The following are Suggested Gaps (Clearances) when using our Wipes and Seals with any Frameless Shower Door Hardware. These Suggested Gaps (Clearances) are GUIDELINES ONLY. Suitable for glass thickness from 6mm to 12mm in translucent /Clear finish & Easy push fit - No gluing or silicone needed. All shower seals are 2.49m Long, cutting the seals is a simple task using a stanley knife or hacksaw. For curved screens, soaking the shower seal in hot water for 10-15 minutes before fitting will provide flexibility - Soapy water will assist in installation. Top View Fixed Panel Glass Door Open Top View Fixed Panel Glass Door Open P1801P P180SDJ and P120SDJ P180SDJ and P120SDJ CAT. NO. GLASS SIZE SUGGESTED GAP P1801P P180SDJ P120SDJ 3/8" (10 mm) 3/8" (10 mm) 1/2" (12 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 98" (2.49 M) STOCK LENGTHS This Clear 180º Polycarbonate is snapped onto the fixed panel running inline with the door. P180SDJ and P120SDJ contain vinyl insert V600CSG. P1801P is all one piece. 'Y' INLINE P ANEL SEAL FOR 180 º 'Y' Inline Panel Seal is for use on 180º inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side. 'U' portion PVC is rigid with single leg made of soft vinyl. POLYCARBONATE 'H' JAMB FOR 180 º This Clear Polycarbonate 'H' Jamb is for use on 180º inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. POLYCARBONATE 'U' WITH BULB ATTACHMENT Top View Fixed Panel Glass Door Open The Clear Polycarbonate 'U' With Bulb Attachment is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft Bulb portion of the Seal allows doors to swing both in and out of the enclosure if desired. CAT. NO. GLASS SIZE SUGGESTED GAP PCR10 3/8" (10 mm) 1/4" (6 mm) 98" (2.49 M) STOCK LENGTHS CAT. NO. GLASS SIZE SUGGESTED GAP P140HJ P516HJ P380HJ P120HJ 1/4" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 98" (2.49 M) STOCK LENGTHS Top View Fixed Panel Open Glass Door CAT. NO. GLASS SIZE SUGGESTED GAP PCC8 PCC10 PCC12 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 3/16" (4.7 mm) 98" (2.49 M) STOCK LENGTHS POLYCARBONATE STRIKE AND DOOR JAMB FOR 180 º SHOWER-SEALS.CO.UK Brought to you by -
High Quality Glass Fittings & Accessories for Shower Enclosures & Wetrooms. Create your perfect bathroom with our extensive range of Shower Hardware and accessories. Glass fittings, Shower Seals, Glazing U-Channel, Shower Hinges, Door Knobs, Glass Clamps, Shower Support Bars, Shower Door Kits, Demista Heated Mirror Pads, Stand Offs, Shower Brackets, Sliding Door Kits, Shelf Support Brackets, 6k Hydrophobic Protection & Maintenance Products
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The following are Suggested Gaps (Clearances) when using our Wipes and Seals with any FramelessShower Door Hardware. These Suggested Gaps (Clearances) are GUIDELINES ONLY.
Suitable for glass thickness from 6mm to 12mm in translucent /Clear finish & Easy push fit - No gluing or siliconeneeded. All shower seals are 2.49m Long, cutting the seals is a simple task using a stanley knife or hacksaw.For curved screens, soaking the shower seal in hot water for 10-15 minutes before fitting will provide flexibility -
Soapy water will assist in installation.
Top View
Fixed Panel Glass Door
Open
Top View
Fixed Panel Glass DoorOpen
P1801PP180SDJ and P120SDJ
P180SDJ and P120SDJ
CAT. NO. GLASS SIZE SUGGESTED GAP
P1801PP180SDJP120SDJ
3/8" (10 mm)3/8" (10 mm)1/2" (12 mm)
3/16" (4.7 mm)3/16" (4.7 mm)3/16" (4.7 mm)
98" (2.49 M) STOCK LENGTHS
This Clear 180º Polycarbonate is snapped onto the fixed panel running inline with the door. P180SDJ and P120SDJ contain vinyl insert V600CSG. P1801P is all one piece.
