This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
1. About this Manual...................................................................................................................................................5
1.1 Important ............................................................................................................................................................5
3. General Description................................................................................................................................................7
4. Related service information...................................................................................................................................8
Software/Firmware Upgrade Process ....................................................................................................................12
Six angles’ view ......................................................................................................................................................34
Standard Default Color Space: Primary color space.
Preferred Timing Mode: In First Detailed Timing.
GTF supported: No.
<---Basic Display Parameters/Features--->
<---Color Characteristics--->
Red x: 0.6396484375
Red y: 0.3300781250
Green x: 0.3017578125
Green y: 0.5996093750
Blue x: 0.1503906250
Blue y: 0.0595703125
White x: 0.3125000000
White y: 0.3291015625
<-x-Color Characteristics-x->
<---Established Timings--->
Established Timings 1: A5
-720x400 @70Hz VGA,IBM
-640x480 @60Hz VGA,IBM
-640x480 @75Hz VESA
-800x600 @60Hz VESA
Established Timings 2: 6B
-800x600 @75Hz VESA
-832x624 @75Hz Apple,Mac II
-1024x768 @60Hz VESA
-1024x768 @75Hz VESA
-1280x1024 @75Hz VESA
Established Timings 3: 80
-1152x870 @75Hz Apple,Mac II
<-x-Established Timings-x->
<---Standard Timing Identification--->
-1024x576 @60 Hz
-1280x720 @60 Hz
-1280x960 @60 Hz
-1280x1024 @60 Hz
-1440x900 @60 Hz
23” LCD Color Monitor BenQ G2320HDB
23
-1600x1200 @60 Hz
-1680x1050 @60 Hz
-1920x1080 @60 Hz
<-x-Standard Timing Identification-x->
<---Detailed Timing Descriptions--->
Detailed Timing: 1920x1080 @ 60Hz.
<-x-Detailed Timing Descriptions-x->
<---Detailed Timing Descriptions--->
Detailed Timing: FD (Monitor limits)
Min. V. rate: 50Hz
Max. V. rate: 76Hz
Min. H. rate: 24KHz
Max. H. rate: 83KHz
Max. Pixel Clock: 210MHz
Detailed Timing: FC (Monitor Name) 'BENQ G2320HDB'
Detailed Timing: FF (Monitor SN) '15468970321'
<-x-Detailed Timing Descriptions-x->
Extension Flag: 00
Checksum: 61
23” LCD Color Monitor BenQ G2320HDB
24
Adjustment / Alignment Procedure Adjusting the Picture
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Press the MENU key to display the following main OSD menu.
There are four main OSD menus:
1. Display
2. Picture
3. Picture Advanced
4. System
Use the or keys to highlight a menu item, and press the ENTER key to enter the Menu item settings. The OSD menu languages may differ from the product supplied to your region.
Display menu
23” LCD Color Monitor BenQ G2320HDB
25
1. Press the MENU key to display the main menu.
2. Press the or keys to select DISPLAY and then press the ENTER key to enter the menu.
3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item.
4. Press the or keys to make adjustments or selections.
5. To return to the previous menu, press the MENU key.
Item Function Operation RangeAuto
Adjustment
Optimizes and adjusts the screen settings automatically for you.
The AUTO key is a ‘hot-key’ for this function.
When you connect a digital video output using a digital
(DVI) cable to your monitor, the AUTO key and the Auto
Adjustment function will be disabled.
Press the ENTER
key to select this
option and make
adjustment.
H. Position Adjusts the horizontal position of the screen image. 0 to 100
V. Position Adjusts the vertical position of the screen image. 0 to 100
Pixel Clock
Adjusts the pixel clock frequency timing to synchronize with the
analog input video signal.
Not applicable to a digital input signal.
0 to 100
Phase Adjusts the pixel clock phase timing to synchronize with the
analog input video signal.
Not applicable to a digital input signal.
Press the or keys to adjust the
value.
0 to 63
Picture menu
1. Press the MENU key to display the main menu.
2. Press the or keys to select PICTURE and then press the ENTER key to enter the menu.
3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item.
