SFS-STANDARDIT 2009 SESKOn alueelta · IEC/TR 62513 Koneturvallisuus. Suuntaviivat tietoliikennejärjestelmien käyttämiseen turvallisuuteen liittyvissä sovelluksissa 2009-05-25

SFS-STANDARDIT 2009

Erikoisnumero tammikuu 2010

SESKOn alueelta julkaistut ja vahvistetut

Ajankohtaista sähkö- ja elektroniikka-alan standardoinnista

www.sesko.fi

SISÄLTÖ IEC-, EN- ja SFS-standardien valmistelu .................................... 2SFS-standardien valmistelu ............................................................. 3Johdanto ..................................................................................................... 3

SESKOn alueelta julkaistut ja vahvistetut standardit vuonna 2009 Suomenkielisinä julkaistut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot .............. 4 Ruotsinkielisinä julkaistut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot ............... 5 Luetteloimismenettelyllä vahvistetut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot ............................................................... 6 SESKOn valmistelemat SFS-käsikirjat ...................................... 24SESKOn komiteat ja työryhmät .................................................. 25SESKOn henkilöstö vastuualueineen...................................... 26 SESKOn 45-vuotisjuhlaseminaari 31.3.2010– Yhteistyöllä parempia standardeja ...................................... 27Standardien tilaaminen, yhteystietoja .................................. 28

4 5 v u o t t as ä h k ö a l a n standardeja

1 9 6 5 – 2 0 1 0

SESKO-lehti Ajankohtaista sähköalan standardoinnista. ISSN 0783-2729. Sisältöä saa lainata lähteen mainiten. JULKAISIJA: SESKO ry, Särkiniementie 3 , 00210, HELSINKI, p. (09) 696 391, faksi (09) 677 059, www.sesko.fi . TOIMITUS: Päätoimittaja Sinikka Hieta-Wilkman. Standardiluettelon toimittaja: Juha Vesa. Taitto: Tinni Karakorpi. Paino: Valopaino Oy TILAUKSET JA OSOITTEENMUUTOKSET: puh 09 696 3970, [email protected], vuosikerta 42 € , 4 + 1 nroa/2010.

Ehdotus uudeksi työkohteeksi (NP Äänestys•

Ylläpito-menettely

Valmistelu-vaihe

WG/PT/MT -ryhmien kansalliset jäsenet

•

Lausuntokierros (CD) Lausunto tarvittaessa•

Äänestyskierros (CDV)

Parallel UAP

Kansallinen lausuntokierrosÄänestys (IEC & CENELEC)Lausunto tarvittaessa (CENELEC)

•

•

•

Muodollinen loppuäänestys (FDIS) Parallel FDIS

Äänestykset ehdotuksiin (IEC & CENELEC)

•

IEC-standardi EN-standardi SFS-EN-standardi

IEC-, EN- ja SFS-standardien valmistelu. Rinnakkaismenettely.

SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009 �

Johdanto

Sähkö- ja elektroniikka-alalla standardit valmistellaan neljän pääperiaatteen mukaisesti:

1. Laaditaan maailmanlaajuinen IEC-standardi.

2. Laaditaan maailmanlaajuinen IEC-standardi, joka IEC/CENELEC-rinnakkaismenettelyllä vahvistetaan eurooppalaiseksi EN-standardiksi. Tämä on otettava kansallisesti käyttöön identtisenä SFS-EN-standardina.

3. Laaditaan eurooppalainen EN-standardi, joka on otettava kansallisesti käyttöön identtisenä SFS-EN-standardina.

4. Laaditaan kansallinen SFS-standardi joko IEC-standardin pohjalta tai puhtaasti kansallisista lähtökohdista.

EN-standardi on saatettava identtiseksi SFS-EN-standardiksi ja tämä voidaan tehdä yksinkertaisimmillaan luetteloimismenettelyä käyttämällä, jolloin kansallisesti ei julkaista mitään erillistä asiakirjaa, vaan ainoastaan asiasta ilmoitetaan SFS-tiedotuksessa.

Lisäksi SFS-EN-standardin tunnus ja nimi ilmoitetaan SFS-standardiluettelossa. SFS-EN-standardi voidaan vahvistaa suomalaiseksi standardiksi myös julkaisemalla siitä suomenkielinen käännös.

SFS-standardien valmistelu

(Kansalliset toimenpiteet)

IEC- standardi

tai HD-

asiakirja

SFS-standardin uusiminen

Kansallinen aloite

Standardin valmistelu SK-komiteassa

Kansallinen lausuntokierros

Standardin täsmentäminen

SESKOn hyväksyntä

SFS:n vahvistus

Standardin julkaiseminen (SFS)

SFS-standardi

� SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009

SESKOn valmistelemat standardit vuonna 2009

Tässä luettelossa esitetään SESKOn toimialueelta vuonna 2009 julkaistut SFS-standardit (suomen- tai ruotsin-kieliset) sekä luetteloimalla vahvistetut SFS-standardit (englanninkieliset).

SFS-tunnus Otsikko Vahvistus/ julkaisupvm

Suomenkielisinä julkaistut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot

SFS 2283 Uppoasennusrasiat. 78 mm jakorasia. Mitat 2009-02-16

SFS 2284 Uppoasennusrasiat. Kojerasia. Mitat 2009-02-16

SFS 2711 Sähkölämmittimet ja sähkölämmitysjärjestelmät. Käsitteet ja merkinnät 2009-03-09

SFS 3718 Uppoasennusrasiat. 70 mm jakorasia. Mitat 2009-02-16

SFS 3719 Uppoasennusrasiat. Kaksoiskojerasia. Mitat 2009-02-16

SFS 4884 Uppoasennusrasiat. Kojerasioiden kannet ja peitelevyt. Mitat 2009-02-16

SFS 5490 Pienjännitevarokkeet. Ammattihenkilöiden käyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa teollisuuskäytön varokkeet). Kahvavarokkeet

2009-12-14

SFS 5798 Kotitalouksiin ja vastaaviin käyttöihin tarkoitetut pistokytkimet. Suojajännitepistokytkimet (SELV)

2009-12-14

SFS 5801 Voimakaapelit. Yleiset vaatimukset ja testaus alhaisessa lämpötilassa 2009-06-22

SFS 5855 Pienjännitevarokkeet. Maallikoiden käyttöön tarkoitettujen varokkeiden lisävaatimukset (pääasiassa kotitalouksiin ja vastaaviin käyttöihin tarkoitetut varokkeet). D-tyypin varokkeet

2009-12-14

SFS 6001 + A1 + A2 Suurjännitesähköasennukset 2009-05-25

SFS 6001/A2 Suurjännitesähköasennukset. Muutos 2 2009-05-25

SFS-EN 12665 Valo ja valaistus. Perustermit ja kriteerit valaistusvaatimusten määrittelemiseksi

2009-04-20

SFS-EN 15193 Rakennusten energiatehokkuus. Valaistuksen energiatehokkuus 2009-09-07

SFS-EN 50131-1 + A1 Hälytysjärjestelmät. Murto- ja ryöstöilmaisujärjestelmät. Osa 1: Järjestelmävaatimukset

2009-08-17

SFS-EN 50131-1/A1 Hälytysjärjestelmät. Murto- ja ryöstöilmaisujärjestelmät. Osa 1: Järjestelmävaatimukset

2009-08-17

SFS-CLC/TS 50131-7 Hälytysjärjestelmät. Murto- ja ryöstöilmaisujärjestelmät. Osa 7: Soveltamisohjeet

2009-03-30

SFS-EN 50174-1 Tietotekniikka. Kaapeloinnin asentaminen. Osa 1: Asennuksen spesifiointi ja laadunvarmistus

2009-09-07

SFS-EN 50174-2 Tietotekniikka. Kaapeloinnin asentaminen. Osa 2: Asennuksen suunnittelu ja asennuskäytännöt rakennusten sisätiloissa

2009-09-07

SFS-CLC/TS 50398 Hälytysjärjestelmät. Yhdistetyt ja integroidut hälytysjärjestelmät. Yleiset vaatimukset

2009-05-11

SFS-EN 50408 Kotitaloussähkölaitteiden ja vastaavien turvallisuus. Ajoneuvojen sisälämmittimien erityisvaatimukset

2009-08-17



SFS-EN 50491-3 Yleiset vaatimukset kotien ja rakennusten elektroniikkajärjestelmille (HBES) sekä rakennusautomaatio- ja ohjausjärjestelmille (BACS). Osa 3: Sähköturvallisuusvaatimukset

2009-10-12

SFS-EN 60079-14 Räjähdysvaaralliset tilat. Osa 14: Sähköasennusten suunnittelu, laitevalinta ja asentaminen

2009-05-25

SFS-EN 60079-17 Räjähdysvaaralliset tilat. Osa 17: Sähköasennusten tarkastus ja kunnossapito

2009-08-17

SFS-EN 60079-30-1 Räjähdysvaaralliset tilat. Osa 30-1: Sähkösaatot. Yleiset ja testausvaatimukset

2009-06-22

SFS-EN 60079-30-2 Räjähdysvaaralliset tilat. Osa 30-2: Sähkösaatot. Soveltamisohjeita suunnitteluun, asentamiseen ja kunnossapitoon

2009-06-22

SFS-EN 60204-1/A1 Koneturvallisuus. Koneiden sähkölaitteisto. Osa 1: Yleiset vaatimukset 2009-05-11

