Shell & Tube Heat Exchangers Process Technology DIABON ® Broad Base. Best Solutions.
Shell & Tube Heat Exchangers
Process Technology
DIABON®
Broad Base. Best Solutions.
SGL Group is one of the leading manufacturers of carbon-based products and has the broadest product and technol-ogy portfolio, a global sales network and state-of-the-art production sites in Europe, North America and Asia.
Carbon has unique properties. It is indispensable in the production of steel, aluminum and solar energy systems. Carbon increases the performance of wind turbines and reduces the weight of airplanes, cars and sports equipment.
CCarbon substitutes other materials and contributes to a reduction in CO2 emissions.
Carbon is Future. SGL Group – The Carbon Company.
The Business Unit Process Technology is a premium technology provider for chemical and related industry process systems, equipment and after sales services. Our focus are high-tech materials for demanding chemical applications. With smart and sustainable solutions for an in-creasing number of industry we give proof of our strong innovation culture.
Broad Base
Our range of materials: E graphiteE SiCE PTFEE reactive metalsE steel
Our range of services: E process designE engineeringE project managementE production and assemblyE commissioningE after sales services.
With 9 manufacturing sites in 8 countries and a continually growing worldwide sales and service network, we are always close to our customers.
Process Technology
3
In a business that strongly depends on reliability we never compromise on quality and safety. Our products deliver dependable results; our services are fast and competent. The long-standing loyalty of our customers proves that we keep our promises – on-time, on-spec, on-budget.
Tailor made, innovative solutions and an integrated approach on chemistry, materials, technology and design, ensure outstanding efficiency and improved customer value: higher yields, lower operating cost, lower service and maintenance cost, longer service intervals and less downtimes, and the extended product lifetime sum up to significant lower total cost of ownership and to a higher return on investment for our customers.
In all industries that deal with resource- and energy- consuming processes sustainability is of crucial importance. Based on innovative solutions, more than 60 % of our sales contribute to the saving of resources and energy and to the reduction of greenhouse gases.
Powered by our Broad Base of competencies, products and services, we offer Best Solutions to our customers. For the Business Unit Process Technology, those solutions are characterized by reliability, efficiency and sustainability.
Contents
DIABON Shell and Tube Heat Exchangers 4
Technical Information 6
Design Options 7
Properties and Applications 8
Carbon Fiber-Reinforced DIABON Components 9
Multi-Tube Bundle Heat Exchangers 10
Quality Management and After Sales Service 14
Process Technology – Our Products 15
ReliaBiliTy. effiCienCy. SuSTainaBiliTy.
Best Solutions
E Reliability
E Efficiency
E Sustainability
4
DIABON® Shell and Tube Heat Exchangers at a Glance
Advantages of our shell and tube heat exchangers in DIABON processequipment graphite
� High efficiency� Large heat exchange areas possible
(over 2,000 m2)� Price advantage for medium and large
heat exchange areas� High heat transfer capacity� Abrasive wear protection minimizes erosion� Low pressure drops� All seals are external for ease of inspection� Ease of repair� Excellent drainage of condensate in steam
applications� Complete drainage of product and service side� Wide range of material combinations for shell
and header (FRP, rubber-lined steel, enamel,steel/PTFE)
DIABON® tube bundle
On this basis, DIABON shell and tube heat exchang-ers are used as heaters, coolers, condensers andfalling-film evaporators and absorbers, especiallyin the treatment of:� Hydrochloric acid� Sulfuric acid� Hydrofluoric acid� Phosphoric acid� Chlorinated hydrocarbons� Organic and inorganic media� Waste acids� Combustion gases
Pressures and temperaturesA maximum permissible materialtemperature of 200 °C has beencertified for DIABON NS1 andNS2 tubes by the South GermanTechnical Supervisory Board(TÜV). Moreover, strength certifi-cation up to G32-0-200 (32N/mm2 with 0 ‰ strength de-crease up to 200 °C) can be givenfor the tubes. The standard designallows for optional pressures of upto 6 bar gauge for both serviceand product sides. Special designsfor higher pressures up to 16 bargauge on the service side and upto 12 bar gauge on the productside can be supplied on request.
