VURSA SERIES SHOWER STALL Rough-In Dimensions Finished Dimensions Unit Features Special Notes 48” wide x 37-1/4” deep x 76-1/2” high (with low profile dam) 48” wide x 36” deep x 75-1/4” high (with low profile dam) l One - Piece Fiberglass Composite Construction l Sanitary Grade Polyester Gelcoat Surface l 3-3/8” Dia. Center Drain (see following pages) l 3/4” Threshold for Unobstructed Entry l 1” Floor Flange To Secure Unit Along Threshold l Elevated Corner Accessory Ledges l Flat Wall Design To Accommodate Grab Bar Applications l Textured Floor Pattern l Factory Applied Reinforcement Packages Available (see following pages) l Factory Applied Bar & Seat Packages Available (see following pages) 48-INCH MODEL SHMD-4836 ®
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
VURSA SERIES SHOWER STALL
Rough-In Dimensions
Finished Dimensions
Unit Features
Special Notes
48” wide x 37-1/4” deep x 76-1/2” high (with low profile dam)
48” wide x 36” deep x 75-1/4” high (with low profile dam)
l One - Piece Fiberglass Composite Constructionl Sanitary Grade Polyester Gelcoat Surfacel 3-3/8” Dia. Center Drain (see following pages)l 3/4” Threshold for Unobstructed Entryl 1” Floor Flange To Secure Unit Along Thresholdl Elevated Corner Accessory Ledgesl Flat Wall Design To Accommodate Grab Bar Applicationsl Textured Floor Pattern
l Factory Applied Reinforcement Packages Available (see following pages)l Factory Applied Bar & Seat Packages Available (see following pages)
48-INCH MODEL SHMD-4836
57
®
Order No.: SHMD-4836 (Minimal Dam)
48” x 36”, one-piece gelcoated, flat-wall, fiberglass shower stall with minimal dam for barrier-free entry, dual back wall shelves, and center drain.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
18”
36”
37-1/4”
1-1/4”
3/4” Apron
74-1/2”
1-1/4”
18”
1”
47-3/4”
5”
76-1/2”
1”
35”Inside
1-1/4” 1“ Wide FloorFlange
48”
46” Inside
24”
Left Side WallRight Side WallBack Wall
24”
3-3/8” Dia.Drain
75-1/4”
Shelf
Shelves
Shelf ShelfShelf
2.50” EnhancedContouring Area
Enhanced SlopeFrom Drip Ledge
0.1875” Floor Flange
0.5625” Apron Face
1.00”Floor
Flange
Threshold Pro�le
0.75” Exterior
Standard SlopeTo Drain Outlet
0.75” (3/4-inch) Threshold Pro�le
DripLedge
VURSA SERIES SHOWER STALL®
58
®
Package Order No.: FH (Fair Housing wall reinforcement)
Package Includes: Factory applied, HUD-FHA compliant (Fair Housing), structurally reinforced wall areas (as shown) for the independent field application of bars.
Package Order No.: 3SM (3-side, mid-level wall reinforcement)
Package Includes: Factory applied, 3-side, mid-level, structurally reinforced wall areas (as shown), exceeding ‘Fair Housing’ (HUD/FHA) requirements.NOTE: Factory installed bar packages available using 3SM reinforcement.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
Model: SHMD-6232 / FH(Fair Housing)
(7/25/11)
37“
41” w x 10” hReinforcement
32” w x 10” hReinforcement
38”
37“
32” w x 10” hReinforcement
38”
Control AreaControl Area Control Area
37“
38”
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left Side WallRight Side Wall
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
ControlArea
ControlArea
Model: SHMD-62323SM (3-Side Mid-Level)
(7/18/11)
41” w x 36” hReinforcement
5“
32” w x 36” hReinforcement
32” w x 36” hReinforcement
8” w x 32” hReinforcement
5“8” w x 32” h
Reinforcement
38“
37“
38“38“
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left Side WallRight Side Wall
ActivLifesolutions
ActivLifesolutions
59
Package Order No.: 3SF (3-side, full-wall reinforcement)
Package Includes: Factory applied, 3-side, full-wrap, structurally reinforced wall areas (as shown), exceeding ‘Fair Housing’ (HUD/FHA) requirements, for the independent field application of bars.NOTE: Factory installed bar packages available using 3SF reinforcement.
Package Order No.: TLVRF-LS (2-wall bar & LH seat reinforcement) TLVRF-RS (2-wall bar & RH seat reinforcement)
Package Includes: Factory applied, 2-wall horizontal and single-wall vertical bar reinforcement, and single-wall seat reinforcement.NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “RS or LS” designates seat reinforcement wall.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
Model: SHMD-62323SF (3-Side Full Wrap)
(7/18/11)
5“
41” w x 68” hReinforcement32” w x 68” h
Reinforcement
5“ 5“
32” w x 68” hReinforcement
ControlArea
ControlArea
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left Side WallRight Side Wall
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
Model: SHMD-6232 / TLVRF-RS(8/06/12)
41” w x 10” hReinforcement
32” w x 10” hReinforcement
38”
24”
Control Area Control Area
37“
38”
32” w x 24” hReinforcement
Left Side WallRight (Seat) Wall
5“8” w x 32” h
Reinforcement
50-1/2”
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left Side WallRight (Seat) Wall
ActivLifesolutions
ActivLifesolutions
®
60
®
Package Order No.: TLVRF-DS (3-wall bar & 2-wall seat reinforcement)
Package Includes: Factory applied, 3-wall horizontal and 2-wall vertical bar reinforcement, and 2-wall seat reinforcement exceeding (HUD?FHA) ‘Fair Housing’ requirements.NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.