SFS-EN 60335-1/A13 Kotitaloussähkölaitteiden ja vastaavien turvallisuus. Osa 1: Yleiset vaatimukset

2009-08-17

SFS-EN 60376 Vaatimukset sähkölaitteissa käytettävälle tekniselle rikkiheksafluoridille (SF6)

2009-11-23

SFS-EN 60480 Ohjeet sähkölaitteista poistettavien rikkiheksafluoridin (SF6) tarkastamisesta ja käsittelemisestä sekä sen uudelleen käytöstä

2009-11-23

SFS-EN 60598-1 + A11 Valaisimet. Osa 1: Yleiset vaatimukset ja testit 2009-09-21

SFS-EN 60947-1 Pienjännitekytkinlaitteet. Osa 1: Pienkytkinlaitteet. Yleiset vaatimukset 2009-06-22

SFS-EN 61230 Jännitetyöt. Siirrettävät työmaadoitusvälineet tai työmaadoitus- ja oikosulkuvälineet

2009-06-22

SFS-EN 61242/A1 Asennustarvikkeet. Johtokelat kotitalouksiin ja vastaaviin käyttöihin 2009-03-09

SFS-EN 61340-5-1 Staattinen sähkö. Osa 5-1: Elektronisten komponenttien suojaaminen staattiselta sähköltä. Yleiset vaatimukset

2009-05-11

CLC/TR 61340-5-2 Staattinen sähkö. Osa 5-2: Elektronisten komponenttien suojaaminen staattiselta sähköltä. Käyttäjän opas

2009-03-30

SFS-EN 62430 Sähkö- ja elektroniikkatuotteiden ympäristötietoinen suunnittelu 2009-09-07

IEC/TR 62513 Koneturvallisuus. Suuntaviivat tietoliikennejärjestelmien käyttämiseen turvallisuuteen liittyvissä sovelluksissa

2009-05-25

SFS-EN 81346-2 Teollisuuden järjestelmät, asennukset ja laitteet sekä teollisuustuotteet. Jäsentelyn periaatteet ja viitetunnukset. Osa 2: Kohteiden luokittelu ja luokkia vastaavat koodit

2009-11-02

SFS-IEC 60050-411 + A1 Sähköteknillinen sanasto. Osa 411: Pyörivät koneet 2009-02-16

SFS-IEC 60050-461 Sähköteknillinen sanasto. Osa 461: Energiakaapelit 2009-06-22

SFS-IEC 60050-617 Sähköteknillinen sanasto. Osa 617: Organisaatio/sähkömarkkinat 2009-09-21

Ruotsinkielisinä julkaistut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot

SFS 6001 + A1 + A2 Högspänningselinstallationer 2009-05-25

SFS 6001/A2 Högspänningselinstallationer. Omändring A2 2009-05-25



Luetteloimismenettelyllä vahvistetut SFS-standardit, teknilliset raportit ja teknilliset spesifikaatiot

SFS-CLC/TS 50131-2-7-1 Alarm systems. Intrusion and hold-up systems. Part 2-7-1: Intrusion detectors. Glass break detectors (acoustics)

2009-10-12

SFS-CLC/TS 50131-2-7-2 Alarm systems. Intrusion and hold-up systems. Part 2-7-2: Intrusion detectors. Glass break detectors (passive)

2009-10-12

SFS-CLC/TS 50131-2-7-3 Alarm systems. Intrusion and hold-up systems. Part 2-7-3: Intrusion detectors. Glass break detectors (active)

2009-10-12

SFS-EN 41003 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system

2009-06-22

SFS-EN 50083-8/A11 Cable networks for television signals, sound signals and interactive services. Part 8: Electromagnetic compatibility for networks

2009-06-22

SFS-EN 50090-3-3 Home and building electronic systems (HBES). Part 3-3: Aspects of applications. HBES interworking model and common HBES data types

2009-10-12

SFS-EN 50106 Safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of EN 60335-1

2009-02-16

SFS-EN 50131-2-3 Alarm systems. Intrusion and hold-up systems. Part 2-3: Requirements for microwave detectors

2009-02-16

SFS-EN 50131-2-5 Alarm systems. Intrusion and hold-up systems. Part 2-5: Requirements for combined passive infrared and ultrasonic detectors

2009-02-16

SFS-EN 50131-2-6 Alarm systems. Intrusion and hold-up systems. Part 2-6: Opening contacts (magnetic)

2009-02-16

SFS-EN 50131-3 Alarm systems. Intrusion systems. Part 3: Control and indicating equipment

2009-10-12

SFS-EN 50131-4 Alarm systems. Intrusion and hold-up systems. Part 4: Warning devices 2009-10-12

SFS-EN 50131-5-3/A1 Alarm systems. Intrusion systems. Part 5-3: Requirements for interconnections equipment using radio frequency techniques

2009-10-12

SFS-EN 50131-8 Alarm systems. Intrusion and hold up-systems. Part 8: Security fog device/systems

2009-10-12

SFS-EN 50143 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 000 V but not exceeding 10 000 V

2009-10-12

SFS-EN 50164-1 Lightning Protection Components (LPC). Part 1: Requirements for connection components

2009-04-20

SFS-EN 50164-2 Lightning protection components (LPC). Part 2: Requirements for conductors and earth electrodes

2009-04-20

SFS-EN 50164-4 Lightning Protection Components (LPC). Part 4: Requirements for conductor fasteners

2009-04-20

SFS-EN 50164-7 Lightning Protection Components (LPC). Part 7: Requirements for earthing enhancing compounds

2009-04-20

SFS-EN 50194-1 Electrical apparatus for the detection of combustible gases in domestic premises. Part 1: Test methods and performance requirements

2009-06-22

SFS-EN 50216-9 Power transformer and reactor fittings. Part 9: Oil-to-water heat exchangers

2009-10-12



SFS-EN 50216-10 Power transformer and reactor fittings. Part 10: Oil-to-air heat exchangers 2009-10-12

SFS-EN 50216-11 Power transformer and reactor fittings. Part 11: Oil and winding temperature indicators

2009-06-22

SFS-EN 50242 Electric dishwashers for household use. Test methods for measuring the performance

2009-06-22

SFS-EN 50290-2-24/A1 Communication cables. Part 2-24: Common design rules and construction. PE sheathing

2009-06-22

SFS-EN 50304 Electric ovens for household use. Methods for measuring the energy consumption

2009-10-12

SFS-EN 50342-3 Lead-acid starter batteries. Part 3: Terminal system for batteries with 36 V nominal voltage

2009-02-16

SFS-EN 50377-2-2 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 2-2 : FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C

2009-10-12

SFS-EN 50402/A1 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems

2009-04-20

SFS-EN 50411-2 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors

2009-02-16

SFS-EN 50411-2-5 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A

2009-10-12

SFS-EN 50411-2-8 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 2-8: Microduct connectors, for air blown optical fibres, type 1

2009-10-12

SFS-EN 50413 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)

2009-06-22

SFS-EN 50428/A2 Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES)

2009-10-12

SFS-EN 50465 Gas appliances. Fuel cell gas heating appliance. Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW

2009-04-20

SFS-EN 50483-1 Test requirements for low voltage aerial bundled cable accessories. Part 1: Generalities

2009-06-22

SFS-EN 50483-2 Test requirements for low voltage aerial bundled cable accessories. Part 2: Tension and suspension clamps for self supporting system

2009-06-22

SFS-EN 50483-3 Test requirements for low voltage aerial bundled cable accessories. Part 3: Tension and suspension clamps for neutral messenger system

2009-06-22

SFS-EN 50483-4 Test requirements for low voltage aerial bundled cable accessories. Part 4: Connectors

2009-06-22

SFS-EN 50483-5 Test requirements for low voltage aerial bundled cable accessories. Part 5: Electrical ageing test

2009-06-22

SFS-EN 50483-6 Test requirements for low voltage aerial bundled cable accessories. Part 6: Environmental testing

2009-06-22



SFS-EN 50490 Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps

2009-02-16

SFS-EN 50492 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations

2009-02-16

SFS-EN 50496 Determination of workers` exposure to electromagnetic fields and assessment of risk at a broadcast site

2009-02-16

SFS-EN 50499 Procedure for the assessment of the exposure of workers to electromagnetic fields

2009-06-22

SFS-EN 50508 Multi-purpose insulating sticks for electrical operations on high voltage installations

2009-10-12

SFS-EN 50512 Electrical installations for lighting and beaconing of aerodromes. Advanced Visual Docking Guidance Systems (A-VDGS)

2009-06-22

SFS-EN 50514 Audio, video and information technology equipment. Routine electrical safety testing in production

2009-06-22

SFS-EN 55014-2/A2 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2: Immunity. Product family standard

2009-06-22

SFS-EN 55016-1-1/A2 Specification for radio disburbance and immunity measuring apparatus and methods. Part 1-1: Radio disturbance and immunity measuring apparatus. Measurement apparatus

2009-06-22

SFS-EN 55016-1-4/A1 Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-4: Radio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances

2009-06-22

SFS-EN 55025 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers

2009-06-22

SFS-EN 60034-4 Rotating electrical machines. Part 4: Methods for determining synchronous machine quantities from tests