'Y' INLINE PANEL SEAL FOR 180º 'Y' Inline Panel Seal is for use on 180º inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side.'U' portion PVC is rigid with single leg made of soft vinyl.
POLYCARBONATE 'H' JAMB FOR 180º This Clear Polycarbonate 'H' Jamb is for use on 180º inline glass-to-glass applications. Snap onto the fixed panel with the lip onthe strike side, or onto the door with the lip on the hinge side.
POLYCARBONATE 'U' WITH BULB ATTACHMENTTop View
Fixed Panel Glass Door
Open
The Clear Polycarbonate 'U' With Bulb Attachment is a versatileseal that can be mounted to the edge of a door or panel for avariety of installation configurations. The soft Bulb portion of the Sealallows doors to swing both in and out of the enclosure if desired.
POLYCARBONATE DOOR JAMB FOR 135ºThis Clear Polycarbonate is snapped onto the door on
the hinge side to achieve a seal to the fixed panel in 135°neo-angle installations. Contains our V600CSG vinyl insert.
POLYCARBONATE 'U' WITH LEG AND SEAL FOR 90º
This Clear Polycarbonate is snapped onto the strike sidefixed panel at a 90˚ angle from the door. Contains vinyl insert.
POLYCARBONATE 'U' WITH 90º VINYL FIN SEALMultiple uses include applying to the sliding door
or fixed panel of a Hydroslide Sliding Door System, or as a 90ºseal for a fixed panel meeting a door at 90º.
MULTI-PURPOSE POLYCARBONATE STRIKE ANGLE JAMB
This Clear Polycarbonate Angle Jamb isused for both hinge and strike jambs. It can beadhered to the wall or a fixed panel using ourClear Very Hi-Bond Tape.
CAT. NO. GLASS SIZE SUGGESTED GAP
P12LJ 1/4" to 1/2" (6 to 12 mm) 3/16” (4.7 mm)
98" (2.49 M) STOCK LENGTHS
'Y' INLINE PANEL SEAL WITH VINYL FOR 180º'Y' Inline Panel Seal is for use on 180º inline glass-to-glass
applications. Snap onto the fixed panel with the lip on the strike side.Soft vinyl helps cushion door closure.
• Adheres Using Silicone Only (Not Very Hi-Bond Tape)TRANSLUCENT SILICONE BULB SEALTranslucent Silicone Bulb Seal can be used on inswing
or outswing doors to close gaps from 1/16" (1.6 mm) to3/16" (4.7 mm). Adhere flat base to glass edge or wall usingonly our Clear Silicone. Minimum order is five lengths.
CAT. NO. MAXIMUM GAP USING SDT980-THRESHOLD ALSO
S1LB 3/16" (4.7 mm) 7/16" (11 mm)
98" (2.49 M) STOCK LENGTHS
Clear Silicone
Bulb Seal Mounted to Glass
Hinge Pivot PointClear Sili-
cone
Open
Glass or WallStrike Side
Glass or WallHinge Side
Top View
5/16"(8 mm)
• Very Soft Twin Legs Seal While Providing Quieter Door Closure
• Now Available for 1/2" (12 mm) Glass
Top View
Fixed Panel
Front LegTrimmed Off
Glass Door
Soft Rigid
Open
Side View
Curb
Rigid
Soft
GlassDoor
SDTJ or SDTB
SDLBBulb Seal Mounted to Wall
Hinge Pivot Point
Clear Very Hi-Bond Tape
Clear Very Hi-BondTape
Open
Glass or WallStrike Side
Glass or Wall Hinge Side
Top Views
Bulb Seal Mounted to Glass
Hinge Pivot Point
Clear Very Hi-Bond Tape
Clear Very Hi-BondTape
Open
Glass or WallStrike Side
Glass or Wall Hinge Side
1/4"(6 mm)
5/32" or 7/32"(3.9 or 5.6 mm)
SDTJ or SDTB
SDLB
3/8"(10 mm)
3/8"(10 mm)
• A Best Seller
• Available in Three Sizes
TRANSLUCENT VINYL "DOUBLE FIN" SEALTranslucent "Double Fin" Seal can be used for inswing or
outswing doors. The two different size fins allow the installer achoice of seal lengths. Use as is, or simply trim the legs asnecessary. Adhere 5/16" (8 mm) rigid base to glass edge or wallusing our Clear Very Hi-Bond Tape. Minimum order is five lengths.