TrainingServicing of our DIABON shelland tube heat exchangers is sim-ple and can be carried out on siteby your own personnel. On re-quest, we put your technical per-sonnel through our training cour-ses. This enables repairs andoverhauls to be carried out evenmore quickly and economically.In addition, our specialists arealways at your service – whateveryour problem. We also supplyspare parts quickly and easily.
Terms of referenceTo be able to offer the same standards of qualityanywhere in the world, our shell and tube heatexchangers are designed to meet the following in-ternational standards:AD specification GermanyAPAVE FranceASME USABS United KingdomChinese Requirements ChinaISPESL ItalyJIS JapanStoomwezen HollandSVTI Switzerland UDT Poland
Corrosion resistanceThe basic materials for our shelland tube heat exchangers, DIA-BON NS1 and DIABON NS2process equipment graphite, areresistant to virtually all organicand inorganic media. For heatexchange between two corrosivemedia, we supply special designson request with a suitable anti-corrosion lining or coating of thesteel shell (rubber, PTFE, enamel,etc.)
O-ring sealOur long experience has shownthat O-ring seals offer substantialadvantages over stuffing boxpackings:
� Extremely low coefficients of friction
� Low sealing forces required� Universal resistance of
O-ring seals� Ease of adjustment� Ease of replacement� Long service life� Low servicing cost
5
Shell and tube heat exchanger with DIABON® NS1 tubes
Tube type 0
Tube type 1
Tube type 2
Tube type 3
Tube length
Tube bundles and headers
Shell and flanges
Acceptance inspection
Design pressure
Design temperature
Tubes
Material
Others
1 bis 9 meter (standard)
DIABON NS1 / NS2 / HF1 / HF2
DIN standard steel, P 265 GH
CE, TÜV and other authorized test institutes
-1 / 6 bar gauge (standard)
180 °C (standard)
15
22
25
37
26
32
37
50
33
39
44
57
t [mm]d1 [mm] d2 [mm]
DIABON shell and tube heat exchangersare constructed from the following com-ponents:
� Two tube sheets with or without carbon fiber reinforcement – one fixed and the other floating, relative to the shell
� Baffle cages with DIABON baffles � Headers made from DIABON NS1/ NS2
graphite or other materials. Depending on theapplication, the header in contact with thefloating tube sheet is braced against the tubesheet by a dual clamping tie rod system
� Shell made from steel, with anti-corrosion lining on request, or from other materials
� Partition plates in the headers allow several passes through the tube bundle, when required in the process
Technical InformationDIABON® Shell and Tube Heat Exchangers
6
Technical specification
DIABON® tube sheet with wear sleeves
7
Options for Various Designs
Cooled DIABON®
header for high gas inlet temperatures
Falling-filmDIABON® header
Top header with laterial nozzle and
removable top cover
Extended DIABON®
bottom header for separating gases
and liquids
Conical steel bottom header withcorrosion-resistant
lining
Steel shell with 360° steam distributor
Steel shell with conical steam inlet nozzle
Steel shell withsteam inlet distributor
Standard steel shell
8
Properties and Applications of DIABON® Graphite Brands
DIABON® NS1
PropertiesStandard material for a widerange of applications in chemi-cal technology, environmentalprotection and similar industries.DIABON NS1 is an impervious,synthetic resin-impregnated pro-cess equipment graphite with ahighly homogeneous materialstructure. This results in excellentcorrosion resistance and thermalstability. The maximum permissi-ble material temperature underpermanent load is 200 °C.
ApplicationsStandard material for the pro-duction of heat exchangers andfor all pressure- and temperature-stressed components.
DIABON® NS2
PropertiesGraphite material for superiordemands. This graphite brandis distinguished by its lower porevolume combined with reducedpore size and greater mechani-cal strength. The maximum per-missible material temperature is200 °C.
ApplicationsDIABON NS2 is suitable forheat exchanger tube sheets andtubes, if these are subjected toelevated mechanical stressand/or extremely corrosivemedia and solvents.
Micrograph of DIABON® NS1 Micrograph of DIABON® NS2
Properties of graphite tubes with carbon fiber reinforcement
� Increased bursting pressureThe tube becomes more resistant to steam hammerand service pressures above the permitted limit, itsbursting pressure at room temperature being raisedto 130 to 140 % of that of a non-reinforced tube,depending on the tube dimensions.
