Shizuoka Hobby Show 2008 Table of Contents - Wheels … · Shizuoka Hobby Show 2008 Table of Contents ... 48206 1/35 R/C German Panzerkampfwagen IV Ausf.J 4950344482061 ... (Type

Coming Soon!Shizuoka Hobby Show 2008

Table of Contents21062 1/12 Kawasaki KR500 ‘82 (Finished Model) 4950344210626

21201 1/12 Repsol RC211V ‘06 Parts Panel 4950344212019

21202 1/12 Konica Minolta RC211V ‘06 Parts Panel 4950344212026

21203 1/12 Honda RC211V ‘06 Parts Panel 4950344212033

21204 1/12 LCR Honda RC211V ‘06 Parts Panel 4950344212040

12037 1/12 Lotus type 78 (w/Photo Etched Parts) 4950344120376

12038 1/12 Porsche 935 “Martini” (w/Photo Etched Parts) 4950344120383

24300 1/24 Nissan GT-R 4950344243006

32559 1/48 U.S. Army Staff Car 1942 4950344325696

32561 1/48 German Africa Corps Infantry Set 4950344325610

35292 German Panzerkampfwagen II Ausf.A/B/C (Sd.Kfz121) 4950344352920

(French Campaign)

35293 German Infantry Set (French Campaign) 4950344352937

61102 1/48 F-16C [Block 32/52] “Thunderbirds” 4950344611027

61103 1/48 Mitsubishi A6M5/5a Zero Fighter (Zeke) 4950344611034

89771 1/35 Russian Tank Division Reconnaissance Team 4950344897711

w/Amphibious 1/4 Ton 4x4 Truck

89772 1/35 U.S. Modern Infantry w/Accessory 4950344897728

89773 1/48 F-117A Nighthawk and U.S. Modern 4x4 Utility Vehicle 4950344897735

12623 1/24 Nissan GT-R Photo Etched Parts Set 4950344126231

12624 1/48 Mitsubishi A6M Zero Fighter Detail Up Parts Set 4950344126248

12625 1/16 1/35 German Military Insignia Decal Set 4950344126255

18625 Dash-1 Emperor (MS Chassis) 4950344186259

15374 Mini 4WD Pro Lightweight Center Chassis 4950344153749

94659 Height Adjustable Roller w/FRP Mount 4950344946594

94662 Aluminum WidePlate Set (Gold) 4950344946624

94663 Aluminum Wide Pate Set (Pink) 4950344946631

69511 Racing Mini 4WD Japan Cup Junior Circuit 4950344997442

Slope Sections Set (2pcs.)

55101 Powerchamp FD 4950344551019

57777 1/10 Expert Built Suzuki SX4 WRC (TT-01 Type-E Chassis) 4950344577774

57778 1/10 Expert Built Volkswagen Golf GTI Cup Car 4950344577781

(TT-01 Type-E Chassis)

23655 1/14 R/C Tractor Truck 3-Axle Reefer Semi-Trailer 4950344236558

(Factory-Finished w/Light Unit)


56321 1/14 R/C Tractor Truck Scania R470 Highline Metallic Special 4950344563210

48206 1/35 R/C German Panzerkampfwagen IV Ausf.J 4950344482061

56026 1/16 R/C German Panzerkampfwagen IV Ausf.J w/Option Kit 4950344560264

58408 1/10 R/C Suzuki SX4 WRC (TT-01 Type E) 4950344584086

58409 1/10 R/C ARTA Garaiya (TB-03) 4950344584093

58410 1/10 R/C Volkswagen Golf GTI Cup Car (TT-01 Type E) 4950344584109

58411 1/10 R/C Nissan GT-R (TT-01 Type E) 4950344584116

42107 1/10 R/C TB Evolution 5 MS Chassis Kit 4950344421077

42116 3x10mm Blue Titanium Turn Buckle Shaft (2pcs.) 4950344421169




42120 3x42mm Blue TItanium Turn Buckle Shafts (2pcs.) 4950344421206

42121 3x45mm Blue Titanium Turn Buckle Shafts (2pcs.) 4950344421213

42122 Wrench for Blue Titanium Turn Buckle Shaft 4950344421220

42123 High Performance ESC Volac MS C3 4950344421237

49496 1/10 R/C DF-03 MS 4950344494965

84023 1/10 R/C FWD High Performance Racing Car M-03R 4950344840236

Chassis Kit (Blue Plated Version)

51337 1/10 R/C Suzuki SX4 WRC Body Parts Set 4950344513376

51339 1/10 R/C Volkswagen Golf GTI Cup Car Body Parts Set 4950344513390

51340 1/10 R/C Nissan GT-R Body Parts Set 4950344513406

xxxx 1/10 R/C F103RT (Type T) Body Parts Set (Tentative) 4950344xxxxxx

54032 Anerobic Gel Thread Lock 4950344540327

54037 DB01 Aluminum Suspension Mount (Front) 4950344540372

54038 DB01 Aluminum Suspension Mount (Rear) 4950344540389

54039 DB01 Aluminum Suspension Block (2pcs.) 4950344540396

54040 DB01 Motor Heat Sink 4950344540402

54041 DB01 Carbon Fiber-Reinforced Chassis 4950344540419

54045 TA05-IFS R Drive Belt (342mm) 4950344540457

54050 TA05-IFS R 18T Center One-Way Set 4950344540501

54051 TRF501X/DB01 18T Center One-Way Set 4950344540518

54052 TB-03 Aluminum Universal Propeller Shaft Set 4950344540525

54053 TB-03 Aluminum Propeller Joint Set (Rear) 4950344540532

54054 TB-03 Aluminum Motor Adaptor 4950344540549


54055 TB-03 04 Spur Gear (96T) 4950344540556

54056 TB-03 Aluminum Dif Joint Set 4950344540563

54057 TB-03 Front One Way Unit 4950344540570

54058 TT-01E Aluminum Steering Set 4950344540587

54059 TT-01E Front Carbon Damper Stay 4950344540594

54060 TT-01E Rear Carbon Damper Stay 4950344540600

49382 On Road Tune Hard Spring Set (White) 4950344493821

49389 On Road Tune Hard Spring Set (Milky Blue) 4950344493890

49425 TA05 Aluminum Differential Joint (Blue) 4950344494255

49426 TRF415 Aluminum Differential Joint Set (Blue) 4950344494262

49462 TA05 Urethane Bumper (Black) 4950344494620

49463 TRF415 Urethane Bumper (Black) 4950344494637

49466 M-03 Blue Plate Frame Set 4950344494668

49471 TA05 Wide Pitch Front One-Way Pulley (36T Size/Black) 4950344494712

49472 TA05 Wide Pitch Differential Pulley (36T Size/Black) 4950344494729

49494 TB Evo V MS Screw Set (Titanium & Aluminum) 4950344494941

49495 TRF416 2.5mm Lower Deck 4950344494958

49499 TB-03 Titanium Screw Set 4950344494996

84000 TA05 Center One-way Set (black) 4950344840007

84001 TA05 Aluminum Motor Heat Sink (black) 4950344840010

84002 TA05 Aluminum Center Plate (black) 4950344840021

84003 TA05 Aluminum Motor Mount (black) 4950344840030

84004 TA05 Aluminum Racing Steer Set (black) 4950344840045

84005 TA05 -IFS Aluminum Rear Upper Light (0 degrees/black) 4940344840052

84006 TA05 Alluminum Differential Joint (black) 4940344840060

84007 46mm Lightweight Steering Shaft (black) 4940344840076

84008 TRF Special Damper (Hard coat/black) 4950344840083

84009 Turbo Down Retainer (black) 4950344840090

84010 TA05 Lightweight Aluminum Servo Stay (black) 4950344840106

84011 Aluminum Wheel Hub Clamp (5mm thick/black) 4950344840113

84012 Battery Plate Aluminum Mount Screws (black) 4950344840120

84013 5mm Aluminum Short Ball Nut (black) 4950344840137

84014 5x5mm Aluminum Ball Connector (black) 4950344840144

84015 5x8mm Aluminum Ball Connector (black) 4950344840151

84016 Stabilizer Rod Stabilizer Bar (black) 4950344840168


84017 Aluminum Stabilizer End (black) 4950344840175

84018 Carbon D Stay Setting Spacer (black) 4950344840182

84019 3x10mm Aluminum Turn Buckle Shaft (black) 4950344840199




84025 TRF416 Lower Deck for Stick Type Battery 4950344840250

84026 F350 Axle Parts Set 4950344840267

84027 Super Clod Buster Axle Parts Set 4950344840274

84028 TLT-1 Axle Parts Set 4950344840281

74080 Craft Tweezers 4950344740802

74532 Tamiya Spray Work HG Airbrush III 4950344745326

87098 Tamiya Weathering Master E Set. Dry Brush Effect, 4950344870981

Yellow, Grey, Green.