2009-02-16

SFS-EN 60061-1/A40 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

2009-02-16

SFS-EN 60061-1/A41 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

2009-10-12

SFS-EN 60061-2/A37 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

2009-02-16

SFS-EN 60061-2/A38 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

2009-10-12

SFS-EN 60061-3/A39 Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

2009-10-12

SFS-EN 60064/A11 Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements

2009-06-22

SFS-EN 60065/A11 Audio, video and similar electronic apparatus. Safety requirements 2009-06-22

SFS-EN 60068-2-2 Environmental testing. Part 2-2: Tests. Tests B: Dry heat 2009-04-20

SFS-EN 60068-2-20 Environmental testing. Part 2: Tests. Test T: Test methods for soldeability and resistance to soldering heat of devices with leads

2009-02-16



SFS-EN 60068-2-27 Environmental testing. Part 2-27: Tests. Test Ea and guidance: Shock 2009-10-12

SFS-EN 60068-2-31 Environmental testing. Part 2-31: Tests. Test Ec: Rough Handling Shocks, primarily for equipment-type specimens

2009-02-16

SFS-EN 60068-2-64 Environmental testing. Part 2-64: Tests. Test Fh: Vibration, broadband random and guidance

2009-02-16

SFS-EN 60068-2-69 Environmental testing. Part 2-69: Tests. Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method

2009-04-20

SFS-EN 60068-2-82 Environmental testing. Part 2-82: Tests. Test Tx: Whisker test methods for electronic and electric components

2009-04-20

SFS-EN 60068-3-11 Environmental testing. Part 3-11: Supporting documentation and guidance. Calculation of the uncertainty of conditions in climatic test chambers

2009-04-20

SFS-EN 60079-6 Explosive atmospheres. Part 6: Equipment protection by oil immersion “o” 2009-04-20

SFS-EN 60079-27 Explosive atmospheres. Part 27: Fieldbus intrinsically safe concept (FISCO)

2009-04-20

SFS-EN 60099-4/A2 Surge arresters. Part 4: Metal-oxide surge arresters without gaps for a.c. systems

2009-10-12

SFS-EN 60127-4/A1 Miniature fuses. Part 4: Universal modular fuse-links (UMF). Through-hole and surface mount types

2009-06-22

SFS-EN 60137 Insulated bushings for alternating voltages above 1000 V 2009-06-22

SFS-EN 60238/A1 Edison screw lampholders 2009-02-16

SFS-EN 60255-22-3 Measuring relays and protection equipment. Part 22-3: Electrical disturbance tests. Radiated electromagnetic field immunity

2009-06-22

SFS-EN 60264-1/A1 Packaging of winding wires. Part 1: Containers for round winding wires 2009-10-12

SFS-EN 60286-2 Packaging of components for automatic handling. Part 2: Packaging of components with unidirectional leads on continuous tapes

2009-06-22

SFS-EN 60286-5/A1 Packaging of components for automatic handling. Part 5: Matrix trays 2009-10-12

SFS-EN 60297-3-100 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets

2009-06-22

SFS-EN 60297-3-105 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Part 3-105: Dimensions and design aspects for 1U high chassis

2009-06-22

SFS-EN 60300-3-16 Dependability management. Part 3-16: Application guide. Guidelines for the specification of maintenance support services

2009-04-20

SFS-EN 60317-0-3 Specifications for particular types of winding wires. Part 0: General requirements. Section 3: Enamelled round aluminium wire

2009-06-22

SFS-EN 60318-6 Electroacoustics. Simulators of human head and ear. Part 6: Mechanical coupler for the measurement of bone vibrators

2009-06-22

SFS-EN 60335-2-5/A2 Household and similar electrical appliances. Safety. Part 2-5: Particular requirements for dishwashers

2009-02-16

SFS-EN 60335-2-5/A11 Household and similar electrical appliances. Safety. Part 2-5: Particular requirements for dishwashers

2009-06-22

10 SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009


SFS-EN 60335-2-8/A2 Household and similar electrical appliances. Safety. Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

2009-02-16

SFS-EN 60335-2-11/A11 Household and similar electrical appliances. Safety. Part 2-11: Particular requirements for tumble dryers

2009-02-16

SFS-EN 60335-2-14/A1 Household and similar electrical appliances. Safety. Part 2–14: Particular requirements for kitchen machines

2009-02-16

SFS-EN 60335-2-15/A2 Household and similar electrical appliances. Safety. Part 2-15: Particular requirements for appliances for heating liquids

2009-02-16

SFS-EN 60335-2-17/A2 Household and similar electrical appliances. Safety. Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances

2009-06-22

SFS-EN 60335-2-21/A2 Household and similar electrical appliances. Safety. Part 2-21: Particular requirements for storage water heaters

2009-06-22

SFS-EN 60335-2-27/A1 Household and similar electrical appliances. Safety. Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

2009-02-16

SFS-EN 60335-2-27/A2 Household and similar electrical appliances. Safety. Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

2009-02-16

SFS-EN 60335-2-31/A2 Household and similar electrical appliances. Safety. Part 2–31: Particular requirements for range hoods and other cooking fume extractors

2009-10-12

SFS-EN 60335-2-32/A1 Household and similar electrical appliances. Safety. Part 2-32: Particular requirements for massage appliances

2009-02-16

SFS-EN 60335-2-34/A2 Household and similar electrical appliances. Part 2-34: Safety. Particular requirements for motor-compressors

2009-06-22

SFS-EN 60335-2-39/A2 Household and similar electrical appliances. Safety. Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans

2009-02-16

SFS-EN 60335-2-40/A2 Household and similar electrical appliances. Safety. Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

2009-10-12

SFS-EN 60335-2-42/A1 Household and similar electrical appliances. Safety. Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

2009-02-16

SFS-EN 60335-2-43/A2 Household and similar electrical appliances. Safety. Part 2-43: Particular requirements for clothes dryers and towel rails

2009-02-16

SFS-EN 60335-2-49/A1 Household and similar electrical appliances. Safety. Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

2009-02-16

SFS-EN 60335-2-54 Household and similar electrical appliances. Safety. Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

2009-06-22

SFS-EN 60335-2-60/A2 Household and similar electrical appliances. Safety. Part 2: Particular requirements for whirlpool baths and whirlpool spas

2009-02-16

SFS-EN 60335-2-61/A2 Household and similar electrical appliances. Safety. Part 2-61: Particular requirements for thermal-storage room heaters

2009-02-16

SFS-EN 60335-2-75/A1 Household and similar electrical appliances. Safety. Part 2-75: Particular requirements for commercial dispensing appliances and vending machines

2009-02-16

SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009 11


SFS-EN 60335-2-80/A2 Household and similar electrical appliances. Safety. Part 2-80: Particular requirements for fans

2009-10-12

SFS-EN 60335-2-96/A2 Household and similar electrical appliances. Safety. Part 2-96: Particular requirements for flexible sheet heating elements for room heating

2009-06-22

SFS-EN 60335-2-97/A11 Household and similar electrical appliances. Safety. Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

2009-06-22

SFS-EN 60335-2-98/A2 Household and similar electrical appliances. Safety. Part 2-98: Particular requirements for humidifiers

2009-02-16

SFS-EN 60350 Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance

2009-10-12

SFS-EN 60352-5 Solderless connections. Part 5: Press-in connections. General requirements, test methods and practical guidance

2009-04-20

SFS-EN 60357/A2 Tungsten halogen lamps (non-vehicle). Performance specifications 2009-02-16

SFS-EN 60399/A1 Barrel thread for lampholders with shade holder ring 2009-02-16

SFS-EN 60400 Lampholders for turbular fluorescent lamps and starterholders 2009-02-16

SFS-EN 60404-4/A2 Magnetic materials. Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

2009-06-22

SFS-EN 60404-8-6 Magnetic materials. Part 8-6: Specifications for individual materials. Soft magnetic metallic materials

2009-06-22

SFS-EN 60424-5 Ferrite cores. Guide on the limits of surface irregularities. Part 5: Planar-cores

2009-10-12

SFS-EN 60512-15-1 Connectors for electronic equipment. Tests and measurements. Part 15-1: Connector tests (mechanical). Test 15a: Contact retention in insert

2009-06-22

SFS-EN 60512-15-2 Connectors for electronic equipment. Tests and measurements. Part 15-2: Connector tests (mechanical). Test 15b: Insert retention in housing (axial)

2009-06-22

SFS-EN 60512-15-3 Connectors for electronic equipment. Tests and measurements. Part 15-3: Connector tests (mechanical). Test 15c: Insert retention in housing (torsional)

2009-06-22

SFS-EN 60512-15-4 Connectors for electronic equipment. Tests and measurements. Part 15-4: Connector tests (mechanical). Test 15d: Contact insertion, release and extraction force

2009-06-22

SFS-EN 60512-15-5 Connectors for electronic equipment. Tests and measurements. Part 15-5: Connector tests (mechanical). Test 15e: Contact retention in insert, cable nutation

2009-06-22

SFS-EN 60512-15-6 Connectors for electronic equipment. Tests and measurements. Part 15-5: Connector tests (mechanical). Test 15f: Effectiveness of connector coupling devices

2009-06-22

SFS-EN 60512-15-7 Connectors for electronic equipment. Tests and measurements. Part 15-7: Connector tests (mechanical). Test 15g: Robustness of protective cover attachment

2009-06-22

SFS-EN 60512-16-1 Connectors for electronic equipment. Tests and measurements. Part 16-1: Mechanical tests on contacts and terminations. Test 16a: Probe damage

2009-06-22

SFS-EN 60512-16-2 Connectors for electronic equipment. Tests and measurements. Part 16-2: Mechanical tests on contacts and terminations. Test 16b: Restricted entry

