SERVICE PARTS MANUAL2 PARTS LIST INTRODUCTION Our dealership network stands by to provide you with any assistance you may require, including genuine Sno-Way service parts.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
97101511F
SERVICE PARTS MANUAL
MEGABLADETM V-WINGTM SERIESSNOW PLOW
WITH SERIAL NUMBER BEFOREMBV101000
Sno-Way®, Down Pressure® and EIS® are registered trademarks of Sno-Way International, Inc.ProControl™, MegaBlade™, V-Wing™, E-Z Switch™, Revolution™, MaxAdjust™, SpeedLock™, and QuickJack™
NUMERICAL INDEX ................................................................................................. 17
2
PARTS LIST INTRODUCTIONOur dealership network stands by to provide you with any assistance you may require, including genuine Sno-Wayservice parts. All parts should be obtained from or ordered through your dealer. Give complete information about thepart as well as the Model Number and Serial Number of your machine.
Record the Serial Number in the space provided in your Owner’s Manual for quick reference. The Serial Number for theunit is on a plate located on the left frame gusset of the Hopper Frame.
"Right" and "Left" are determined from a position sitting on the Operators Seat of the vehicle.
We reserve the right to make changes or improvements in the design or construction of any part without incurring theobligation to install such changes in any unit previously delivered.
Below is parts listing with four columns. The first column is the "ITEM", the second is the "PART NUMBER", The third isthe "DESCRIPTION" and the fourth is the "QUANTITY".
The "ITEM" is the number used in the corresponding illustration.
The "PART NO." Is the number used to order replacement parts. If a number does not appearin the column the part is only available by ordering the complete assembly.
The "DESCRIPTION" is the name of the replacement part. At times the namemay be indented, this means that the indented parts are part of the preceding assembly.
The "QTY." Is the quantity needed to service the assemblyillustrated, not the complete product.
PART DESCRIPTION ABBREVIATIONSOur Part Descriptions use common industry standard abbreviations in the naming conventions for many individual items.The list below details the abbreviations commonly used throughout this manual. If a specific abbreviation is not listed,contact any Sno-Way Dealer for clarification.
ABBREV. DESCRIPTION ABBREV. DESCRIPTION
BRKT BRACKET HW HARD WIRED
CB CARRIAGE BOLT HWH HEX WASHER HEAD
CLP CLEVIS PIN LN LOCK NUT
COTP COTTER PIN LW HELICAL LOCK WASHER
DP DOWN PRESSURE PS PASSENGER SIDE
DS DRIVER SIDE PW PLAIN FLAT WASHER
EB EYE BOLT SHCS SOCKET HEAD CAP SCREW
GR GRADE SLT SLOTTED
HDWE HARDWARE SS STAINLESS STEEL
HHCS HEX HEAD CAP SCREW ST SELF-THREADING
HN HEX NUT UB U-BOLT
HNILN HEX NYLON INSERT LOCKNUT WL WIRELESS
3
A-FRAME/TOWER ASSEMBLY
1
2 3
4
5
6
7
8
9
10
1112
13
16
18
19
17
20
22
24
22
27
30
31
32
31
29
33 24
23
28
25
24
21
14
20
22
26
22
3
3
10
15
22
22
24
20
32
30
33
22
38
37
39
35
35
36
34*
4
A-FRAME/TOWER ASSEMBLY
1 96112220 WELDMENT, CENTER DEFLECTOR ............................................................ 12 98009149 HHCS, .31"-18 X 1.0" GR. 8, ZP/DT............................................................... 23 98009024 PW, .31" HARD, ZINC .................................................................................... 64 98009023 HHCS, .31"-18 X 1.5", GR. 8, ZINC................................................................ 15 98009150 LN, 5/16-18, NYLON INSERT, ZP/DT............................................................. 36 96111951 WELDMENT, PIN, MBV.................................................................................. 17 98100455 TAP BOLT, 3/4"-10 X 4", UNC, FULL THREAD, ZP/DT ................................. 18 98009010 HHCS. 1/2-13 X 1-1/2. GR 8, ZP/DT .............................................................. 29 96112841 WELDMENT, SPRING HOLDER.................................................................... 110 98009078 HN, .62"-11, ZINC ........................................................................................... 411 98009013 LN, 1/2-13, NYLON INSERT, ZP/DT............................................................... 212 98100457 EB., 5/8"-11 X 4-1/2", ZP/DT........................................................................... 213 96001392 SPRING, TRIP ................................................................................................ 214 96112844 WELDMENT, SPRING HOLDER, BOTTOM................................................... 115 96111065 STOP .............................................................................................................. 