9
Carbon Fiber-Reinforced Components for Increased Safety
In developing the carbon fiber reinforcement of components (DIA-BON HF), SGL Group has found a way to increase the operationalreliability of DIABON graphite components appreciably and expandtheir range of application under high-stress conditions. The fiber rein-forcement is used for tube sheets, headers and column sections andespecially for tubes.
Comparison of tube properties
Flexural strength, longitudinal
Bursting pressure at 20 °C
Bursting pressure at 50 °C
Resistance to pressure surges
Leakage pressure2) 5)
Thermal conductivity
Maximum material temperature4)
N/mm2
bar
bar
relative %
bar gauge
W/(K·m)
°C
>52
110
120
250
2-5
50 3)
200
>52
80
75
100
0
>60
200
1) DIABON® tube reinforcedwith SIGRAFIL® HF fibers
2) on a cracked tube underinternal pressure from water
3) effective value, calculated from the tube’sheat transfer capacity
4) depends on service medium
5) pressure up to which no appreciable loss of medium occurs from the cracked tube under brief pressure surges
DIABON NS1Unit DIABON HF1 1)
� Resistance of a cracked tube to leakageShould a longitudinal crack occur in a DIABON HFtube as a result of overstressing, the tube will notallow any major leakage up to a differential pres-sure of some 2 to 5 bar. In all instances, the rein-forcement prevents any spalling from the tube anda consequent escape of product in large quantities. Usually theequipment can continue in operation without interruption until the nextplanned shutdown.
DIABON® HF tubes
Carbon fiber-reinforced tube sheet
Multi-Tube Bundle Heat Exchangers made from DIABON® Process Equipment Graphite
A new generation of heat exchangersUnlike conventional products, our DIABON multi-tube bundle heat exchangers feature an exchangesurface area distributed over several identical smalltube bundles instead of a single large bundle.
Separate graphite tube bundles are incorporatedin a shell made from carbon steel. One or more ofthese elements can be integrated in a frame of sup-port plates. The tube bundles are sealed againstboth the steel flanges and headers with O-ring sealsmade from a high-quality sealing material.
The special design features make for a whole range of advantages:
Technical� High performance combined with small heat
exchange area� Savings in heat exchange area of up to 40 %� Modular design� Multi-mode operation in a single unit� Flexibility in use� Connection scheme adjustable to requirements� Stress-free installation of tube bundles
10
DIABON® bundles of a multi-tube bundle heat exchanger
The special design of multi-tube bundle heatexchangers allows single or multiple counter-currentflow, or several different applications in a singleunit, e.g. in
� condensation� residual gas and condensate sub-cooling
using different cooling media for the purpose
Design advantages� Design ideally matched to graphite material
– sliding seal to compensate for thermal expansion
– minimal axial and radial movement– short tightening distances
� Identical and standardized assemblies(tube bundles, modules, headers, etc.)
� Practical sealing system with reliable O-ringsand sealing cords in high-quality materials
� Flexible design allowing– co-current-flow operation– multi-mode operations
Operational advantages� Vertical and horizontal installation� Antifouling properties� Optimum design for CIP procedures
(Cleaning in Place)
� Meets cGMP requirements (current Good Manufacturing Practices)
� Automatic ventilation and emptying possible
� Long servicing intervals� Ease of handling� Ease of servicing� Maximum operational reliability� Optional inspection glass allows
process control
Cost advantages� Low space requirements due to
compact design� Low capital expenditure� Up to 80 % savings on servicing
and repairs
11
DIABON® multi-tube bundle heat exchangers (2 bundles)
12
DIABON® multi-tube bundle heat exchanger (5 bundles)
Another special advantage of this design is that itallows pure counter-current flow. Compared withstandard equipment, the temperature differentialcan be used to full advantage. Moreover, the de-sign can be individually adapted and optimized foreach application. The resulting savings in heatexchange area can be as much as 40 %.
The equipment design is optimized to allow an idealinlet flow profile for the cylindrical tube sections. Asa result, flow conditions for each tube bundle areidentical, without dead spaces or areas exposed toundercurrents and turbulence. This is why our equip-ment displays excellent antifouling behavior whenused for media with an inherent fouling tendency.