89912 Iridescent Blue / Green 4950344899128

71121 2-Legged Walking Robot w/Wind-Up Generator 4950344711215

71122 4-Legged Walking Robot w/Wind-Up Generator 4950344711222

71123 Sumo Wrestler Robot w/Wind-Up Generator (Tentative) 4950344711239

Previous Announced Items

14111 1/12 Kawasaki ZZR 1400 4950344141111

12622 1/350 Crew Set (144 pcs.) 4950344126224

60401 1/100 Space Shuttle Orbiter 4950344986842

56709 1/12 TamTech Gear Porsche 935 “Martini” 4950344567096

23211 Ferrari GTO (Semi Assembled Premium Model) 4950344232116

94660 Thunder Shot Mk.II Pink Special 4950344946600

94661 MS Chassis Type R 4950344946617

49497 1/8 Glow Engine R/C 4x4 Racing Truck TRF801XT 4950344494972

Highly Confidential Items.

Coming Soon!Shizuoka Hobby Show 2008Confidential Until May 15th

21062 1/12 Kawasaki KR500 ‘82 (Finished Model)

Verwacht 2008 Q3

About the Model- This is a 1/12 scale finished model of Grand Prix World Champion rider Kork Ballington’s #8 1982 Kawasaki KR500.- The die-cast in the engine adds to the weight of the bike.- AS and ABS resin are used for a strengthening the model.- Packaging features clear window to enable display of the model even while inside the box.- Has top quality pad-printed markings.- Comes in a different 1980’s lime green color than the recent 1/12 Kawasaki Ninja ZX-RR ‘06 #56 (21066).

Riding on the back of the two time 250cc and two time 350cc World Champion Kork Ballington’sriding skills, Kawasaki debuted in the 500cc Road Race Championship in 1980. He raced on aKR500 works machine which had an aluminum monocoque frame. It had a 498cc water-cooledsquare-four engine, and an independent rear unit suspension.

Image shows assembly kit model

FINISHED MODELS


21201 1/12 Repsol RC211V ‘06 Parts Panel

Verwacht 2008 Q4

21202 1/12 Konica Minolta RC211V ‘06 Parts Panel

Verwacht 2008 Q4

21203 1/12 Honda RC211V ‘06 Parts Panel

Verwacht 2008 4

21204 1/12 LCR Honda RC211V ‘06 Parts Panel

Verwacht 2008 Q3

PARTS PANEL (MASTERWORK COLLECTION)

Image shows drawing

The parts panel for the above corresponding RC211V ‘06 motorcycles would be a beautifuledition to anyone’s model collection, exhibit, or living room wall. Every single detailed part ofthe chosen 1/12 Masterwork motorcycle has been carefully displayed on this beautifully de-signed panel. The panel has wood frame and an acrylic cover which beautifully matches itscontents. It also has an Aluminum nameplate with metal transfers adding to the quality finish ofthis exquisite Parts Panel.


12037 1/12 Lotus type 78 (w/Photo-Etched Parts)

Verwacht 2008 Q3

Lotus was the pioneering racing team that invented the wedge-shaped body, with inverted air-craft-like wings to achieve a greater down force effect that considerably improved handling andperformance. In 1977, when it first appeared on the racing circuit, Lotus won 5 races but missedout on the championship. But the following year in 1978, and in 1979 they won the titles withdominating performances. The inverted wing was used in the early stages in 1978 but theymade the switch full-time in the 1979 season. The specifications are for the 1977 British GP,and the Olympus logo on the side of the car are the specifications for the spare car.

About the Model- Re-release of the popular big scale Lotus Type 78 F1 race car with new photo-etched parts.- Photo-etched parts include brake discs, radiator, 2 types of front and rear wing tips, and seatbelts for adding extra finishing details.- Cloth seatbelts are also included.- Comes in a newly designed package.

*Image shows drawing

STATIC MODELS


12038 1/12 Porsche 935 “Martini” w/Photo-Etched Parts

Verwacht 2008 Q3

About the Model- This is a fully-detailed 1/12 scale assembly kit.- Front and rear hoods, as well as the doors can all be opened to reveal the detailed engine bay and interior.- The photo-etched parts and metal transfer set bring out the unique characteristics of the Porsche.- The suspension is also accurately reproduced. Combine this with the photo-etched brake discs for greater realism.- The seatbelt, which has not been reproduced until now, can be depicted with both photo- etched and cloth parts.

The Porsche 935 racing model based on the 930 turbo and was developed in accordance withthe FIA Group 5 rules. It had a turbocharger made by KKK, and a flat-6 2857cc motor which hada maximum output of 590ps. At the 1976 World Championships, it was involved in all sevenraces. At first, they recorded overwhelming victories in races throughout the world. Later therewas an intercooler problem which led to a troubled season for Porsche, but they were able towin the championship in the end.

*Image shows prototype


24300 1/24 Nissan GT-R

Verwacht 2008 Q3

At the 2007 Tokyo Motor Show, much attention was paid to the new Nissan “multi-performancesports car.” This model had dropped name Skyline and became simply the Nissan GT-R. Alongwith the name change, the car also had some other mechanical changes, especially under thehood. Gone is the straight six, and in its place there is a new twin-turbo V6, which has an amaz-ing 480 horse power with 60kg of torque. With amazing speed and cornering ability, the GT-Rhas reached the super car plateau.

About the Model- 1/24 scale assembly kit of the Nissan GT-R. Length 197mm Width 82mm.- Muscular body styling has been accurately reproduced thanks to a detailed study of the actual car.- The hood can be opened and closed.- Highly-detailed engine and separately-molded parts for the induction box.- Wheels, muffler, and induction box parts have been metal plated for an eye-catching finish.

Image shows drawing


32559 1/48 1942 U.S. Army Staff Car Model 1942

Verwacht 2008 Q3

During WWII, the U.S. Military used various makes of civilian cars as military staff cars. At thistime, the U.S. Military mostly used the 1942 sedan for this purpose. This 4.9m long sedan waspowered by a 90hp, 6-cylinder 3700cc motor. This sedan was widely used as a Staff Car forhigh-ranking officers and as transport for aviators.

About the Model- Data for the modeling the U.S. Army Staff Car was taken from an actual vehicle at the Minne- sota Aviation Museum.- From the large compilation of photos, the shape of the vehicle was accurately reproduced.- The chassis is made of die-cast metal which adds to the model’s feeling of weight.- A new driver figure comes supplied with the model.- You are able to add this Staff Car with other 1/48 Military Miniature Series figures and vehicles such as the M4 Sherman tank and the M26 Pershing tank for diorama creation.- Also, by combining the Staff Car with fighter planes such as the P-51D and P-47 you can really assemble an exciting airfield diorama.