216 96111064 PLATE, STOP ................................................................................................. 217 96111066 PLATE, ADJUSTMENT................................................................................... 118 98100441 CLP, 3/4" X 5" GR. 5, ZP/DT........................................................................... 119 96100000 FITTING, STRAIGHT CONNECTOR.............................................................. 120 96100001 FITTING, ELBOW 90°..................................................................................... 521 96112217 PLATE, SPACER V-PLOW ............................................................................. 222 98009085 COPT, 5/32 X 1-1/2, ZP ................................................................................. 623 96112611 CYLINDER, LIFT, 2" X 1" ROD (NOTE: REBUILD KIT NOT AVAILABLE)..... 124 98100007 CLP, .75-4.00, GR. 8, ZP/DT .......................................................................... 425 98100436 HHCS, 1-1/4"-8 X 8-1/4", GR. 8 ZP/DT .......................................................... 126 96111940 WELDMENT, A-FRAME, MBV........................................................................ 127 98100454 LN, 1-1/4"-8, NYLON INSERT, ZP/DT ............................................................ 128 98100453 COTP, 3/16" X 1-3/4", ZP................................................................................ 229 96111000 WELDMENT, TOWER .................................................................................... 130 98100440 CLP, 1" x 5", GR. 5, ZP/DT ............................................................................ 231 96112333 BUSHING,.750 X .813 I.D. X 1.25 O.D. .......................................................... 232 96111453 CYLINDER, SWING, DA 2" X 9-1/2", MBV..................................................... 233 98100441 CLP, 3/4" X 5" GR. 5, ZP/DT........................................................................... 234 96112630* KIT, MBV LIFT BRACKET (INCLUDES ITEMS #22, 24, 36-40...................... 135 BRACKET, LIFT, MBV.............................................................................. 236 PW, 3/4, A NARROW, ZP/DT................................................................... 637 HHCS, .75-10 X 4.5, GR 8, ZP/DT........................................................... 138 TUBE, SPACER, LIFT MBV KIT .............................................................. 139 LN, 3/4"-10, NYLON INSERT< ZP/DT ..................................................... 1
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.*See Owner’s Manual for correct Lift Bracket Kit mounting instructions.
ITEM PART NO. DESCRIPTION QTY
5
V-WINGTM BLADE
1 96112352 KIT, BLADE GUIDE-YELLOW.........................................................................2 HHCS, 5/16"-18 X1" SS (INCLUDED WITH ITEM #1)...................................2LN, 5/16"-18, SS (INCLUDED WITH ITEM #1) ...............................................2
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
1
2
3
2
4 5
98
6
7
10
11
15
1413
12
19
18 16
17
20
62223
21
1
1
1
3
2
2
3
3
4
6
10
11
12
13
14
1216
17
18
24
25 28
6
6
2526
26
27
27
ITEM PART NO. DESCRIPTION QTY
7
QUICKJACKTM STAND
0 96112436 QUICKJACKTM STAND KIT (INCLUDES ITEMS #1 THROUGH 15)1 WELDMENT, HANDLE, JACKSTAND ..............................................12 SPRING, JACKSTAND......................................................................13 HHCS. 1/2-13 X 1-1/2. GR 8, ZP/DT ................................................44 LN, 1/2-13, NYLON INSERT, ZP/DT.................................................65 HHCS, 1/2-13 X 3, GR 8, ZP/DT.......................................................26 WELDMENT, JACKSTAND MOUNT.................................................17 HHCS, 7/16"-20 X 2 1/2" GR. 8, ZP/DT ............................................18 BRCKT, JACK RETAINER ................................................................19 LN, 7/16"-20, GR. 8, ZP/DT ..............................................................110 WELDMENT, FOOT ..........................................................................111 PIN, 1/4"-20, LAYNARD ....................................................................112 HEX WASHER HEX SCREW, #8 X 1/2" ...........................................113 SPRING, JACKSTAND......................................................................114 BRACKET, RACHET PLATE.............................................................315 BRACKET, RACHET PLATE W/HANDLE.........................................1
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
4
3
45
2
1
6
7
8
9
10
11
12
13
14
15
ITEM PART NO. DESCRIPTION QTY
