7/31/2019 SFS Suruburi Panouri Sandwich Eng
1/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16.
Composite panels Stainless steel self drilling fasteners
6Applications Product code PageComposite panel to steel sub-
structure SXC / SX 6.3`
Composite panel to timbersubstructure
SXCW / SXW 6.5`
Side lap and stitching SL2-S 6.9`
Sealing joint LS, EB, LD 6.11`
7/31/2019 SFS Suruburi Panouri Sandwich Eng
2/26
2
3
4
5
6
7
8
9
0
1
2
3
4
26.
Composite panels
The impressive features of SXC fasteners
Fast and comfortable fixing of sandwich panels.
Fast, efficient assembly usingself-drilling fastening technology
The right fastener for each individualsubstrate
A complete system, featuring theCF 55 setting tool
No need to swap setting tools, asone tool does everything
A depth stop, coupled with sealingwasher and special under-headdesign, avoid dimpling of thesheet
Maximum corrosion resistance
Using state-of-the art sandwich panels
helps you rise to the challenges ofeconomic construction and moderndesign needs. Great demands are alsoplaced on the associated fasteners.
An increasing awareness of environ-
mental and energy issues and ever-tighter fire safety constraints all meanthat the operating environment inindustrial light building is changing.
SFS intec offers the answer with the
SXC family.These parts fulfil a host of require-ments in terms of both installationand long-term behaviour.
Fixing sandwich panels in one
operation
SFS intec SXC self drilling fastenershave been specially developed forthe exacting demands of sandwichsystems. Dynamic stress caused bytemperature changes, foot traffic orwind load simply wont affect fastenerperformance. The supporting thread,thread-free zone and the vital sealingwasher ensure a lifetime seal.
A multiplicity of colours
To meet the requirements of architec-tural aesthetics, SFS intec offers thesefasteners in any colour. The tried andtrusted powder coating accuratelymatches the exact tone of the sand-wich panels being used.
Perfect fixing with the CF 55
installation tool
The front attachment enables simpleinsertion and high-quality fastening.This is particularly useful where extre-mely long fasteners are required.The depth locator also inhibits dimplingof the sheet, as well as faulty seals.
SXC / SX
Stainless steel self drilling fasteners
Composite panel to steel substructure
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
3/26
7/31/2019 SFS Suruburi Panouri Sandwich Eng
4/26
2
3
4
5
6
7
8
9
0
1
2
3
4
46.
Composite panels
SXC / SX
Stainless steel self drilling fasteners
Composite panel to steel substructure
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Colouredfastener
W: Washer material
S Stainless SteelA Aluminium
* Select Washer
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SXC 5- S19- 5,5x 62
Applications Product Approval Type VD KL W* d L D Application range
SFS
T
Stainless steel
DTU 40.35
DTU 40.36
SXC
SXC
SXC
SXC
SXCSXC
SXC
SXC
SXC
SXC
5-
5-
5-
5-
5-5-
5-
5-
5-
5-
S19-
S19-
S19-
S19-
S19-S19-
S19-
S19-
S19-
S19-
5,5x
5,5x
5,5x
5,5x
5,5x5,5x
5,5x
5,5x
5,5x
5,5x
62
82
92
113
133163
193
236
261
286
29 - 36
39 - 56
49 - 66
59 - 87
79 - 10799 - 137
129 - 167
157 - 210
182 - 235
207 - 260
D
VD max. steel5,0 mm
t min. steel:1,5 - 4,0 mm
Stainless steel
DTU 40.35
DTU 40.36
SXC
SXC
SXC
SXC
SXC
SXCSXC
SXC
SXC
SXC
SXC
SXC
14-
14-
14-
14-
14-
14-14-
14-
14-
14-
14-
14-
S19-
S19-
S19-
S19-
S19-
S19-S19-
S19-
S19-
S19-
S19-
S19-
5,5x
5,5x
5,5x
5,5x
5,5x
5,5x5,5x
5,5x
5,5x
5,5x
5,5x
5,5x
71
80
99
118
138
147168
193
218
243
268
293
27 - 38
37 - 48
48 - 67
67 - 86
85 - 106
85 - 116106 - 135
115 - 160
140 - 185
165 - 210
190 - 235
215 - 260
D
VD max. steel14,0 mm
t min. steel:4,0 - 13,0 mm
SFS
S
Stainless steel
DTU 40.35
DTU 40.36
SX
SX
SX
SX
SX
5/
5/
5/
5/
5/
30-
55-
70-
85-
115-
S16-
S16-
S16-
S16-
S16-
5,5x
5,5x
5,5x
5,5x
5,5x
54
80
95
110
140
20 - 30
15 - 55
30 - 70
45 - 85
75 - 115
KL VD max. steel5,0 mm
t min. steel:1,5 mm
t min. alu:2,0 mm
SFS
S
Stainless steel
DTU 40.35
DTU 40.36
SX
SX
SX
SX
14/
14/
14/
14/
20-
38-
58-
75-
S16-
S16-
S16-
S16-
5,5x
5,5x
5,5x
5,5x
48
63
84
100
20
38
58
75
KL VD max. steel14,0 mm
t min. steel:4,0 mm
t min. alu:5,0 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
5/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
56.