CLEAR POLYCARBONATES, VINYL SEALS, AND EDGE WIPES
Translucent Vinyl Bulb Seal can be used on inswing oroutswing doors. Cat. No. SDTB closes gaps from 5/32" (4 mm) to7/32" (5.6 mm). Cat. No. SDTJ closes gaps from 1/8" (3 mm) to 5/32" (4 mm). Cat. No. SDLB closes gaps from 3/16" (5 mm) to3/8" (10 mm). Adhere rigid flat base to glass edge or wall usingour Clear Very Hi-Bond Tape. Minimum order is five lengths.
MULTI-PURPOSE 'H' WIPEVersatile Multi-Purpose 'H' Wipe has two rigid legs and two soft
legs. It can be used as a bottom sweep, or as a seal if run vertically up the edge of the door. One or both soft can betrimmed to accommodate many installation options.
MULTI-PURPOSE 'H' WIPE WITH "EXTRA SOFT" TWIN LEGSOur NEW Multi-Purpose 'H' Wipe With "Extra Soft" Twin
Legs acts as a versatile seal that can be used either on theside or bottom of a door. Because of the very soft duallegs, quieter door closure can be expected, as opposed toclosing into harder plastic seals. It is also easy to trim thevery soft legs to accommodate your particular application.
Top View
Fixed Panel
Front LegTrimmed Off
Glass Door
Soft Rigid
Open
Side View
Curb
Rigid
Soft
GlassDoor
CAT. NO. GLASS SIZE *SUGGESTED GAP *USING SDT980-THRESHOLD ALSO
P375HWS 3/8" (10 mm) 5/16" (8 mm) 9/16" (14 mm)
*Sugguested gap shown is when used on bottom of door.
98" (2.49 M) STOCK LENGTHS
CAT. NO. GLASS SIZE *SUGGESTED GAP *USING SDT980-THRESHOLD ALSO
*Sugguested gap shown is when used on bottom of door.
98" (2.49 M) STOCK LENGTHS
98" (2.49 M) STOCK LENGTHS
WITHOUT PRE-APPLIED TAPECAT. NO.
WITH PRE-APPLIED TAPECAT. NO.
MAXIMUM GAP
SDTJSDTBSDLB
SDTJT2SDTBT2-
5/32" (4 mm)7/32" (5.6 mm)3/8" (10 mm)
Side View
GlassDoor
Clear VeryHi-BondTape
Curb
Glass DoorGlassor Wall
Clear Very Hi-Bond Tape
19/64"(7.5 mm) 15/64"
(6 mm)
5/16"(8 mm)
Top View
WITHOUT PRE-APPLIED TAPECAT. NO.
WITH PRE-APPLIED TAPECAT. NO.
MAXIMUM GAP
SDTDF SDTDFT2 5/16" (8 mm)
98" (2.49 M) STOCK LENGTHS
• Seals Gaps From 3/16" (5 mm) to 1/4" (6 mm)
• Single-Piece Bottom Sweep
Translucent 'V' Seals are used only on doors swinging one way to seal gaps from 3/16" (5 mm) to 1/4" (6 mm). Adhere 5/16" (8 mm) rigid leg toglass edge or wall using our Clear Very Hi-Bond Tape. Door closes intosoft vinyl leg.
TRANSLUCENT VINYL 'V' SEAL
This ultra clear One-Piece Bottom Rail is snapped on the bottom of thedoor to achieve a seal. Because it is a single-piece sweep, it means thevinyl seal that hangs down from t he sweep will firmly direct the water backinto the shower enclosure.