Image shows drawing


32561 1/48 German Africa Corps Infantry Set

Verwacht 2008 Q3

At the beginning of WWII, the Italian army invaded and attacked Egypt but received severedefeats from British-led counterattacks. Due to this, Field Commander Rommel was sent toNorth Africa to save the situation. It was decided that two German divisions would support theirItalian counterparts in the invasion of English-held Egypt, which resulted in a complete and utterdefeat for the defending English forces. Always commanding from the frontlines, Rommel andhis African Corps chased the British troops, eventually cornering them at the Egyptian border.With Rommel’s success, he was both respected and feared by the English-led forces and wascalled “the Desert Fox” for his skillful desert campaigns.

About the Model- Set includes 8 soldier figures with a variety of realistic expressions.- The tent, which comes with this set, has a cloth like feel and a lifelike sag effect.- The set comes together with parts for accessories such as a wireless radio and battery.- Parts for jerry cans, fuel drums, and wooden crates also included to liven up the surround- ings.

Image shows drawing


35292 1/35 German Panzerkampfwagen II Ausf. A/B/C (Sd.Kfz. 121)

(French Campaign)

Verwacht 2008 Q3

After WWI, Germany pushed forward the development of battle tanks under a blanket of se-crecy. The Panzerkampfwagen II used the Panzerkampfwagen I’s hull and came armed with a2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements includ-ing a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer IItanks were manufactured. They led the surprise invasion on Poland and were the main tanksused in the attack on France. Later, they were successfully used in reconnaissance missionsuntil the end of the war.

About the Model- 1/35 model of the German Panzerkampfwagen II tank.- Supplemental armor plate parts can be installed in the same manner as the actual tank.- Various hatches throughout the tank are separately-molded, and armor panels are included to accurately recreate the different variants.- Assembly-type tracks feature single-piece sections for effortless construction.- Comes with a commander figure and three kinds of markings for the French campaign.- Display the Panzerkampfwagen II with other vehicles such as the French Battle Tank B1 bis, French Armored Carrier UE, German 3 Ton 4x2 Cargo Truck, and the new German Infantry Set (French Campaign) to create dioramas of the early WWII battlefield.

Image shows full-size vehicle


35293 1/35 German Infantry Set (French Campaign)

Verwacht 2008 Q3

About the ModelSet includes 5 figures to depict German infantry in early-WWII.- A soldier carrying an MP40 in both hands (can also be modeled to hold a rifle).- A soldier in kneeling position preparing to fire his rifle. (can also be modeled to be holding binoculars).- A marching soldier carrying his rifle on his shoulder (can also be modeled to be holding an MP40).- A soldier in prone position with his MG34 machine gun (Accessories that correspond with the MG42 are also included).- The ammo bearer who is feeding the ammunition from the ammunition case.- All five soldier figures come with new helmets (2 of which come with camouflage belts).- Also included are two mounting plates for the figures and a wide array of accessories to enable a variety of poses and equipment.

During WWII, the German combat uniform included a distinctively-shaped helmet which had astretched neckline for added protection. The M36 combat uniform was an overall field gray colorwith a dark green collar, and featured four front pockets. The German soldiers also wore longblack boots along with this basic uniform. At parades, the German soldiers would lift their legshigh without bending their knees and perform the intensively impressive “Goose Step March.”

Image shows drawing


61102 1/48 F-16C [Block 32/52] “Thunderbirds”

Verwacht 2008 Q3

About the Model- In addition to the already in use Block 32 F-16, you can assemble a Block 52 as well.- Smoke generator pipe is attached to the jet nozzle, just like the actual aircraft, and an exclu- sive newly-developed pilot figure is included.- Crisply recreated markings allow depiction of the colorful Thunderbirds livery.- The 60 year anniversary decals are also included.- In addition to the 2007 specifications, Block 52 No.1 markings are also prepared.

In 1953, the Thunderbirds were formed as an Air Demonstration Squadron. From 1984 theF-16A was used, but in 1992 they had changed to the F-16C model. Every year from Marchthrough to November, the Thunderbirds perform about 40 times at various air shows throughoutthe world and America. Through these aerobatic performances, the Thunderbirds do the public-ity work of the American Air Force, promoting international friendship. In November 2007, it wasdecided to put the new Block 52 F-16 into use as of 2009, instead of the Block 32 F-16.


61103 1/48 Mitsubishi A6M5/5a Zero Fighter (Zeke)

Verwacht 2008 Q3

About the Completely New Model- The Model 52 featured additional wing-mounted machine guns with belt-feed system. The Model 52 kou, with greater ammunition load can also be depicted.- Parts for the Model 52 kou’s lengthened spinner, main wing panels, gun covers, and external fuel tank are also included to enable accurate reproduction.- The main wing flaps can be set in an up or down position.- A removable 300 liter metal belly tank is included.- The one-piece engine cowl is made from precision-crafted plastic, and cowl flaps can be posed in opened or closed positions.- There are 2 types of markings for the Model 52, and 1 kind of marking for the Model 52 kou.- 4 pilot figures in various lifelike poses also included.

At the beginning of the Pacific War, the Zero was an excellent fighter plane. As the war pro-gressed, Model 21, 22, and 32 were introduced and all received numerous improvements suchas greater speed and armor reinforcement. During the Pacific War, the Zero was the mainfighter plane of the Japanese Navy. The Model 52 continued fighting and appeared in the SolomonIslands in 1943. The wingspan was designed 50cm shorter and in a semicircular shape, differ-ent than its Model 22 counterpart. With the improvements of the plane’s balance, speed, armorreinforcement, maneuverability, and cruising speed, it resulted in an excellent fighter. The Model52 Zero took part in the battle at the Mariana Islands, Iwo Jima, and Okinawa, and continued tosupport the Navy and land forces at the frontlines until the end of the war.

Image shows drawing


89771 1/35 Russian Tank Division Reconnaissance Team w/Amphibious

1/4 Ton 4x4 Truck

Verwacht 2008 Q3

During WWII, U.S. manufacturers developed the 1/4 ton 4x4 amphibious truck. The U.S. Militaryand Navy widely deployed it, and at the same time several thousand of them were given to theRussians. In Russian service, the amphibious truck played a part in many fording operationsincluding at the Oder river, and proved itself to be very reliable. It was used right up until theBerlin Offensive Operation in May 1945.

About the Model- In this release of the 1/4 ton 4x4 Amphibious Truck, Russian decals, including ones for various Russian slogans are included.- Also included are 2 American soldier figures and decals for U.S. markings.- It is possible to assemble the model to create a truck in American specifications.- Comes with four Russian soldiers in relaxed lifelike poses, made by ICM.

LIMITED EDITION STATIC MODELS

LIMITED EDITION


89772 1/35 U.S. Modern Elite Infantry w/Accessory

Verwacht 2008 Q3

The 1991 Gulf War was the first international dispute following the Cold War. In January 1991,following the August 1990 Iraqi invasion of Kuwait, and the build up of multi-national militaryforces, “Desert Storm” began with the bombing of Iraq. In February, Iraqi military forces fledKuwait under the “Desert Sword” battle plan, and on March 3, under a provisional cease fireagreement, the war was officially over. The Gulf War had attracted much attention due to the useof high tech weaponry such as the stealth bomber and Patriot missiles, but it was the groundtroops that had ensured victory for the multi-national force.

About the Model- There are four American infantry figures in the set.- The soldiers are wearing PASGT body armor and M88 helmets.- The soldiers are in a variety of cautious poses, armed with M60 and M16A machine guns.- The highly detailed figures are produced by ICM, Ukraine.- Set includes:

*M60E3 machine gun and a M249 light machine gun*Stinger anti-air missile*Ammunition and shell cases*Field operations and food provisions carton sheet.

