11 12 - ZExample 1 L A 2 5 8 E - 2 L N 3 0 - Z

1 + 2 Main Group Identification1L Induction Motor (TEFC), Non-Hazardous Area1M Induction Motor (TEFC), Hazardous Area (Div. or Zone 2)

3 Sub Group (Enclosure-type & Hazardous Area)1LA TEFC, IP54, Basic Version1MS TEFC, IP54, Hazardous Area (Division 2 or Zone 2)

4 Factory Specifics2 2 = Norwood-built

5 + 6 Frame-size50 500 Frame58 580 Frame70 708 Frame78 780 Frame88 880 Frame

7 Reserved for Factory UseE This position will contain letters for Norwood-built motors

8 Number of Poles2 2 pole motor4 4 pole motor6 6 pole motor8 8 pole motor3 10 pole motor5 12 pole motor7 14 pole motor9 Refer to factory for slower speeds

9 Rotor TypeL Aluminum die-castN Copper-bar

10 Line Supply or VFD (LV or MV)A Line-supply; Low Voltage (<1000 V)M VFD; Low Voltage (<1000 V)N Line-supply; Medium Voltage (>1000 V)V VFD; Medium Voltage (>1000 V)

11 Voltage, frequencyLine supply/drive converter operation, LV

0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V1 6600 V, 60 hz 1 2.3 kV, 60 hz 1 460 V2 2300 V, 60 hz 2 3.3 kV, 50 hz 2 575 V3 3000 V, 50 hz 3 3.3 kV, 60 hz 5 500 V4 4160 V, 60 hz 4 4.16 kV, 50 hz 7 660 V5 4000 V, 60 hz 5 4.16 kV, 60 hz 9 Other Voltages6 6000 V, 50 hz7 6600 V, 50 hz9 other voltage/frequency

12 Mounting0 Horizontal, foot-mounted1 NEMA D-Flange, with feet4 Vertical, solid shaft, with canopy8 Vertical, solid shaft, without canopy9 Other types of mounting (requires additional text)

13 Option CodeZ Means that the motors will have additional options

Line supply operation, MV / HV MV drive converter operation

Main Group

Frame-size

Section 1

Part Index Page 8 Date 02/11


Index

Section 1 Base List Prices, Frame, and Features Page

Part 1 - ODP Enclosure - 60 Hertz 1-10

Part 2 - WPI Enclosure - 60 Hertz 1-10

Part 3 - WPII Enclosure - 60 Hertz 1-10

Part 4 - TEWAC Enclosure - 60 Hertz 1-7

Part 5 - TEFC Enclosure - 60 Hertz 1-8

Part 6 - TEAAC Enclosure - 60 Hertz 1-7

Part 1A - ODP Enclosure - 50 Hertz 1-3

Part 2A - WPI Enclosure - 50 Hertz 1-3

Part 3A - WPII Enclosure - 50 Hertz 1-3

Part 4A - TEWAC Enclosure – 50 Hertz 1-2

Part 5A - TEFC Enclosure - 50 Hertz 1-2

Part 6A - TEAAC Enclosure - 50 Hertz 1-2

Part 5B – TEFC Enclosure per IEEE 841 Std – 2009 1-4

Section 2 Modifications & Accessories Adjustable Speed Drives 1

Altitude 2

Ambient 2

API 541 – 3rd or 4th Editions 3

API 547 – 2005 3-6

Assembly 7

Balance – Precision Balance for Low Vibration 7

Balance – Special 7

Bearings – Insulation 8

Bearings – Lubrication Systems 8

Bearings - Oil Sump Heaters 8

Bearing Protective Devices – Mechanical 9

Bearing Protective Devices – Temperature 10-11

Bearings – Sleeve 12

Belt Drive Applications 13

Cancellation Charges 14

Chipper/Crusher Drives 14

Couplings 15

Current Transformers 15

Differential Pressure Switch 15

Direction of Rotation 15 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.

Section 1

Part Index Page 9 Date 02/11


Index

Section 2 Modifications & Accessories - continued Page Efficiency – Higher Than Standard 15

Export Packaging 16

Fan - External Cooling 16

Fan Housing 16

Filters 17

Flanges 17

Freight 17

Frequency - 50 Hertz 17

Ground Pads 18

Hardware 18

Hazardous Location 18

IEEE 841 18

Inrush Current 18

Insulation 19

Load Inertia 19

Noise Requirements 20

Paint Systems 21

Rotor Construction / Corrosion Protection 21

Service Factor 22

Shaft Extension 22

Shaft Seal 22

Shipment Terms & Packaging 23

Software Packages 23

Soleplates / Slide Rails / Shims 23

Space Heaters 24

Starting – Reduced Voltage/Soft Start 24

Startup Assistance 24

Stator - Connections 24

Stator -Insulation/Treatments 25

Stator - Protective Devices 25 Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators

26-27

Tests 28-29

Torques – Non-Standard 30

Voltages 30

Warranty Offerings 30 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.

ENCLOSUREODP

Hertz60 Volt460-

Base List Prices, Frame, and Features AC Squirrel-Cage Induction1.0 Service FactorClass F Insulation80 deg. C Rise by Resistance40 deg. C Ambient


1Part 1Section

Page

1

Date 02/11

TypeVoltageHP RPM FrameBasic List

PricesStd. Rotor

ConstructionStd. Bearings &

LubricationStd. Bearing

Cooling Rotation MRPD

200 3600 508 $42,091 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250A-2HB10

200 1800 508 $38,105 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250B-4HB10

200 1200 508 $39,301 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250D-6HB10

200 900 508 $41,071 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250F-8HB10

200 720 588 $50,551 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA258A-3HB10


200 514 588 $85,570 Copper Bar Ball - Grease Lube Self Bi-directional CG460 1RA258E-7HE10





250 900 508 $43,165 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250H-8HB10



250 514 588 $88,229 Copper Bar Ball - Grease Lube Self Bi-directional CG460 1RA258F-7HE10

300 3600 508 $42,625 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250C-2HB10



300 900 508 $46,684 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250L-8HB10


300 600 588 $69,643 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA258E-5HB10

300 514 5810 $93,515 Copper Bar Ball - Grease Lube Self Bi-directional CG460 1RA258G-7HE10



350 1200 508 $44,929 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250K-6HB10

350 900 508 $49,201 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250M-8HB10


350 600 5810 $77,588 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA258G-5HB10

400 3600 508 $44,454 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250E-2HB10



400 900 5010 $56,410 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250P-8HB10






450 900 5010 $60,189 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250R-8HB10


450 600 5810 $107,774 Copper Bar Ball - Grease Lube Self Bi-directional CG460 1RA258J-5HE10

500 3600 508 $48,439 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250G-2HB10






ENCLOSUREODP

Hertz60 Volt460-



2Part 1Section

Page

1

Date 02/11


PricesStd. Rotor






600 1200 5010 $58,513 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250Q-6HB10


600 720 5810 $91,848 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA258J-3HB10

700 3600 508 $52,430 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250J-2HB10




800 3600 5010 $60,143 Alum. Diecast Ball - Grease Lube Self Uni-directional CG460 1RA250K-2HB10

800 1800 5010 $55,153 Alum. Diecast Ball - Grease Lube Self Bi-directional CG460 1RA250N-4HB10



ENCLOSUREODP

Hertz60 Volt2300-



3Part 1Section

Page

1

Date 02/11


PricesStd. Rotor











200 450 6811 $156,922 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268A-9HE50
























350 450 6811 $165,474 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268B-9HE50









ENCLOSUREODP

Hertz60 Volt2300-



4Part 1Section

Page

1

Date 02/11


PricesStd. Rotor











450 450 6811 $174,589 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268D-9HE50








500 450 6811 $180,480 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268E-9HE50







600 514 6811 $184,785 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268F-7HE50

600 450 6811 $190,679 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268G-9HE50






700 600 6811 $168,704 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268C-5HE50

700 514 6813 $208,832 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268H-7HE50

700 450 6813 $232,386 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268M-9HE50







800 514 6813 $226,495 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268L-7HE50




900 900 5812 $122,226 Copper Bar Ball - Grease Lube Self Bi-directional CG2300 1RA258L-8HE50




ENCLOSUREODP

Hertz60 Volt2300-



5Part 1Section

Page

1

Date 02/11


PricesStd. Rotor




1000 3600 5010 $63,921 Alum. Diecast Ball - Grease Lube Self Uni-directional CG2300 1RA250L-2HB50



1000 900 5812 $132,317 Copper Bar Ball - Grease Lube Self Bi-directional CG2300 1RA258P-8HE50


1000 600 6813 $214,723 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268J-5HE50

1250 3600 5010 $69,726 Alum. Diecast Ball - Grease Lube Self Uni-directional CG2300 1RA250N-2HB50
















2000 3600 5810 $96,087 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG2300 1RA258G-2HB50




2250 3600 5812 $114,733 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG2300 1RA258J-2HB50


2250 1200 6813 $214,723 Copper Bar Sleeve - Oil Lube Self Bi-directional CG2300 1RA268K-6HE50

2500 3600 5812 $122,284 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG2300 1RA258L-2HB50



3000 3600 6811 $168,454 Copper Bar Sleeve - Oil Lube Self Uni-directional CG2300 1RA268C-2HE50


3500 3600 6813 $193,128 Copper Bar Sleeve - Oil Lube Self Uni-directional CG2300 1RA268E-2HE50


4000 3600 6813 $199,173 Copper Bar Sleeve - Oil Lube Self Uni-directional CG2300 1RA268F-2HE50


4500 3600 6813 $205,214 Copper Bar Sleeve - Oil Lube Self Uni-directional CG2300 1RA268G-2HE50

5000 3600 6813 $211,265 Copper Bar Sleeve - Oil Lube Self Uni-directional CG2300 1RA268H-2HE50

Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.

ENCLOSUREODP

Hertz60 Volt4000-



6Part 1Section

Page

1

Date 02/11


PricesStd. Rotor







































400 900 5010 $75,133 Copper Bar Ball - Grease Lube Self Bi-directional CG4000 1RA250R-8HE40





ENCLOSUREODP

Hertz60 Volt4000-



7Part 1Section

Page

1

Date 02/11


PricesStd. Rotor

















































ENCLOSUREODP

Hertz60 Volt4000-



8Part 1Section

Page

1

Date 02/11


PricesStd. Rotor













































ENCLOSUREODP

Hertz60 Volt6600-



9Part 1Section

Page

1

Date 02/11


PricesStd. Rotor







































700 1200 5810 $109,107 Copper Bar Ball - Grease Lube Self Bi-directional CG6600 1RA258H-6HE10

700 900 5812 $122,226 Copper Bar Ball - Grease Lube Self Bi-directional CG6600 1RA258K-8HE10










ENCLOSUREODP

Hertz60 Volt6600-



10Part 1Section

Page

1

Date 02/11


PricesStd. Rotor












1000 1200 5812 $133,436 Copper Bar Ball - Grease Lube Self Bi-directional CG6600 1RA258M-6HE10




1250 3600 5810 $90,016 Alum. Diecast Ball - Grease Lube Self Uni-directional CG6600 1RA258F-2HB10













2000 3600 5812 $126,219 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG6600 1RA258K-2HB10








3000 3600 6813 $178,125 Copper Bar Sleeve - Oil Lube Self Uni-directional CG6600 1RA268D-2HE10






ENCLOSUREWPI

Hertz60 Volt460-



1Part 2Section

Page

1

Date 02/11


PricesStd. Rotor


















































ENCLOSUREWPI

Hertz60 Volt460-



2Part 2Section

Page

1

Date 02/11


PricesStd. Rotor

















ENCLOSUREWPI

Hertz60 Volt2300-



3Part 2Section

Page

1

Date 02/11


PricesStd. Rotor












































ENCLOSUREWPI

Hertz60 Volt2300-



4Part 2Section

Page

1

Date 02/11


PricesStd. Rotor


















































ENCLOSUREWPI

Hertz60 Volt2300-



5Part 2Section

Page

1

Date 02/11


PricesStd. Rotor






























2250 3600 5812 $116,113 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG2300 1RA258J-2HB50















ENCLOSUREWPI

Hertz60 Volt4000-



6Part 2Section

Page

1

Date 02/11


PricesStd. Rotor












































ENCLOSUREWPI

Hertz60 Volt4000-



7Part 2Section

Page

1

Date 02/11


PricesStd. Rotor

















































ENCLOSUREWPI

Hertz60 Volt4000-



8Part 2Section

Page

1

Date 02/11


PricesStd. Rotor













































ENCLOSUREWPI

Hertz60 Volt6600-



9Part 2Section

Page

1

Date 02/11


PricesStd. Rotor







































700 1200 5810 $110,457 Copper Bar Ball - Grease Lube Self Bi-directional CG6600 1RA258H-6HE10