Composite panels
SXCW / SXW
Stainless steel self drilling fasteners
Composite panel to timber substructure
Accessories can be found in chapter 12
SXCW / SXW
Technical information
Applications
Fastening composite panels to timber substructure. The unique thread free zone underneath the head ensure the fasteningwill remain sealed during the lifetime of the construction.
Material
Fastener
SXCW / SXWAustenitic stainless steel, gradeAISI 304 (European Standard1.4301)
Washer
S = Stainless steel, grade AISI 304(European Standard 1.4301)A = Aluminiumwith vulcanised EPDM
Drill point
Case hardened, special carbonsteel
Coloured fastener
Coloured fasteners availableColour heads are achievedthrough powder coating
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
Accessories
CF 55
A purpose designed setting toolfor installing long composite panelfasteners. The extension drive barand nosepiece ensure the fastenersare installed correctly.
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
7/31/2019 SFS Suruburi Panouri Sandwich Eng
6/26
2
3
4
5
6
7
8
9
0
1
2
3
4
66.
Composite panels
SXCW / SXW
Stainless steel self drilling fasteners
Composite panel to timber substructure
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Colouredfastener
W: Washer material
S Stainless SteelA Aluminium
* Select Washer
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SXCW- S19- 6,5x 90
Applications Product Approval Type W* d L D Application range
Stainless steel
DTU 40.35
DTU 40.36
SXCW-
SXCW-
SXCW-
SXCW-
SXCW-SXCW-
SXCW-
SXCW-
SXCW-
SXCW-
S19-
S19-
S19-
S19-
S19-S19-
S19-
S19-
S19-
S19-
6,5x
6,5x
6,5x
6,5x
6,5x6,5x
6,5x
6,5x
6,5x
6,5x
90
105
115
135
155185
205
235
275
305
28 - 37
38 - 55
48 - 65
68 - 85
78 - 105100 - 135
120 - 155
150 - 185
185 - 225
215 - 255
D
VD max. steel2,0 mm
SFS
S
Stainless steel SXW-
SXW-
SXW-
S16-
S16-
S16-
6,5x
6,5x
6,5x
54
75
99
VD max. steel2 x 1,0 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
7/26
2
3
4
5
6
7
8
9
0
1
2
3
4
86.
Composite panels
SL2-S
Stainless steel self drilling fasteners
Side lap and stitching
The impressive features of the SL fastener
The secure and speedy way to fix overlapping profiles.
Incorrect insertion virtuallyeliminated
100 % functionality from start tofinish
EPDM washers ensure effectivesealing
Ergonomic working with the CF 400installation tool
Increased productivity thanksto magazine-fed fasteners=Time is money !
The SL self drilling fastener range,
specially developed for fixing onemetal profile to another, offersdecisive advantages in use and inits durability.
Self drilling fasteners for fast,
efficient overlapping
These special fasteners designedspecifically for thin overlapping profilesoffer a range of benefits.The optimum clamping strength resultsfrom careful matching of the tip to thethread diameter. Moreover, the specialunder-head design inhibits over-tor-quing as well as self-loosening underdynamic load.Any unevenness in the set is smoothed
out by the special soft EPDM sealingwasher. So the bond is always safe andsecure.
Safe and easy installation with the
CF 400 installation tool
Even working on the roof, a simpleextension attached to the CF 400insertion tool is all that is required tomaintain a standing position.And using magazine-fed fastenersreally speeds up the whole process.