2009-06-22



SFS-EN 60512-16-3 Connectors for electronic equipment. Tests and measurements. Part 16-3: Mechanical tests on contacts and terminations. Test 16c: Contact-bending strength

2009-06-22

SFS-EN 60512-16-4 Connectors for electronic equipment. Tests and measurements. Part 16-4: Mechanical tests on contacts and terminations. Test 16d: Tensile strength (crimped connections)

2009-06-22

SFS-EN 60512-16-5 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

2009-06-22

SFS-EN 60512-16-6 Connectors for electronic equipment. Tests and measurements. Part 16-6: Mechanical tests on contacts and terminations. Test 16f: Robustness of terminations

2009-06-22

SFS-EN 60512-16-7 Connectors for electronic equipment. Tests and measurements. Part 16-7: Mechanical tests on contacts and terminations. Test 16g: Measurement of contact deformation after crimping

2009-06-22

SFS-EN 60512-16-8 Connectors for electronic equipment. Tests and measurements. Part 16-8: Mechanical tests on connections and terminations. Test 16h: Insulating grip effectiveness (crimped contacts)

2009-06-22

SFS-EN 60512-16-9 Connectors for electronic equipment. Tests and measurements. Part 16-9: Mechanical tests on contacts and terminations. Test 16i: Grounding contact spring holding force

2009-06-22

SFS-EN 60512-16-11 Connectors for electronic equipment. Tests and measurements. Part 16-11: Mechanical tests on contacts and terminations. Test 16k: Stripping force, solderless wrapped connections

2009-06-22

SFS-EN 60512-16-13 Connectors for electronic equipment. Tests and measurements. Part 16-13: Mechanical tests on contacts and terminations. Test 16m: Un-wrapping, solderless wrapped connections

2009-06-22

SFS-EN 60512-16-14 Connectors for electronic equipment. Tests and measurements. Part 16-14: Mechanical tests on contacts and terminations. Test 16n: Bending strength, fixed male tabs

2009-06-22

SFS-EN 60512-16-16 Connectors for electronic equipment. Tests and measurements. Part 16-16: Mechanical tests on contacts and terminations. Test 16p: Torsional strength, fixed male tabs

2009-06-22

SFS-EN 60512-16-17 Connectors for electronic equipment. Tests and measurements. Part 16-17: Mechanical tests on contacts and terminations. Test 16q: Tensile and compressive strength, fixed male tabs

2009-06-22

SFS-EN 60512-16-18 Connectors for electronic equipment. Tests and measurements. Part 16-18: Mechanical tests on contacts and terminations. Test 16r: Deflection of contacts, simulation

2009-06-22

SFS-EN 60512-25-9 Connectors for electrical equipment. Tests and measurements. Part 25-9: Signal integrity tests. Test 25i: Alien crosstalk

2009-06-22

SFS-EN 60512-26-100 Connectors for electronic equipment. Tests and measurements. Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g

2009-06-22

SFS-EN 60519-7 Safety in electroheat installations. Part 7: Particular requirements for installations with electron guns

2009-06-22

SFS-EN 60519-21 Safety in electroheat installations. Part 21: Particular requirements for resistance heating equipment. Heating and melting glass equipment

2009-06-22

SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009 1�


SFS-EN 60534-2-4 Industrial-process control valves. Part 2-4: Flow capacity. Inherent flow characteristics and rangeability

2009-10-12

SFS-EN 60598-2-14 Luminaires. Part 2-14: Particular requirements. Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

2009-10-12

SFS-EN 60601-2-2 Medical electrical equipment. Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories

2009-10-12

SFS-EN 60601-2-19 Medical electrical equipment. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators

2009-10-12

SFS-EN 60601-2-21 Medical electrical equipment. Part 2: Particular requirements for the basic safety and essential performance of infant radiant warmers

2009-10-12

SFS-EN 60601-2-29 Medical electrical equipment. Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators

2009-06-22

SFS-EN 60601-2-44 Medical electrical equipment. Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography

2009-10-12

SFS-EN 60601-2-50 Medical electrical equipment. Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment

2009-10-12

SFS-EN 60626-3 Combined flexible materials for electrical insulation. Part 3: Specifications for individual materials

2009-02-16

SFS-EN 60641-3-1 Pressboard and presspaper for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

2009-02-16

SFS-EN 60689 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values

2009-10-12

SFS-EN 60695-1-30 Fire hazard testing. Part 1-30: Guidance for assessing the fire hazard of electrotechnical products. Preselection testing process. General guidelines

2009-02-16

SFS-EN 60700-1/A2 Thyristor valves for high voltage direct current (HVDC) power transmission. Part 1: Electrical testing

2009-06-22

SFS-EN 60703 Test methods for electroheating installations with electron guns 2009-06-22

SFS-EN 60704-2-13/A2 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Part 2-13: Particular requirements for range hoods

2009-02-16

SFS-EN 60728-1 Cable networks for television signals, sound signals and interactive services. Part 1: System performance of forward paths

2009-06-22

SFS-EN 60728-4 Cable networks for television signals, sound signals and interactive services. Part 4: Passive wideband equipment for coaxial cable networks

2009-06-22

SFS-EN 60728-5 Cabled networks for television signals, sound signals and interactive services. Part 5: Headend equipment

2009-06-22

SFS-EN 60730-2-6 Automatic electrical controls for household and similar use. Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

2009-06-22

SFS-EN 60730-2-14/A2 Automatic electrical controls for household and similar use. Part 2-14: Particular requirements for electric actuators

2009-06-22

SFS-EN 60745-2-1/A1 Hand-held motor-operated electric tools. Safety. Part 2-1: Particular requirements for drills and impact drills

2009-10-12

1� SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009


SFS-EN 60745-2-2/A1 Hand-held motor-operated electric tools. Safety. Part 2-2: Particular requirements for screwdrivers and impact wrenches

2009-10-12

SFS-EN 60745-2-4/A1 Hand-held motor-operated electric tools. Safety. Part 2-4: Particular requirements for sanders and polishers other than disk type

2009-10-12

SFS-EN 60745-2-6/A2 Hand-held motor-operated electric tools. Safety. Part 2-6: Particular requirements for hammers

2009-10-12

SFS-EN 60745-2-8/A1 Hand-held motor-operated electric tools. Safety. Part 2-8: Particular requirements for shears and nibblers

2009-10-12

SFS-EN 60745-2-11/A1 Hand-held motor-operated electric tools. Safety. Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)

2009-10-12

SFS-EN 60745-2-12/A1 Hand-held motor operated electric tools. Safety. Part 2-12: Particular requirements for concrete vibrators

2009-10-12

SFS-EN 60745-2-20/A1 Hand-held motor-operated electric tools. Safety. Part 2-20: Particular requirements for band saws

2009-10-12

SFS-EN 60749-37 Semiconductor devices. Mechanical and climatic test methods. Part 37: Board level drop test method using an accelerometer

2009-06-22

SFS-EN 60749-38 Semiconductor devices. Mechanical and climatic test methods. Part 38: Soft error test method for semiconductor devices with memory

2009-06-22

SFS-EN 60751 Industrial platinum resistance thermometers and platinum temperature sensors

2009-02-16

SFS-EN 60758 Synthetic quartz crystal. Specifications and guide for use 2009-06-22

SFS-EN 60793-1-1 Optical fibres. Part 1-1: Measurement methods and test procedures. General and guidance

2009-02-16

SFS-EN 60793-1-47 Optical fibres. Part 1–47: Measurement methods and test procedures. Macrobending loss

2009-10-12

SFS-EN 60793-2-20 Optical fibres. Part 2-20: Product specifications. Sectional specification for category A2 multimode fibres

2009-10-12

SFS-EN 60793-2-30 Optical fibres. Part 2-30: Product specifications. Sectional specification for category A3 multimode fibres

2009-10-12

SFS-EN 60793-2-50 Optical fibres. Part 2-50: Product specifications. Sectional specification for class B single-mode fibres

2009-02-16

SFS-EN 60794-2-30 Optical fibre cables. Part 2-30: Indoor cables. Family specification for ribbon cables

2009-06-22

SFS-EN 60794-2-41 Optical fibre cables. Part 2-41: Indoor cables. Product specification for simplex and duplex buffered A4 fibres

2009-02-16

SFS-EN 60794-3-10 Optical fibre cables. Part 3-10: Outdoor cables. Family specification for duct, directly buried and lashed aerial optical telecommunication cables

2009-10-12

SFS-EN 60794-3-20 Optical fibre cables. Part 3-20: Outdoor cables. Family specification for self-supporting aerial telecommunication cables

2009-10-12

SFS-EN 60794-3-30 Optical fibres cables. Part 3-30: Outdoor cables. Family specification for optical telecommunication cables for lakes and river crossings

2009-02-16

SFS-EN 60794-3-40 Optical fibre cables. Part 3-40: Outdoor optical fibre cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers

2009-06-22



SFS-EN 60794-3-50 Optical fibre cables. Part 3-50: Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes

2009-06-22

SFS-EN 60794-3-60 Optical fibre cables. Part 3-60: Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes

2009-06-22

SFS-EN 60809/A4 Lamps for road vehicles. Dimensional, electrical and luminous requirements

2009-10-12

SFS-EN 60810/A1 Lamps for road vehicles. Performance requirements 2009-02-16

SFS-EN 60825-4/A1 Safety of laser products. Part 4: Laser guards 2009-02-16

SFS-EN 60838-1/A1 Miscellaneous lampholders. Part 1: General requirements and tests 2009-02-16

