Set-up and fixing instructions for BLS in North Kensington Lukas Pauscher Paul Smith 17.06.2011
Dec 30, 2015
Trellick Tower (transmitter)
Trellick Tower, 5 Golborne Rd, London, UK
Site access: Adrian Bowman (TMO), Tel: 07866 448413, [email protected]
Trellick Tower (transmitter)
BLS mounted hereon ‘main roof’
This side only needs to be visited if- the transmitter fails (e.g. Power cut)- the transmitter gets miss-aligned- please consult BLS manual for alignment - make sure the BLS measures on the highest frequency (diode in the back of the BLS is on constant light)
Dartrey Tower (receiver)
Keys for Dartrey Tower temporarily at King’s College
World's End Estate, Kensington, London
Location of BLS receiver1 level below top floorLift access
Top floorLift accessclimb 2 ladders to get to Davis station
Location of Davis Station
Dartrey Tower
Communications Dartrey TowerBack-up plus raw data driveDavis logging station
Signal processing unit (SPU)UTM Router
BLS data transferSPU-111-125IP: 192.168.2.2
Davis logging station
Roof 16aIP: 192.168.2.103Router IP: 192.168.2.1
C:\BLS\data\YYYY-MM-DD.mndYYYY-MM-DD.dgnYYYY-MM-DD.rawYYYY-MM-DD.log
C:\BLS\backup\YYYY-MM-DD.mndYYYY-MM-DD.dgnYYYY-MM-DD.rawYYYY-MM-DD.log
upload.bat
\\Scintillometer\BLSYYYY-MM-DD.mndYYYY-MM-DD.dgnYYYY-MM-DD.logYYYYMMDD_davis.zip
FTP:IP: 137.73.24.1
C:\Cumulus\currentconditions.txt- updated every 2 sec
C:\davis\davis_outdata\
YYYYMMDD_davis.txt- updated every second
C:\davis\davis_outdata\zip\YYYYMMDD_davis.zip
Data files:YYYY-MM-DD.mndYYYY-MM-DD.dgnYYYY-MM-DD.rawYYYY-MM-DD.log
OTAGO
copy_line.bat
davis_zip.bat
grab_BLS_file.bat
Cumuls
upload.bat
upload_davis.bat
daily file grab
\\ YYYY\NDT\BLS\Daily\mm\mnd\YYYY-MM-DD.mnddgn\YYYY-MM-DD.dgnlog\YYYY-MM-DD.log
\\ YYYY\DDT\Davis2\mm\ YYYYMMDD_davis.zip
databridge1\\data\YYYY\London\L0\NDT\DAY\DD\
BLS_NDT_YYYYDOY_1min.ncDAVIS_NK_YYYYDOY_1min.ncDAVIS_NK_YYYYDOY_15min.ncDAVIS_NK_YYYYDOY_30min.nc
Troubleshooting
Always take the keys for the Zarges boxes before you leave to Dartrey or Trellick tower!
Connection of Laptop to SPU is interrupted:• The Hard drive of the SPU has to be reconnected:
Start SRUN click button Connect and use SPU-111-125 In the menu click on Tools and then Browse Files on device
• You now should be able to open the drive from my computer• If you have to remap the drive on the SPU use IP: 192.168.2.2• This has to be done every time the computer or the SPU was restarted or
the network connection of either has been disconnected