Neues Foto erstellen
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
8/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
96.
Composite panels
SL2-S
Stainless steel self drilling fasteners
Side lap and stitching
Accessories can be found in chapter 12
SL2-S
Technical information
Applications
Stainless steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of thethreads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners canbe used without depth stop or torque coupling.
Material
Fastener
SL2-SAustenitic stainless steel, gradeAISI 304 (European Standard1.4301), or grade AISI 316 (Europe-an Standard 1.4401) on request.
Washer
S = Stainless steel, grade AISI 304(European Standard 1.4301)A = Aluminiumwith vulcanised EPDM
Drill point
Case hardened, special carbonsteel
Coloured fastener
Coloured fasteners availableColour heads are achievedthrough powder coating
HD headform / drive
Hexagon 8 mm A/F irius 12 mm
Accessories
CF 400
Automatic setting tool for installingbelted fasteners (10 pcs) with amaximum 16 mm diameter washerand upto a maximum length of40 mm.
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
E420 / E480
The E420 setting tool is required forinstalling self drilling fasteners withthe irius system. The E480 settingtool is recommended for installingself drilling fasteners with thehexagon head.
7/31/2019 SFS Suruburi Panouri Sandwich Eng
9/26
2
3
4
5
6
7
8
9
0
1
2
3
4
106.
Composite panels
SL2-S
Stainless steel self drilling fasteners
Side lap and stitching
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F irius 12 mm Colouredfastener
W: Washer material
S Stainless SteelA Aluminium
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SL2-S- S14- 4,8x 22
Applications Product Approval Type HD W* d L KL Application range
Stainless steel SL2-S-
SL2-S-
SL2-S-
S14-
S14-
S14-
4,8x
5,5x
5,5x
22
22
27
VD max. steel2,0 mm
t min. steel:2 x 0,4 - 2 x 1,0 mm
Only for steel sheet and flashing
Stainless steel
DTU 40.35
DTU 40.36
SL2-S- L12- S14- 6,3x 28 VD max. steel2,0 mm
t min. steel:2 x 0,4 - 2 x 1,0 mm
Only for steel sheet and flashingStainless steel
DTU 40.35
DTU 40.36
SL2-S- S16- 6,3x 28
7/31/2019 SFS Suruburi Panouri Sandwich Eng
10/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
116.
Composite panels
LS
Against driving rain, dust, etc.
Sealing joint
LS
Product advantages
self-adhesive on one side to facili-tate applicationraintightseal permits vapour diffusioneasy to compress
Technical information
Applications
The pre-compressed tape is usedfor sealing joints against driving rain,dust, etc. It is suitable for longitudi-nal and transverse joints betweentrapezoidal profiles and sandwichelements.
Material
Open-cell polyurethane foamimpregnated with an acrylicpolymer.
Colour
Grey
Technical details
Item DIN Characteristics
Class of building material 4102 B2 (normally flammable)
Vapour diffusion resistance EN ISO 12572 100Heat resistance 30C to +90C
Compatibility with building 52453 granted
Joint permeability 18055 a 0,1 m3 / [h x m x (daPa)n]Processing temperature +5C to +50C
Shelf life 1 year
Storage temperature +1C to +20C
Driving rain leak-tightness 18055 300 Pa
Weathertightness 18542 Specification complied with
Order information
Example order code
LS- 10/ 2-3
Type tape width joint height box capacity m/roll
LS- 10/ 2-3 275 25
LS- 15/ 2-3 175 25
LS- 30/ 2-3 75 25
LS- 15/ 3-5 126 18
LS- 10/ 3-6 143 13
LS- 15/ 3-6 91 13
LS- 30/ 3-6 39 13
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
11/26
2
3
4
5
6
7
8
9
0
1
2
3
4
126.
Composite panels
EB
Thermal separation of structural components
Sealing joint
EB
Product advantages
self-adhesive on one side to facili-tate applicationnon-compressibledimensionally stable, even at hightemperatures
Technical information
Applications
The dimensionally stable sealing tapeis used for thermal separation ofstructural components, e.g. the topflange of liner trays, to minimise heatbuild-up.
Material
Non cross-linked, closed-cellpolypropylene copolymer foam;flame-retardant.