ENCLOSUREWPI

Hertz60 Volt6600-



10Part 2Section

Page

1

Date 02/11


PricesStd. Rotor





























2000 3600 5812 $127,599 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CG6600 1RA258K-2HB10








3000 3600 6813 $181,444 Copper Bar Sleeve - Oil Lube Self Uni-directional CG6600 1RA268D-2HE10






ENCLOSUREWPII

Hertz60 Volt460-



1Part 3Section

Page

1

Date 02/11


PricesStd. Rotor




200 3600 508 $46,566 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250A-2HB10

200 1800 508 $42,365 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250B-4HB10

200 1200 508 $43,499 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250D-6HB10

200 900 508 $45,268 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250F-8HB10

200 720 588 $56,932 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP258A-3HB10


200 514 588 $91,854 Copper Bar Ball - Grease Lube Self Bi-directional CGII460 1RP258E-7HE10

200 450 588 $91,854 Copper Bar Ball - Grease Lube Self Bi-directional CGII460 1RP258E-9HE10

250 3600 508 $47,310 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250A-2HB10



250 900 508 $47,363 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250H-8HB10



250 514 588 $94,512 Copper Bar Ball - Grease Lube Self Bi-directional CGII460 1RP258F-7HE10

300 3600 508 $46,963 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250C-2HB10



300 900 508 $50,882 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250L-8HB10


300 600 588 $75,927 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP258E-5HB10

300 514 5810 $99,799 Copper Bar Ball - Grease Lube Self Bi-directional CGII460 1RP258G-7HE10



350 1200 508 $49,127 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250K-6HB10

350 900 508 $53,398 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250M-8HB10


350 600 5810 $83,872 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP258G-5HB10

400 3600 508 $48,793 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250E-2HB10



400 900 5010 $60,608 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250P-8HB10






450 900 5010 $64,386 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250R-8HB10


450 600 5810 $114,058 Copper Bar Ball - Grease Lube Self Bi-directional CGII460 1RP258J-5HE10

500 3600 508 $52,777 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250G-2HB10






ENCLOSUREWPII

Hertz60 Volt460-



2Part 3Section

Page

1

Date 02/11


PricesStd. Rotor






600 1200 5010 $62,711 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250Q-6HB10


600 720 5810 $98,131 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP258J-3HB10

700 3600 508 $56,768 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250J-2HB10




800 3600 5010 $64,482 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII460 1RP250K-2HB10

800 1800 5010 $59,351 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII460 1RP250N-4HB10



ENCLOSUREWPII

Hertz60 Volt2300-



3Part 3Section

Page

1

Date 02/11


PricesStd. Rotor










200 514 588 $95,369 Copper Bar Ball - Grease Lube Self Bi-directional CGII2300 1RP258F-7HE50

200 450 6811 $169,121 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268A-9HE50
























350 450 6811 $177,673 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268B-9HE50




400 900 5010 $65,230 Alum. Diecast Ball - Grease Lube Self Bi-directional CGII2300 1RP250R-8HB50





ENCLOSUREWPII

Hertz60 Volt2300-



4Part 3Section

Page

1

Date 02/11


PricesStd. Rotor











450 450 6811 $186,788 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268D-9HE50








500 450 6811 $192,679 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268E-9HE50







600 514 6811 $196,984 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268F-7HE50

600 450 6811 $202,879 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268G-9HE50






700 600 6811 $180,903 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268C-5HE50

700 514 6813 $221,031 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268H-7HE50

700 450 6813 $244,586 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268M-9HE50







800 514 6813 $238,695 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268L-7HE50




900 900 5812 $128,509 Copper Bar Ball - Grease Lube Self Bi-directional CGII2300 1RP258L-8HE50




ENCLOSUREWPII

Hertz60 Volt2300-



5Part 3Section

Page

1

Date 02/11


PricesStd. Rotor




1000 3600 5010 $68,259 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII2300 1RP250L-2HB50



1000 900 5812 $138,601 Copper Bar Ball - Grease Lube Self Bi-directional CGII2300 1RP258P-8HE50


1000 600 6813 $226,922 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268J-5HE50

1250 3600 5010 $74,064 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII2300 1RP250N-2HB50
















2000 3600 5810 $102,714 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII2300 1RP258G-2HB50




2250 3600 5812 $121,153 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII2300 1RP258J-2HB50


2250 1200 6813 $226,922 Copper Bar Sleeve - Oil Lube Self Bi-directional CGII2300 1RP268K-6HE50

2500 3600 5812 $128,705 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII2300 1RP258L-2HB50



3000 3600 6811 $180,965 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII2300 1RP268C-2HE50


3500 3600 6813 $205,639 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII2300 1RP268E-2HE50


4000 3600 6813 $211,684 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII2300 1RP268F-2HE50


4500 3600 6813 $217,725 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII2300 1RP268G-2HE50

5000 3600 6813 $223,776 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII2300 1RP268H-2HE50


ENCLOSUREWPII

Hertz60 Volt4000-



6Part 3Section

Page

1

Date 02/11


PricesStd. Rotor







































400 900 5010 $79,330 Copper Bar Ball - Grease Lube Self Bi-directional CGII4000 1RP250R-8HE40





ENCLOSUREWPII

Hertz60 Volt4000-



7Part 3Section

Page

1

Date 02/11


PricesStd. Rotor

















































ENCLOSUREWPII

Hertz60 Volt4000-



8Part 3Section

Page

1

Date 02/11


PricesStd. Rotor


























2000 3600 5810 $105,515 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII4000 1RP258G-2HB40












3500 3600 6813 $208,719 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII4000 1RP268E-2HE40




4500 3600 6813 $220,805 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII4000 1RP268G-2HE40



ENCLOSUREWPII

Hertz60 Volt6600-



9Part 3Section

Page

1

Date 02/11


PricesStd. Rotor







































700 1200 5810 $115,390 Copper Bar Ball - Grease Lube Self Bi-directional CGII6600 1RP258H-6HE10

700 900 5812 $128,509 Copper Bar Ball - Grease Lube Self Bi-directional CGII6600 1RP258K-8HE10










ENCLOSUREWPII

Hertz60 Volt6600-



10Part 3Section

Page

1

Date 02/11


PricesStd. Rotor












1000 1200 5812 $139,720 Copper Bar Ball - Grease Lube Self Bi-directional CGII6600 1RP258M-6HE10




1250 3600 5810 $96,436 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII6600 1RP258F-2HB10













2000 3600 5812 $132,639 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGII6600 1RP258K-2HB10








3000 3600 6813 $190,636 Copper Bar Sleeve - Oil Lube Self Uni-directional CGII6600 1RP268D-2HE10






ENCLOSURETEWAC

Hertz60 Volt460-



1Part 4Section

Page

1

Date 02/11


PricesStd. Rotor




200 720 588 $101,291 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258A-3HB10

200 600 588 $101,030 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258B-5HB10

200 514 588 $135,537 Copper Bar Ball - Grease Lube Self Bi-directional CGG460 1RN258E-7HE10

200 450 588 $135,537 Copper Bar Ball - Grease Lube Self Bi-directional CGG460 1RN258E-9HE10


250 600 588 $111,640 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258D-5HB10

250 514 588 $138,195 Copper Bar Ball - Grease Lube Self Bi-directional CGG460 1RN258F-7HE10


300 600 588 $119,610 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258E-5HB10

300 514 5810 $143,482 Copper Bar Ball - Grease Lube Self Bi-directional CGG460 1RN258G-7HE10


350 600 5810 $127,555 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258G-5HB10


400 600 5810 $138,280 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258H-5HB10

450 720 588 $122,268 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258F-3HB10

450 600 5810 $157,741 Copper Bar Ball - Grease Lube Self Bi-directional CGG460 1RN258J-5HE10





600 720 5810 $141,814 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG460 1RN258J-3HB10





ENCLOSURETEWAC

Hertz60 Volt2300-



2Part 4Section

Page

1

Date 02/11


PricesStd. Rotor






200 514 588 $139,052 Copper Bar Ball - Grease Lube Self Bi-directional CGG2300 1RN258F-7HE50

200 450 6811 $236,436 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268A-9HE50












350 450 6811 $244,988 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268B-9HE50









450 450 6811 $254,103 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268D-9HE50





500 450 6811 $259,994 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268E-9HE50




600 514 6811 $264,299 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268F-7HE50

600 450 6811 $270,193 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268G-9HE50




700 600 6811 $248,218 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268C-5HE50

700 514 6813 $288,346 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268H-7HE50

700 450 6813 $311,900 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268M-9HE50





800 514 6813 $306,009 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268L-7HE50

ENCLOSURETEWAC

Hertz60 Volt2300-



3Part 4Section

Page

1

Date 02/11


PricesStd. Rotor





900 900 5812 $172,192 Copper Bar Ball - Grease Lube Self Bi-directional CGG2300 1RN258L-8HE50






1000 900 5812 $182,284 Copper Bar Ball - Grease Lube Self Bi-directional CGG2300 1RN258P-8HE50


1000 600 6813 $294,237 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268J-5HE50






1500 3600 5810 $137,380 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG2300 1RN258G-2HB50






1750 1800 5812 $154,159 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG2300 1RN258L-4HB50




2000 3600 5810 $148,785 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG2300 1RN258G-2HB50




2250 3600 5812 $165,789 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG2300 1RN258J-2HB50


2250 1200 6813 $294,237 Copper Bar Sleeve - Oil Lube Self Bi-directional CGG2300 1RN268K-6HE50

2500 3600 5812 $173,340 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG2300 1RN258L-2HB50



3000 3600 6811 $250,000 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG2300 1RN268C-2HE50


3500 3600 6813 $274,674 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG2300 1RN268E-2HE50


4000 3600 6813 $280,719 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG2300 1RN268F-2HE50


4500 3600 6813 $286,760 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG2300 1RN268G-2HE50

5000 3600 6813 $292,812 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG2300 1RN268H-2HE50


ENCLOSURETEWAC

Hertz60 Volt4000-



4Part 4Section

Page

1

Date 02/11


PricesStd. Rotor


















































ENCLOSURETEWAC

Hertz60 Volt4000-



5Part 4Section

Page

1

Date 02/11


PricesStd. Rotor
























1750 1800 5812 $160,881 Alum. Diecast Ball - Grease Lube Self Bi-directional CGG4000 1RN258M-4HB40




2000 3600 5810 $151,586 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG4000 1RN258G-2HB40












3500 3600 6813 $277,754 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG4000 1RN268E-2HE40




4500 3600 6813 $289,840 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG4000 1RN268G-2HE40



ENCLOSURETEWAC

Hertz60 Volt6600-



6Part 4Section

Page

1

Date 02/11


PricesStd. Rotor



























700 1200 5810 $159,073 Copper Bar Ball - Grease Lube Self Bi-directional CGG6600 1RN258H-6HE10

700 900 5812 $172,192 Copper Bar Ball - Grease Lube Self Bi-directional CGG6600 1RN258K-8HE10















1000 1200 5812 $183,402 Copper Bar Ball - Grease Lube Self Bi-directional CGG6600 1RN258M-6HE10




ENCLOSURETEWAC

Hertz60 Volt6600-



7Part 4Section

Page

1

Date 02/11


PricesStd. Rotor




1250 3600 5810 $141,072 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG6600 1RN258F-2HB10













2000 3600 5812 $177,275 Alum. Diecast Sleeve - Oil Lube Self Uni-directional CGG6600 1RN258K-2HB10








3000 3600 6813 $259,671 Copper Bar Sleeve - Oil Lube Self Uni-directional CGG6600 1RN268D-2HE10






ENCLOSURETEFC

Hertz60 Volt460-



1Part 5Section

Page

1

Date 02/11


PricesStd. Rotor




200 900 509 $50,991 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250M-8LA10

200 720 588 $70,906 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA258F-3LA10

200 600 588 $70,906 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA258F-5LA10

250 1800 509 $45,654 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250H-4LA10

250 1200 509 $48,027 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250L-6LA10

250 900 5011 $57,424 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250P-8LA10

250 720 588 $72,289 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA258G-3LA10

250 600 5810 $80,708 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA258H-5LA10

300 3600 509 $49,103 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250H-2LA10

300 1800 509 $47,383 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250K-4LA10


300 900 5013 $72,327 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250S-8LA10


300 600 5810 $103,661 Copper Bar Ball - Grease Lube Self Bi-directional CZ460 1LA258K-5NA10

350 3600 509 $50,972 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250K-2LA10

350 1800 509 $48,133 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250K-4LA10


350 900 5013 $77,180 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250W-8LA10

350 720 5810 $86,071 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA258J-3LA10