Package Order No.: BP1-(R or L) (2-bar only package)Upgrade Package No.: BP1-(R or L) WHT (1-1/4” dia., white powder coat, 2-bar only package) BP1-(R or L) OFW (1-1/4” dia., off-white powder coat, 2-bar only package) BP1-(R or L) SNK (1-1/4” dia., satin nickel, 2-bar only package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “R or L” designates RH or LH control wall.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
Control Area
Model: SHMD-6232 / TLVRF-DS(8/06/12)
41” w x 10” hReinforcement
38”38”
Control Area Control Area
37“
38”
5“ 5“8” w x 32” h
Reinforcement8” w x 32” h
Reinforcement
32” w x 36” hReinforcement
32” w x 36” hReinforcement
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left Side WallRight Side Wall
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
35”
40-1/4”
Control Area
26” Bar3”
35”
40-1/4”
24” Bar6” 6”
SHMD-4836 BP1(7/18/12)
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left (Control) WallRight Side Wall
ActivLifesolutions
ActivLifesolutions
61
Package Order No.: BP2-(R or L) (3-bar only package)Upgrade Package No.: BP2-(R or L) WHT (1-1/4” dia., white powder coat, 3-bar only package) BP2-(R or L) OFW (1-1/4” dia., off-white powder coat, 3-bar only package) BP2-(R or L) SNK (1-1/4” dia., satin nickel, 3-bar only package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “R or L” designates RH or LH control wall.
Package Order No.: TL-(RS or LS) (2-bar & folding seat package)Upgrade Package No.: TL-(RS or LS) WHT (1-1/4” dia., white powder coat, 2-bar & folding seat package) TL-(RS or LS) OFW (1-1/4” dia., off-white powder coat, 2-bar & folding seat package) TL-(RS or LS) SNK (1-1/4” dia., satin nickel, 2-bar & folding seat package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 2-bar and folding seat package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “RS or LS” designates seat wall.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
35”
40-1/4”
Control Area
26” Bar3”
35”
40-1/4”
24” Bar6” 6”
SHMD-4836 BP1(7/18/12)
24” Bar
4”
Vertical Bar
SHMD-4836 BP2(7/18/12)
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left (Control) WallRight Side Wall
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
35”
40-1/4”
Control Area
26” Bar3”
35”
40-1/4”
Fold-UpSeat
24” Bar6” 6”
18”
15”
1-1/2”
4”29-1/2”
18”Seat Ht.
56-1/2”
SHMD-4836 TL-RS(05/22/12)
Left (Control) WallRight (Seat) Wall 1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left (Control) WallRight (Seat) Wall
Create Spec PDF
ActivLifesolutions
ActivLifesolutions
®
62
®
Package Order No.: TLV-(RS or LS) (3-bar & folding seat package)Upgrade Package No.: TLV-(RS or LS) WHT (1-1/4” dia., white powder coat, 3-bar & folding seat package) TLV-(RS or LS) OFW (1-1/4” dia., off-white powder coat, 3-bar & folding seat package) TLV-(RS or LS) SNK (1-1/4” dia., satin nickel, 3-bar & folding seat package)
Package Includes: Factory installed, 1-1/2” dia. stainless steel, 3-bar and folding seat package with basic reinforcement for components (as shown).NOTE: Enhanced reinforcement available, see 3SM & 3SF packages.NOTE: “RS or LS” designates seat wall.
Dimension Tolerances+ 0 / -3/8-inch
SHMD-4836(04/04/12)
35”
40-1/4”
Control Area
26” Bar3”
35”
40-1/4”
Fold-UpSeat
24” Bar6” 6”
18”
15”
1-1/2”
4”29-1/2”
18”Seat Ht.
56-1/2”
SHMD-4836 TL-RS(05/22/12)
Left (Control) WallRight (Seat) Wall
24” Bar
4”
Vertical Bar
SHMD-4836 TLV-RS(7/18/12)
1-1/4”Back Wall
1-1/4”36” 1-1/4” 48”
3/4”Apron
Left (Control) WallRight (Seat) Wall
Create Spec PDF
ActivLifesolutions
63
Photographic images may include optional components and appear different than actual product. Dimensions shown are maximum. Due to the nature of the materials involved, actual unit dimensions can vary (tolerances: +0 / -3/8 inch).Oasis reserves the right to modify or discontinue product and/or associated equipment without prior written or verbal notification or obligation.
SHMD4836.00.081513
Related Documents
