CABLE D-RING SHADE SAIL HARDWARE Technical Data Casting material Surface treatment Breaking load Cable D-Ring are made from cast 316 grade stainless steel. Product Code cabledring5 cabledring8 cabledring10 Suits Wire (mm) 5 8 10 D (mm) 6 8 10 D1 (mm) 9 13 15 A (mm) 50 50 53 L (mm) 55 62 68 H (mm) 8 13 15 Breaking Load (kgs) 2,600 6,000 6,000 D - RING Technical Data Forging material Surface treatment Breaking load Product Code Dring640 Dring850 Size (mm) 6*40 8*50 C (mm) 39 51 A (mm) 6 8 B (mm) 34 43 Breaking Load (kgs) 1,800 2,800 A C B : Stainless Steel AISI304 - DIN 1.4301 : “ E.P. ” (Electro polish) : Standard safety factor for working load is 1/4 of “ T.D.L. ” (Tested deformation load) : Stainless Steel AIS316 – DIN 1.4401 : “ E.P. ” (Electro polish) : Standard safety factor for working load is 1/4 of “T.D.L.” (Tested deformation load) Field of Application Cable D-Ring are designed to support wire rope on shade steel corners. Field of Application D-rings are designed for assembly of shade sail corners using webbing. Rings are welded using the TIG Argon welding process. TURNBUCKLE JAW AND JAW Technical Data Forging material Frame Surface treatment Breaking load Product Code Turnbuckjaw8 Turnbuckjaw10 Turnbuckjaw12 Size (mm) 8 10 12 L (mm) 160 200 245 L1 (mm) 105 125 150 M (mm) M8 M10 M12 Breaking Load (kgs) 2,200 3,450 5,000 : Stainless Steel AISI316 - DIN 1.4401 : Casting : “ E.P. ” (Electro polish) : Standard safety factor for working load is 1/4 of “ T.D.L. ” (Tested deformation load) Field of Application Jaw to jaw turnbuckles with nut provide an extra locking function after the fitttings are securely tightened.
2
Embed
SHADE SAIL HARDWARE - Tensile Shade Structures · SHADE SAIL HARDWARE Technical Data Casting material Surface treatment Breaking load Cable D-Ring are made from cast 316 grade stainless
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Cable D-Ring are made from cast 316 grade stainless steel.
Product Code
cabledring5
cabledring8
cabledring10
Suits Wire (mm)
5
8
10
D (mm)
6
8
10
D1 (mm)
9
13
15
A (mm)
50
50
53
L (mm)
55
62
68
H (mm)
8
13
15
Breaking Load (kgs)
2,600
6,000
6,000
D - RINGTechnical DataForging materialSurface treatmentBreaking load
Product Code
Dring640
Dring850
Size (mm)
6*40
8*50
C (mm)
39
51
A (mm)
6
8
B (mm)
34
43
Breaking Load (kgs)
1,800
2,800
A
C
B
: Stainless Steel AISI304 - DIN 1.4301: “ E.P. ” (Electro polish): Standard safety factor for working load is 1/4 of “ T.D.L. ” (Tested deformation load)
: Stainless Steel AIS316 – DIN 1.4401: “ E.P. ” (Electro polish): Standard safety factor for working load is 1/4 of “T.D.L.” (Tested deformation load)
Field of ApplicationCable D-Ring are designed to support wire rope on shade steel corners.
Field of ApplicationD-rings are designed for assembly of shade sail corners using webbing. Rings are welded using the TIG Argon welding process.
TURNBUCKLE JAW AND JAWTechnical DataForging materialFrameSurface treatmentBreaking load
Product Code
Turnbuckjaw8
Turnbuckjaw10
Turnbuckjaw12
Size (mm)
8
10
12
L (mm)
160
200
245
L1 (mm)
105
125
150
M (mm)
M8
M10
M12
Breaking Load (kgs)
2,200
3,450
5,000
: Stainless Steel AISI316 - DIN 1.4401: Casting: “ E.P. ” (Electro polish): Standard safety factor for working load is 1/4 of “ T.D.L. ” (Tested deformation load)
Field of ApplicationJaw to jaw turnbuckles with nut provide an extra locking function after the �tttings are securely tightened.
: Stainless Steel AIS1316 - DIN 1.4401: “ E.P. ” (Electro polish): Standard safety factor for working load is 1/4 of “ T.D.L. ” (Tested deformation load)
Field of ApplicationShackle Key is used to tighten Turn Buckles and Nuts during installation.
CARE & MAINTENANCE PROGRAMThe common rule for keeping stainless steel in its original, pristine condition is to “clean it when it’s dirty”. For regular cleaning start with a soft cloth and clean warm water or use ordinary soap or a mild, dilluted detergent or dilluted amonia in warm water; apply with a soft cloth or synthetic sponge. Rinse well, dry with a soft cloth or drip dry.
Occasionally the use of mild household cleaner, a �ne synthetic scourer or a brush with nylon bristles may be used. Regular cleaning will often remove heavy soiling and accumulated staining.
Routine, simple and gentle cleaning
Use only the above mentioned cleaning products
Employ repeated routine cleaning rather than an aggressive single one
Note: Standard safety factor for working load is 1/4 of breaking load.
: Stainless Steel AISI316 – DIN 1.4401: Casting: “E.P.” (Electro polish): Standard safety factor for working load is 1/4 of “T.D.L.” (Tested deformation load)
Field of ApplicationThreaded fork-ends are used for tensioning shade sail ends with additional bene�t of 180º toggle head for ease of installation.