350 600 708 $134,885 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270B-5NA10

400 3600 509 $51,778 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250K-2LA10

400 1800 5011 $50,593 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250L-4LA10

400 1200 5011 $59,244 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ460 1LA250Q-6LA10


400 720 708 $131,773 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270A-3NA10

400 600 708 $141,121 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270D-5NA10

450 3600 509 $52,835 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250L-2LA10




450 720 708 $138,006 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270C-3NA10

450 600 708 $144,233 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270E-5NA10

500 3600 5011 $58,925 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250M-2LA10



500 900 5812 $118,425 Copper Bar Ball - Grease Lube Self Bi-directional CZ460 1LA258M-8NA10


500 600 708 $148,911 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270G-5NA10

600 3600 5011 $62,657 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250P-2LA10



600 900 5812 $129,074 Copper Bar Ball - Grease Lube Self Bi-directional CZ460 1LA258T-8NA10



ENCLOSURETEFC

Hertz60 Volt460-



2Part 5Section

Page

1

Date 02/11


PricesStd. Rotor




700 3600 5013 $77,433 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ460 1LA250R-2LA10


700 1200 5812 $121,979 Copper Bar Ball - Grease Lube Self Bi-directional CZ460 1LA258P-6NA10




800 1800 5013 $88,080 Copper Bar Ball - Grease Lube Self Bi-directional CZ460 1LA250U-4NA10

800 1200 708 $134,885 Copper Bar Ball - Grease Lube Self Bi-directional CGZ460 1LA270B-6NA10




ENCLOSURETEFC

Hertz60 Volt2300-



3Part 5Section

Page

1

Date 02/11


PricesStd. Rotor




200 3600 509 $48,131 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250F-2LN20

200 1800 509 $45,509 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250F-4LN20

200 1200 509 $47,195 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250K-6LN20

200 900 509 $51,879 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250M-8LN20

200 720 588 $75,880 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA258D-3LN20

200 600 5810 $85,077 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA258H-5LN20

250 3600 509 $49,991 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250H-2LN20


250 1200 509 $48,893 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250L-6LN20

250 900 5011 $60,110 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250Q-8LN20

250 720 588 $77,419 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA258G-3LN20

250 600 5810 $88,826 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA258J-5LN20




300 900 5013 $73,254 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250S-8LN20


300 600 708 $136,553 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA270B-5NN20

350 3600 509 $51,857 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250K-2LN20


350 1200 5011 $58,287 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250P-6LN20

350 900 5013 $78,106 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250W-8LN20


350 600 708 $142,783 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA270D-5NN20






400 600 708 $145,895 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA270E-5NN20

450 3600 509 $53,720 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250L-2LN20






500 3600 5011 $59,813 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250M-2LN20



500 900 5812 $117,381 Copper Bar Ball - Grease Lube Self Bi-directional CZ2300 1LA258L-8NN20


500 600 788 $195,844 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA278F-5NN20

ENCLOSURETEFC

Hertz60 Volt2300-



4Part 5Section

Page

1

Date 02/11


PricesStd. Rotor




600 3600 5011 $63,545 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250P-2LN20



600 900 5812 $131,587 Copper Bar Ball - Grease Lube Self Bi-directional CZ2300 1LA258T-8NN20


600 600 788 $199,414 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA278G-5NN20

700 3600 5013 $78,408 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250R-2LN20

700 1800 5013 $71,307 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250R-4LN20

700 1200 5812 $124,478 Copper Bar Ball - Grease Lube Self Bi-directional CZ2300 1LA258P-6NN20

700 900 708 $139,671 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA270C-8NN20



800 3600 5013 $82,514 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ2300 1LA250T-2LN20

800 1800 5013 $76,165 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ2300 1LA250U-4LN20





900 3600 5810 $118,489 Copper Bar Ball - Grease Lube Self Uni-directional CZ2300 1LA258J-2NN20

900 1800 5810 $107,466 Copper Bar Ball - Grease Lube Self Bi-directional CZ2300 1LA258K-4NN20





1000 3600 5812 $150,679 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ2300 1LA258P-2NN20





1000 600 880 $282,619 Copper Bar Ball - Grease Lube Self Bi-directional CGZ2300 1LA288H-5NN20

1250 3600 788 $193,102 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ2300 1LA278B-2NN20

1250 1800 788 $185,150 Copper Bar Ball - Grease Lube Self Uni-directional CGZ2300 1LA278C-4NN20




1500 3600 788 $206,067 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ2300 1LA278E-2NN20




1750 3600 880 $287,764 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ2300 1LA288C-2NN20

1750 1800 788 $188,717 Copper Bar Ball - Grease Lube Self Uni-directional CGZ2300 1LA278D-4NN20



2000 1800 880 $263,156 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ2300 1LA288D-4NN20

2250 1800 880 $277,760 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ2300 1LA288G-4NN20


ENCLOSURETEFC

Hertz60 Volt4000-



5Part 5Section

Page

1

Date 02/11


PricesStd. Rotor













































ENCLOSURETEFC

Hertz60 Volt4000-



6Part 5Section

Page

1

Date 02/11


PricesStd. Rotor









600 600 880 $247,003 Copper Bar Ball - Grease Lube Self Bi-directional CGZ4000 1LA288A-5NN50



















1000 3600 5812 $152,112 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ4000 1LA258P-2NN50

1000 1800 5812 $129,286 Copper Bar Ball - Grease Lube Self Bi-directional CZ4000 1LA258R-4NN50





1250 3600 788 $194,942 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ4000 1LA278B-2NN50














2250 1800 880 $279,408 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ4000 1LA288G-4NN50


ENCLOSURETEFC

Hertz60 Volt6600-



7Part 5Section

Page

1

Date 02/11


PricesStd. Rotor



















400 1800 5011 $58,484 Alum. Diecast Ball - Grease Lube Self Bi-directional CZ6600 1LA250N-4LN10






























ENCLOSURETEFC

Hertz60 Volt6600-



8Part 5Section

Page

1

Date 02/11


PricesStd. Rotor




800 3600 5812 $144,240 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ6600 1LA258K-2NN10






900 3600 5812 $148,296 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CZ6600 1LA258L-2NN10

900 1800 5812 $125,944 Copper Bar Ball - Grease Lube Self Bi-directional CZ6600 1LA258M-4NN10

















1750 3600 880 $311,128 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CGZ6600 1LA288F-2NN10




ENCLOSURETEAAC

Hertz60 Volt460-



1Part 6Section

Page

1

Date 02/11


PricesStd. Rotor




200 720 588 $88,588 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258A-3JB10

200 600 588 $107,726 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258E-5JB10

200 514 5810 $132,787 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258G-7JE10

200 450 5812 $147,524 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258J-9JE10

250 720 588 $99,503 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258D-3JB10

250 600 5810 $128,024 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258H-5JB10


250 450 5812 $160,744 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258M-9JE10


300 720 5810 $114,921 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258F-3JB10

300 600 5810 $131,665 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258J-5JB10




350 600 5812 $155,738 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258L-5JE10



400 600 5812 $164,905 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258P-5JE10


450 900 5810 $116,860 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258G-8JB10









600 900 5812 $149,250 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258K-8JE10



700 1200 5810 $143,951 Copper Bar Ball - Grease Lube Self Uni-directional CAZ460 1RQ258H-6JE10



800 1800 5810 $135,152 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ460 1RQ258K-4JB10


ENCLOSURETEAAC

Hertz60 Volt2300-



2Part 6Section

Page

1

Date 02/11


PricesStd. Rotor




200 720 588 $91,363 Alum. Diecast Ball - Grease Lube Self Uni-directional CAZ2300 1RQ258B-3JB50












300 450 6811 $243,732 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268G-9JE50




350 514 6811 $227,445 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268D-7JE50

350 450 6813 $279,587 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268K-9JE50




400 514 6811 $237,764 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268F-7JE50

400 450 6813 $291,519 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268M-9JE50











500 600 6811 $233,404 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268E-5JE50









ENCLOSURETEAAC

Hertz60 Volt2300-



3Part 6Section

Page

1

Date 02/11


PricesStd. Rotor













800 900 6811 $213,897 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268C-8JE50

800 720 6813 $267,655 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268H-3JE50






















1750 1200 6813 $279,587 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268L-6JE50

2000 3600 5812 $178,709 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ2300 1RQ258L-2JE50


2250 3600 6811 $235,038 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ2300 1RQ268C-2JE50

2250 1800 6813 $257,286 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ2300 1RQ268J-4JE50

2500 3600 6813 $244,792 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ2300 1RQ268D-2JE50


3000 3600 6813 $267,435 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ2300 1RQ268E-2JE50


3500 3600 6813 $280,367 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ2300 1RQ268G-2JE50

4000 3600 6813 $290,508 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZB2300 1RQ268H-2HE50


ENCLOSURETEAAC

Hertz60 Volt4000-



4Part 6Section

Page

1

Date 02/11


PricesStd. Rotor














































ENCLOSURETEAAC

Hertz60 Volt4000-



5Part 6Section

Page

1

Date 02/11


PricesStd. Rotor





































2000 3600 6811 $229,585 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ4000 1RQ268B-2JE40








3500 3600 6813 $283,658 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ4000 1RQ268G-2JE40

4000 3600 6813 $293,796 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZB4000 1RQ268H-2HE40


ENCLOSURETEAAC

Hertz60 Volt6600-



6Part 6Section

Page

1

Date 02/11


PricesStd. Rotor














350 720 6811 $213,519 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ6600 1RQ268A-3JE10







400 720 6811 $219,487 Copper Bar Sleeve - Oil Lube Self Uni-directional CAZ6600 1RQ268B-3JE10

















600 1800 5810 $134,595 Copper Bar Ball - Grease Lube Self Uni-directional CAZ6600 1RQ258F-4JE10










ENCLOSURETEAAC

Hertz60 Volt6600-



7Part 6Section

Page

1

Date 02/11


PricesStd. Rotor
































3000 3600 6813 $293,419 Copper Bar Sleeve - Oil Lube Flood Lube Required Uni-directional CAZ6600 1RQ268H-2JE10


ENCLOSUREODP

Hertz50 Volt3300-



1Part 1ASection

Page

1

Date 02/11


PricesStd. Rotor











































900 3000 5010 $68,119 Alum. Diecast Ball - Grease Lube Self Uni-directional CG3300 1RA250M-2HB00







ENCLOSUREODP

Hertz50 Volt3300-



2Part 1ASection

Page

1

Date 02/11


PricesStd. Rotor







1500 3000 5810 $105,312 Copper Bar Ball - Grease Lube Self Uni-directional CG3300 1RA258G-2HE00



1750 3000 5812 $122,393 Copper Bar Ball - Grease Lube Self Uni-directional CG3300 1RA258H-2HE00

ENCLOSUREODP

Hertz50 Volt6000-



3Part 1ASection

Page

1

Date 02/11


PricesStd. Rotor

























1750 3000 5812 $137,315 Copper Bar Ball - Grease Lube Self Uni-directional CG6000 1RA258K-2HE60

ENCLOSUREWPI

Hertz50 Volt3300-



1Part 2ASection

Page

1

Date 02/11


PricesStd. Rotor











































900 3000 5010 $68,771 Alum. Diecast Ball - Grease Lube Self Uni-directional CG3300 1RA250M-2HB00







ENCLOSUREWPI

Hertz50 Volt3300-



2Part 2ASection

Page

1

Date 02/11


PricesStd. Rotor










1750 3000 5812 $123,773 Copper Bar Ball - Grease Lube Self Uni-directional CG3300 1RA258H-2HE00

ENCLOSUREWPI

Hertz50 Volt6000-



3Part 2ASection

Page

1

Date 02/11


PricesStd. Rotor

























1750 3000 5812 $138,695 Copper Bar Ball - Grease Lube Self Uni-directional CG6000 1RA258K-2HE60

ENCLOSUREWPII

Hertz50 Volt3300-



1Part 3ASection

Page

1

Date 02/11


PricesStd. Rotor














300 750 5010 $79,330 Copper Bar Ball - Grease Lube Self Bi-directional CGII3300 1RP250R-8HE00





























900 3000 5010 $72,457 Alum. Diecast Ball - Grease Lube Self Uni-directional CGII3300 1RP250M-2HB00







ENCLOSUREWPII

Hertz50 Volt3300-



2Part 3ASection

Page

1

Date 02/11


PricesStd. Rotor







1500 3000 5810 $111,732 Copper Bar Ball - Grease Lube Self Uni-directional CGII3300 1RP258G-2HE00



1750 3000 5812 $128,813 Copper Bar Ball - Grease Lube Self Uni-directional CGII3300 1RP258H-2HE00