ONE-PIECE BOTTOM RAIL WITH CLEAR WIPE
Side View
Glass Door
Curb
"X"
"Y" CAT. NO. "X" "Y" GLASS SIZE SUGGESTED GAP
P501BRP661BR
7/16" (11 mm)1/2" (12 mm)
7/16" (11 mm)7/16" (11 mm)
3/8" (10 mm)1/2" (12 mm)
7/16" (11 mm)7/16" (11 mm)
98" (2.49 M) STOCK LENGTHS
Soft Leg
Top Views
Clear Very Hi-Bond Tape
Hinge Pivot Point
Clear VeryHi-BondTape
Open
Glass or WallStrike Side
'V' Seal Mounted to Glass
One Way Outswing Doors
Glass or WallHinge Side
Clear Very Hi-Bond Tape'V' Seal Mounted to Wall
Hinge Pivot Point
Clear VeryHi-BondTape
Open
Glass or WallStrike Side
Glass or WallHinge Side
5/16” (8 mm)Rigid Leg
5/16” (8 mm)Soft Leg
WITHOUT PRE-APPLIED TAPECAT. NO.
WITH PRE-APPLIED TAPECAT. NO.
MAXIMUM GAP
SDTS SDTST2 1/4" (6 mm)
MINIMUM ORDER IS FIVE 98" (2.49 M) STOCK LENGTHS
Translucent 'L' Seals are offered in two sizes and rigidity.They should be used on outswing doors only, and can beused on both hinge and strike side jambs. Cat. No. SDTNLhas a slightly softer and shorter sealing leg than Cat. No.SDTL. Use our Clear Very Hi-Bond Tape to apply the rigid legof the "L" Seal to the surface. The soft leg of the "L" will actas a seal, allowing for a quiet and forgiving door closure.
TRANSLUCENT VINYL 'L' SEALS
Soft LegMINIMUM ORDER IS FIVE 98" (2.49 M) STOCK LENGTHS
Fixed Panel
Open
Glass DoorHingePin
Clear VeryHi-Bond Tape
Clear VeryHi-Bond Tape
OpenGlass Door
HingePivot Point
Glass or WallStrike Side
Top Views
Fixed Panel
Glass or WallHinge Side
Clear VeryHi-Bond Tape
3/8" (10 mm)Soft Leg
5/16" (8 mm)Rigid Leg
CAT. NO. SDTL
5/16" (8 mm)Soft Leg
5/16" (8 mm)Rigid Leg
CAT. NO. SDTNL
• Very Popular Single Leg Seal
WITHOUT PRE-APPLIED TAPECAT. NO.
WITH PRE-APPLIED TAPECAT. NO.
MAXIMUM GAP
SDTW SDTWT2 7/16" (11 mm)
Translucent 'T' shaped Edge Wipe can be used on inswing oroutswing doors. Closes gaps up to 7/16" (11 mm), and can betrimmed for smaller gaps. Adhere 5/16" (8 mm) rigid base toglass edge or wall using our Clear Very Hi-Bond Tape. Minimumorder is five lengths.
98" (2.49 M) STOCK LENGTHS
GlassDoor
Top ViewClear VeryHi-BondTape
Curb
Side View
Clear VeryHi-Bond Tape
Glass Door
Glassor Wall
7/16"(11 mm)
5/16"(8 mm)
TRANSLUCENT VINYL EDGE 'T' WIPE
WITHOUT PRE-APPLIED TAPECAT. NO.
WITH PRE-APPLIED TAPECAT. NO.
MAXIMUMGAP
SDTNLSDTL
SDTNLT2SDTLT2
5/16" (8 mm)3/8" (10 mm)
• Provide Positive Door Closure• Mix and Match Configurations to Achieve Desired Result• Made of Co-Extruded Plastic With Soft Magnetic Receiver• Models for 1/4" (6 mm) to1/2" (12 mm) Thick Glass