8
HYDRAULIC SYSTEM
1 96111958 POWER UNIT, MBV........................................................................................12 96112152 PUMP COVER, MBV ......................................................................................13 98100456 WING NUT, 5/16"-18 UNC, ZP/DT..................................................................44 98009230 PW, 5/16, W WIDE, ZP/DT .............................................................................45 98009150 LN, 5/16-18, NYLON INSERT, ZP/DT.............................................................26 98009082 HHCS, .31"-18 X 2.50" GR 5 ZP/DT ...............................................................27 96112910 HOSE, HYDRAULIC, 68.00"(VALVE PORT #C2 & C6) ..................................28 96112917 HOSE, HYDRAULIC, 62.00"(VALVE PORT #C1 & C5) ..................................29 96112919 HOSE, HYDRAULIC, 18.00" (VALVE PORT #C3 & C4) .................................210 96100000 FITTING, STRAIGHT CONNECTOR ..............................................................311 96100001 FITTING, ELBOW 90° .....................................................................................612 96112611 CYLINDER, LIFT, 2" X 1" ROD (NOTE: REBUILD KIT NOT AVAILABLE) .....113 96111453 CYLINDER, SWING, DA 2" X 9-1/2", MBV .....................................................214 96112332 FITTING, ELBOW, 90°, SWIVEL.....................................................................315 96112909 KIT, HOSE CLAMP, MBV (INCLUDES ITEMS 16 THROUGH 20) .................216 HHCS, .31-18 X 2.25 GR.5.......................................................................117 CLAMP, TOP PLATE ................................................................................318 CLAMP, PLASTIC MEDIUM .....................................................................219 LN, .31 X-18, NYLOCK INSERT...............................................................120 SELF THREADING, HHS .31-18 X 2.00 GR.5 ZINC................................121 96112500 CLAMP, HYDRAULIC HOSE ..........................................................................222 98100386 HWH, 5/16 X 1-1/4 TE X 3 ..............................................................................2
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
ITEM PART NO. DESCRIPTION QTY
11
POWER PACK WIRING
1 96104221 HARNESS, BATTERY POWER ......................................................................12 96104230 HARNESS, PLOW POWER............................................................................13 96105273 HARNESS, SOLENOID ..................................................................................14 96105167 BAG, POWER HARNESS PARTS ..................................................................15 96109143 FUSE HOLDER...............................................................................................16 96109142 FUSE, 250 AMP..............................................................................................17 96102891 CABLE, POWER.............................................................................................28 96105082 CAP, PROTECTIVE ........................................................................................29 96001227 STRAP, TIE PLASTIC .....................................................................................210 98100037 SCREW, SELF TAPPING, #10-16 x 1"............................................................411 98100391 CAPSCREW, HEX, 1/4"-20 x 7/8"...................................................................212 98100254 WASHER, FLAT, 1/4" ......................................................................................213 96002086 SWITCH, SOLENOID......................................................................................114 96105282 GROMMET, 3/8" ID .........................................................................................215 98100255 NUT, HEX HEAD NYLOCK, 1/4"-20................................................................216 96101891 CLAMP, TUBE, VINYL COATED.....................................................................117 98100386 HWH 5/16 X 1-1/4 TE X 3 ...............................................................................1
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
1
2
3
4
7
89
10
11
12
13
14
15
5
6
17
16
ITEM PART NO. DESCRIPTION QTY
12
NOTES
13
PROCONTROL SYSTEM WIRINGWith S.N. Before MBV100499
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.
NOTE: The Part Descriptions above use common industry standard abbreviations in the naming conventions.Reference "PART DESCRIPTION ABBREVIATIONS" on page 3 for a list of abbreviations used in this manual.