ENCLOSUREWPII

Hertz50 Volt6000-



3Part 3ASection

Page

1

Date 02/11


PricesStd. Rotor























1250 1500 5812 $139,387 Copper Bar Ball - Grease Lube Self Bi-directional CGII6000 1RP258M-4HE60

1500 3000 5810 $120,564 Copper Bar Ball - Grease Lube Self Uni-directional CGII6000 1RP258G-2HE60

1750 3000 5812 $143,735 Copper Bar Ball - Grease Lube Self Uni-directional CGII6000 1RP258K-2HE60

ENCLOSURETEWAC

Hertz50 Volt3300-



1Part 4ASection

Page

1

Date 02/11


PricesStd. Rotor




















1250 3000 5810 $133,212 Alum. Diecast Ball - Grease Lube Self Uni-directional CGG3300 1RN258E-2HB00



1500 3000 5810 $156,368 Copper Bar Ball - Grease Lube Self Uni-directional CGG3300 1RN258G-2HE00



1750 3000 5812 $173,449 Copper Bar Ball - Grease Lube Self Uni-directional CGG3300 1RN258H-2HE00

ENCLOSURETEWAC

Hertz50 Volt6000-



2Part 4ASection

Page

1

Date 02/11


PricesStd. Rotor












1250 1500 5812 $183,070 Copper Bar Ball - Grease Lube Self Bi-directional CGG6000 1RN258M-4HE60

1500 3000 5810 $165,199 Copper Bar Ball - Grease Lube Self Uni-directional CGG6000 1RN258G-2HE60

1750 3000 5812 $188,371 Copper Bar Ball - Grease Lube Self Uni-directional CGG6000 1RN258K-2HE60

ENCLOSURETEFC

Hertz50 Volt3300-



1Part 5ASection

Page

1

Date 02/11


PricesStd. Rotor























450 3000 5011 $63,009 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ3300 1LA250N-2LN00












700 3000 5810 $103,813 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ3300 1LA258J-2LN00





ENCLOSURETEFC

Hertz50 Volt6000-



2Part 5ASection

Page

1

Date 02/11


PricesStd. Rotor




















500 3000 5810 $97,882 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ6000 1LA258G-2LN60



600 3000 5810 $106,738 Alum. Diecast Ball - Grease Lube Self Uni-directional CZ6000 1LA258J-2LN60





ENCLOSURETEAAC

Hertz50 Volt3300-



1Part 6ASection

Page

1

Date 02/11


PricesStd. Rotor



















ENCLOSURETEAAC

Hertz50 Volt6000-



2Part 6ASection

Page

1

Date 02/11


PricesStd. Rotor
























Section 1

Part 5B Page 1 Date 02/11

AC Squirrel-Cage Induction 1.0 Service Factor Class F Insulation 80 deg. C Rise by Resistance 40 deg. C Ambient

Base List Prices, Frame, and Features

TEFC Enclosure per IEEE 841 Std- 2009 (Order Code R61 / Category 2)

This specification addresses motor requirements on TEFC, anti-friction bearing motors through 500 HP. The Basic List Prices in the following tables include special features of this specification which are but not limited to;

IP55 degree of protection which includes rotating shaft seals to provide maximum protection against contaminants entering the motor along the shaft

Minimum guaranteed full load efficiency per IEEE 841 Table 2 (See General Comment #2) Cast iron fan housing Corrosion protection of rotor Alemite grease fittings Precision balance Maximum bearing temperature limits of 50C for 2-pole, 45C for 4-pole and slower Frame breather-drain Sealed leads between motor and terminal box Max. shaft indicator reading of 0.0015-in. for direct-connected, 0.002-in. if belt drive Motor foot flatness not to exceed 0.005-in. Special nameplate and auxiliary tags Testing per paragraph 9.2

General Comments to IEEE 841- 2009 All proposals to must contain the following comments in addition to any other applicable comments and/or exceptions already taken and depending upon the quotation request;

1. Para 6.8: Taking exception to 90 dbA sound power level. Quoting typical sound pressure level in dBA as measured per NEMA MG1, Part 9 at 3 feet and at no load.

2. Para 8.0: The minimum and nominal full load efficiencies per Table 2 are based upon efficiency evaluation per

IEEE 112-2004, Methods E1 or F1 with assumed stray load loss.

Include Comment 3 if space heaters are quoted as a base feature or option 3. Para. 11.b: Taking exception and quoting space heaters with 160 deg. C maximum sheath temperature. Include Comment 4 if motor if a hazardous location is not specified 4. Para 3.1.e: Motor offered is based on a non-hazardous area application. Include Comment 5 if motor is not direct-connected and is to be V-belt drive 5. Para 6.1.d: Taking exception and quoting L10 life of 17,500 hours pending receipt and review of motor and driven

sheave sizes as well as the size, type and number of belts. Include Comment 6 if motor is 2-pole (3600 or 3000 RPM) 6. Para 6.9: Taking exception and quoting maximum vibration of 0.10 ips unfiltered as measured on the bearing

housing.


Section 1




TEFC Enclosure per IEEE 841 Std- 2009 - continued (Order Code R61 / Category 2)

460 Volt

HP RPM Frame Min.

Guar. FL Eff *

Basic List

Price

Std. Rotor Construction

Cooling Fan

Typ. Noise dBA

Rotation Type MRPD

200 900 509 93.6 $57,972 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-8LA10-Z

250 900 5011 93.6 $64,405 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-8LA10-Z

300 900 5013 – $80,235 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250S-8LA10-Z

350 1200 5011 95.0 $80,078 Copper Bar Bronze 80 Bi-directional CZ 1LA250P-6NA10-Z

350 900 5013 – $85,087 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250W-8LA10-Z

400 3600 509S 95.0 $57,925 Alum. Diecast Conductive

Plastic 86 Uni-directional CZ 1LA250L-2LA10-Z


400 1200 5011 95.0 $81,898 Copper Bar Bronze 80 Bi-directional CZ 1LA250Q-6NA10-Z

400 900 5810 – $88,833 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-8LA10-Z


Plastic 85 Uni-directional CZ 1LA250N-2LA10-Z


450 1200 5013 95.0 $84,161 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250W-6LA10-Z

450 900 5810 – $96,376 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258K-8LA10-Z


Plastic 85 Uni-directional CZ 1LA250P-2LA10-Z


500 1200 5810 95.0 $88,833 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LA10-Z

500 900 5812 – $129,060 Copper Bar Bronze 80 Bi-directional CZ 1LA258M-8NA10-Z

*Per IEEE841-2009, Table 2.


Section 1





2300 Volt

HP RPM Frame Min.

Guar. FL Eff

Basic List

Price


Cooling Fan

Typ. Noise dBA

Rotation Type MRPD


Plastic 86 Uni-directional CZ 1LA250H-2LN20-Z

250 1800 509 94.1 $52,490 Alum. Diecast Bronze 84 Bi-directional CZ 1LA250K-4LN20-Z

250 1200 509 94.1 $55,873 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250M-6LN20-Z

250 900 5011 94.1 $67,091 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250Q-8LN20-Z





300 900 588 94.1 $84,662 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258F-8LN20-Z


Plastic 86 Uni-directional CZ 1LA250K-2LN20-Z


350 1200 5011 94.1 $65,268 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN20-Z

350 900 588 94.1 $85,544 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258G-8LN20-Z



400 1800 5011 94.1 $58,412 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250L-4LN20-Z


400 900 5810 94.1 $96,951 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258J-8LN20-Z


Plastic 86 Uni-directional CZ 1LA250L-2LN20-Z


450 1200 5013 94.1 $82,173 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250T-6LN20-Z



Plastic 85 Uni-directional CZ 1LA250M-2LN20-Z


500 1200 5810 94.1 $93,202 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN20-Z

500 900 5812 94.1 $125,506 Copper Bar Bronze 80 Bi-directional CZ 1LA258L-8NN20-Z



Section 1





4000 Volt

HP RPM Frame Min.

Guar. FL Eff

Basic List

Price


Cooling Fan

Typ. Noise dBA

Rotation Type MRPD





250 900 588 94.1 $84,798 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258E-8LN50-Z





300 900 588 94.1 $85,408 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258F-8LN50-Z




350 1200 5011 94.1 $66,572 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250P-6LN50-Z

350 900 588 94.1 $86,337 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258G-8LN50-Z



400 1800 5011 94.1 $59,668 Alum. Diecast Bronze 85 Bi-directional CZ 1LA250L-4LN50-Z






450 1200 5013 94.1 $85,500 Alum. Diecast Bronze 80 Bi-directional CZ 1LA250V-6LN50-Z



Plastic 85 Uni-directional CZ 1LA250M-2LN50-Z


500 1200 5810 94.1 $94,650 Alum. Diecast Bronze 80 Bi-directional CZ 1LA258H-6LN50-Z

500 900 5812 94.1 $133,857 Copper Bar Bronze 80 Bi-directional CZ 1LA258P-8NN50-Z


Section 2

Part 1 Page 1 Date 02/11


Modifications & Accessories

Adjustable Speed Drives

The MRPD designation for motors used with ASDs is indicated in the motor’s basic MRPD structure. Refer to the Section 1, Part MRPD for more details. Motors to be used with filtered VFDs and are 4:1 VT or are 2:1 CT have a minimum base Category 1.

Two-pole ratings in any enclosure in a 6813 frame and two-pole ratings in TEFC enclosure in a 5812, 708, 788, or 880 frame are not suitable for use with an ASD application. Refer to factory for price and availability. Motors driven from an adjustable frequency control power source are subject to harmonics caused by non-sinusoidal wave shapes and voltage spikes. These may result in increased heating, decreased torque capability, and excessive shaft voltages; therefore, standard motor designs may not be suitable. Refer exact requirements including application (variable or constant torque), details of speed range, and type of inverter being used to factory for price and availability.

Policy Statement IGBT/BRG Siemens Norwood AC Induction Motors IGBT Control Induced Bearing Currents

Siemens has had considerable, successful experience operating motors in the field in applications that utilize IGBT-type adjustable frequency controls. Throughout the industry, however, a few variable frequency control applications and installations have been shown to produce currents in the bearings of motors they control. Siemens Drives and Siemens Systems groups have the expertise and experience necessary to ensure the your installation is configured such that problem-free operation is attained. However, when Siemens motors are to be used with controls manufactured other companies, we defer system configuration details to that control manufacturer. If the application is such that a problem due to bearing currents could potentially occur then one of the following solutions should be implemented with the motor and control system; a) Use of a control output filter that reduces common mode voltage and the motor non-drive

end bearing should be insulated. b) For 500 frame and larger motors in non-hazardous locations, insulate the drive end and

non-drive end bearing and add a shaft grounding brush. Unless the grounding brush is provided on the motor drive end, an insulated coupling must be utilized to protect non-insulated bearings in the load equipment.

Motors constructed in accordance with (b) are available. Consult factory for price and availability.

Section 2




Altitude - Above 3300 Feet Motors are designed to operate within Class B temperature rise limits when operated at rated horsepower at altitudes up to 3300 ft. Option Description Category List Adder

From 3301 - 5000 ft elevation - Utilization to Class F 1 3% For operation above 5500 ft. altitude, refer to factory for frame size and price.

Ambient Motors are designed to operate within certain maximum temperature rise limits when the motor is operated in ambient temperatures from 0 C to 40 C. For Class B rated motors, the limit is 80 C rise by resistance at 1.0 service factor. Option Description Category List Adder

From +40oC up to +45oC - Utilization to Class F 1 2%

From +46oC up to +50oC - Utilization to Class F 1 4% NOTE: Sleeve bearings may require flood lubrication in an ambient above 40 degrees C. Consult factory for determination of bearing lubrication requirement in ambient conditions above 40 degrees C. Conversely, if a sleeve bearing motor is known to be subjected to temperatures below 0C, oil sump heaters are required and should be added to price…See List Adder under Bearings - Oil Sump Heaters.

