SESSION: DEICER MANAGEMENT SOLUTIONS June 18, 2014, 2:30pm. Track B OVERVIEW OF CHAPTER 8, WINTER OPERATIONS AND SALT, SAND, AND CHEMICAL MANAGEMENT OF THE NCHRP REPORT 25-25(04) Xianming Shi, Montana State University EVALUATION OF SALT-RICH BIOCHAR AS A ROADWAY DE- ICING AGENT IN SUPPORT OF THE RECYCLING OF APPLIED ROAD SALTS THROUGH PHYTOREMEDIATION AND BIO-FUEL PRODUCTION Andy Alden, Virginia Tech Transportation Institute (VTTI) SALT MANAGEMENT RESEARCH IN VIRGINIA Jimmy White, Virginia Center for Transportation Innovation & Research
50
Embed
SESSION: DEICER MANAGEMENT SOLUTIONS June 18, 2014, 2:30pm. Track B
SESSION: DEICER MANAGEMENT SOLUTIONS June 18, 2014, 2:30pm. Track B. OVERVIEW OF CHAPTER 8, WINTER OPERATIONS AND SALT, SAND, AND CHEMICAL MANAGEMENT OF THE NCHRP REPORT 25-25(04). Xianming Shi, Montana State University. - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SESSION: DEICER MANAGEMENT SOLUTIONS June 18, 2014, 2:30pm. Track B
OVERVIEW OF CHAPTER 8, WINTER OPERATIONS AND SALT, SAND, AND CHEMICAL MANAGEMENT OF THE NCHRP REPORT 25-25(04)
Xianming Shi, Montana State UniversityEVALUATION OF SALT-RICH BIOCHAR AS A ROADWAY DE-ICING AGENT IN SUPPORT OF THE RECYCLING OF APPLIED ROAD SALTS THROUGH PHYTOREMEDIATION AND BIO-FUEL PRODUCTIONAndy Alden, Virginia Tech Transportation Institute (VTTI)
SALT MANAGEMENT RESEARCH IN VIRGINIA Jimmy White, Virginia Center for Transportation Innovation & Research
SESSION: DEICER MANAGEMENT SOLUTIONS Overview of Chapter 8, Winter Operations and Salt, Sand, and Chemical Management of the NCHRP Report 25-25(04
Xianming Shi, Montana State University
The Revised Chapter 8 presents information on recommended practices and strategic planning for reduced salt usage, highlights innovative DOT practices and programs that achieved reductions or improved environmental outcomes. Specific topics covered include:
• Basic information on the most commonly used snow and ice control materials, their impacts on the environment, and public concerns on the use of these products.
• Strategic planning and stewardship practices that can be used to reduce snow and ice material usage, such as anti-icing, utilizing available pavement and weather information, etc.
• Precision application methods and material distribution systems.
• The importance of record keeping and monitoring, management at winter operations facilities, and appropriate training of winter maintenance personnel.
This work also provides research recommendations to address knowledge gaps or areas with limited or little research on the topics discussed in Revised Chapter 8.
Research Interests1. Durability of civil infrastructure: understanding, preventing or mitigating the impact of service environment on metals, concrete, asphalt and structures (e.g., corrosion monitoring system, high performance coatings, preservation and maintenance techniques for pavements, and rehabilitation techniques for bridge decks).2. Environmental sustainability: with a focus on the use of nanotechnology, green technology, and beneficial microorganisms for: environmentally friendly concrete, advanced cementitious materials, eco-friendly asphalt, green buildings, and environmental preservation3. Sustainable transportation systems engineering, especially products, technologies, and systems to facilitate environmentally responsible best practices in road weather management, snow and ice control, dust suppression, and other maintenance activities.4. New energy technologies: microbial fuel cells, energy harvesting, advanced functional materials, etc.
Minimizing the Environmental Footprint of Winter Highway
OperationsXianming Shi, PhD, PE, Research Professor
A PRESENTATION AT 2014 TRB COMMITTEE ADC60SUSTAINABLE & RESILIENT INFRASTRUCTURE WORKSHOP
NEW YORK CITY, JUNE 18, 2014
Revised Chapter 8,Winter Operations and Salt, Sand & Chemical Management
, of the Final Report NCHRP 25-25(04) Environmental Stewardship Practices, Procedures, and Policies for Highway
Construction and MaintenanceMy coauthors: Laura Fay, Laura Fay, Michelle Akin,
• Sustained economic productivity, continued emergency services, …
1a. WM in the U.S.
• > 70% roads, 70% population • Hwys: 2.3 $bln/yr + 5 $bln/yrMnDOT Case Study:• (4,600 crashes)= 29% ↓• $10.9M in travel time savings• $48.4M in user fuel savings• Total $227M saved, b/c of 6.2• Intangible benefits
Ye, Z., Veneziano, D., Shi, X. Transportation Research Record, 2013, 2329: 17.Ye, Z., ..., Shi, X. Transportation Research Record, 2014, in press.Fay, L., Veneziano, D., Ye, Z., Williams, D., Shi. X. Transportation Research
Record 2010, 2169: 174.
1b. Emerging Challenge
s
Shi, X. Journal of Public Works & Infrastructure 2010, 2(4): 318.