SFS-EN 60851-3 Winding wires. Test methods. Part 3: Mechanical properties 2009-10-12

SFS-EN 60851-5 Winding wires. Test methods. Part 5: Electrical properties 2009-06-22

SFS-EN 60898-1/A12 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Part 1: Circuit-breakers for a.c. operation

2009-06-22

SFS-EN 60904-3 Photovoltaic devices. Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

2009-04-20

SFS-EN 60947-3 Low-voltage switchgear and controlgear. Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

2009-10-12

SFS-EN 60947-5-1/A1 Low-voltage switchgear and controlgear. Part 5-1: Control circuit devices and switching elements. Electromechanical control circuit devices

2009-10-12

SFS-EN 60950-22/A11 Information technology equipment. Safety. Part 22: Equipment installed outdoor

2009-06-22

SFS-EN 60958-1 Digital audio interface. Part 1: General 2009-06-22

SFS-EN 60958-4/A1 Digital audio interface. Part 4: Professional applications 2009-06-22

SFS-EN 60966-3 Radio frequency and coaxial cable assemblies. Part 3: Sectional specification for semi-flexible coaxial cable assemblies

2009-10-12

SFS-EN 60966-3-1 Radio frequency and coaxial cable assemblies. Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

2009-10-12

SFS-EN 60974-8 Arc welding equipment. Part 8: Gas consoles for welding and plasma cutting systems

2009-10-12

SFS-EN 61000-3-3 Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection

2009-06-22

SFS-EN 61000-4-3/A1 Electromagnetic compatibility (EMC). Part 4-3: Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test

2009-06-22

SFS-EN 61000-4-30 Electromagnetic compatibility (EMC). Part 4-30: Testing and measurement techniques. Power quality measurement methods

2009-06-22

SFS-EN 61008-1/A12 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s). Part 1: General rules

2009-10-12



SFS-EN 61009-1/A12 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s). Part 1: General rules

2009-10-12

SFS-EN 61009-1/A13 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s). Part 1: General rules

2009-10-12

SFS-EN 61023 Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance requirements, methods of testing and required test results

2009-04-20

SFS-EN 61039 Classification of insulating liquids 2009-02-16

SFS-EN 61051-1 Varistors for use in electronic equipment. Part 1: Generic specification 2009-02-16

SFS-EN 61073-1 Fibre optic interconnecting devices and passive components. Mechanical splices and fusion splice protectors for optical fibres and cables. Part 1: Generic specification

2009-10-12

SFS-EN 61076-2-101 Connectors for electronic equipment. Product requirements. Part 2-101: Circular connectors. Detail specification for M12 connectors with screw-locking

2009-06-22

SFS-EN 61076-2-104 Connectors for electronic equipment. Product requirements. Part 2-104: Detail specification for circular connectors with M8 screw-locking or snap-locking

2009-06-22

SFS-EN 61076-2-105 Connectors for electronic equipment. Product requirements. Part 2-105: Circular connectors. Detail specification for M5 connectors with screw-locking

2009-06-22

SFS-EN 61076-3 Connectors for electronic equipment. Part 3: Rectangular connectors. Sectional specification

2009-06-22

SFS-EN 61076-3-001 Connectors for electronic equipment. Product requirements. Part 3: Rectangular connectors. Blank detail specification

2009-06-22

SFS-EN 61076-3-110 Connectors for electronic equipment. Product requirements. Part 3-110: Rectangular connectors. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz

2009-06-22

SFS-EN 61076-3-116 Connectors for electronic equipment. Product requirements. Part 3-116: Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever

2009-06-22

SFS-EN 61095 Electromechanical contactors for household and similar purposes 2009-10-12

SFS-EN 61097-1 Global maritime distress and safety system (GMDSS). Part 1: Radar transponder. Marine search and rescue (SART). Operational and performance requirements, methods of testing and required test results

2009-04-20

SFS-EN 61109 Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria

2009-06-22

SFS-EN 61162-3 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Part 3: Serial data instrument network

2009-02-16

SFS-EN 61174 Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results

2009-10-12

SFS-EN 61184 Bayonet lampholders 2009-02-16



SFS-EN 61188-5-3 Printed boards and printed board assemblies. Design and use. Part 5-3: Attachment (land/joint) considerations. Components with gull-wing leads on two sides

2009-04-20

SFS-EN 61188-5-4 Printed boards and printed board assemblies. Design and use. Part 5-4: Attachment (land/joint) considerations. Components with J leads on two sides

2009-04-20

SFS-EN 61188-5-5 Printed boards and printed board assemblies. Design and use. Part 5-5: Attachment (land/joint) considerations. Components with gull-wing leads on four sides

2009-04-20

SFS-EN 61190-1-2 Attachment materials for electronic assembly. Part 1-2: Requirements for solder pastes for high-quality interconnections in electronics assembly

2009-04-20

SFS-EN 61190-1-3 Attachment materials for electronic assembly. Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications

2009-04-20

SFS-EN 61192-5 Workmanship requirements for soldered electronic assemblies. Part 5: Rework, modification and repair of soldered electronic assemblies

2009-04-20

SFS-EN 61193-2 Quality assessment systems. Part 2: Selection and use of sampling plans for inspection of electronic components and packages

2009-04-20

SFS-EN 61249-2-35 Materials for printed boards and other interconnecting structures. Part 2-35: Reinforced base materials; clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

2009-10-12

SFS-EN 61249-2-36 Materials for printed boards and other interconnecting structures. Part 2-36: Reinforced base materials; clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

2009-10-12

SFS-EN 61249-2-37 Materials for printed boards and other interconnecting structures. Part 2-37: Reinforced base materials; clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

2009-10-12

SFS-EN 61249-2-38 Materials for printed boards and other interconnecting structures. Part 2-38: Reinforced base materials; clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly

2009-10-12

SFS-EN 61274-1-1 Adaptors for fibre optic connectors. Part 1-1: Blank detail specification 2009-04-20

SFS-EN 61280-2-2 Fibre optic communication subsystem test procedures. Part 2-2: Digital systems. Optical eye pattern, waveform and extinction ratio measurement

2009-02-16

SFS-EN 61280-2-9 Fibre optic communication subsystem basic test procedures. Part 2-9: Digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

2009-10-12

SFS-EN 61290-3 Optical amplifiers. Test methods. Part 3: Noise figure parameters 2009-02-16

SFS-EN 61290-3-2 Optical amplifiers. Test methods. Part 3-2: Noise figure parameters. Electrical spectrum analyzer method

2009-02-16

SFS-EN 61290-10-1 Optical amplifiers. Test methods. Part 10-1: Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer

2009-10-12

SFS-EN 61290-11-1 Optical amplifiers. Test methods. Part 11-1: Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME)

2009-02-16



SFS-EN 61291-4 Optical amplifiers. Part 4: Multichannel applications. Performance specification template

2009-02-16

SFS-EN 61291-6-1 Optical amplifiers. Part 6-1: Interfaces. Command set 2009-02-16

SFS-EN 61298-1 Process measurement and control devices. General methods and procedures for evaluating performance. Part 1: General considerations

2009-06-22

SFS-EN 61298-2 Process measurement and control devices. General methods and procedures for evaluating performance. Part 2: Tests under reference conditions

2009-06-22

SFS-EN 61298-3 Process measurement and control devices. General methods and procedures for evaluating performance. Part 3: Tests for the effects of influence quantities

2009-06-22

SFS-EN 61298-4 Process measurement and control devices. General methods and procedures for evaluating performance. Part 4: Evaluation report content

2009-06-22

SFS-EN 61300-2-2 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-2: Tests. Mating durability

2009-10-12

SFS-EN 61300-2-44 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-44: Tests. Flexing of the strain relief of fibre optic devices

2009-02-16

SFS-EN 61300-2-48 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-48: Tests. Temperature-humidity cycling

2009-10-12

SFS-EN 61300-3-2 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-2: Examinations and measurements. Polarization dependence loss in a single-mode fibre optic device

2009-10-12

SFS-EN 61300-3-3 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-3: Examinations and measurements. Active monitoring of changes in attenuation and return loss

2009-10-12

SFS-EN 61300-3-6 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-6: Examinations and measurements. Return loss

2009-10-12

SFS-EN 61300-3-34 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-34: Examinations and measurements. Attenuation of random mated connectors

2009-10-12

SFS-EN 61300-3-43 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-43: Examinations and measurements. Mode transfer function measurement for fibre optic sources

2009-10-12

SFS-EN 61314-1 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Part 1: Generic specification

2009-10-12

SFS-EN 61347-2-10/A1 Lamp controlgear. Part 2-10: Particular requirements for electronic invertors and convectors for high-frequency operation of cold start tubular discharge lamps (neon tubes)

2009-06-22

SFS-EN 61400-21 Wind turbines. Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

2009-02-16

SFS-EN 61400-25-4 Wind turbines. Part 25-4: Communications for monitoring and control of wind power plants. Mapping to communication profile

2009-02-16



SFS-EN 61467 Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests

2009-06-22

SFS-EN 61477 Live working. Minimum requirements for the utilization of tools, devices and equipment

2009-10-12

SFS-EN 61496-1/A1 Safety of machinery. Electro-sensitive protective equipment. Part 1: General requirements and tests