Section 2




API 541 – 3rd or 4th Edition (Please refer all inquiries to the factory)

API 547 – 2005 (Option Code R67 / Category 3) I. Basic Scope

Ratings (hp)

# Poles Voltage (V) Mounting Enclosures Rotor Mat'l Bearings Frames

250 - 3000 4 - 8 2300 - 6600 Horizontal TEFC or WPII Copper

> 1000 hp Sleeve 500 - 680

< 800 2 2300 - 6600 Horizontal TEFC Aluminum Sleeve 500 - 580

< 1250 2 2300 - 6600 Horizontal WPII Aluminum <=

1000 hp Sleeve 500 - 580

1.2 Usual Service Conditions 1.3 Unusual Service Conditions

a) -25 oC - 40 oC a) Exposure to:

b) <= 3300 ft 1) Combustive, explosive, abrasive or conductive dust

c) Indoor or outdoor, severe duty applications 2) Dirt interfering with normal ventilation

d) Horizontal mounting 3) Nuclear radiation

e) Installation in Div. 2 or Zone 2 locations 4) Abnormal shock or vibrations

f) Constant frequency & sign wave 5) Abnormal thrusts

g) Not subject to transient voltages 6) Higher altitudes or ambient temperatures

h) Direct coupled 7) Recip or positive displacement loads

b) Voltage or frequency variations greater than NEMA

c) Supply voltage unbalance greater than NEMA

d) Operation at speeds other than rated speed

e) VFD applications

f) Load inertia greater or starting conditions worse than NEMA

g) Vertical mounting

Section 2




II. Siemens Standard Motor Features for API 547 - 2005

Paragraph Accessory / Motor Feature Included 2.1.1 1.0 Service factor on sine wave

2.1.2 85 dB(A) @ 3 feet, unloaded, free-field, sine wave power, guaranteed (except as noted in the comments section)

2.2.2.7 Maximum 650% inrush current (based on NEMA inertia, standard centrifugal loads and FV starting) 2.3.1 Class B Temperature @ 1.0 SF by Embedded Detector (RTD) 2.4.1.2 & 2.4.1.3 300 series stainless steel screens 2.4.1.2 d. Automatic drains (for TEFC motor only) 2.4.1.3 Stainless steel filters & provisions for differential pressure switch (WPII enclosures only) 2.4.2.2 & 2.4.2.4 Vertical jacking screws

Mounting surface criteria

a. Mounting surface machined to 250 microinches

b. Same horizontal plane within 0.005"

c. Foot flatness within 0.005"

d. Different mounting planes within 0.002"/foot

2.4.2.7

f. Mounting surface shall be machined or spot-faced to a diameter of 2x the hole diameter 2.4.4 300 series stainless steel hardware

2.4.5.2 Copper rotor with phosphor-free braze material for >1000 hp (Aluminum die-cast for <=1000 hp) - please refer to Typical Options Section for pricing of copper rotor on ratings <=1000 hp, if required by the customer.

2.4.6 "Stiff-rotor" motor design except 2-pole, WPII in 680 frames and 2-pole TEFC in 5812, 708, 788, & 880 frames

2.4.7.1.1 Split-sleeve bearings 2.4.7.2.3 Constant Level Oilers (All Sleeve bearings) 2.4.7.3.1 IP55 Shaft seals - please refer to comments & exceptions section 2.4.7.4.1 Both bearings insulated 2.4.9.3 Magnetic center and end float indication 2.4.10 C5 core plate 2.4.11 Special nameplates adjacent to all boxes and auxiliary devices 3.1.1 Main terminal box to have minimum dimensions based on NEMA MG1, Part 20 = ANSI Type II 3.2.1 100 ohm stator RTDs (2/phase) - PT100 3.3 Bearing RTDs to be supplied with sleeve bearings 3.4 Low temperature (200 oC) space heaters to be supplied

Routine testing – unwitnessed - includes (In addition to Siemens standard routine testing):

- High-potential of stator-mounted devices

- Polarization index 4.1.2

- No-load bearing temperature stabilization run

4.1.3.1 Special balancing to meet vibration limits of 0.10 ips and spectrum frequency sweeps as defined by 4.1.3.1.

Standard Ground pads

Section 2




III. API 547 – 2005 List Adders & Typical Options

Total Adder for API 547 - 2005 List Comments <= 1000 hp

500 Frames $36,618 Aluminum Rotors Except 588 or 5812 frames – 6 pole applications $37,067 Aluminum Rotors

580 Frames For 588 or 5812 frames – 6 pole applications $38,539 Aluminum Rotors

> 1000 hp 500 Frames $37,301 Copper Rotors

Except 588 or 5812 frames – 6 pole applications $38,325 Copper Rotors

580 Frames For 588 or 5812 frames – 6 pole applications $39,797 Copper Rotors Except 6811 frame – 6 pole applications $37,274 Copper Rotors – Standard

WPII

680 Frames For 6811 frame – 6 pole applications $39,244 Copper Rotors - Standard

<= 1000 hp

All except 4 pole applications $39,933 Aluminum Rotors 500 Frames

4 pole applications $42,945 Aluminum Rotors

2 & 4 pole applications $47,610 Aluminum Rotors 580 Frames

6 pole & slower applications $42,129 Aluminum Rotors

> 1000 hp

2 & 4 pole applications $47,610 Aluminum Rotors 580 Frames

6 pole & slower applications $42,129 Aluminum Rotors

2 pole applications $44,023 Sleeve is standard 708 Frame

4 pole & slower applications $51,299 Copper Rotors – Standard

2 pole applications $44,350 Sleeve is standard

4 pole applications $60,205 Copper Rotors – Standard

TEFC

788 Frame

6 pole & slower applications $51,606 Copper Rotors – Standard 2 pole applications $44,659 Sleeve is standard

880 Frame 4 pole & slower applications $50,630 Copper Rotors – Standard

Typical API 547 Options: List Price Applicable

Frames 2.4.1.3 S35 = Differential Pressure SPDT Switch $1,678 All Frames 2.4.5.1.2 A02 = Vibration Probes = Bently-Nevada $24,182 All Frames 2.4.5.2 R68 = Copper Rotors for <= 1000 hp $15,673 500 Frames 2.4.5.2 R68 = Copper Rotors for <= 1000 hp $18,806 580 Frames Testing Options: Special Tests

Unwitnessed Frame Dependent Refer to Tests

Section a) Complete Test

Witnessed Frame Dependent Refer to Tests

Section

Unwitnessed $6,566 for WPII $8,410 for TEFC All Frames

b) Unbalance Response

Witnessed $10,253 for WPII $13,939 for TEFC All Frames

Unwitnessed Frame Dependent Refer to Tests

Section

4.1.5

d) Sealed Winding Conformance

Witnessed Frame Dependent Refer to Tests

Section

Section 2




IV. Comments, Exceptions & Clarifications to API 547 - 2005

1. General: The pricing offered is for the base motor including Siemens standard routine (unwitnessed) testing. 2. Para 1.2.a: Motors are quoted for 0 to 40oC as standard. Oil sump heaters should be added for self-lube

applications below 0oC. 3. Para 1.2.c: Motors are not suitable for offshore or severe corrosive duty as standard. Motor paint is Siemens

standard if not otherwise specified. 4. Para 2.1.2: Refer to the Section V. Noise Levels for API 547 – 2005 and make the appropriate exception per

Note 1. 5. Para 2.2.2.3: Minimum 90% voltage starting is being proposed pending receipt and review of the load torque

vs. speed curve and inertia. 6. Para 2.4.1.2 & 2.4.1.3: If specified on Data Sheet or if installation is an offshore platform, we are taking

exception to 316 stainless steel and offering 300 series stainless steel. 7. Para 2.4.6: Refer to Section II. Siemens Standard Motor Features for API 547 – 2005 and take exception if

applicable. 8. Para 2.4.7.1.5: The bearings used on 708, 788, & 880 frames feature line-to-line to clearance fit by design. 9. Para 2.4.7.2.1 (WPII only): Taking exception to IP55-rated external shaft seals. 10. Para 2.4.7.3.1: The seals provided on TEFC motors are not split. 11. Para 3.4: As standard, motor space heaters shall have a maximum sheath temperature of 200 deg.C. On

TEFC and some WPII motors, the heaters are a flexible type design that mounts to the ends of the stator coils for optional efficiency - these type are not removable.

12. Para 4.1.2: Only stator & stator-mounted devices will be high-potential tested. 13. Para 4.2.1: The motor(s) offered will be provided with Siemens standard domestic packing. The motor(s) will

not receive long-term storage preparation. If long-term storage preparation is required, please advise and Siemens will offer at an additional price.

14. Para 4.1.3.2: Non-contacting eddy current probe measurements will only be taken when the probes are purchased with the motor. If only provisions for probes are purchased, the vibration limits per paragraph 4.1.3.1 shall apply.

V. Noise Levels for API 547 - 2005

Low Noise Values for API 547 - Guaranteed, No-load, Free-field, 3 feet WPII Enclosures 500 Frame <= 84 dB(A) - All speeds 580 Frame <= 85 dB(A) - All speeds 680 Frame <= 85 dB(A) - 2 pole / <= 84 dB(A) – all other speeds TEFC Enclosures 500 Frame <= 90 dB(A) - 2 pole / <=85 dB(A) – all other speeds 580 Frame <= 85 dB(A) - All speeds 708 Frame <= 84 dB(A) - All speeds 788 Frame <= 85 dB(A) - All speeds except 6 pole which = 88 dB(A)

880 Frame <= 85 dB(A) - 2 pole and 8 pole & slower 880 Frame = 91 dB(A) - 4 pole

880 Frame = 87 dB(A) - 6 pole

Notes: 1. The noise levels shown above include sound attenuation measures. Also note that due to the sound attenuation

measures, the standard dimensional print will not apply. Please refer to the factory for specific dimensions. Please take appropriate exception to Para 2.1.2 of the API 547 Standard on those that are higher than 85 dB(A).

2. Please refer to the factory for frames not listed here or for motors with separately driven blowers.

Section 2




Assembly As a standard, motors are supplied for horizontal, foot mounting and NEMA F-1 assembly.

Code Option Description Category List Adder

K10 F-1 Assembly 1 No Charge

K09 F-2 Assembly 1 No Charge For other mounting options, refer exact requirements to factory price and availability.

Balance – Precision Balance for Low Vibration All of our horizontal motors are designed to be within NEMA Standard vibration limits as a standard. NEMA Standards on vibration are defined in limits of unfiltered maximum velocity in inches per second (IPS) as measured on the bearing housing with motor on a rigid mounting. A precision balance with limits less than the NEMA limits is available per following chart.

Precision Balance Motor Speed

NEMA Standard Limits

Precision Balance Vibration Limits

2-Pole .15 IPS .10 IPS 4-Pole .15 IPS .10 IPS 6-Pole .15 IPS .08 IPS 8-Pole .12 IPS .07 IPS

10-Pole .09 IPS .06 IPS


R90 Precision Balance 1 $1,084

Balance - Special Two pole motors can be provided with special balance to obtain maximum vibration of 1 mil (.001 in.) peak-to-peak as measured on the shaft with shaft stick or 1.5 mils peak-to-peak with velocity probes, if furnished with motor.


R91 Special Balance - 500 & 580 Frames 2 $3,961

R91 Special Balance - All Other Frames 2 $6,315

Section 2




Bearings - Insulation


L27 Non Drive End (NDE) Bearing Insulated – 500 Frame, 2 Pole 1 $1,518

L18 Both Bearings Insulated except 500 & 580 Frames 2 $2,904

L18 Both Bearings Insulated – 500 Frames, 2 Pole 2 $3,623

L18 Both Bearings Insulated – 500 Frames, 4 Pole & slower 2 $1,813

L18 Both Bearings Insulated – 580 Frame, TEFC (CZ) Enclosure 2 $2,231

L18 Both Bearings Insulated – 580 Frame, All enclosures except TEFC 2 $2,332 NOTE1: Insulating both bearings is not available if motor is for belt drive application. NOTE2: NDE bearing insulated is standard for 500 Frame, 4 Pole and slower.

Bearings - Lubrication Systems As a standard, anti-friction bearing motors are grease lubricated and sleeve bearing motors are oil lubricated. Other lubrication options are available as follows:


R32 Oil Site Gauge 2 $1,331

R33 Constant Level Oilers; 1/Sleeve Bearing (Oil Rite) 2 $1,425

L66 Provisions Only for Flood Lubrication; Sleeve Bearings 1 $1,047

Bearings - Oil Sump Heaters For operation of sleeve bearing motors at ambient temperatures below 0°C, oil sump heaters in either 120V or 240V are required. Specify volts at time of order.


R36 Sump Heaters for Non-hazardous Areas (All Frames except 680 & 880 Frame) 2 $2,069

R36 Sump Heaters for Non-Hazardous Areas - 680 & 880 Frame)

2 $3,623

R36 Sump Heaters for Hazardous Areas (All Frames except 680 & 880 Frame)

3 $5,344

R36 Sump Heaters for Hazardous Areas - 680 & 880 Frame) 3 $6,378

Section 2




Bearing Protective Devices - Mechanical A. Vibration Switch - Intended for use with anti-friction bearing motors. The device is mounted on the motor

frame. List Adder is for mounting of one device.


R03 Robertshaw Model 365-A8 Vibraswitch 2 $2,592

R03 Robertshaw Model 365-A8 Vibraswitch - Hazardous areas 2 $5,699

R05 PMC / Beta 440 D-R 2 $4,011 B. Seismic Devices – A vibration transducer system for measurement of acceleration or velocity is available.