- Furthermore, two camouflaged tank driver figures (one full figure, one torso) are included.- You can use this set as a small diorama, or add it with the Abrams tank and other figures to create a larger diorama.

LIMITED EDITION


89773 1/48 F-117A Nighthawk and U.S. Modern 4x4 Utility Vehicle (Tentative)

Verwacht 2008 Q3

Image shows box art

With the new combination packaging of the F-117A and the U.S. Modern 4x4 Utility Vehicle,model builders will get a set with terrific value. During the Gulf War, the F-117A was based atthe King Khalid International Airport in Saudi Arabia, which was under the constant protectiveeye of the Modern 4x4 Utility Vehicle. The box art of the package shows an image whichreflects the tension of the situation in those times.

About the Model- This is a 1/48 scale model set that includes the U.S. Modern 4x4 Utility Vehicle, which was previously released as a 1/35 miniature military model.- The rubber tires come realistically reproduced with tread patterns.- Doors can be set in an open or closed position.- Dashboard and interior are realistically reproduced.- The upper part of the vehicle has a highly placed ring mount for the gunner.- Comes with a 1/48 scale M60 machine gun.- Included are two military figures.- Also included are 3 kinds of markings for units that took part in the Gulf War.

LIMITED EDITION


12623 1/24 Nissan GT-R Photo-Etched Parts Set

Verwacht 2008 Q3

Use these precision-made photo-etched parts to add even more exquisite detail to your GT-Rfor the ultimate realistic finish.

About the SetThis set includes the following:

- Front grill mesh- Front bumper air scoop mesh- Rear bumper air duct mesh- Front and rear brake discs- Steering column paddle shifter- Intercooler- Fuel filler cap- Accelerator pedal- Brake pedal- Foot rest- Two kinds of license plates- Name plate- A metal muffler tip.

DETAIL UP PARTS

Image shows drawing


12624 1/48 Mitsubishi A6M Zero Fighter Detail Up Parts Set

Verwacht 2008 Q3

Image shows drawing

Assemble your 1/48 Mitsubishi A6M Zero Fighter (Zeke) with this high-quality detail up partsset. These extra finishing touches will really add to the display presence of your model.

About the Set- The pitot tube is made of stainless steel.- Metal 20mm cannon barrels have a realistic black-colored finish.- Parts included for seat belts to add more detail to the cockpit.- Included wheel chocks are perfect for use in an airfield or flight deck diorama.


12625 1/16 1/35 German Military Insignia Decal Set

Verwacht 2008 Q3

No image available

Use these easy-to-use German Military Insignia decals to add even more exquisite detail toyour WWII German military figures. These are designed with the modeller in mind to save timeand stress allowing for a more realistic finish.

Coming Soon! 57777 1/10 Expert Built Suzuki SX4 WRC (TT-01 Type E Chassis)

Verwacht 2008 Q3

About the SX4 WRCThe SX4 is Suzuki’s latest entry to the World Rally Championship. Taking the compact 5-doorhatchback as a base, Suzuki gave the car WRC-spec modifications including wider body, newsuspension and transmission, a 4WD system, and a 300hp turbocharged 2-liter engine. Afterundergoing some preliminary tests during the 2007 season, the team and its cars made their fulldebut in 2008. Driven by Toni Gardemeister and Per-Gunnar Andersson, the SX4 finished in thepoints during its first race, the Monte Carlo Rally.

About the Model- Newly evolved TT-01 type E chassis.- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength.- New front and rear uprights are also made from durable fiberglass-reinforced resin.- Improved steering linkage design features TA05 steering posts for sharper steering response.- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level race- spec machines.- Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.- New-mold 1.0mm SX4 WRC body made from lightweight polycarbonate material.- Injection-molded side mirrors and rear wing provide crisp detail.- Includes ESC (TEU-101BK), Type 540 motor, and 2-channel R/C system and front and rear LED lights.- 7.2V battery and charger separately required.- Wide variety of Option Parts are separately available to customize your machine.

RADIO CONTROL VEHICLES


57778 1/10 Expert Built Volkswagen Golf GTI Cup Car (TT-01 Type E)

Verwacht 2008 Q3

Image shows drawing

About the Golf GTI Cup CarThe Golf GTI Cup is a one-make race series organized by Volkswagen Group Japan. The racesfeature Golf GTI cars which have been modified and outfitted for track use. These modificationsinclude 4-point seatbelts, roll cage, and DSG (Direct Shift Gearbox). Owners also apply colorfulliveries to set their car apart from the others. The series has 5 races throughout Japan, andencourages both seasoned racers and amateurs to go out and participate.

About the Model- Newly evolved TT-01 type E chassis.- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength.- New front and rear uprights are also made from durable fiberglass-reinforced resin.- Improved steering linkage design features TA05 steering posts for sharper steering response.- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level race- spec machines.- Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.- New-mold 1.0mm SX4 WRC body made from lightweight polycarbonate material.- Injection-molded side mirrors and rear wing provide crisp detail.- Includes ESC (TEU-101BK), Type 540 motor, and 2-channel R/C system and front and rear LED lights.- 7.2V battery and charger separately required.- Wide variety of Option Parts are separately available to customize your machine.


56321 1/14 R/C Tractor Truck Scania R470 Highline Metallic Special

Verwacht 2008 Q3

About the Model- Length: 452mm, Width: 187mm, Height: 293mm, Wheelbase 272mm.- The motor and transmission are in the frontal part of the chassis which has a metal ladder frame and it drives just like the real thing.- Has a metal leaf spring suspension.- 4 channel transmitter not included.

Since the introduction of the Tractor Truck Scania R470 Highline, sales have continuedfavorably. This time, we are adding a special metal plated version of the R470 to the otherfour R/C tractor trucks in its line. Like in previous sales of imported and domestic kits, itcomes fully operational with a 4 channel transmitter and a MFC-01 unit.

Image shows prototype


48206 1/35 R/C German Panzerkampfwagen IV Ausf.J

Verwacht 2008 Q3

Following the Panther Type G, the next 1/35 scale R/C tank release is the Panzer IV Ausf.J. Notonly does it feature all the sharp details of a static model, the new radio control system gives thetank an extra dimension for another level of enjoyment.

About the Panzer IV Ausf.JThe Panzer IV was the workhorse of the German army and remained in production throughoutthe entire war thanks to constant improvements. Due to its low cost and high reliability, productionof the Panzer IV continued even after more effective tanks like the Panther entered service. Thelast of the series, the Ausf.J, was armed with an L/48 75mm gun and less components to simplifyconstruction.

About the Model- 1/35 R/C German Panzerkampfwagen IV Ausf.J assembly kit.- New parts for lower hull to enable installation of running gear and internal mechanisms.- Assembly-type caterpillar tracks provide realistic tank movement and can be adjusted by using a tensioner made from durable die-cast metal.- Compact gearboxes with 0.4 gear modules and turret/gun gear unit are pre-assembled.- FM27MHz R/C system enables forward/reverse, right/left turning, pivot turning, turret rotation, and gun elevation, all controlled via push-button type transmitter.- Convenient battery compartment access hatch on lower hull enables easy battery replacement.- 1 006P(9V)/6F22 alkaline battery for transmitter and 4 R03/AAA/UM4 alkaline batteries for tank separately required.

Image shows drawing


56026 1/16 R/C German Panzerkampfwagen IV Ausf.J

w/Option Kit

Verwacht 2008 Q3

Image shows drawing

Following the Jagdpanther tank destroyer, Tamiya is further expanding the 1/16 scale R/C tanklineup with the Panzer IV Ausf.J. This widely-used medium tank would look fantastic alongsidethe previously released Tiger I, King Tiger, Panther, and Jagdpanther tanks.