2009-02-16

SFS-EN 61512-3 Batch control. Part 3: General and site recipe models and representation 2009-02-16

SFS-EN 61534-22 Powertrack systems. Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation

2009-10-12

SFS-EN 61557-9 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 9: Equipment for insulation fault location in IT systems

2009-10-12

SFS-EN 61557-11 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems

2009-10-12

SFS-EN 61558-1/A1 Safety of power transformers, power supplies, reactors and similar products. Part 1: General requirements and tests

2009-10-12

SFS-EN 61558-2-4 Safety of power transformers, power supply units and similar products for supply voltages up to 1 100 V. 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

2009-10-12

SFS-EN 61558-2-13 Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V. Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

2009-10-12

SFS-EN 61606-3 Audio and audiovisual equipment. Digital audio parts. Basic measurements methods of audio characteristics. Part 3: Professional use

2009-06-22

SFS-EN 61643-21 Low voltage surge protective devices. Part 21: Surge protective devices connected to telecommunications and signalling networks. Performance requirements and testing methods

2009-10-12

SFS-EN 61646 Thin-film terrestrial phovoltaic (PV) modules. Design qualification and type approval

2009-04-20

SFS-EN 61649 Weilbull analysis 2009-04-20

SFS-EN 61676/A1 Medical electrical equipment. Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology

2009-10-12

SFS-EN 61730-1 Photovoltaic (PV) module safety qualification. Part 1: Requirements for construction

2009-04-20

SFS-EN 61730-2 Photovoltaic (PV) module safety qualification. Part 2: Requirements for testing

2009-04-20

SFS-EN 61753-031-3 Fibre optic interconnecting devices and passive components performance standard. Part 031-3: Non-connectorized single mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for category U. Uncontrolled environment

2009-10-12

SFS-EN 61753-101-3 Fibre optic interconnecting devices and passive components performance standard. Part 101-3: Fibre management systems for category U. Uncontrolled environment

2009-02-16

SFS-EN 61754-25 Fibre optic connector interfaces. Part 25: Type RAO connector family 2009-10-12



SFS-EN 61755-3-1 Fibre optic connector optical interfaces. Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre

2009-06-22

SFS-EN 61755-3-2 Fibre optic connector optical interfaces. Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres

2009-06-22

SFS-EN 61755-3-7 Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part 3-7: Optical interface 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode

2009-10-12

SFS-EN 61755-3-8 Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre

2009-06-22

SFS-EN 61758-1 Fibre optic interconnecting devices and passive components. Interface standard for closures. Part 1: General and guidance

2009-02-16

SFS-EN 61760-2 Surface mounting technology. Part 2: Transportation and storage conditions of surface mounting devices (SMD). Application guide

2009-04-20

SFS-EN 61770 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets

2009-10-12

SFS-EN 61834-11 Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). Part 11: HDV format for 1080i and 720p systems

2009-06-22

SFS-EN 61850-7-420 Communication networks and systems for power utility automation. Part 7-420: Basic communication structure. Distributed energy resources logical nodes

2009-10-12

SFS-EN 61857-1 Electrical insulation systems. Procedures for thermal evaluation. Part 1: General requirements. Low-voltage

2009-06-22

SFS-EN 61857-22 Electrical insulation systems. Procedures for thermal evaluation. Part 22: Specific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS)

2009-02-16

SFS-EN 61858 Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS

2009-02-16

SFS-EN 61883-8 Consumer audio/video equipment. Digital interface. Part 8: Transmission of ITU-R BT.601 style digital video data

2009-06-22

SFS-EN 61914 Cable cleats for electrical installations 2009-10-12

SFS-EN 61935-2 Testing of balanced communication cabling in accordance with ISO/IEC 11801. Part 2: Patch cords and work area cords

2009-08-17

SFS-EN 61952 Insulators for overhead lines. Composite line post insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria

2009-06-22

SFS-EN 61967-6/A1 Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Part 6: Measurement of conducted emissions. Magnetic probe method

2009-06-22

SFS-EN 61968-13 Application integration at electric utilities. System interfaces for distribution management. Part 13: CIM RDF Model Exchange Format for Distribution

2009-06-22

SFS-EN 61970-402 Energy management system application program interface (EMS-API). Part 402: Common services

2009-06-22

SESKOn alueelta julkaistut ja vahvistetut SFS-standardit 2009 21


SFS-EN 61970-403 Energy management system application program interface (EMS-API). Part 403: Generic data access

2009-06-22

SFS-EN 61970-453 Energy management system application program interface (EMS-API). Part 453: CIM based graphics exchange

2009-06-22

SFS-EN 62002-1 Mobile and portable DVB-T/H radio access. Part 1: Interface specification 2009-06-22

SFS-EN 62002-2 Mobile and portable DVB-T/H radio access. Part 2: Interface conformance testing

2009-06-22

SFS-EN 62007-1 Semiconductor optoelectronic devices for fibre optic system applications. Part 1: Specification template for essential ratings and characteristics

2009-06-22

SFS-EN 62007-2 Semiconductor optoelectronic devices for fibre optic system applications. Part 2: Measuring methods

2009-10-12

SFS-EN 62024-2 High frequency inductive components. Electrical characteristics and measuring methods. Part 2: Rated current of inductors for DC to DC converter

2009-06-22

SFS-EN 62026-3 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). Part 3: DeviceNet

2009-10-12

SFS-EN 62031 LED modules for general lighting. Safety specifications 2009-02-16

SFS-EN 62040-1 Uninterruptible Power Systems (UPS). Part 1: General and safety requirements for UPS

2009-04-20

SFS-EN 62059-31-1 Electricity metering equipment. Dependability. Part 31-1: Accelerated reliability testing. Elevated temperature and humidity

2009-06-22

SFS-EN 62075 Audio/video, information and communication technology equipment. Environmentally conscious design

2009-06-22

SFS-EN 62108 Concentrator photovoltaic (CPV) modules and assemblies. Design qualification and type approval

2009-04-20

SFS-EN 62135-1 Resistance welding equipment. Part 1: Safety requirements for the design, manufacture and the installation

2009-02-16

SFS-EN 62137-1-1 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Part 1-1: Pull strength test

2009-04-20

SFS-EN 62137-1-2 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Part 1-2: Shear strength test

2009-04-20

SFS-EN 62137-1-3 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Part 1-3: Cyclic drop test

2009-10-12

SFS-EN 62137-1-4 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Part 1-4: Cyclic bending test

2009-10-12

SFS-EN 62137-1-5 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Part 1-5: Mechanical shear fatique test

2009-10-12

SFS-EN 62192 Live working. Insulating ropes 2009-10-12

SFS-EN 62220-1-3 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1-3: Determination of the detective quantum efficiency. Detectors used in Dynamic Imaging

2009-02-16

SFS-EN 62227 Multimedia home server systems. Digital rights permission code 2009-06-22

SFS-EN 62271-1 High-voltage switchgear and controlgear. Part 1: Common specifications 2009-06-22



SFS-EN 62271-100/A2 High-voltage switchgear and controlgear. Part 100: High-voltage alternating-current circuit-breakers

2009-10-12

SFS-EN 62271-109 High-voltage switchgear and controlgear. Part 109: Alternating-current series capacitor by-pass switches

2009-10-12

SFS-EN 62271-110 High-voltage switchgear and controlgear. Part 110: Inductive load switching

2009-10-12

SFS-EN 62271-201 High-vlotage switchgear and controlgear. Part 201: A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

2009-10-12

SFS-EN 62282-3-3 Fuel cell technologies. Part 3-3: Stationary fuel cell power systems. Installation

2009-04-20

SFS-EN 62282-6-200 Fuel cell technologies. Part 6-200: Micro fuel cell power systems. Performance test methods

2009-04-20

SFS-EN 62288 Maritime navigation and radiocommunication equipment and systems. Presentation of navigation-related information on shipborne navigational displays. General requirements, methods of testing and required test results

2009-02-16

SFS-EN 62310-3 Static transfer systems (STS). Part 3: Method of specifying the performance and test requirements

2009-02-16

SFS-EN 62317-14 Ferrite cores. Dimensions. Part 14: EFD-cores for use in power supply applications

2009-06-22

SFS-EN 62320-1/A1 Maritime navigation and radiocommunication equipment and systems. Automatic Identification Systems (AIS). Part 1: AIS Base Stations. Minimum operational and performance requirements, methods of testing and required test results

2009-10-12

SFS-EN 62321 Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)

2009-10-12

SFS-EN 62369-1 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz. Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems

2009-10-12

SFS-EN 62402 Obsolescence management. Application guide 2009-04-20

SFS-EN 62419 Control technology. Rules for the designation of measuring instruments 2009-06-22

SFS-EN 62420 Concentric lay stranded overhead electrical conductors containing one or more gap(s)

2009-04-20

SFS-EN 62421 Electronics assembly technology. Electronic modules 2009-04-20

SFS-EN 62428 Electric power engineering. Modal components in three-phase a.c. systems. Quantities and transformations

2009-02-16

SFS-EN 62429 Reliability growth. Stress testing for early failures in unique complex systems

2009-04-20

SFS-EN 62431 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency. Measurement methods

2009-06-22

SFS-EN 62439 High availability automation networks 2009-02-16

SFS-EN 62457 Multimedia home networks. Home network communication protocol over IP for multimedia household appliances