Colour
Anthrazit
Technical details
Item DIN CharacteristicsClass of building material 4102 B2 (normally flammable)
Heat resistance 30C to +130C
Compatibility with building 52453 granted
Processing temperature +5C to +50C
Shelf life 2 years
Storage temperature +1C to +20C
Thermal conductivity B2 (normally flammable)
Order information
Example order code
EB- 30/ 3
Type tape width tape thickness box capacity m/roll
EB- 30/ 3 720 30
EB- 60/ 3 360 30
EB- 80/ 3 270 30
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
12/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
136.
Composite panels
LD
Airtightness
Sealing joint
LD
Product advantages
self-adhesive on one side to facili-tate applicationgood adjustment even with widejoint tolerancesespecially easy to compressno deformation of the steel profilesleak-tight to driving rain up to600 Pa
stress class BG1
airtight
seal permits vapour diffusion
Technical information
Applications
The pre-compressed tape is used forairtight sealing of joints, e.g. for longi-tudinal and transverse liner joints andjoints between sandwich elements.
Material
Soft polyurethane foam impregnatedon the sides.
Colour
Anthrazit
Technical details
Item DIN Characteristics
Class of building material 4102 B1 (flame-retardant)Vapour diffusion resistance EN ISO 12572 100Heat resistance 30C to +90C
Compatibility with building 52453 granted
Joint permeability 18055 a 0,1 m3 / [h x m x (daPa)n]Processing temperature +1C to +50C
Shelf life 1 year
Storage temperature +1C to +20C
Driving rain leak-tightness 18055 leak-tight to driving rain up to 600 Pa
Weathertightness 18542 Specification complied with
Order information
Example order code
LD- 10/ 1-3
Type tape width joint height box capacity m/roll
LD- 10/ 1-3 240 30
LD- 14/ 1-3 330 30
LD- 10/ 1-4 176 22
LD- 14/ 1-4 242 22
LD- 10/ 2-6 270 18
LD- 14/ 2-6 198 18
LD- 14/ 3-9 132 12
LD- 18/ 6-18 48 6
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
13/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
17.
Composite panels Carbon steel self drilling fasteners
7Applications Product code PageComposite panel to steel sub-
structure SDT / SD 7.2`
Composite panel to timbersubstructure
SDTW 7.5`
Side lap and stitching SL2-T 7.9`
Flatroof insulated panel to steelsubstructure
SD-D10 7.11`
Sealing joint LS, EB, LD 7.13`
7/31/2019 SFS Suruburi Panouri Sandwich Eng
14/26
2
3
4
5
6
7
8
9
0
1
2
3
4
27.
Composite panels
SDT / SD
Carbon steel self drilling fasteners
Composite panel to steel substructure
Accessories can be found in chapter 12
SDT / SD
Technical information
Applications
Fastening composite panels to steel substructure. The unique thread free zone underneath the head ensure the fasteningwill remain sealed during the lifetime of the construction.
Material
FastenerSDT / SDPlated carbon steel, casehardened
WasherA = Aluminium with vulcanisedEPDMS = Stainless steel, grade AISI 304(European Standard 1.4301)
Coloured fastenerColoured fasteners availableColour heads are achievedthrough powder coating
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
Accessories
CF 55
A purpose designed setting toolfor installing long composite panelfasteners. The extension drive barand nosepiece ensure the fastenersare installed correctly.
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
7/31/2019 SFS Suruburi Panouri Sandwich Eng
15/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
37.