List Adder includes supply and mounting of one device at each bearing. List Adder for Provisions Only includes Siemens standard procedure includes a mounting block with a 2-1/2 inch diameter spot-face hole for device. Refer details of device to be used to factory for review prior to order acceptance.


R06 Acceleration Transducer System – Accelerometers; Bently-Nevada 2 $7,148

R07 Velocity Transducer System – Velometers; Bently-Nevada 2 $6,636

R08 Provisions Only for Vibration Transducers – Siemens Standard 1 $1,084 C. Velocity Vibration Probes - For use with sleeve bearing motors only. List Adder includes installation of

probes, proximeters, and cable wired to a common auxiliary terminal box.


A02 Two Radial Probes on Each Bearing; Bently-Nevada 3300 Series 8mm1 2 $24,182

R00 Installation of One Phase Monitoring Probe2 3 $7,411

A39 Provisions Only for up to 2 Radial Probes per Bearing 2 $6,287

R02 Provisions Only for 1 Phase Monitoring Probe2 3 $2,878 1Internally-mounted radial probes or provisions for them are standard for all motors except Type CZ – 580 frame and larger. When Type CZ – 580 frame and larger motors are supplied with vibration probes or provisions for vibration probes, the "BA" and "C" dimensions will increase. Consult factory or refer to the latest version of Dimension Prints for Above NEMA Motors ANSS-60000 for exact dimensions. If externally-mounted mounted probes or provisions for them are required on motors where internally-mounted is standard, refer requirements to factory for price and availability. 2Only available if purchased in conjunction with Code A02 – Two Radial Probes on Each Bearing.

Section 2




Bearing Protective Devices - Temperature Only one type of temperature device can be provided per bearing. A. Resistance Temperature Detectors Bearing RTD's are available per the following chart. Stick-type are available for either anti-friction bearing or sleeve bearings. Embedded-type are available for sleeve bearing only.


R79 (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs, 1/brg, stick-type 2 $2,174

A42 (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 1/brg, stick-type 1 $2,625

A42+A42 (4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 1/brg, stick-type 1 $5,250

R76 (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, single-element RTDs, 1/brg, Embedded per API – sleeve bearings only 2 $3,480

R09 (2) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 1/brg, Embedded per API – sleeve bearings only 2 $3,988

R09+R09 (4) 100 Ohm Platinum (0.00385 TCR) DIN Std, dual-element RTDs, 2/brg, Embedded per API – sleeve bearings only 2 $7,975

R18 (2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 1/brg, stick-type 2 $2,174

R20 (2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 1/brg, stick-type 2 $2,625

R19 (2) 10 Ohm Copper (0.00427 TCR), single-element RTDs, 1/brg, Embedded – sleeve bearings only 2 $3,480

R21 (2) 10 Ohm Copper (0.00427 TCR), dual-element RTDs, 1/brg, Embedded – sleeve bearings only 2 $3,988

R24 (2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 1/brg, stick-type 2 $2,174

R26 (2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 1/brg, stick-type 2 $2,625

R25 (2) 120 Ohm Nickel (0.00672 TCR), single-element RTDs, 1/brg, Embedded – sleeve bearings only 2 $3,480

R27 (2) 120 Ohm Nickel (0.00672 TCR), dual-element RTDs, 1/brg, Embedded – sleeve bearings only 2 $3,988

R13 Provisions only for bearing RTDs or thermocouples, 2/brg 1 $251

R22 Spring loaded fittings (for bearing RTDs or thermocouples stick type only) 1 $709

R17 Stainless steel shielding for bearing RTDs 2 $485

Section 2




Bearing Protective Devices – Temperature (continued) B. Thermocouples Bearing thermocouples are of the dual element type in a stainless steel sheath. List Adder includes supplying one thermocouple at each bearing. Stick-type are available for either anti-friction bearing or sleeve bearings. Embedded-type are available for sleeve bearing only.


R11 (2) Type EE chromel-constantan, dual-element thermocouples, 1/brg, stick-type 2 $1,338

R75 (2) Type EE chromel-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only 2 $1,505

R28 (2) Type JJ iron-constantan, dual-element thermocouples, 1/brg, stick-type 3 $1,672

R29 (2) Type JJ iron-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only 3 $1,881

R34 (2) Type KK chromel-alumel, dual-element thermocouples, 1/brg, stick-type 3 $1,672

R35 (2) Type KK chromel-alumel, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only 3 $1,881

R37 (2) Type TT copper-constantan, dual-element thermocouples, 1/brg, stick-type 3 $1,672

R38 (2) Type TT copper-constantan, dual-element thermocouples, 1/brg, Embedded – sleeve bearings only 3 $1,881

R13 Provisions only for bearing RTDs or thermocouples, 2/brg 1 $251

R22 Spring loaded fittings (for bearing RTDs or thermocouples stick type only) 1 $709

C. Thermometer – Dial-Type Standard dial type thermometers are available ifor sleeve bearing units only in all frames except 700, 788, and 880 Frames (Type CGZ). They are capillary-type and are available with or without contacts. Standard operating range is typically 0 C to 120 C. List Adder includes supplying one thermometer at each bearing.

Code Option Description Category List Adder A70 Dial-type bearing thermometers, capillary-type, without contacts 3 $5,904

A71 Dial-type bearing thermometers, capillary-type, with contacts 3 $7,011

R13 Provisions Only for One (1) per Bearing Temperature Device 1 $251 D. Temperature Relay Standard bearing temperature relays are either indicating type or non-indicating type. List Adder includes supplying one relay at each bearing.

Code Option Description Category List Adder R42 Non-indicating bearing temperature relays (Remote Display Only) 3 $6,642

R41 Indicating bearing temperature relays (Local Display Only) 3 $7,380

R13 Provisions Only for One (1) per Bearing Temperature Device 1 $251

Section 2




Bearings - Sleeve Basic List Prices may be modified with the appropriate adder to provide sleeve bearings where anti-friction bearings are standard.


K96 500 Frames; Open Enclosures 1 $5,169

K96 580 Frames; Open & TEAAC Enclosures 1 $6,988

K96 500 Frames; TEFC Enclosures 1 $8,573

K96 580 Frames; TEFC Enclosures 1 $10,398

K96 708 - 788 - 880 Frames; TEFC Enclosures 2 $24,185 Sleeve bearings are generally self-cooled, oil ring lubricated but some require external flood lubrication. See the following Lubrication Table for standard lubrication requirements based on a maximum 40 degrees C ambient and 60 hertz operation. Consult factory for ambient temperatures above 40 degrees C, other than 60 hertz operation, and/or for self-cooling of bearings where flood lubrication is standard. Those units requiring flood lubrication are supplied with provisions only. Refer oil supply pressure, type of oil, and location of provisions (F1 or F2 side) to factory for review prior to order acceptance.

Sleeve Bearing Lubrication Table

3600 RPM 1800RPM 1200 RPM and slower

Enclosure OPEN TEFC TEAAC OPEN TEFC TEAAC ALL 500 Frame S S - S S - S

588/5810 Frame S S F* S S S S 5812 Frame S F* F* S S S S 680 Frame S - F* S S - S 708 Frame - F* - - S - S 788 Frame - F* - - S - S 880 Frame - F* - - F* - S

OPEN refers to ODP, WPI, or WPII enclosure. S = Self lubricated F* = Flood lubrication required *NOTE: Self cooling of bearings may be possible on ratings where flood lubrication is required. Refer all details to factory for price and availability.

Section 2




Belt Drive Applications Motors to be used on belt drive applications have a larger shaft extension diameter and length than direct drive motors and have a roller bearing on the drive end. Motors with a ball bearing on the drive end should not be used on belt drive applications. Conversely, it is not recommended that motors with a roller bearing on the drive end be direct driven as excessive noise may occur. The chart indicates the minimum sheave diameters in inches recommended for belt drive motors in 500 and 580 frames. The adder can only be made to the ratings listed in the chart. For any drive applications falling outside of chart limitation, refer exact requirements to factory for price and availability. (List Adder does not include slide rails, see Soleplates/Slide Rails for appropriate addition.)


R92 Modification for Belt Drive Applications 1 $1,727

Minimum Motor Sheave Pitch Diameter

500 FRAME

ODP / WPI WPII TEFC HP 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 200 12.0 14.0 15.5 12.0 14.0 15.5 12.0 14.0 15.5 250 13.0 15.0 16.5 13.0 15.0 19.0 13.0 15.0 16.5 300 14.0 16.0 17.0 14.0 17.0 23.0 14.0 16.0 - 350 14.5 16.5 19.5 14.5 20.0 26.5 14.5 16.5 - 400 15.0 19.0 22.5 16.0 23.0 30.5 15.0 18.0 - 450 16.5 20.5 - 18.0 25.5 - 16.0 - - 500 18.5 23.0 - 20.0 28.5 - 17.0 - - 600 22.0 27.5 - 24.0 34.0 - - - - 700 24.5 - - 24.5 - - - - - 800 27.5 - - 28.0 - - - - - 900 31.0 - - 31.5 - - - - -

580 FRAME

ODP / WPI /WPII TEFC TEAAC HP 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 4 pole 6 pole 8 pole 200 - - - - - 15.5 - - - 250 - - - - - 16.5 - - - 300 - - 17.5 - 16.0 17.5 - - 17.5 350 - - 18.5 - 16.5 18.5 - - 18.5 400 - - 19.5 15.0 17.5 19.5 - - 19.5 450 - 18.0 20.0 16.0 18.0 20.0 - 18.0 20.0 500 16.5 19.0 20.5 16.5 19.0 - 16.5 19.0 20.5 600 17.5 20.0 - 17.5 20.0 - 17.5 20.0 - 700 18.5 - - 18.5 - - 18.5 - - 800 - - - 19.0 - - - - -

Section 2




Cancellation Charges A minimum charge of 10% of the order value will be assessed for any order cancellation. For any order less than $ 5,000 (e.g. a parts order), a minimum charge of $ 500 (five hundred U.S. dollars) will be assessed for any order cancellation. The following graph will apply to determine cancellation charges after the order is received and entered at the factory.

CANCELLATION CHARGES

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

% OF COMPLETION

% O

F S

EL

LIN

G P

RIC

E

A charge of 15% (fifteen percent) of the total motor price will be assessed if an order is canceled after it has been released for engineering and drafting whether or not the drawings have been completed and/or submitted for approval.

Chipper / Crusher Drives These special requirements often include higher than standard inertia and/or torque requirements. Refer such applications to factory for frame, pricing and availability.

Section 2




Couplings List Adder includes mounting only of shrink-fit, customer-supplied coupling which has been finish-bored and key-seated to our standard shaft dimensions. Couplings are to be sent freight prepaid to arrive at the factory at least six (6) weeks prior to scheduled shipment.


L17 Mounting of Customer-Supplied, Machined & Balanced 1/2 Coupling 2 $2,904 NOTE: Mounting of couplings to special shaft dimensions or hydraulic couplings require procedures that vary with individual couplings. Refer to factory for availability and pricing.

Current Transformers *NOTE: Refer to Terminal Box elsewhere in this section for pricing options.

Differential Pressure Switch Dwyer Instruments Model No. 1950-1 integral type, explosion-proof pressure switch can be furnished with filtered motors to measure pressure drops across the filter caused by clogging of particles in the filter.


S35 Differential Pressure SPDT Switch - Dwyer Model No. 1950 1 $1,678

S36 Differential Pressure Gauge 3 $1,364

Direction of Rotation Refer to Basic List Prices of rating. Those ratings indicated as “Uni-directional” in the “Rotation” column will require a direction of rotation (Option Code K97 or K98) to be specified at time of order placement.


K97 Clockwise Viewed from Motor Drive End 1 No Charge

K98 Counter-Clockwise Viewed from Motor Drive End 1 No Charge

K99 Bi-Directional Rotation 1 No Charge

Efficiency – Higher Than Standard For a special high efficiency design refer exact requirements to factory for price and availability.

Section 2




Export Packaging For motors to be export packaged per Siemens standard for overseas shipment…List Adder 6% to the total motor price. Please add 5 working days to the standard lead-time for export boxing. See Shipment Terms & Packaging for additional information.

Fan - External Cooling The chart below indicates standard cooling fan materials for TEFC (CZ & CGZ) and TEAAC (CAZ). Also indicated is price for alternate material.