2009-06-22



SFS-EN 62460 Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations

2009-02-16

SFS-EN 62471 Photobiological safety of lamps and lamp systems 2009-02-16

SFS-EN 62494-1 Medical electrical equipment. Exposure index of digital X-ray imaging systems. Part 1: Definition and requirements of general radiography

2009-06-22

SFS-EN 62496-1 Optical circuit boards. Part 1: General 2009-10-12

SFS-EN 62503 Multimedia quality. Method of assessment of synchronization of audio and video

2009-06-22

SFS-EN 62535 Insulating liquids. Test method for detection of potentially corrosive sulphur in used and unused insulating oil

2009-06-22

SFS-EN 80000-14 Quantities and units. Part 14: Telebiometrics related to human physiology 2009-10-12

SFS-EN 80416-1 Basic principles for graphical symbols for use on equipment. Part 1: Creation of graphical symbols for registration

2009-10-12

SFS-EN 80601-2-58 Medical electrical equipment. Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

2009-06-22

SFS-EN 81714-2 Design of graphical symbols for use in the technical documentation of products. Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange

2009-04-20

SFS-EN 140401 Blank Detail Specification. Fixed low power film surface mount (SMD) resistors

2009-10-12

SFS-EN ISO 11145 Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols (ISO 11145:2006)

2009-03-09

SFS-EN ISO 11252 Lasers and laser-related equipment. Laser device. Minimum requirements for documentation (ISO 11252:2004)

2009-03-09

SFS-EN ISO 11553-1 Safety of machinery. Laser processing machines. Part 1: General safety requirements (ISO 11553-1:2005)

2009-03-09

SFS-EN ISO 11553-2 Safety of machinery. Laser processing machines. Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

2009-03-09

SFS-EN ISO 11554 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)

2009-03-09

SFS-EN ISO 11810-1 Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Part 1: Primary ignition and penetration (ISO 11810-1:2005)

2009-05-11

SFS-EN ISO 11810-2 Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers. Part 2: Secondary ignition (ISO 11810-2:2007)

2009-04-20

SFS-HD 21.3 S3/A2 PVC-eristeiset enintään 450/750 V johtimet ja kaapelit. Osa 3: Kiinteään asennukseen tarkoitetut eristetyt johtimet

2009-06-22


Standardit ja standardeja sisältävät SFS-käsikirjat ovat tärkeitä työkaluja varmistet-taessa sähköverkkojen ja -laitteiden turvallisuutta, toimivuutta ja yhteensopivuutta. Käsikirjan hankkiessaan saa laajankin standardisarjan osat edullisena pakettina.Vuodesta 2007 alkaen ovat sähkötekniikan SFS-käsikirjat 600-sarjaa.

SFS-käsikirja 10-2:1999 Sähkökaavioiden piirrosmerkit. Osa 2: Integroidut piirit

SFS-käsikirja 16:2003 Moottorikeskukset ja ohjelmoitavat ohjaukset. Vakiosovellutuksia enintään 1000 V moottorikäytöille

SFS-käsikirja 70-3:1998 Sähköteknisten tuotteiden dokumentointi. Osa 3: Dokumenttien luokittelu sekä tunnistaminen. Järjestelmät, laitteistot ja ohjausjärjestelmien sovellusohjelmat

SFS-käsikirja 135-1:2008 Koneiden sähkölaitteistot ja -järjestelmät. Osa 1: Yleiset turvallisuusstandardit

SFS-käsikirja 135-2:2009 Koneiden sähkölaitteistot ja -järjestelmät. Osa 2: Nostokoneet

SFS-käsikirja 150:2006 Staattinen sähkö. Ohjeita staattisen sähkön aiheuttamien vaarojen välttämiseksi

SFS-käsikirja 154:2005 Jakokeskukset

SFS-käsikirja 160:2003 Jäsentelyn periaatteet ja viitetunnukset

SFS-käsikirja 174-1:2006 Tekninen dokumentointi. Osa 1: Informaation jäsentely, dokumenttien luokittelu ja dokumenttien hallinta

SFS-käsikirja 174-2:2007 Tekninen dokumentointi. Osa 2: Signaalien tunnukset, liittimien tunnukset ja viitetunnusjärjestelmä

SFS-käsikirja 174-3:2008 Tekninen dokumentointi. Osa 3: Piirustusten, kaavioiden, osaluetteloiden ja ohjeiden laatiminen

SFS-käsikirja 175-1:2008 Automaatio. Osa 1: Sanasto, dokumentointi ja toiminnallinen turvallisuus

SFS-käsikirja 175-2:2006 Automaatio. Osa 2: Ohjelmointi ja teollisuusprosessien valvonta

SFS-käsikirja 177:2007 Pienjännitevarokkeiden soveltamisohje ja varokkeiden sekä pienjännitekytkinlaitteiden koordinaatio

SFS-käsikirja 180-1:2008 Kotitaloussähkölaitteiden ja vastaavien turvallisuus. Osa 1: Yleiset vaatimukset

SFS e-käsikirja 510:2004 Sähkökaavioissa käytettävät piirrosmerkit Korjaus 2006-08-07

SFS-käsikirja 600:2007 Pienjännitesähköasennukset ja sähkötyöturvallisuus

SFS-handbok 600:2008 Lågspänningselinstallationer och Säkerheten vid elarbeten

SFS-käsikirja 601:2009 Suurjännitesähköasennukset ja ilmajohdot

SFS-käsikirja 604-2:2009 Räjähdysvaaralliset tilat. Osa 2: Sähköasennukset, tarkastus ja huolto

SFS-käsikirja 606:2008 Sähköasennusten ja sähkölaitteiden turvallisuuteen liittyvät peruskäsitteet

SFS-käsikirja 608:2009 Valaistusstandardit

SFS-käsikirja 609:2009 Rakennusten ja rakenteiden salamasuojaus

SFS-käsikirja 620-1:2009 Sähköenergian mittaus. Osa 1: Lainsäädäntö, standardisointi ja perusstandardit

SFS-käsikirja 620-2:2009 Sähköenergian mittaus. Osa 2: Sähköenergiamittaristandardit

SFS-käsikirja 650:2009 Kaapeleiden käyttöohje

SFS-käsikirja 660:2008 EMC, Sähkömagneettinen yhteensopivuus

SFS-käsikirja 670-2:2009 Sähköinen talotekniikka. osa 2: Murto- ja ryöstöilmaisimien laitestandardit

Saatavana olevat, SESKOn valmistelemat SFS-käsikirjat


Sähkö- ja elektroniikka-alan standardointia varten SESKOlla on 46 standardointikomiteaa ja yli 80 seurantaryhmää. Mukana on yli 400 asiantuntijajäsentä. Komiteoilla on nimetty puheenjohtaja ja sihteeri ja ne kokoontuvat säännöllisesti. Kaikkien ryhmien työssä on tärkeää aktiivinen osallistuminen IEC:n ja CENELECin äänestyksiin, lausuntojen laatimiseen sekä työryhmätyöhön. Vaikutusmahdollisuus

Aktiivinen komiteajäsen voi vaikuttaa standardien sisältöön ja hyödyntää niiden valmisteluvaiheessa saamaansa tietoa edustamansa yrityksen liiketoiminnassa. SESKOn komiteoihin ja seurantaryhmiin pääsevät mukaan kaikki standardointityöstä kiinnostuneet.

Vuosimaksua vastaan pääsee seuraamaan standardointia sisäpiiristä ja saa muutkin alla esitetyt SESKON palvelut

Jäsenyys SESKOn kansallisessa standardointikomiteassa tai seurantaryhmässäMahdollisuus osallistua kansainvälisten ja eurooppalaisten komiteoiden kokouksiin sekä näiden työryhmien toimintaan Mahdollisuus hakea matka-avustusta kansainvälisiin komitea- ja työryhmäkokouksiin Käyttöoikeus IEC:n, CENELECin ja SESKOn dokumenttipalvelimiin Komitean toimialaan kuuluvat kansainväliset ja eurooppalaiset ehdotukset sekä suomenkieliset SFS-standardiehdotukset ja -standardit Eurooppalaisten standardien (EN/HD) ja vastaavien CENELEC-julkaisujen (TS, TR) lopulliset tekstit Asianomaiset IEC-standardit IEC:n seurantaryhmien yhdyshenkilöille SESKO -lehti ja sen erikoisnumero, SESKOn valmistelemien SFS-standardien vuosiluettelo SESKOn komitea- ja henkilöluettelo vuosittain.