Composite panels
SDT / SD
Carbon steel self drilling fasteners
Composite panel to steel substructure
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Coloured
fastener
W: Washer material
T Carbon SteelA Aluminium
S Stainless steel
* Select Washer
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SDT 5- A19- 5,5x 67
Applications Product Approval Type VD W* d L D Application range
SFS
T
Carbon steel SDT
SDT
SDT
SDTSDT
SDT
SDT
SDT
SDT
5-
5-
5-
5-5-
5-
5-
5-
5-
A19-
A19-
A19-
A19-A19-
A19-
A19-
A19-
A19-
5,5x
5,5x
5,5x
5,5x5,5x
5,5x
5,5x
5,5x
5,5x
67
77
97
112137
162
182
226
276
31 - 45
39 - 55
49 - 75
59 - 9069 - 112
110 - 137
114 - 160
158 - 204
208 - 254
D
VD max. steel5,0 mm
t min. steel:1,5 mm
Carbon steel SDT
SDT
SDT
SDT
SDTSDT
SDT
SDT
SDT
SDT
14-
14-
14-
14-
14-14-
14-
14-
14-
14-
A19-
A19-
A19-
A19-
A19-A19-
A19-
A19-
A19-
A19-
5,5x
5,5x
5,5x
5,5x
5,5x5,5x
5,5x
5,5x
5,5x
5,5x
60
74
93
113
142160
186
212
233
280
29 - 32
38 - 48
48 - 67
68 - 87
87 - 116
94 - 134
122 - 160
147 - 185
167 - 207
214 - 254
D
VD max. steel14,0 mm
t min. steel:4,0 mm
SFS
S
Carbon steel SD
SD
SD
SD
SD
3-
3-
3-
3-
3-
S16-
S16-
S16-
S16-
S16-
5,5x
5,5x
5,5x
5,5x
5,5x
45
60
70
80
100
32
47
57
67
87
KL VD max. steel3,0 mm
t min. steel:2 x 0,6 mm
1,5 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
16/26
2
3
4
5
6
7
8
9
0
1
2
3
4
47.
Composite panels
SDT / SD
Carbon steel self drilling fasteners
Composite panel to steel substructure
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Colouredfastener
W: Washer material
T Carbon SteelA Aluminium
S Stainless steel
* Select Washer
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SDT 5- A19- 5,5x 67
Applications Product Approval Type VD W* d L D Application range
SFS
S
Carbon steel SDT
SDT
SDT
SDT
SDTSDT
5-
5-
5-
5-
5-5-
A16-
A16-
A16-
A16-
A16-A16-
5,5x
5,5x
5,5x
5,5x
5,5x5,5x
97
112
137
162
182226
49 - 75
59 - 90
69 - 112
110 - 137
114 - 160158 - 204
KL VD max. steel5,0 mm
t min. steel:1,5 mm
SFS
S
Carbon steel SD
SD
SD
SD
14-
14-
14-
14-
S16-
S16-
S16-
S16-
5,5x
5,5x
5,5x
5,5x
56
66
76
86
5 - 35
15 - 45
25 - 55
35 - 65
KL VD max. steel14,0 mm
t min. steel:4,0 mm
SFS
S
Carbon steel SDT
SDT
SDT
SDT
SDT
SDT
14-
14-
14-
14-
14-
14-
A16-
A16-
A16-
A16-
A16-
A16-
5,5x
5,5x
5,5x
5,5x
5,5x
5,5x
93
113
142
160
186
233
48 - 67
68 - 87
87 - 116
94 - 134
122 - 160
167 - 207
KL VD max. steel14,0 mm
t min. steel:4,0 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
17/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
57.
Composite panels
SDTW
Carbon steel self drilling fasteners
Composite panel to timber substructure
Accessories can be found in chapter 12
SDTW
Technical information
Applications
Fastening composite panels to timber substructure. The unique thread free zone underneath the head ensure the fasteningwill remain sealed during the lifetime of the construction.
Material
FastenerSDTWPlated carbon steel, casehardened
WasherA = Aluminium with vulcanisedEPDM
Coloured fastenerColoured fasteners availableColour heads are achievedthrough powder coating
HD headform / drive
Hexagon 8 mm A/F
Washer recommendation
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
Accessories
CF 55
A purpose designed setting toolfor installing long composite panelfasteners. The extension drive barand nosepiece ensure the fastenersare installed correctly.
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
7/31/2019 SFS Suruburi Panouri Sandwich Eng
18/26
2
3
4
5
6
7
8
9
0
1
2
3
4
67.
Composite panels
SDTW
Carbon steel self drilling fasteners
Composite panel to timber substructure
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Colouredfastener
W: Washer material
T Carbon SteelA Aluminium
* Select Washer
16-19 mm for cladding 19 mm for roofing 29 mm for rooflights
VD max. penetration | D panel thickness | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SDTW- A19- 6,5x 75
Applications Product Type W* d L D Application range
Carbon steel SDTW-
SDTW-
SDTW-
SDTW-
A19-
A19-
A19-
A19-
6,5x
6,5x
6,5x
6,5x
75
115
125
135
28 - 42
68 - 82
78 - 92
88 - 102
D
VD max. steel2,0 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
19/26
2
3
4
5
6
7
8
9
0
1
2
3
4
87.