1c. Impacts of Salt & Other Deicers
www.witnerservices.net
www.ci.bellevue.wa.us
Photo courtesy of M. Mills
www.clf.org
www.modot.org
www.syracuse.com
www.miissoulanews.bigskypress.com
1d. Impacts of Salt & Other Deicers (cont’d)
Fay, L., Shi, X. ASCE Journal of Cold Regions Engineering 2011, 25(3): 89.Shi, X., et al. Cold Regions Sci. Eng. 2013, 86: 36; Corrosion Reviews 2010,
28(3-4): 105. Corrosion Reviews 2009, 27(1-2): 23. Materials & Structures 2010, 43(7): 933. Construction & Building Materials 2011, 25(2): 957.ASCE Journal of Materials in Civil Engineering, 2012, 24(7): 805.
Pan, T., He, X., Shi, X. Journal of the Association of Asphalt Paving Technologists (AAPT) 2008, 77: 773.
3c. Salt Matrix & Pre-set Spreader Application Rates
• Goal: Reduce application rates while maintaining same LOS
• Considers: pavement temp., heating/cooling trends, road condition at time of service, available maintenance strategies
• Provides: recommended application rates for liquid and solid for initial & subsequent treatments on reference sheets– 4 storm scenarios (light, moderate, & heavy snow,
freezing rain)– Drivers use their judgment to make decisions
Kentucky Department of Highways
4. Proactive Stewardship Practices for Reducing Salt,
• Monitor road surface product concentration• On-vehicle, embedded, or non-contact• Accurate/recalibrated application rates• Link measurements with automatic spreader
controls• Benefits:
– Prevents over-application, saves material & $$$
Salinity sensors have been used to make educated decisions about reapplication (Ye et al., 2012).
4f. Road Weather Management Decision Support
– Cost & material savings, benefit/cost: 1.33 to 8.67, less use of vehicles
– Lessons learned: time needed to refine forecast & get management on board, continued training & exposure
Tools that integrate road weather forecasts, coded maintenance rules of practice, resource data to provide recommended treatment strategies (FHWA 2011)
4g. MDSS
4h. Improved Weather
Forecasts
Strong, C.K., Ye, Z., Shi, X. Safety Effects of Winter Weather: The State of Knowledge and Remaining Challenges. Transport Reviews 2010, 30(6), 677-699.
Ye, Z., Shi, X., Strong, C.K., Greenfield, T. H. Evaluation of the Effects of Weather Information on Winter Maintenance Costs. Transportation Research Record 2009, 2107, 104-110.
Strong, C., Shi, X. Benefit-Cost Analysis of Weather Information for Winter Maintenance: A Case Study. Transportation Research Record 2008, 2055, 119-127.
n • Is a must• Train how to calibrate & keep records• When to calibrate:
– when first acquired– points throughout a season– whenever a new material is used– after repairs– if there appears to be discrepancy in
material usage
6. Monitoring & Keeping Records• Determine your baseline• Use collected data to find trends• Consider tracking:
– Total length of road– Winter severity rating– Number of events– Material used– Calibration dates– Treatment effectiveness
7. WM Facility Management
7a. Material Storage• All products should be stored in a manner
to minimize any loss of product
www.syracuse.com
7b. Management of Snow Disposal Sites
• If moving snow to a melting location:– Minimize impacts (dust, litter, etc.)– Manage meltwater to comply with local water
quality regulations– Routinely monitoring of site capacity, soil &
water
The most effective way to dispose of snow is to let it melt where it accumulates.
8. Training for Salt Management & WM Operations
• Assess the needs of your staff• Consider who is being trained & how to
best convey that info• Design training based on learning goals• Training methods:
– Classroom, field, post-storm debriefing, simulator, etc.
8a. Training Continued…• Have experienced staff conduct the training• Evaluate your training program• Assess how much information was learned• Common training methods:
– Annual operator training, Snow University, Snow & Ice Rodeo, Computer Based Training (CBT)
www.capitalbay.com www.triblocal.com
9. Concluding RemarksWHAT: deliver the right type & amount of materials in the right location at the right timeWHY: effectiveness & efficiency of winter operations material usage, $$$, environmental footprint
HOW to balance LOS vs. sustainability: best practice in technology & management domains
Shi, X., et al. Cold Regions Science and Technology, 2013, 86: 104.
Acknowledgements
• AASHTO Standing Committee on Highways
• Caleb Dobbins• William Hoffman• Steve Lund• Debra Nelson• Wilfrid Nixon• Max Perchanok
• Gabriel Guevara• Leland Smithson• Frank Lisle• Amir Hanna• Annette Dunn• Monty Mills• Michael Williams• Brian Burn
Contact InfoXianming Shi, Ph.D., P.E., Research Professor
Manager, Winter Maintenance & Effects ProgramWestern Transportation Institute, PO Box 174250, Bozeman,
– ¾ in salt allowed but smaller grains work better.– Start with a heavier application, followed by smaller– Some equipment has worked better than others
• Pumps, on board crushers, overall equipment design/functionality
• Material and cost savings (Maine DOT 2005)• Anecdotal comments:
– Goes into action quicker, acts immediately, lasts longer on road, out-perform traditional pre-wetting methods, minimizes bounce and scatter.
• Winter Operations Performance Measures– Mobility, reliability, accessibility, safety– Example: time to bare lane– Measured as: return to speed, friction, visual
inspection, etc.
www.pbase.com
A Look to the Future• Technological & institutional barriers remain• Micro-scale road wx forecasting and sensing• ‘dynamic layer’ on the road surface: timing & freq.• More integrated & automated onboard sensors +
VII• Performance measures + systematic approach to
decision making in materials selection• Ultimate integration into the WM toolbox:
continued investment & efforts in R&D + user-needs driven product strategies