Frame & Type Speed Standard Material

500 CZ (TEFC) 2-Pole Aluminum

580 CZ (TEFC) 2-Pole

Aluminum hub with non-metallic* blades

500 CZ & 580 CZ (TEFC)

4-Pole & slower Aluminum

708/788/880 CGZ** (TEFC)

2-Pole Aluminum hub with non-

metallic* blades

708/788/880 CGZ** (TEFC)

4-Pole & slower Aluminum

All CAZ (TEAAC) All Aluminum


S50 Anodized Aluminum Fan for 500 & 580 Frame, TEFC Only 2 $1,211

S51 Bronze Fan for 500 & 580 Frame, TEFC Only 2 $2,758

S85 Steel Fan, Uni-Directional for All CAZ (TEAAC) 2 $1,279 *Non-metallic blades may be polypropylene, polyamide, or vestamide. Consult factory for exact material. **Refer to the factory for additional materials for 708/788/880 TEFC frames. Note: All 2-pole motor fans and all Type CAZ motor fans are uni-directional. Also, 4-pole 788 & 880 CGZ fans are uni-directional. All other fans are bi-directional.

Fan Housing Standard fan housing on TEFC 500 & 580 frame motors is cast-iron. All other frame sizes have steel fan housings.

Section 2




Filters All WPII motors have standard provisions for addition of filters. Various types of filters can be supplied as optional equipment on WPII motors. For filters on ODP or WPI enclosures, consult factory. The standard filters below have an option Category 1.

Filters Code Filter Material Category List Adder

500 Frame 580 Frame 680 Frame S30 Galvanized Steel 1 $851 $912 $1,208 S31 Aluminum 1 $792 $1,047 $1,728 S32 Stainless Steel 1 $1,599 $2,027 $2,889

NOTE: Other filter media is available. Refer exact requirements to factory for price and availability.

Flanges The MRPD designation for D-flange mounting is indicated in the motor’s basic MRPD structure. Refer to the Section 1, Part MRPD for more details.

A D-flange is available for 500 and 580 frames in a ball bearing, single shaft, and direct connected application only. The D-flanged motor requires foot-mounted support. The D-flange is available for all enclosures in Basic List Prices. D-Flange is available per NEMA Standards or as Custom. The Custom D-Flange would require receipt and review of customer-supplied drawing by factory prior to order acceptance.

D-Flange per NEMA Standard Code Category Frame List Adder R60 2 500 $3,184 R60 2 580 $5,140

Custom D-Flange

R59 2 500 $3,184 R59 2 580 $5,140

Freight As a standard motors are sold FCA-Loaded factory, freight collect with domestic packing only.

Frequency - 50 Hertz For 50 hertz ratings not found in the Basic List Price section, increase required HP by a factor of 1.2 and round up to the nearest comparable 60 hertz rating. (Example: To find 400HP - 50 hertz rating, multiply 400HP x 1.2 = 480HP. Use comparable 500HP - 60 hertz rating). See Voltage in this section for proper Basic List Price selection.

Section 2




Ground Pads Copper ground pads on motor frames.


R54 Copper Ground Pads on Frames 1 $301

Hardware Standard external hardware is 300 series stainless steel for all enclosures. For specific hardware requirements, such as #316 stainless steel, refer to factory for pricing and availability. Also available is 316 stainless steel for all enclosure bolts, studs, and other fastening devices up through 0.5-inch (M12) size.


R46 Stainless Steel #316 Hardware 3 $3,690

Hazardous Location The MRPD designation for Division 2 areas is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details.

Division 2 - For Class I, Groups B, C, and/or D use appropriate list price and frame for the customer-specified

enclosure for 1.0 service factor. The motor will meet NEC Article 500 definition for motors permitted in the Class I, Group(s), Division 2 area(s). NEC requirements and restrictions must be observed. Certification of the motor for use in the Division 2 area is not normally provided.


D40 CSA Label for Class 1, Group D, Division 2 Only 1 $201 For 1.15 service factor see Service Factor elsewhere in this section for proper sizing. NOTE: The applicable Class(es) and Group(s) must be specified in the quotation and at time of order. For other classes and groups, refer exact requirements to factory for price and availability. Division 1 motors are not offered for adjustable speed drive applications. Division 2 motors intended for adjustable speed drive application should be referred to factory.

IEEE 841 Std-2009 (Order Code R61 / Category 2)

See Base List Prices, Frame, and Features Section 5B for price, availability, and comments on motors per IEEE841-2009 specification..

Inrush Current - Lower than Standard Typical standard inrush currents are shown in the performance data section. Inrush currents lower than standard are available. This will affect other performance characteristics such as locked rotor torque or breakdown torque. Refer exact requirements to factory for price and availability.

Section 2




Insulation Motors are supplied with a class F insulation system as standard.

Load Inertia The table below lists load inertia values which our standard, polyphase motors can accelerate without injurious temperature rise under the following conditions: 1. Rated voltage and frequency applied at the motor terminals. 2. During accelerating period, connected load torque shall be equal to, or less than, a torque which varies as

square of the speed and is equal to 100% of full-load torque at rated speed. 3. Two successive starts with motor at ambient temperature, or one start with motor not exceeding rated

temperature. Subsequently, the number of permissible starts will depend upon the time required to accelerate the load from stand still to full speed, the thermal capacity of the motor, and the time required for the motor temperature to return to rated temperature after each such start.

Driven equipment requiring higher than standard load inertia may require a larger frame size and/or special rotor designs. Refer exact requirements to factory for price and availability.

Standard Load Inertia (lb.-ft.2) Exclusive of Motor Inertia HP RPM

3600 3000 1800 1500 1200 1000 900 720 200 86 135 831 1304 2238 3496 4508 7750 250 105 165 1017 1590 2744 4282 5540 9530 300 123 193 1197 1874 3239 5060 6540 11270 350 141 221 1373 2152 3723 5820 7530 12980 400 158 249 1546 2425 4199 6570 8500 14670 450 175 275 1714 2692 4666 7300 9460 16320 500 191 301 1880 2955 5130 8030 10400 17970 600 222 352 2202 3467 6030 9450 12250 21190 700 252 400 2514 3964 6900 10840 14060 24340 800 280 446 2815 4447 7760 12200 15830 27440 900 308 491 3108 4918 8590 13520 17560 30480

1000 334 534 3393 5380 9410 14820 19260 33470 1250 395 4073 11380 23390 40740 1500 451 4712 13260 27350 47750 1750 502 5310 15060 31170 2000 548 5880 16780 34860 2250 590 6420 18440 2500 628 6930 20030 3000 694 7860 3500 746 8700 4000 785 9460 4500 813 10120 5000 831 10720

Section 2




Noise Requirements Typical no load, free field noise levels of standard design motors are shown below. For guaranteed levels, add 2 dba to the levels below those shown in the following chart;

Typical Overall Level 'A' Scale (dbA at 1 Meter)

Enclosure Frame 3600 RPM 1800 RPM 1200 RPM 900 RPM & Slower 508 91 84 85 85

5010 89 84 85 82 588 81 83 85 83

5810 80 83 85 82 5812 83 83 85 83 6811 84 81 85 85

ODP/ WPI

6813 86 83 85 85

508 81 80 82 82 5010 80 81 82 82 588 80 82 85 83

5810 81 80 82 81 5812 82 81 85 82 6811 83 80 86 82

WPII

6813 83 82 82 82

509 86 84 80 80 5011 85 85 80 80 5013 88 88 80 80 588 87 86 80 80

5810 87 86 80 80 5812 87 86 80 80 708 85 82 81 80 788 84 84 86 80

TEFC

880 85 89 85 81

588 87 82 82 82 5810 90 82 82 82 5812 90 81 82 82 6811 89 84 82 82

TEAAC

6813 87 84 82 82

NOTE: Lower noise levels may be available. Lower noise level designs may affect motor dimensions. Refer requirements to factory for details, price and availability.

Section 2




Paint Systems Norwood’s Standard Duty Paint System is a two-part epoxy system in Motor Blue. Refer to the adder below for Siemens Harsh Duty Paint System and Extreme Duty Paint System.

Code Option Description Additional Working

Days* List Adder

S03 Harsh Duty Painting System, Standard Color 5 $3,894

S07 Extreme Duty Painting System, Standard Color – (All except WPII Enclosure in Frames 5810, 5812, 6811 & 6813)

12 $16,974

S07 Extreme Duty Painting System, Standard Color – WPII Enclosure, Frame 5810

12 $21,992


12 $21,026


12 $17,992


12 $20,979

S13 Standard Duty Painting System with Black Color RAL9005 0 $1,453

Y53 Other Colors (Requires Additional Clarification - Munsell or RAL #) 5 $1,453

*If purchased, these Additional Working Days must be added to any published motor Lead Times.

Rotor Construction / Corrosion Protection

The MRPD designation for Copper-bar Rotors is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details.

See Basic List Prices section for standard rotor construction of rating. When a fabricated copper bar rotor is required by specification, use the following List Adder on the rating where a die cast aluminum rotor construction is shown as standard.

Copper Bar Rotor – Category 2 Code Category Frame List Adder R68 2 508 - 5013 $15,673 R68 2 588 - 5810 $18,806 R68 2 5812 $20,898


S02 Corrosion Protection for the Rotor 1 $1,616

Section 2




Service Factor For 1.15 service factor to accommodate overload conditions above rated horsepower, make the following list price additions to the basic motor price*. Option Description Category

1.15 SF / Class F Temperature Rise 1 Use Same HP Rating

1.15 SF / Class B Temperature Rise 2 Next Larger HP** *For non-hazardous locations only. For Division 2 locations, size motor by increasing required HP by 1.15 and round up to nearest HP. **Size motor by increasing required HP by 1.15 and round up to nearest HP.

Shaft Extension Standard shaft extension is a short shaft for direct connection. If specified at time of order, 4-pole and slower ball bearing motors can be supplied with a long shaft for direct connection at no charge. The long shaft is standard for belt drive application (See Belt Drive Applications elsewhere in this section). For special shaft extension, tapered or threaded shafts, double shaft extensions on TEFC or TEAAC motors, stub shafts on two-pole compressor motors, shafts longer than 20", special shaft material or other variations, refer exact requirements to factory for price and availability. Customer must furnish taper gages.

Shaft Seal (Code R87,R88 / Category 2) A shaft seal is sometimes referred to as a shaft slinger or shaft flinger. All anti-friction bearing motors are supplied with a rubber, V-ring, external shaft seal as standard on all enclosures. For alternate rotating shaft seal* on drive end of any enclosure, see chart below.

Rotating Shaft Seal – Category 2 Frame Drive End List Adder Both Ends List Adder

500 Code R87 $1,087 Code R88 $2,178 580 Code R87 $1,603 Code R88 $3,207 708 Code R87 $1,862 Code R88 $3,720

680-788 Code R87 $2,073 Code R88 $4,153 880 Code R87 $2,280 Code R88 $4,561

*When motors are supplied with rotating shaft seal(s), the "BA" and "C" dimensions may increase. Consult factory for exact dimension. All sleeve bearing motors are supplied with aluminum, labyrinth-type shaft seals. Alternate materials are available, refer exact requirements to factory for price and availability.

Section 2




Shipment Terms & Packaging Standard shipment terms are FCA Loaded, Norwood, OH factory, freight collect with our standard domestic packaging only. Contact factory for other Incoterms.

Software Packages Software will be in our standard format and submitted electronically in the medium indicated unless expressly negotiated and entered as a separate line item on the purchase order. Our standard software package includes the following in *.pdf format;

a) motor outline drawing b) the calculated motor electrical performance data including speed vs. torque, speed vs. current, and

thermal limit curves c) motor instruction manual d) Our standard commercial test report

Additional software options; Shaft details data for purposes of torsional analysis...List Adder $519 (Option Code = U68). Seismic analysis per item per location...List Adder $6,050 (Option Code = U66). Supplying software with additional information, in customer-specified formats, and/or in alternative electronic formats may be accommodated. Refer to Norwood Product Lead Times ANCM-70000-xxxx for software and documentation lead times and offerings.

Soleplates / Slide Rails / Shims


R93 Norwood Standard 2-piece Soleplates (500 & 580 Frames) 2 $7,557

R93 Norwood Standard 2-piece Soleplates (680-708-788-880 Frames) 2 $9,076

R94 Soleplates with prov. for horizontal jackscrews (500 & 580 Frames) 3 $13,284

R94 Soleplates with prov. for horizontal jackscrews (All Other Frames) 3 $22,139

R95 Slide Rails for 500 & 580 Frames 2 $4,352

R98 Stainless Steel Shims (Siemens Standard, 500 & 580 Frames) 1 $1,766

R98 Stainless Steel Shims (Siemens Standard, 680-708-788-880 Frames) 1 $2,645

R96 Vertical Jacking Screws 1 $201 For special custom made adapter bases to match motor to existing equipment, refer exact details to factory for availability and pricing.

http://seaport.sea.siemens.com/pcd/marketing/accy_info/paint/Standard%20Duty%20Paint%20System.pdf

http://seaport.sea.siemens.com/pcd/marketing/accy_info/paint/Harsh%20Duty%20Paint%20System.pdf

Section 2




Space Heaters 120/240 Volt, single phase space heaters with max. sheath temperature of 200 oC are standard on all WPII motors and are available as optional equipment on other enclosures. Heaters include leads wired to an auxiliary box mounted on the motor. Other voltages are available and exact requirements should be referred to factory for price and availability.