4. Press the or keys to make adjustments or selections.
5. To return to the previous menu, press the MENU button.
23” LCD Color Monitor BenQ G2320HDB
26
Item Function Operation Range
Brightness
Adjusts the balance between light
and dark shades.
The function is not available for
use when Dynamic Contrast is
on
Press the key to increase
the brightness and press the
key to decrease the brightness.
0 to 100
Contrast
Adjusts the degree of difference
between darkness and lightness.
The function is not available for
use when Dynamic Contrast is
on.
Press the key to increase
the contrast and press the key to decrease the contrast.
0 to 100
Sharpness
Adjusts the clarity and visibility of the
edges of the subjects in the image.
Press the key to improve the crispness of the display and
press the key to have softness effect on the display.
1 to 5
Color - Press ENTER to enter the Color menu.
Normal
Allows video and still photographs
to be viewed with natural coloring.
This is the factory default color.
0 to 100
Bluish
Applies a cool tint to the image
and is factory pre-set to the PC
industry standard white color.
0 to 63
Reddish
Applies a warm tint to the image
and is factory pre-set to the news
print standard white color.
Press the or keys to select
this option.
User Mode
Tailors the image color tint. The
blend of the Red, Green and Blue
primary colors can be altered to
change the color tint of the image.
The default start setting is 50.
Decreasing one or more of the
colors will reduce their respective
influence on the color tint of the
image. e.g. if you reduce the Blue
level the image will gradually take
on a yellowish tint. If you reduce
Green, the image will become a
magenta tint.
Press the or keys and the
ENTER key to select Red, Green,
or Blue. Then use Press the
or keys to make the color adjustments.
Red (0 to 100)
Green (0 to
100)
Blue (0 to 100)
23” LCD Color Monitor BenQ G2320HDB
27
Reset Color
Resets the User Mode custom
color settings to the factory
defaults.
Press the or keys to change the settings.
YES
NO
Press MENU to leave the Color menu.
Dynamic
Contrast(available
when the Picture
Mode is set to
Photo, Dynamics,
or Movie)
The function will increase the level
of contrast to provide sharper and
more detailed image quality.
Activating
Dynamic Contrast will
disable Brightness and
Contrast controls.
Press the ENTER key to select this
option. Press the or keys to change the settings.
0 to 5
Picture Advanced menu
1. Press the MENU key to display the main menu.
2. Press the or keys to select PICTURE ADVANCED and then press the ENTER key to enter the menu.
3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item.
4. Press the or keys to make adjustments or selections.
5. To return to the previous menu, press the MENU button.
Item Function Operation Range
Picture Mode
Selects a picture mode that best suits the type
of images shown on the screen.
• Standard - for basic PC application.
• Movie - for viewing videos.
• Dynamics - for viewing landscape-specific
videos and playing games.
• Photo - for viewing still images.
Press the or keys to change the
settings.
• Standard
• Movie
• Dynamics
• Photo
• sRGB
23” LCD Color Monitor BenQ G2320HDB
28
• sRGB - for better color matching
representation with the peripheral devices,
such as printers, DSCs, etc.
Senseye Demo
(available when the
Picture Mode is set
to Photo, Dynamics,
or Movie)
Displays the preview of screen images under
the selected mode from
Picture Mode. The screen will be divided into
two windows; the left window demonstrates
images of Standard mode, while the right
window presents the images under the
specified mode.
Press the or keys to change the
settings.
• ON
• OFF
Display Mode
This feature is provided to allow aspect ratio’s
other than 16:9 to be displayed without
geometric distortion.
• Full - Scales the input image to fill the screen.
Ideal for 16:9 aspect images.
• Aspect - The input image is displayed without
geometric distortion filling as much of the
display as possible.
Aspect is not available when the video
content is in a 16:9 aspect ratio.
Press the or keys to change the
settings.
• Full
• Aspect
System menu
1. Press the MENU key to display the main menu.
2. Press the or keys to select SYSTEM and then press the ENTER key to enter the menu.
3. Press the or keys to move the highlight to a menu item and then press the ENTER key to select that item.
4. Press the or keys to make adjustments or selections. 5. To return to the previous menu, press the MENU button
23” LCD Color Monitor BenQ G2320HDB
29
Item Function Operation Range
Input
Selects the D-sub (analog) input.