Composite panels
SL2-T
Carbon self drilling stitchers
Side lap and stitching
The impressive features of the SL fastener
The secure and speedy way to fix overlapping profiles.
Incorrect insertion virtuallyeliminated
100 % functionality from start tofinish
EPDM washers ensure effectivesealing
Ergonomic working with the CF 400installation tool
Increased productivity thanksto magazine-fed fasteners=Time is money !
The SL self drilling fastener range,
specially developed for fixing onemetal profile to another, offersdecisive advantages in use and inits durability.
Self drilling fasteners for fast,
efficient overlapping
These special fasteners designedspecifically for thin overlapping profilesoffer a range of benefits.The optimum clamping strength resultsfrom careful matching of the tip to thethread diameter. Moreover, the specialunder-head design inhibits over-tor-quing as well as self-loosening underdynamic load.Any unevenness in the set is smoothed
out by the special soft EPDM sealingwasher. So the bond is always safe andsecure.
Safe and easy installation with the
CF 400 installation tool
Even working on the roof, a simpleextension attached to the CF 400insertion tool is all that is required tomaintain a standing position.And using magazine-fed fastenersreally speeds up the whole process.
Neues Foto erstellen
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
20/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
97.
Composite panels
SL2-T
Carbon self drilling stitchers
Side lap and stitching
Accessories can be found in chapter 12
SL2-T
Technical information
Applications
Carbon steel fastening of side laps and flashings. The thread-free zone under the fastener head prevents stripping of thethreads in the sheets. The sheets are pulled together tightly, clamped in the thread-free zone and sealed. The fasteners canbe used without depth stop or torque coupling.
Material
Fastener
SL2-TPlated carbon steel, casehardened
Washer
A = Aluminium with vulcanisedEPDM
Drill point
Case hardened, special carbonsteel
Coloured fastener
Coloured fasteners availableColour heads are achievedthrough powder coating
HD headform / drive
Hexagon 8 mm A/F
Accessories
CF 400
Automatic setting tool for installingbelted fasteners (10 pcs) with amaximum 16 mm diameter washerand upto a maximum length of40 mm.
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
E480
The E480 setting tool is recom-mended for installing self drillingfasteners with the hexagon head.
7/31/2019 SFS Suruburi Panouri Sandwich Eng
21/26
2
3
4
5
6
7
8
9
0
1
2
3
4
107.
Composite panels
SL2-T
Carbon self drilling stitchers
Side lap and stitching
Accessories can be found in chapter 12
Order information
KLL
d
Hexagon 8 mm A/F Colouredfastener
W: Washer material
T Carbon SteelA Aluminium
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SL2-T- A14- 4,8x 20
Applications Product Type W* d L KL Application range
Carbon steel SL2-T- A14- 4,8x 20 VD max. steel2 x 1,0 mm
t min. steel:2 x 0,4 - 2 x 1,0 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
22/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
117.
Composite panels
SD-D10
Carbon steel self drilling fasteners
Flatroof insulated panel to steel substructure
Accessories can be found in chapter 12
SD-D10
Technical information
Applications
Fastening flatroof insulated panel to steel substructure.
Material
Fastener
SD
Plated carbon steel, casehardened
Washer
T = steel zinc plated
HD headform / drive
Low profile 10 mm
Accessories
DI 600
Lightweight power screwgunfor installing self drilling andself tapping fasteners.
Torx
T25W-175
7/31/2019 SFS Suruburi Panouri Sandwich Eng
23/26
2
3
4
5
6
7
8
9
0
1
2
3
4
127.
Composite panels
SD-D10
Carbon steel self drilling fasteners
Flatroof insulated panel to steel substructure
Accessories can be found in chapter 12
Order information
KLL
d
Low profile 10 mm
VD max. penetration | KL clamping length | HD headform / drive | W washer material and diameter | d thread diameter | L overall length | t thickness of struc-ture | All measures in mm
Example order code
SD 3- D10- T19/C9- 5,5x 30
Applications Product Type VD HD W* d L KL Application range
Carbon steel SD 3- D10- T19/C9- 5,5x 30
VD
VD max. steel3,0 mm
t min. steel:2 x 0,6 mm
1,5 mm
Torx T25W - 175 mm
Carbon steel SD 14- D10- T19/C9- 5,5x 46
VD
VD max. steel14,0 mm
t min. steel:4,0 mm
Torx T25W - 175 mm
7/31/2019 SFS Suruburi Panouri Sandwich Eng
24/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
137.