About the Panzer IV Ausf.JThe Panzer IV was the workhorse of the German army and remained in production throughoutthe entire war thanks to constant improvements. Due to its low cost and high reliability, productionof the Panzer IV continued even after more effective tanks like the Panther entered service. Thelast of the series, the Ausf.J, was armed with an L/48 75mm gun and less components to simplifyconstruction.

About the Model- 1/16 R/C German Panzerkampfwagen IV Ausf.J assembly kit.- Distinctive stepped hull of the tank is accurate reproduced.- Dual gearboxes can operate together or individually for realistic tank movement.- Includes DMD Control Unit (T-03) and DMD Multi-Function Unit (MF-01) to put turret rotation, gun elevation/depression, and realistic light and sound action at your fingertips.- Onboard speaker reproduces realistic engine sounds.- Main gun and machine gun firing accompanied by LED flashes for greater realism.- Install ITEM 53447 1/16 R/C Tank LED Battle System (sold separately) for exciting 1v1 or team battles with other similarly equipped Tamiya R/C tanks.- 4-channel R/C system, 7.2V battery and charger are separately required.


58408 1/10 R/C Suzuki SX4 WRC (TT-01 Type E)

Verwacht 2008 Q3

About the SX4 WRCThe SX4 is Suzuki’s latest entry to the World Rally Championship. Taking the compact 5-doorhatchback as a base, Suzuki gave the car WRC-spec modifications including wider body, newsuspension and transmission, a 4WD system, and a 300hp turbocharged 2-liter engine. Afterundergoing some preliminary tests during the 2007 season, the team and its cars made their fulldebut in 2008. Driven by Toni Gardemeister and Per-Gunnar Andersson, the SX4 finished in thepoints during its first race, the Monte Carlo Rally.

About the Model- Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength. These parts are now also separately molded to enable easier maintenance.- New front and rear uprights are also made from durable fiberglass-reinforced resin.- Improved steering linkage design features TA05 steering posts for sharper steering response.- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level race- spec machines.- Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.- New-mold SX4 WRC body made from lightweight polycarbonate material.- Injection-molded side mirrors and rear wing provide crisp detail.- Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and rear light cases.- 2-channel R/C system, 7.2V battery and charger separately required.- Wide variety of Option Parts are separately available to customize your machine.


58409 1/10 R/C ARTA Garaiya (TB-03)

Verwacht 2008 Q3

Image shows drawing

About the ARTA GaraiyaAutobacs Racing Team Aguri re-entered their modified ASL Garaiya in the GT300 class of the2007 Japan Super GT series to commemorate the 10th anniversary of ARTA. With the veterandriver duo of Morio Nitta and Shinichi Takagi at the wheel, the team showed early promise totake 1st place at Round 3 Fuji Speedway, and went on to finish a respectable 4th place in theseason’s overall standings.

About the Model- The new TB-03 chassis is totally improved upon its predecessor the TB-02.- Bathtub frame comes with a motor cooling duct to improve heat dissipation for better performance.- In-board Front Suspension system features horizontally-mounted front dampers to enable a low-nose profile to mount the new-mold aerodynamic polycarbonate body shell.- The body shell is also compatible with TA05-IFS chassis- Newly-designed one-piece aluminum motor mount makes changing and adjusting gears a breeze.- Equipped with front and rear ball differentials for greater power transmission efficiency.- Race-proven reversible short suspension and TRF416 front and rear knuckles.- Includes body, wheels, tires, and Type 540 motor.- ESC, 2-channel R/C system, 7.2V battery and charger separately required.


58410 1/10 R/C Volkswagen Golf GTI Cup Car (TT-01 Type E)

Verwacht 2008 Q3

About the Golf GTI Cup CarThe Golf GTI Cup is a one-make race series organized by Volkswagen Group Japan. The racesfeature Golf GTI cars which have been modified and outfitted for track use. These modificationsinclude 4-point seatbelts, roll cage, and DSG (Direct Shift Gearbox). Owners also apply colorfulliveries to set their car apart from the others. The series has 5 races throughout Japan, andencourages both seasoned racers and amateurs to go out and participate.

About the Model- Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength. These parts are now also separately molded to enable easier maintenance.- New front and rear uprights are also made from durable fiberglass-reinforced resin.- Improved steering linkage design features TA05 steering posts for sharper steering response.- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level race- spec machines.- Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.- New-mold Golf GTI body made from lightweight polycarbonate material.- Stylish silver 10-spoke wheels and sticker set to replicate actual car’s markings included.- Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and rear light cases.- ESC, 2-channel R/C system, 7.2V battery and charger separately required.- Wide variety of Option Parts are separately available to customize your machine.

Image shows drawing


58411 1/10 R/C Nissan GT-R (TT-01 Type E)

Verwacht 2008 Q3

About the GT-RAfter starting life as a concept car in 2001 and moving to the prototype stage in 2005, the worldwas treated to the debut of the Nissan GT-R at the 2007 Tokyo Motor Show. Powered by a3,799cc twin turbo DOHC V6 engine producing 480hp, this new GT-R has become the fastestproduction car to lap Germany’s famous Nurburgring. Yet this high-performance super car isalso comfortable for everyday driving situations and meets tougher environmental regulationsas well in order to live up to Nissan’s label of “multi-performance” super car.

About the Model- Newly evolved TT-01 type E chassis features brand new A Parts and D Parts.- Damper Stay and Gear Case parts are made from fiberglass-reinforced resin for greater strength. These parts are now also separately molded to enable easier maintenance.- New front and rear uprights are also made from durable fiberglass-reinforced resin.- Improved steering linkage design features TA05 steering posts for sharper steering response.- Completely new upper deck enhances chassis rigidity and mimics Tamiya’s high-level race- spec machines.- Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.- New-mold GT-R body made from lightweight polycarbonate material.- Injection-molded side mirrors and rear wing provide crisp detail. New wheels feature +2 offset.- Includes ESC (TEU-101BK), Type 540 motor, and LEDs to install in the metal-plated front and rear light cases.- ESC, 2-channel R/C system, 7.2V battery and charger separately required.- Wide variety of Option Parts are separately available to customize your machine.

Image shows drawing


42107 1/10 R/C TB Evolution 5 MS Chassis Kit

Verwacht 2008 Q3

Images show prototype

The ultimate shaft-driven 4WD chassis in the TB Evolution Series, the TB Evolution 5, has beenfurther tuned and refined to become this limited edition TB Evolution 5 MS.

About the Model- Race-spec 1/10 R/C TB Evolution 5 MS chassis kit.- Features TRF416-style steering and suspension systems.- New motor layout sees motor mounted further forward to improve handling characteristics and make spur gear changes much easier.- Durable aluminum diff. joint is capable of harnessing the power from even high-output motors.- Protective covers over the swing shaft connection ensures smooth and unobstructed operation.- Front part of lower deck is made from durable nylon material and is mounted with a small-size bumper that reduces interference with road in case of a roll.- Reversible-type suspension features short-span suspension arms, enabling minute settings adjustments.- 2-channel R/C system with ESC, motor, body, tires, battery pack and charger all separately required.

TRF SERIES

The following TRF series parts have been produced with your vehicle in mind. Not only will theyadd to your vehicles performance, they will also increase your driving pleasure.


42116 3x10mm Blue Titanium Turn Buckle Shaft (2pcs.)

Verwacht 2008 Q3


Verwacht 2008 Q3


Verwacht 2008 Q3


Verwacht 2008 Q3


Verwacht 2008 Q3


Verwacht 2008 Q3

42122 Wrench for Blue Titanium Turn Buckle Shaft

Verwacht 2008 Q3


42123 High Performance ESC Volac MS C3

Verwacht 2008 Q3

Images show prototype

The Volac ESC Volac MS was released in 2004 was well-liked by the R/C racing crowd thanksto its high-performance and user-friendliness. A new model of this ESC is now being releasedwith quite a few improvements.