Use this to change the input to
that appropriate to your video
cable connection type.
Analog-only models do not
have the Input function.
Press the or keys to change the settings.
• D-sub
• DVI
OSD Settings - Press ENTER to enter the OSD Settings menu.
Language
Sets the OSD menu Language.
Press the or keys to change the settings.
The language options
displayed on your OSD may
differ from those shown on
the right, depending on the
product supplied in your
region.
• English
• French
• German
• Italian
• Spanish
• Polish/
• Japanese
• Czech/
• Traditional
• Chinese
• Hungarian/
• Simplified
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position Adjusts the horizontal position of
the OSD menu. 0 to 100
V. Position Adjusts the vertical position of
the OSD menu. 0 to 100
Display Time
Adjusts the display the OSD
menu.
Press the or keys to change the settings.
• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
23” LCD Color Monitor BenQ G2320HDB
30
OSD Lock
Prevents all the monitor settings
from being accidentally changed.
When this function is activated,
the OSD controls and hotkey
operations will be disabled.
Press the or keys to change the settings.
To unlock the OSD controls
when the OSD is preset to
be locked, press and hold
the "MENU" key for 15
seconds to enter the "OSD
Lock" option and make
changes.
Alternatively, you may use
the or keys to select "NO" in the "OSD Lock"
submenu from the "OSD
Settings" menu, and all OSD
controls will be accessible.
• YES
• NO
Press MENU to leave the OSD Settings menu.
DDC/CI*
Allows the monitor settings to be
set through the software on the
PC.
Press the ENTER key to select
this option.
Press the or keys to change the settings.
• ON
• OFF
Information
Displays the current monitor
property settings.
Press the ENTER key to select
this option.
Reset All
Resets all mode, color and
geometry settings to the factory
default values.
Press the or keys to change the settings.
• YES
• NO
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote diagnostics.
23” LCD Color Monitor BenQ G2320HDB
31
Display timing table
Pixel Format Horz-f(kHz) Horz -p Vert-f (Hz) Vert -P Pixel Clk (MHz) Source
640 x 480 31.47 - 59.94 - 25.175 VGA
640 x 480 37.50 - 75.00 - 31.500 VGA
720 x 400 31.47 - 70.08 + 28.321 VGA
800 x 600 37.88 + 60.32 + 40.000 VESA
800 x 600 46.88 + 75.00 + 49.500 VESA
832 x 624 49.72 - 74.55 - 57.283 MAC
1024 x 768 48.36 - 60.00 - 65.000 VESA
1024 x 768 60.02 + 75.03 + 78.750 VESA
1152 X 864 67.50 + 75 + 108 VESA
1152 x 870 68.68 - 75.06 - 100.000 MAC
1152 x 900 61.80 ± 65.96 ± 92.978 SUN
1280 x 768 47.396 + 60.0 - 68.25 CVT
1280x800 49.702 - 59.81 + 83.5 CVT-8
1280x720 44.77 - 59.86 + 74.5
1280 x 960 60.00 ± 60.00 ± 108.000 VESA
1280 x 1024 63.98 + 60.02 + 108.000 VESA
1280 x 1024 79.98 + 75.02 + 135.000 VESA
1360x768 47.70 + 60.01 + 85.5 VESA
1366x768 47.76 - 59.85 + 85.5
1440 x 900 70.6 - 75 + 136.75
1600 x 900 55.54 + 60 + 97.75 VESA
1680 x 1050 65.29 - 60.00 + 146.250 CVT 1.76MA
1680x1050 82.30 - 75 + 187
1920x1080 67.50 + 60.00 + 148.5 DMT
23” LCD Color Monitor BenQ G2320HDB
32
Factory OSD Menu
Turn off the monitor, keep pressing the “MENU” buttons, and turn on the monitor, then when we press the MENU
button, the factory OSD will be at the left top of the panel as below.
BenQ Service Page
1. Trigger method: Press “Menu” key and Power on.
2. Press the Menu key will display the service page
3. Press menu key will close the service page.
4. Power off will quit the service mode
5. At the service mode, the key function is same as normal OSD define.
6. The timer can only reset at the service mode by “Timer Reset”. And need to have a warning message to double
confirm the reset function. The timer should record up to 99999 hours.