Composite panels
LS
Against driving rain, dust, etc.
Sealing joint
LS
Product advantages
self-adhesive on one side to facili-tate applicationraintightseal permits vapour diffusioneasy to compress
Technical information
Applications
The pre-compressed tape is usedfor sealing joints against driving rain,dust, etc. It is suitable for longitudi-nal and transverse joints betweentrapezoidal profiles and sandwichelements.
Material
Open-cell polyurethane foamimpregnated with an acrylicpolymer.
Colour
Grey
Technical details
Item DIN Characteristics
Class of building material 4102 B2 (normally flammable)
Vapour diffusion resistance EN ISO 12572 100Heat resistance 30C to +90C
Compatibility with building 52453 granted
Joint permeability 18055 a 0,1 m3 / [h x m x (daPa)n]Processing temperature +5C to +50C
Shelf life 1 year
Storage temperature +1C to +20C
Driving rain leak-tightness 18055 300 Pa
Weathertightness 18542 Specification complied with
Order information
Example order code
LS- 10/ 2-3
Type tape width joint height box capacity m/roll
LS- 10/ 2-3 275 25
LS- 15/ 2-3 175 25
LS- 30/ 2-3 75 25
LS- 15/ 3-5 126 18
LS- 10/ 3-6 143 13
LS- 15/ 3-6 91 13
LS- 30/ 3-6 39 13
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
25/26
2
3
4
5
6
7
8
9
0
1
2
3
4
147.
Composite panels
EB
Thermal separation of structural components
Sealing joint
EB
Product advantages
self-adhesive on one side to facili-tate applicationnon-compressibledimensionally stable, even at hightemperatures
Technical information
Applications
The dimensionally stable sealing tapeis used for thermal separation ofstructural components, e.g. the topflange of liner trays, to minimise heatbuild-up.
Material
Non cross-linked, closed-cellpolypropylene copolymer foam;flame-retardant.
Colour
Anthrazit
Technical details
Item DIN CharacteristicsClass of building material 4102 B2 (normally flammable)
Heat resistance 30C to +130C
Compatibility with building 52453 granted
Processing temperature +5C to +50C
Shelf life 2 years
Storage temperature +1C to +20C
Thermal conductivity B2 (normally flammable)
Order information
Example order code
EB- 30/ 3
Type tape width tape thickness box capacity m/roll
EB- 30/ 3 720 30
EB- 60/ 3 360 30
EB- 80/ 3 270 30
Accessories can be found in chapter 12
7/31/2019 SFS Suruburi Panouri Sandwich Eng
26/26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Composite panels
LD
Airtightness
Sealing joint
LD
Product advantages
self-adhesive on one side to facili-tate applicationgood adjustment even with widejoint tolerancesespecially easy to compressno deformation of the steel profilesleak-tight to driving rain up to600 Pa
stress class BG1
airtight
seal permits vapour diffusion
Technical information
Applications
The pre-compressed tape is used forairtight sealing of joints, e.g. for longi-tudinal and transverse liner joints andjoints between sandwich elements.
Material
Soft polyurethane foam impregnatedon the sides.
Colour
Anthrazit
Technical details
Item DIN Characteristics
Class of building material 4102 B1 (flame-retardant)Vapour diffusion resistance EN ISO 12572 100Heat resistance 30C to +90C
Compatibility with building 52453 granted
Joint permeability 18055 a 0,1 m3 / [h x m x (daPa)n]Processing temperature +1C to +50C
Shelf life 1 year
Storage temperature +1C to +20C
Driving rain leak-tightness 18055 leak-tight to driving rain up to 600 Pa
Weathertightness 18542 Specification complied with
Order information
Example order code
LD- 10/ 1-3
Type tape width joint height box capacity m/roll
LD- 10/ 1-3 240 30
LD- 14/ 1-3 330 30
LD- 10/ 1-4 176 22
LD- 10/ 2-6 270 18
LD- 14/ 2-6 198 18
LD- 14/ 3-9 132 12
LD- 18/ 6-18 48 6