Multi-Tube Bundle Heat Exchangers made from DIABON® Process Equipment Graphite
13
DIABON® multi-tube bundle heat exchanger (3 bundles)
A further advantage of this design is its ease ofhandling. Since the heat exchanger has only a fewcomponents, dismantling is just a short sequenceof operations that can be easily performed by theoperators themselves.
The availability of the equipment can be increasedsignificantly by keeping spare bundles in stock.During heat exchanger cleaning operations, tubebundles can be replaced as required in a minimumof time. This ensures nearly 100 % availability of the
equipment and associated plants.Damaged tube bundles can be re-paired at any time and even repeat-edly, thereby minimizing the cost ofservicing.
Multi-tube bundle heat exchangers are suitablefor a wide range of chemical processes whenused as� Coolers� Heaters� Condensers� Evaporators (forced and natural circulation)� Falling-film evaporators� Integrated equipment for condensing
with simultaneous residual gas cleaning (cold trap)
� Heating and cooling of pickling lines
14
Quality Management
Continuous quality assurance is an integral part of the SGL Group corporate philosophy. Our quality management system is certified in accordance with ISO 9001:2008. In order to guarantee consis tently high quality to our customers, we work according to a key performance indicator orientated quality management system.
Depending on specifications we are able to meet specific requirements like the Pressure Equipment Directive 97/23/EC Annex III, Module H/H1, AD 2000 Merkblatt N2 as well as ASME “U” Stamp, Section VIII, Part UIG.
Quality Management and After Sales Service
After Sales Services – Anytime and Everywhere
We take care of our products during the entire operational lifetime. We aim to provide the best customer service anytime and everywhere.
E Maintenance – genuine spare parts supply, failure analysis, repair, field service
E Fast emergency supportE Start-up assistanceE Consulting for continuous improvement
Our service specialists as well as our service centers work in a global network to support you best.
15
System SolutionsE Syntheses E Distillation and concentrationE PurificationE DilutionE AbsorptionE DesorptionE Thermal destruction and recyclingE Reactors and convertersE Heat storageE ...
After Sales ServicesE MaintenanceE Emergency supportE Start-up assistanceE ConsultingE ...
Equipment SolutionsE Graphite and SiC heat exchangers –
shell & tube, block and plate typeE Columns and internals E VesselsE QuenchersE PumpsE Rupture discsE PTFE piping and bellowsE PTFE hoses E ...
Process Technology Our Products
Regional Sales & Service Center
Central and East Europe
SGL CARBON GmbHWerner-von-Siemens-Strasse 1886405 Meitingen/GermanyPhone +49 8271 83-1564Fax +49 8271 [email protected]
South Europe, Middle East, Africa
SGL CARBON Technic S.A.S.18, Avenue Marcel Cachin38407 Saint Martin d‘Heres/FrancePhone +33 4 7625 9600Fax +33 4 7625 [email protected]
Americas
SGL CARBON Technic, LLC 21945 Drake Road44149 Strongsville, Ohio/USAPhone +1 440 572-3600Fax +1 440 [email protected]
® registered trademarks of SGL CARBON SE 11 2014/0 5NÄ Printed in Germany
The data contained herein represent the current state of our product knowledge and are intended to provide general information on our products and their application spectra. In view of the variety and large number of application possibilities, these data should be regarded merely as general information that gives no guarantee of any specific properties and/or suitability of those products for any particular application. Consequently, when ordering a product, please contact us for specific information on the properties required for the application concerned. On request, our technical service will supply a profile of characteristics for your specific application requirements without delay.
Process Technology
SGL CARBON GmbH
Söhnleinstrasse 865201 Wiesbaden/Germanywww.sgl-processtechnology.com
www.sglgroup.com
Asia, Oceania
SGL CARBON Far East Ltd. Shanghai 1208, Shanghai Oriental Plaza31 Wujiang Road/ChinaPhone +86 21 5211 0333Fax +86 21 5211 0085 [email protected]
India
SGL CARBON India Pvt. Ltd.Plot No. E-100, MIDC RanjangaonVillage: Karegaon, Taluka: ShirurDist. Pune - 412 220/IndiaPhone +91 21 386 [email protected]