7. Add one select item for DVI port, Mode 1, Mode 2 at service menu
Mode 1: To enable the hot plug pin detection. (HDMI port default)
Mode 2: To disable the hot plug pin detection. (DVI port default)
8. Add BenQ logo on/off item, the default is “on”
9. add the auto power on item, the default is “off ”
10. Add the timer reset warning message, when select the timer reset item, then the warning message will display
and need to confirm it again and the default is “No”.
11. Panel type define need to have the panel version
12. F/W version need to define the dual or analog model.
23” LCD Color Monitor BenQ G2320HDB
33
Level 2 Circuit Board and Standard Parts Replacement
Product Exploded View
NO PART NO QTY UNIT DESCRIPTION REMARK
1 A34G1310ADPA1B0130 1 PCS BEZEL 23"
2 Q33G0288 2 1C0100 1 PCS LENS
3 KEPC8QJ3 1 PCS KEY BOARD
4 Q33G0287ADP 1L0100 1 PCS KEY PAD
5 750GLS230HT132N000 1 PCS PANEL
6 0G1G1030 8120 2 PCS SCREW PB & MAINFRAME
7 756GQ9CB RN002 1 PCS MAIN BOARD(CBPC9RNBFQE)
8 PWPC9E41MQWW 1 PCS POWER BOARD
9 0M1G1030 6120 2 PCS SCREW M3X6 MB & MAINFRAME
23” LCD Color Monitor BenQ G2320HDB
34
10 A15G0772101102 1 PCS MAINFRAME
11 P15G8299 3 1 PCS BKT-VESA
12 A34G1311ADP 2B0130 1 PCS REAR COVER 23"
13 A33G0468ADPB1L0100 1 PCS PLATE_LOGO_B
14 AQ1G1740 12120 2 PCS SCREW STAND & HINGE
15 A37G0117011 1 PCS HINGE_BENQ_G2320
16 A34G1312ADP 1B0100 1 PCS STAND FRONT
17 AM1G1740 12 47 CR3 4 PCS SCREW STAND & HINGE &
REAR COVER
18 A34G1313ADP 1B0130 1 PCS STAND REAR
19 A33G0251ADP 2L0100 1 PCS CABLE CLIP
20 A34G1314ADP 1B0133 1 PCS BASE
21 Q12G6082 1 4 PCS FOOT PAD
22 A15G0773101 1 PCS MAINFRAME SHIELDING
23 A15G0774101 1 PCS MAINFRAME BRACKET
Six angles’ view
23” LCD Color Monitor BenQ G2320HDB
35
Product Disassembly
1). Remove the stand-base ASS’Y
Place the monitor face down on a smooth surface. Be careful to avoid scratch and injury during the process of
uninstall. And then remove the two screws as below to remove the stand-base ASS’Y.
Fig1
2). Remove the Bezel
Remove the bezel as follow:
Disconnect the key board connections
23” LCD Color Monitor BenQ G2320HDB
36
3). Remove the rear cover
4).Remove the Panel
Disconnect the Lamp Connections and LVDS Cable connection.
23” LCD Color Monitor BenQ G2320HDB
37
5).Remove the Main Board and Power Board
Remove the screws and disconnect the all connections, at last you can get the Main Board and Power Board
as follow.