About the Volac MS C3- Features the same physical size as the Volac MS, but is 18.8g lighter for greater weight savings.- Comes in a stunning metallic blue color with a special plate designed by TRF driver Satoshi Maezumi.- Compatible with frequencies from 900Hz to 12kHz (KO Propo setting adapter may be needed).- ESC is programmed with input from TRF driver Satoshi Maezumi for a special default setting.


49496 1/10 R/C 4WD High Performance Off Road Racer DF-03MS

Verwacht 2008 Q3

LIMITED EDITION

The mid-range 4WD off-road platform DF-03 now gets the full race-spec treatment to bring outits hidden potential. This limited edition buggy features a chassis that is loaded with performance-enhancing parts and a Dark Impact body shell with special markings designed by TRF driverSatoshi Maezumi.

About the Model- DF-03 chassis kit is loaded with the following parts to boost performance:

53791 DF-02 Assembly Universal Shaft53924 DF-03 Heat Sink Bar Set53925 DF-03 Slipper Clutch Set53926 DF-03 Aluminum Damper Set53931 DF-03 Center One-Way Set53940 DF-03 Hard Turnbuckle Shaft Set53941 DF-03 Aluminum Turnbuckle Steering Rod53948 DF-03 Aluminum One-Piece Propeller Cup Joint53949 DF-03 Lightweight Battery Stopper Pin53984 Buggy Racing Wing51000 Hi-Torque Servo Saver (Black)

- Front and rear white-colored large dish wheels and white damper springs match the special TRF Satoshi Maezumi color scheme.- 2-channel R/C system with ESC, motor, tires, 7.2V battery and charger are separately required.

Image shows prototype with markings

LIMITED EDITION RADIO CONTROL VEHICLES


55101 Power Champ FD

Verwacht 2008 Q3

At intense Mini 4WD competitions, the demands on batteries are much, requiring a batterythat can keep up with the pace. The new Powerchamp battery has the high power which isperfect in coping with the demands of the ever increasingly faster Mini 4WD races. The FDlogo is a metallic red color which stands out showing that when you run your Mini 4WD with aPowerchamp battery, your vehicle will run red hot!

Please note:- There are two batteries in each blister pack.- There are 100 units in a carton.- Dry cell alkaline R6/AA/UM3 batteries.



74080 Craft Tweezers

Verwacht 2008 Q3

- These are craft tweezers that are most suitable for papercraft work.- The foremost part has an original Tamiya design.- The design helps improve effectiveness in gluing and the bending of the paper, as well as the drying process.- It can also be used with the application of stickers and decals.- Length: 140mm, has a SUS410 stainless hairline finish.

About the Craft Tweezers


TOOLS, PAINTS, & FINISHING MATERIALS


74532 Tamiya Spray Work HG Airbrush III

Verwacht 2008 Q3

This HG airbrush has a new 0.3mm nozzle and also comes with a newly designed trigger mak-ing it a more comfortable, easy to use tool. The airbrush uses a double action which allows forbetter control of the spray painting action making for a more beautiful paint job. This is a musthave tool for all modeling enthusiasts.

Image shows drawing


87098 Tamiya Weathering Master E Set Dry Brush Effect, Yellow, Grey, Green.

Verwacht 2008 Q3

This set is an essential tool for adding the final touches of detail for combat vehicles such astanks. It is easy to apply and comes in three colors yellow, grey and green which will add to themodeling pleasure. The yellow can be used with WWII German vehicles instead of dark yellow.The grey comes in handy with German-grey colored vehicles and Japanese warships. And fi-nally, green finishes off the set which is great for Allied forces vehicles which often used olive-drab and dark green colors.

Image shows drawing


89912 Iridescent Blue / Green

Verwacht 2008 Q3

When viewing your model from different angles, you will notice different colors thanks to theiridescent characteristics, and through special painting techniques you will be able to producerealistic aging effects. Using the metallic like blue and green colors on R/C cars will definitely beeye-catching at the track.

Image shows drawing

LIMITED EDITION


ROBOCRAFT SERIES71121 2-Legged Walking Robot w/Wind-Up Generator

Verwacht 2008 Q4

71122 4-Legged Walking Robot w/Wind-Up Generator

Verwacht 2008 Q4

71123 Sumo Wrestler Robot w/Wind-Up Generator (Tentative)

Verwacht 2008 Q4

Tamiya presents its next Robocraft Series items, the 2-legged and 4-legged walking robot andthe Wrestling robot. These robots are powered by a hand held wind-up generator which powersthe moving parts making these robots walk. Legs and body parts employ transparent-coloredparts, giving a cool look. Assembly is very simple with use of screws and snap-lock parts.


84023 1/10 R/C M-03R Chassis Kit (Blue Plated Version)

Verwacht 2008 Q3

LIMITED EDITION

This M-03R Chassis is blue plated and it is possible to choose from three wheelbase types foryour vehicle. Has 60D radial tires, black Suzuki Swift wheels, front and rear aluminum uprights(M-03R), Aluminum Servo Mount (M-03R), Clear blue CVA Super Mini Dampers (M-03R), spe-cial all white TRF Damper shot soft to hard springs (M-03R), and a blue anodized aluminumheat sink.


51337 1/10 R/C Suzuki SX4 WRC Body Parts Set

Verwacht 2008 Q3

This set includes an accurately reproduced poly carbonate body for the Suzuki SX4 WRCRacing car. Comes with a light case for seperately available front and rear LED lights. Themost light connections: 5mm LED (four lights), 3mm LED (six lights).

About the Model- The body is polycarbonate. t=1.0mm no holes- H/J parts (mirror/light case): ABS Yellow light case, one side is plated- Comes with sticker and masking seal and metal fittings.- Can be used with the excellent TT-01 chassis. (It meets the short wheel base specifications)

No picture available

SPARE PARTS FOR RADIO CONTROL VEHICLES


51339 1/10 Volkswagen Golf GTI Cup Car Body Parts Set

Verwacht 2008 Q3

This set includes an accurately reproduced poly carbonate body for the Volkswagen Golf GTICup Car. Comes with a light case for seperately available front and rear LED lights. Themost light connections available with the set: 5mm LED (four lights), 3mm LED (four lights).

About the Model- The body is polycarbonate. t=1.0mm no holes- H/J parts (mirror/light case): ABS Yellow silver light case, one side is plated- Comes with sticker and masking seal and metal fittings.- Can be used with the excellent TT-01 chassis. (It meets the short wheel base specifications)



51340 1/10 R/C Nissan GT-R Body Parts Set

Verwacht 2008 Q3

This set includes an accurately reproduced poly carbonate body for the Nissan GT-R . Comeswith a light case for possible front and rear LED lights. The most light connections availablewith the set: 5mm LED (four lights), 3mm LED (four lights).

About the Model- The body is polycarbonate. t=1.0mm no holes- H/J parts (mirror/light case): ABS Yellow silver light case, one side is plated- Comes with sticker and masking seal and metal fittings.- Can be used with the excellent TT-01 chassis. (It meets the short wheel base specifications)



xxxxx1/10 R/C F103RM (Type T) Body Parts Set (Tentative)

Verwacht 2008 Q3

No image available

This is the new spare body great for F1 R/C cars having its own unique body design. Thisspare body is designed for those who would like to express their individuality through theirR/C car, and for those who believe that they can do a better job at designing cars than thepros! When you have produced your own customized body, not only you will be the envy ofyour friends, but your car will definately turn heads at the race course.

LIMITED EDITION


54037 DB01 Aluminum Suspension Mount (Front)

Verwacht 2008 Q3

54032 Anaerobic Gel Thread Lock

Verwacht 2008 Q3

OPTION PARTS FOR RADIO CONTROL VEHICLESNew Option Parts will soon be available to reinforce your belt-driven 4WD DB01 machine andmake it even more indestructible.