R40 120/240 Volt, Single-Phase - Low Temp. (200 oC) 1 $1,184

Starting - Reduced Voltage/Soft Start Standard motors are designed for starting at 100% of nameplate voltage. Motors can accelerate normal loads at reduced voltage starting provided the voltage does not dip below 90% of rated voltage at the motor terminals. For soft start or starting on voltages at less than 90% of rated voltage, special electrical designs may be required. Refer complete details of load to be accelerated (driven equipment speed vs. torque curve and load inertia), available voltages, and any other requirements to factory for price and availability.

Startup Assistance Field Engineering Services are not included in any of the prices of this pricing guide. We do offer complete installation, field engineering assistance, startup, and repair services. If any of the services are required or for more details on these services, please contact the Siemens Technical Support Communication Center at 1-800-333-7421.

Stator - Connections For wye-delta connections*, three leads are provided as standard on single voltage motors, six leads are provided as standard on dual voltage motors.


S10 Wye-Delta Connection* - for Low Voltage Motors Only 2 $2,267

S11 Heavy-Duty Bracing (500 & 580 Frames) 2 $903

S11 Heavy-Duty Bracing (680-708-788-880 Frames) 2 $1,208

S16 Longer Than Standard Leads - Up to a Maximum 60 Inches 2 $748

Section 2




Stator - Insulation/Treatments Generally, most low voltage motors have random wound coils with a polyester varnish type insulation. All motors 2300 volt and above have form wound stator coils with Siemens’ standard VPI insulation system. For form wound 460 volt system, use list price and frame of comparable 2300 volt rating. Performance data may vary slightly from published data. All insulation systems are class F, non-hygroscopic and are supplied with EPDM rubber lead cable. Because of some environmental conditions, additional stator treatments are available. An anti-fungus treatment (tropicalization) is for humid areas and an anti-abrasion treatment is for areas that may contain abrasive particles that may circulate inside a motor. Anti-abrasion treatment is for ODP, WPI, or WPII enclosures only.


S00 Anti-fungus protection for the stator – 500 Frames 1 $324

S00 Anti-fungus protection for the stator – All other Frames 1 $538

S01 Anti-abrasion treatment for the stator – 500/580 Frames 1 $1,565

S01 Anti-abrasion treatment for the stator – 680/708/788 Frames 1 $1,742

S01 Anti-abrasion treatment for the stator – 880 Frames 1 $2,093

Stator - Protective Devices A. Resistance Temperature Detectors - Standard RTD options include a set of six, 3-wire RTD's with Teflon

insulated, #22-gauge leads which meet IPTS-68 Standard.


R65 (6) 100 Ohm Platinum RTDs; 2/phase 1 $1,181

R17 304 Stainless Steel Shielding for Stator RTDs 2 $485

B. Thermistors - Standard thermistor option includes three Texas Instrument positive temperature coefficient (PTC) type sensors to be used with a Texas Instruments control module. Standard control module is manual reset type with trip indicator, 120 Volt single channel input. Modules with alarm channel are available at additional premium. Standard switch temperatures are 135 C, 155 C or 180 C.


A16 Thermistors - (6) PTC – 2/phase 1 $1,294

R14 PTC control module 1 $625

C. Thermostats - Texas Instruments (Klixon*) thermostats can be furnished with either normally-open or normally-closed contacts wired to main terminal box.


R15 Thermostat - (3) TI Klixon; normally open contacts 2 $435

R16 Thermostat - (3) TI Klixon; normally closed contacts 1 $435

Section 2




Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators Auxiliary Boxes Our standard, cast-iron auxiliary boxes meet NEMA 4X requirements and is segregated to house space heater and temperature instrumentation leads if those devices are purchased. Stainless steel is an option.


M51 Auxiliary Box - Stainless Steel 2 $2,008

M52 Separate Box for Temperature Instrumentation (separate from space heater box)

2 $722

Main Terminal Box A – Main Terminal Box Size The standard main terminal box is selected on the basis of full load current of the motor and exceeds NEMA volume requirements (see table below). The standard main terminal box location is NEMA F-1 unless specified otherwise at time of order (See Assembly elsewhere in this section).

HP 460 V or 575 V <= 2300 V <= 4160 V <= 6600 V Up to 700 CI2 CI2 CI2 CI3 701 - 1000 CI3 CI2 CI2 CI3 1001 - 1750 - CI2 CI3 CI3 1751 - 3000 - CI2 CI3 FS3 3001 - 5000 - CI3 FS1.5 FS3 5001 - 7000 - - FS2 FS3

Basic List Price of motor includes main terminal box per following chart. For larger main box, if standard box is CI2 use the following List Adder otherwise use the List Adder difference between the standard box and the desired box size. For main terminal boxes on voltage over 6600V or for larger boxes than those listed below, please refer to the factory for price and availability.

Code Box Option Description Category List Adder

U80 CI3 Cast-Iron – NEMA Type I (6370 cu. In. volume) 1 $1,783

U81 FS1.5 Fabricated Steel – NEMA Type I (13900 cu. In. volume) 2 $2,419

U82 FS2 Fabricated Steel – NEMA Type II (21750 cu. In. volume) 2 $2,588

U84 FS3 Fabricated Steel – NEMA Type II (57276 cu. In. volume) 2 $3,969 NOTE: Boxes CI2, CI3, and FS1.5 are mounted on the motor and are rotatable in 90-degree increments. Boxes FS2 and FS3 boxes will be free-standing with feet and will require customer to supply support from beneath.

Section 2




Use the following table to determine minimum main terminal box size for additional features and add for the additional features as listed below.

Additional Features Minimum Box Required (1) Ammeter CT FS1.5 (a),(b)

(3) Current Transformers FS2 (a) Surge Protection FS3 (c)

Standoff Insulators FS1.5 (b)

(a) Ametering current transformer and (3) current transformers together requires FS3 box. (b) Ametering current transformer and standoff insulators together require minimum FS2 box. (c) FS3 terminal box will accommodate any combination of the Additional Features listed above.

B – Current Transformers / Differential Protection List Price does not include main terminal box. Add for the appropriate main terminal box under “Main Terminal Box”.


U96 (1) Ammeter CT (either Main or Neutral Lead - clarification text required) 2 $1,256

U90 (3) CT's for Differential Protection, 50:5, mounting in main box 2 $3,773 C – Surge Protection and Accessories Our standard surge protection consists of three lightning arrestors and one surge capacitor mounted in a fabricated terminal box. Price of these varies with motor voltage. See charts below for List Adders:


U92 Surge Capacitor and Lightning Arrestors (up to 4160 V)** 2 $14,510

U93 Surge Capacitor and Lightning Arrestors (up to 6900 V)** 3 $19,925

U97 120/240 V Space Heater for Main Termain Box 2 $1,422 **NOTE: Surge protection is not available for motors intended for use with an adjustable frequency drive application. D – Standoff Insulators Standoff insulators are standard feature of FS2 or FS3 terminal boxes. For FS1 terminal box, add per List Adder below.


U89 Standoff Insulators 2 $2,930

Section 2




Tests Each motor is given tests as may be deemed essential by Siemens. The following is a List Adder table and descriptions of additional test options. An unwitnessed routine test is included at no charge with all motors ordered. When test reports are required, they must be specified at the time the motor is ordered. The test reports will be per NEMA MG1-20. Where applicable, standard value of stray load losses to be used will be per Siemens Product Engineering Standard or IEEE112 unless specified otherwise.

Please refer to the Order Codes listed below List Adder Unwitnessed Tests* 250-500 HP 501-1500 HP 1501-2500 HP 2501-5000 HP Routine Test No Charge No Charge No Charge No Charge U04 Complete Test $11,222 $12,852 $15,907 $19,215 U34 Complete Test per API 547 $15,499 $18,340 $21,807 $26,204 F54 Polarization Index Test $1,312 $1,312 $1,312 $1,312 U28 Bearing Temperature Test $3,743 $4,896 $5,880 $6,950 U16 Sound Test (Walk-around) $3,066 $3,066 $3,066 $3,066 Witnessed Tests* 250-500 HP 501-1500 HP 1501-2500 HP 2500-5000 HP

U01 Routine Test $4,084 $6,415 $8,009 $9,875 U21 Routine Test per API 547 $11,235 $12,358 $13,482 $14,606 U05 Complete Test $18,326 $21,021 $26,035 $31,444 U35 Complete Test per API 547 $20,908 $25,418 $31,677 $38,113 U29 Bearing Temperature Test $6,144 $7,939 $9,616 $11,359 U17 Sound Test (Walk-around) $6,356 $6,356 $6,356 $6,356

Sealed Winding Conformance Test

(Spray Test per NEMA MG1) Frame Code = U46 Unwitnessed* Code = U47 Witnessed*

500-580 $6,308 $10,320 680-708-788 $6,934 $11,358

880 $7,576 $12,380

*NOTE: Add five (5) working days to lead-time for each Unwitnessed Test or ten (10) working days for each Witnessed Test.

Section 2




Routine Test Each motor is given a routine test in accordance with ANSI C50.41, NEMA MG1-12 and/or MG1-20 to assure that it is free from electrical and mechanical defects. Included in the test are; Measurement of resistance of winding. Measurement of no load, current, power, and speed at rated voltage and frequency. Insulation resistance. High potential test per NEMA MG1-20. Mechanical balance and vibration per NEMA MG1-7.

Complete Test Complete test per NEMA MG1-20 and test analysis includes; Routine test. Determination of efficiency at full, 3/4, and 1/2 loads. Determination of power factor at full, 3/4, and 1/2 loads. Temperature run by either dual frequency method or by direct load. Locked rotor current curve. This is done at reduced voltage to prevent thermal damage to motor. Determination of locked rotor and breakdown torques.

Sound Pressure Test Test procedure in accordance with IEEE 85 and NEMA MG1-20.

Bearing Temperature Test To determine the stabilized bearing temperature at no load. If a minimum test duration time is required, specify on order.

Speed-Torque and Speed-Current Curves Test To provide curves of torque versus speed and input current versus speed at specified input voltages.

Polarization Index Test Polarization in accordance with IEEE 45.

Efficiency Test – Segregated Loss Method (E1) This test is an efficiency test and analysis in full accord with IEEE 112, Method E1.

Efficiency Test – Equivalent Circuit Method (F1) This test is an efficiency test and analysis in full accord with IEEE 112, Method F1.

Sealed Winding Conformance Test To test the sealed windings in accordance with NEMA MG1-20.18.2 – Test For Which Stator Cannot Be Submerged.

Section 2




Torques - Non-Standard Starting or breakdown torques higher than standard usually require special rotor construction. If die cast rotors are standard, copper bar rotors may be required. Even where copper bar rotors are standard, special rotor bar material or rotor construction may be necessary. Refer to factory for pricing, frame, and availability.

Voltages

The MRPD designation for Voltages is indicated in the motor’s basic MRPD structure. Refer to Section 1, Part MRPD for more details.

For sizing and pricing of most common voltages use the following chart;

Voltage For Use 60HZ 50HZ*

380 – 600 440, 480, 575, 600 380, 415 460 601 – 2400 950, 1000, 2300, 2400 - 2300 2401 – 4160 4000, 4160 3000, 3300 4000 4161-4800 4800 - Refer To Factory

4801 – 6900 6600, 6900 5500, 6000, 6600, 6900 6600 6901 – 13,800 Refer To Factory

*See Frequency elsewhere in this section for proper motor sizing.

Warranty Offerings

Standard Warranty See Siemens Industry, Inc. – Standard Terms and Conditions of Product Sales. The entire text can be found on our website at:

http://www.sea.siemens.com/us/AboutUs/Pages/Terms-and-Conditions.aspx Optional Warranties For Deferred or Extended Operational Warranties refer detailed requirements to factory for pricing and availability.

ANSP-60000-0211 Rev.0 ©2011 Siemens Industry, Inc. All Rights Reserved. Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice.

Siemens Industry, Inc. Drive Technologies Division – Large AC Above NEMA Motors 4620 Forest Avenue Norwood, OH 45212-3396 Phone: 513-841-3100 Fax: 513-841-3101

Siemens Pricing Guide for Horizontal Above NEMA Motors ... · PDF filePricing Guide for Horizontal Above NEMA Motors ANSP-60000-0211 ... Pricing Guide for Horizontal Above NEMA Motors

Documents