23” LCD Color Monitor BenQ G2320HDB
38
MAIN BOARD
POWER BOARD
23” LCD Color Monitor BenQ G2320HDB
39
Block Diagram
Main Board
D-Sub Connector
(CN301)
H sync
V sync
RGB
Panel Interface
(CN601)
Key Control Interface
(CN202)
Crystal 24MHZ
(X401)
Scalar RTD2545LH-GR
(U501) MCU RTD2122L-LF
(U401)
DVI Connector
(CN302)
RXN/P
RXCN/P
SCL/SDA
23” LCD Color Monitor BenQ G2320HDB
40
Power Board
ON/OFF
PID
EMI filter
Start Resistor (R904, R905)
PWM Control (IC901)
Transformer
AC input 16V
Feedback Circuit
Transformer (PT801)
MOSFET (Q805, Q806)
Lamp
5V
Bridge Rectifier and Filter
Feedback Circuit
Rectifier diodes
Output Circuit
PWM Control (IC801)
Power Switch
(Q901)
Photocoupler
(IC903)
16V
DIM
23” LCD Color Monitor BenQ G2320HDB
41
Schematic Diagram Main Board
+C202
C2100.1uF/16V
KEY1
C206
0.1uF/16V
CN201
CONN
123456789
LED_G
KEY0
+ C203
BKLT-VBRI
LED_R
CMVCC
BKLT-EN
VCC3
VCC3
DIM# 4
R208120R 1/16W
Volume#
R201200Ω 1/16W
MVCC
Q204
MMBT3906
1
23
Mute 4
PANEL_ID# 4
Panel ID(0.5V~3V)
ZD203
NC/UDZSNP5.6B12
Mute
BKLT-EN
Back lightDimming(0.5V~3V)
LED_R# 4
LED_R
Q202MMBT3904
VCC3
Near to Connect
R21010K 1/16W
KEY1 4
C204
0.1uF/16V
CMVCC
LED_G# 4
CN202
CONN
123456
ZD201
NC/UDZSNP5.6B
12
* BKLT-EN High ON(3.3V)
R207120R 1/16W
C205
0.1uF/16V
C_PANEL_INDEX
C209
0.1uF/16V
ZD202
NC/UDZSNP5.6B
12
CBPCRRHBFQ1 1.2
BenQ G920HD B
2 6Thursday , January 08, 2009
715G3327-1A <称爹>2.POWERG3327-1A-X-X-5-090108
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
KEY0 4
LED_GPOWER_KEY#
FB202
NC/120OHM
INV_ON# 4
Volume# 4 U201
AP1117E33LA
1
23
VSS
VOUTVIN
CMVCC
Q205
MMBT3906
1
23
FB201
120Ω
POWER_KEY# 4
C201
0.1uF/16V
R2024K7 1/16W
CMVCC
R213 10K 1/16W
23” LCD Color Monitor BenQ G2320HDB
42
VGA_R+
VGA_B+
R316 10K 1/16W
C309
0.047uF
CN302
JACK
12
3
45
67
8
910
11
1213
14
15
16
1718
19
2021
22
2324
26 25
DAT2-DAT2+
2/4shield
DAT4-DAT4+
DDC SCLDDC SDA
VSYNC
DAT1-DAT1+
1/3shield
DAT3-DAT3+
+5V
SYNC GND
HPD
DAT0-DAT0+
0/5shield
DAT5-DAT5+
clk shield
clk+clk-
GN
DG
ND
U106AZC199-04S
123 4
56
I/O1GNDI/O2 I/O3
VDDI/O4
DDC1_SDA
FB109
300 OHM
R311100R 1/16W
FB301
19R BEAD1 2
RTD_G-
C1120.1uF/16V
Q301MMBT3904
RTD_V 5
DSUB_CONNECT 4
C311
0.047uF
R301 100R 1/16W
CN301
DB15
162738495
11
12
13
14
1510
1716
VGA_G+
MCU_VCC_S
RX2P 5
H_Sy nc
R308 100R 1/16W
RTD_B+ 5
RX0N
R323 10R 1/16W
FB304150 OHM
U107AZC199-04S
123 4
56
I/O1GNDI/O2 I/O3
VDDI/O4
R310