Tamiya is now releasing a new easiy applied screw lock gel for helping in the prevention oflooseness in metal parts in R/C vehicles. It can also be applied on chassis’ as well engines.

54038 DB01 Aluminum Suspension Mount (Rear)

Verwacht 2008 Q3

54039 DB01 Aluminum Suspension Block (2pcs.)

Verwacht 2008 Q3

54040 DB01 Motor Heat Sink

Verwacht 2008 Q3

54041 DB01 Carbon Fiber-Reinforced Chassis

Verwacht 2008 Q3


54045 TA05-IFS R Drive Belt (342mm)

Verwacht 2008 Q3

54050 TA05-IFS R 18T Center One-Way Set

Verwacht 2008 Q3

New drive belt is released in conjunction with TA05-IFS R Chassis Kit and can used as a sparebelt for its drivetrain (37T-18T-37T pulleys). It can also be used wtih TA05 series drivetrain (36T-16T-36T pulleys) if modifications indicated in the TA05-IFS R instruction manual are followedand if ITEM 53988 Ball Differential Pulley (37T) and either ITEM 53989 Center Pulley (18T) orITEM 54050 TA05-IFS R 18T Center One-Way are installed.

In conjunction with the release of the TA05-IFS R Chassis Kit, this new Option Part will also beavailabe to provide improved power transmission efficiency for faster cornering speeds.

54051 TRF501X/DB01 18T Center One-Way Set

Verwacht 2008 Q3

54052 TB-03 Aluminum Universal Propeller Shaft Set

Verwacht 2008 Q3

54053 TB-03 Aluminum Propeller Joint Set (Rear)

Verwacht 2008 Q3


54055 TB-03 04 Spur Gear (96T)

Verwacht 2008 Q3

54056 TB-03 Aluminum Dif Joint Set

Verwacht 2008 Q3

54057 TB-03 Front One Way Unit

Verwacht 2008 Q3

54054 TB-03 Aluminum Motor Adaptor

Verwacht 2008 Q3

54058 TT-01E Aluminum Steering Set

Verwacht 2008 Q3

54059 TT-01E Front Carbon Damper Stay

Verwacht 2008 Q3


This is a 3mm rear carbon damper stay for the TT-01E chassis. Also included is a damperstay mount x 1(54059), body mount mold x 1 (sp.984), 3x12mm metal screws, 5 ball connec-tor nuts, and instruction manual.

54060 TT-01E Rear Carbon Damper Stay

Verwacht 2008 Q3


LIMITED EDITION PARTS FOR RADIO CONTROL VEHICLES49382 On Road Tune Hard Spring Set (White)

Verwacht 2008 Q3

49389 On Road Tune Hard Spring Set (Milky Blue)

Verwacht 2008 Q3

49425 TA05 Aluminum Differential Joint (Blue)

Verwacht 2008 Q3

49426 TRF415 Aluminum Differential Joint Set (Blue)

Verwacht 2008 Q3

49462 TA05 Urethane Bumper (Black)

Verwacht 2008 Q3

49463 TRF415 Urethane Bumper (Black)

Verwacht 2008 Q3

49466 M-03 Blue Plate Frame Set

Verwacht 2008 Q3

LIMITED EDITION

LIMITED EDITION

LIMITED EDITION

LIMITED EDITION

LIMITED EDITION

LIMITED EDITION

LIMITED EDITION


49494 TB Evo V MS Screw Set (Titanium & Aluminum)

Verwacht 2008 Q3

49495 TRF416 2.5mm Lower Deck

Verwacht 2008 Q3

LIMITED EDITION


The titanium screws are to be used for the lower part of the chassis providing extra strength. Thealuminum screws are for the upper deck, improving the vehicle’s center of gravity and weightbalance. The blue dress-up screws are also effective in this role. It is also possible to use thestandard kit screws for the installation of the motor, kingpin, and the front body mount.

This low carbon graphite deck now comes 2.5mm thick compared to previous 2.25mm decks.The deck’s rigidity has improved, making it excellent for high speed racing and high grippingtracks. Comes equipped with the motor cooling hole and an air duct.

49471 TA05 Wide Pitch Front One-Way Pulley (36T Size/Black)

Verwacht 2008 Q3

LIMITED EDITION

49472 TA05 Wide Pitch Differential Pulley (36T Size/Black)

Verwacht 2008 Q3

LIMITED EDITION


49499 TB-03 Titanium Screw Set

Verwacht 2008 Q3

LIMITED EDITION

These are parts for classic indispensable lightweight competition vehicles. The followingparts are included in the set:

-3x6mm Titanium screws (1 pc.) -3x5mm Titanium screws (4 pcs.)-3x8mm Titanium screws (7 pcs.) -3x6mm Titanium screws (6 pcs.)-3x10mm Titanium screws (16 pcs.) -3x8mm Titanium screws (27 pcs.)-3x12mm Titanium screws (2 pcs.) -3x10mm Titanium screws (11 pcs.)

-3x12mm Titanium screws (8 pcs.)-3x16mm Titanium screws (1 pc.)-3x23mm Titanium screws (2 pcs.)

No image available


84005 TA05 -IFS Aluminum Rear Upper Light (0 degrees/black)

Verwacht 2008 Q3

LIMITED EDITION

84006 TA05 Alluminum Differential Joint (black)

Verwacht 2008 Q3

LIMITED EDITION

84003 TA05 Aluminum Motor Mount (black)

Verwacht 2008 Q3

LIMITED EDITION

84004 TA05 Aluminum Racing Steer Set (black)

Verwacht 2008 Q3

LIMITED EDITION

84000 TA05 Center One-way Set (black)

Verwacht 2008 Q3

LIMITED EDITION

84001 TA05 Aluminum Motor Heat Sink (black)

Verwacht 2008 Q3

LIMITED EDITION

84002 TA05 Aluminum Center Plate (black)

Verwacht 2008 Q3

LIMITED EDITION


84012 Battery Plate Aluminum Mount Screws (black)

Verwacht 2008 Q3

LIMITED EDITION

84013 5mm Aluminum Short Ball Nut (black)

Verwacht 2008 Q3

LIMITED EDITION

84010 TA05 Lightweight Aluminum Servo Stay (black)

Verwacht 2008 Q3

LIMITED EDITION

84011 Aluminum Wheel Hub Clamp (5mm thick/black)

Verwacht 2008 Q3

LIMITED EDITION

84007 46mm Lightweight Steering Shaft (black)

Verwacht 2008 Q3

LIMITED EDITION

84008 TRF Special Damper (Hard coat/black)

Verwacht 2008 Q3

LIMITED EDITION

84009Turbo Down Retainer (black)

Verwacht 2008 Q3

LIMITED EDITION


84020 3x18mm Aluminum Turn Buckle Shaft (black)

Verwacht 2008 Q3

LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

84017 Aluminum Stabilizer End (black)

Verwacht 2008 Q3

LIMITED EDITION

84018 Carbon D Stay Setting Spacer (black)

Verwacht 2008 Q3

LIMITED EDITION

84014 5x5mm Aluminum Ball Connector (black)

Verwacht 2008 Q3

LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

84016 Stabilizer Rod Stabilizer Bar (black)

Verwacht 2008 Q3

LIMITED EDITION


84025 TRF 416 Lower Deck for Stick Type Battery

Verwacht 2008 Q3

LIMITED EDITION

It is possible to load a stick type battery pack for Tamiya GP races. As for the low deck, itsthickness has increased from t=2.25 to t=2.5 which improves its strength. In the set there is : 1xCarbon Low Deck (t=2.5), 1xCarbon Battery Plate, 1xStick Type Cast (Porsche 934 J parts),2xBlue Aluminum BM screws, and installation screws.