•

•

•

•

•

•

•

•

•

SK 1 Terminologia SK 2 Sähkökoneet SK 3 Informaatiorakenteet, dokumentointi ja piirrossymboliikka SK 11 Suurjänniteilmajohdot SK 11X Ilmajohtotarvikkeet SK 13 Sähköenergian mittaus SK 17 Suurjännitekytkinlaitteet SK 17B Pienjännitekytkinlaitteet SK 17D Jakokeskukset SK 20 Energiakaapelit SK 22 Tehoelektroniikan järjestelmät ja laitteet SK 23 Pisto- ja rasiakytkimet sekä liitäntätarvikkeetSK 23A Johtotiet SK 31 Räjähdysvaarallisten tilojen sähkölaitteet SK 32B Pienjännitevarokkeet SK 34 Valaisimet SK 36 Eristimet SK 44 Koneturvallisuuden sähkötekniset näkökohdat SK 46 Metallijohtimiset tiedonsiirtokaapelit SK 48 Elektroniikkaliittimet SK 56 Luotettavuustekniikka SK 61 Kotitaloussähkölaitteiden turvallisuus SK 61Z Sähkökiukaat ja saunatilojen asennukset SK 62 Sairaalasähkötekniikka SK 64 Pienjännitesähköasennukset SK 65 Teollisuusprosessien ohjaus SK 69 Sähköautot ja latausjärjestelmätSK 77 Sähkömagneettinen yhteensopivuus (EMC) SK 78 Jännitetyöt SK 79 Hälytysjärjestelmät SK 86 Kuituoptiikka SK 91 Elektroniikan kokoonpanotekniikka SK 93 Suunnittelun automatisointi SK 99 Suurjänniteasennukset SK 100 Yhteisantennilaitteet SK 101 Staattinen sähkö (ESD) SK 104 Ympäristöluokitus ja -testaus SK 106 Altistuminen sähkömagneettisille kentille SK 108 Tietotekniikan ja viihde-elektroniikan laitteiden turvallisuus SK 111 Sähkö- ja elektroniikkalaitteiden ympäristönäkökohdat SK 116 Sähkötyökalut SK 205 Rakennusten elektroniikkajärjestelmät SK 215 Tietoliikennelaitteiden sähkötekniset näkökohdat SK CISPR Radiohäiriöt (EMC) SK CEN 169 Valaistustekniikka

Vaatimustenmukaisuus ja direktiivit -neuvottelukunta

SESKOn komiteat ja työryhmät


SESKOn henkilöstö vastuualueineen

Nimi Puhelinnumero (suora ja GSM)

Vastuualueet

Sinikka Hieta-Wilkman toimitusjohtaja

09 6963 951, 040 502 8949

Hallinto- ja talousasiatSESKO, SFS, TSK

Tinni Karakorpi viestintäpäällikkö

09 6963 957, 040 576 5088

Viestintä ja markkinointi, SESKO-lehti

Jari Karjalainen ryhmäpäällikkö

09 6963 959, 050 4679 198

Energiakaapelit, kytkinlaitteet, ilmajohtotarvikkeet, jännitetyövälineet, sähkötyökalut, varokkeet

Sanna Koivu ryhmäpäällikkö

09 6963 960, 045 657 8660

Koneiden sähköjärjestelmät ja merkinnät, koneturvallisuus, lääkintälaitteet, EMF, sähköautot ja latausjärjestelmät, teollisuusautomaatio

Marva Metsänoja talous- ja asiakaspalvelupäällikkö

09 6963 956, 045 657 9969

Laskutus, käyttäjätunnukset, Suomessa pidettävien kansainvälisten standardointikokousten järjestelyt

Tapani Nurmi tekninen johtaja

09 6963 961, 050 357 0380

Sähköasennukset, ilmajohdot, jakokeskukset, räjähdysvaaralliset tilat, sähkötyöturvallisuus

Arto Sirviö ryhmäpäällikkö

09 6963 954, 040 525 5040

Dokumentointi, rakennusten elektroniikka- järjestelmät, hälytysjärjestelmät

Eero Sorri ryhmäpäällikkö

09 6963 953, 0400 127 892

Tietotekniikka- ja multimedialaitteet, tietoliikenneverkot, EMC, ESD, valaistus

Pirkko Taavitsainen toimitusjohtajan sihteeri

09 6963 955, 045 657 8861

IEC ja CENELEC-dokumenttien käsittely

Juha Vesa ryhmäpäällikkö

09 6963 958, 045 657 8661

Akut, asennustarvikkeet, AV/IT-laitteiden turvallisuus, kotitalouslaitteet, sähköautot ja latausjärjestelmät, valaisimet, mittaustekniikka, ympäristöasiat, sertifiointi

Henkilöstön sähköpostiosoitteet ovat muotoa: etunimi.sukunimi(at)sesko.fi

SESKOn toimistoPuhelinvaihde: 09 6963 91 • Faksi: 09 677 059 • Sähköposti: [email protected] Postiosoite: SESKO, PL 134 (Särkiniementie 3), 00211 Helsinki • Internet: www.sesko.fi

Standardien tilaukset

IEC- ja CENELEC-standardien tilaukset SESKO

p. 09 6963 970f. 09 677 059

sähköposti: [email protected]

SFS-standardit,Suomen Standardisoimisliitto SFS ry.

p 09 1499 3353f. 09 1464 4925

sähköposti: [email protected]

www.sesko.fi


SESKOn 45- vuotisjuhlaseminaari 2010Keskiviikko 31. maaliskuuta 2010 klo 12.30 – 16.15 ( - 18.30) Pörssitalo, Fabianinkatu 14, HELSINKI 10

Ohjelma 12.30 Ilmoittautuminen

13.00 Tilaisuuden avaus SESKOn hallituksen puheenjohtaja Kimmo Saarinen Evox Rifa Group Oyj (KEMET)

13.20 Kansainvälinen yhteistyö IEC:n puheenvuoro

13.40 Eurooppalainen ja pohjoismainen yhteistyö CENELEC- / NOREK-puheenvuoro

14.00 Kahvi

14.30 Matkustajan turvallisuus: turvallisesti matkalla – terveenä kotiin Kouluttaja Totti Karpela, Mielenrauha Oy

15.20 Standardien taikaa – standardointitaikuutta Viihdetaiteilija Martti Vannas, Oy Martti Vannas Ab

15.45 Erkki Yrjölä –mitalit ja kunniajäsenyys

16.15 Buffet

18.30 Tilaisuus päättyy

TERVETULOA

Seminaari on kutsutilaisuus ja tarkoitettu SESKOn jäsenyhteisöjen ja yhteistyökumppaneiden edustajille sekä kaikille SESKOn standardisoimiskomiteoiden ja seurantaryhmien jäsenille.

Ilmoittautumiset viimeistään 24.3.2010 Pirkko Taavitsaiselle, [email protected] tai puhelimitse (09) 6963 955.

Yhteistyöllä parempia standardeja

4 5 v u o t t as ä h k ö a l a n standardeja

1 9 6 5 – 2 0 1 0

SESKO ryPL 134 Särkiniementie 300211 Helsinki

.Y275

M

UUDET VAHVISTETUT JA JULKAISTUT STANDARDIT

Tam

mik

uu 2

010_

Tik

IEC-standardit sähköisinä SESKOsta

SESKO välittää IEC-standardeja sähköisesti pdf-muodossa joko sähköpostilla tai CD-ROM levyllä. Vanhat standardit ovat image-kuvina, joissa ei ole hakumahdollisuutta. Uudet standardit ovat hakukelpoisina pdf-versioina. Hinta on sama kuin painetuilla IEC-standardeilla. Tilaukset p: 09 696 3970, faksi: 09 677 059, sähköposti: [email protected].

Lisäksi voit tilata seuraavia tuotteita:

CENELEC-standardit.IEC:n ja CENELECin työpaperit. Catalogue of IEC Publications, päivitettävissä CD-levynä 40,76 €. CENELEC Catalogue, kahtena CD-levynä 70 €.. Mainitut hinnat ovat verottomia, alv 22 %. Toimitusmaksu 7 €/lähetys. IEC Cataloguen toimitusmaksu on 15 €.

Koulutusmateriaali

Perustietoa sähkö- ja elektroniikka-alan standardisoimistyöstä ja standardien valmistelusta saat kotisivultamme Ohjeita/Koulutusmateriaali -osasta. Jos tarvitset esityksiä PowerPoint-muodossa, voit pyytää niitä SESKOsta [email protected]. tai puhelimitse 09 696 3970. Esityksiä saa käyttää vapaasti ja niitä saa tarvittaessa muokata.

Mukaan komiteatyöskentelyyn?

SESKOn komiteoiden työhön osallistuminen on avointa kaikille asiasta kiinnostuneille. Komitean jäsenyys avaa mahdollisuuden seurata ja vaikuttaa myös kansainvälisten IEC- ja eurooppalaisten CENELEC-standardien sisältöön. Komiteajäsenyydestä peritään vuosittainen osallistumismaksu. Tietoa sähköalan standardisoimistyöhön osallistumisesta löydät SESKOn verkkosivuston otsikon ”Ohjeita” alta.

Tutustu kotisivuihimme: www.sesko.fi

SFS-käsikirjat ja standardit SFS:n asiakaspalvelusta, p. 09 149 93353, sähköposti: [email protected]

www.sesko.fi/Ajankohtaista/Uudet SFS-standarditSFS-standardeja myy Suomen Standardisoimisliitto SFS, p. 09 149 93353, faksi 09 146 4914, sähköposti: [email protected], http://sales.sfs.fi

www.sesko.fi/Ajankohtaista/Uudet IEC-standarditIEC-standardeja myy SESKO ry, PL 134, 00211 Helsinki, p. 09 696 3970, faksi 09 677 059, sähköposti: [email protected]

www.sesko.fi/Ajankohtaista/Uudet EN-standarditCENELEC-standardeja myy SESKO ry, PL 134, 00211 Helsinki, p. 09 696 3970, faksi 09 677 059, sähköposti: [email protected]

Uusien julkaistujen ja vahvistettujen SFS-, IEC- ja CENELECin EN-standardien nimet ja tunnukset löytyvät standardointijärjestöjen kotisivuilta.

SFS-STANDARDIT 2009 SESKOn alueelta · IEC/TR 62513 Koneturvallisuus. Suuntaviivat tietoliikennejärjestelmien käyttämiseen turvallisuuteen liittyvissä sovelluksissa 2009-05-25

Documents