Verwacht 2008 Q3LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

Please note that this product is for Japan release only. If a customer wishes to have such aLower Deck please refer them to the very similar TRF416 2.5mm Lower Deck (49495).


84027 Super Clod Buster Axle Parts Set

Verwacht 2008 Q3

LIMITED EDITION

LIMITED EDITION

This is the axle parts for the Super Clod Buster Monster Truck. This axle parts set allows themodeller to get to know his vehicle’s mechanics in more detail and allow a more personalizedcustomization.

This is an axle parts set which is used in the TLT-1 Rock Buster and Max Climber. This axleparts set allows the modeller to get to know his vehicle’s mechanics in more detail and allow amore personalized customization.

84028 TLT-1 Axle Set

Verwacht 2008 Q3

84026 F-350 Axle Parts Set

Verwacht 2008 Q3

LIMITED EDITION

These are the axle parts which are used in Tamiya’s F-350 and Toyota Hilux High-LIft. This axleparts set allows the modeller to get to know his vehicle’s mechanics in more detail and allow amore personalized customization.





49499 TB-03 Titanium Screw Set

Verwacht 2008 Q3

LIMITED EDITION

These are parts for classic indispensable lightweight competition vehicles. The followingparts are included in the set:

-3x6mm Titanium screws (1 pc.) -3x5mm Titanium screws (4 pcs.)-3x8mm Titanium screws (7 pcs.) -3x6mm Titanium screws (6 pcs.)-3x10mm Titanium screws (16 pcs.) -3x8mm Titanium screws (27 pcs.)-3x12mm Titanium screws (2 pcs.) -3x10mm Titanium screws (11 pcs.)

-3x12mm Titanium screws (8 pcs.)-3x16mm Titanium screws (1 pc.)-3x23mm Titanium screws (2 pcs.)

No image available


84005 TA05 -IFS Aluminum Rear Upper Light (0 degrees/black)

Verwacht 2008 Q3

LIMITED EDITION

84006 TA05 Alluminum Differential Joint (black)

Verwacht 2008 Q3

LIMITED EDITION

84003 TA05 Aluminum Motor Mount (black)

Verwacht 2008 Q3

LIMITED EDITION

84004 TA05 Aluminum Racing Steer Set (black)

Verwacht 2008 Q3

LIMITED EDITION

84000 TA05 Center One-way Set (black)

Verwacht 2008 Q3

LIMITED EDITION

84001 TA05 Aluminum Motor Heat Sink (black)

Verwacht 2008 Q3

LIMITED EDITION

84002 TA05 Aluminum Center Plate (black)

Verwacht 2008 Q3

LIMITED EDITION


84012 Battery Plate Aluminum Mount Screws (black)

Verwacht 2008 Q3

LIMITED EDITION

84013 5mm Aluminum Short Ball Nut (black)

Verwacht 2008 Q3

LIMITED EDITION

84010 TA05 Lightweight Aluminum Servo Stay (black)

Verwacht 2008 Q3

LIMITED EDITION

84011 Aluminum Wheel Hub Clamp (5mm thick/black)

Verwacht 2008 Q3

LIMITED EDITION

84007 46mm Lightweight Steering Shaft (black)

Verwacht 2008 Q3

LIMITED EDITION

84008 TRF Special Damper (Hard coat/black)

Verwacht 2008 Q3

LIMITED EDITION

84009Turbo Down Retainer (black)

Verwacht 2008 Q3

LIMITED EDITION



Verwacht 2008 Q3

LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

84017 Aluminum Stabilizer End (black)

Verwacht 2008 Q3

LIMITED EDITION

84018 Carbon D Stay Setting Spacer (black)

Verwacht 2008 Q3

LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

84016 Stabilizer Rod Stabilizer Bar (black)

Verwacht 2008 Q3

LIMITED EDITION


84025 TRF 416 Lower Deck for Stick Type Battery

Verwacht 2008 Q3

LIMITED EDITION

It is possible to load a stick type battery pack for Tamiya GP races. As for the low deck, itsthickness has increased from t=2.25 to t=2.5 which improves its strength. In the set there is : 1xCarbon Low Deck (t=2.5), 1xCarbon Battery Plate, 1xStick Type Cast (Porsche 934 J parts),2xBlue Aluminum BM screws, and installation screws.


Verwacht 2008 Q3LIMITED EDITION


Verwacht 2008 Q3

LIMITED EDITION

Please note that this product is for Japan release only. If a customer wishes to have such aLower Deck please refer them to the very similar TRF416 2.5mm Lower Deck (49495).


84027 Super Clod Buster Axle Parts Set

Verwacht 2008 Q3

LIMITED EDITION

LIMITED EDITION

This is the axle parts for the Super Clod Buster Monster Truck. This axle parts set allows themodeller to get to know his vehicle’s mechanics in more detail and allow a more personalizedcustomization.

This is an axle parts set which is used in the TLT-1 Rock Buster and Max Climber. This axleparts set allows the modeller to get to know his vehicle’s mechanics in more detail and allow amore personalized customization.

84028 TLT-1 Axle Set

Verwacht 2008 Q3

84026 F-350 Axle Parts Set

Verwacht 2008 Q3

LIMITED EDITION

These are the axle parts which are used in Tamiya’s F-350 and Toyota Hilux High-LIft. This axleparts set allows the modeller to get to know his vehicle’s mechanics in more detail and allow amore personalized customization.





Table of ContentsThe items in this section were introduced in earlier Coming Soon Files and we have al-ready taken your intial orders. As they will also be on public display at Tamiya Fair, Wewould like to extend to you an opportunity to submit additional orders.

14111 Kawasaki ZZR 1400

Verwacht 2008 Q3

12622 1/350 Crew Set (144 Pcs)

Verwacht 2008 Q3

60401 1/100 Space Shuttle Orbiter

Verwacht 2008 Q2 / reeds leverbaar

56709 1/12 TamTech Gear Porsche 935 “Martini”

Verwacht 2008 Q3

23211 Ferrari GTO (Semi Assembled Premium Model)

Verwacht 2008 Q3


Highly Confidential Items Please note that like the previous items in this Coming Soon, the following items are

also highly confidential items and are being planned for future announcement and

are also subject to change and approval. Therefore we ask that you keep these items

confidential until further notice.

We thank you for your assistance with this.

International Division

Tamiya Inc.


49497 1/8 Glow-Engine R/C 4x4 Racing Truck TRF801XT

Verwacht 2008 Q4

No image available

This is an assembly kit for a 1/8 engine truggy chassis. The highly efficient drive systemcomes from the well designed placement of the propeller shaft. This chassis has plenty tooffer and is great for high end racing.

About the Model- Highly rigid 3mm A7075 duralumin chassis.- Aluminum Front/Rear shock tower, Front knuckle, and engine mount.- Carbon upper deck, center upper deck and servo tray.- Fully sealed box for R/C system.- Equipped with 4-bevel differential gearboxes for the front, rear, and center.- Uses spiral bevel gears for the front and rear.- Uses a universal joint for the front and rear drive shaft and the propeller shaft.- 3 piece centrifuge clutch is included.- Equipped with large aluminum dampers and shaft bots are included.- Uses a 17mm hex wheel hub.- Equipped with a standard stabilizer.- Engine (0.21-0.28cc class), muffler & manifold, tires & wheels (inner sponge), and R/C unit are sold separately.- Air cleaner included.

LIMITED EDITION

Shizuoka Hobby Show 2008 Table of Contents - Wheels … · Shizuoka Hobby Show 2008 Table of Contents ... 48206 1/35 R/C German Panzerkampfwagen IV Ausf.J 4950344482061 ... (Type

Documents