75R 1/10W 5%
RTD_G+ 5
VGA_CON
RX2N
C303
33pF
R304
2K2 1/16W
R321 10R 1/16W
D109
BAT54C
3
12
C415
0.1u
F/1
6V
DDC2_SDA 4
RTD_R+
R318 10R 1/16W
DSUB_5V
V_Sy nc
ZD306
NC
12
RXCP
HPD_CTL
RX2P
R441100R 1/10W 5%
GND POWER
DDC1-SDA
R306 100R 1/16W
ZD304
RLZ5.6B
12
RTD_G+
VGA_G+
DSUB_5V
H_Sy nc
C120
0.1uF/16V
RTD_H 5
RTD_B- 5
RX1P
R440100R 1/10W 5%
C121
0.1uF/16V
R324 10R 1/16W
VGA_G-VG
A_B
+
R313 100R 1/16W
R426 22R 1/10W 5%
CBPCRRHBFQ1 1.2
BenQ G920HD B
3 6Thursday , January 08, 2009
715G3327-1A<称爹>
3.INPUT
G3327-1A-X-X-5-090108OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
FB303
19R BEAD1 2
R315 100R 1/16W
R328 100R 1/10W 5%
DDC2_SCL 4DDC2_SDA
V_Sy nc
R329 100R 1/10W 5%VGA_G+
C1010.1uF/16V
RX0P 5
C306
0.047uF
RX1P 5
VGA_B-
RX1N
HOT_PLUG
R331200R 1/10W 5%
C3085pF/50V
VGA_R+
R319 10R 1/16W
ESD_VCC
RTD_B-
U104
AZC199-04S
123 4
56
I/O1GNDI/O2 I/O3
VDDI/O4
DGND
RTD_R- 5
DDC1_SDA4
RXCN
ESD_VCC
ESD_VCC1
候綼 U103 RTD_R+ 5
RX0N 5
ESD_VCC
R332200R 1/10W 5%
RX0P
R330 200R 1/10W 5%
R3274K7 1/16W
ESD_VCC1
ZD305
RLZ5.6B
12
DVI_5V
RX1N 5
VGA_R-
R307
75R 1/10W 5%
C414
0.1u
F/1
6VDVII_DETECT 4
R325 10R 1/16W RXCN 5
VGA_B+C304
0.047uF
DSUB_V
VGA_R+
VGA_R-
DDC1_SCL4
R320 10R 1/16W
DSUB_V 4
R317 100R 1/16W
C301
0.047uF
G2507-H-K-X-2-070618
C3105pF/50V
C307
0.047uF
C316
0.1uF/16V
ESD_VCC2
DSUB_H
FB108
300 OHM
ESD_VCC2
FB302
19R BEAD1 2
C1190.1uF/16V
R314
75R 1/10W 5%
RTD_G- 5
R303 100R 1/16W
VGA_G-
RTD_R-
U103
AZC199-04S
123 4
56
I/O1GNDI/O2 I/O3
VDDI/O4
R322 10R 1/16W
R309 100R 1/16W
VGA_B-
R428 22R 1/10W 5%
R326100K 1/16W 5%
C302
33pF
DDC2_SCL
RX2N 5
RXCP 5
DDC1_SCL
DDC1-SCL
R312 100R 1/16W
U105AZC199-04S
123 4
56
I/O1GNDI/O2 I/O3
VDDI/O4
RTD_B+
R3052K2 1/16W
C3055pF/50V
ESD_VCC1
23” LCD Color Monitor BenQ G2320HDB
43
C406
0.1uF/16V
LED_G#2
R407
4K7 1/16W 5%
RTD_SD3/SDI 5
LED_G# R434 100R 1/16W
DSUB_V1
PPWR_ON#DIM#
WP
C404
NC
R430 100R 1/16W
R443
4K7 1/16W
PANEL_VCC
2
HPD_CTL3POWER_KEY#
R444
4K7 1/16W
D402
BAV70
Volume#
R406
NC
/4K7 1/16W 5%
DVII_DETECT3
DDC2_SDA
R437
3.9K
OH
M +
-1%
1/1
6W
R420 NC
PPWR_ON#6
C41110pF
IICSCL
INV_ON#
IICSDA
1
DDC1_SDA3
CRYSTAR_OUT 5
Q401MMBT3904
DDC2_SDA3
R40410K 1/16W
R424 1K 1/16W
X40124mhz
1 2
R432 100R 1/16W
PANEL_ID#2
IICSDA
C412
1uF 10V
R451
4K7 1/16W
DIM#2
R41
34K
7 1/
16W
DDC1_SCL3
DSUB_CONNECT
R433 100R 1/16W
R422 NC
DVI_5V
MCU_VCC_SMCU_VCC_S
PANEL_ID# R423 NC
R43610K 1/16WC403
0.1uF/16V
RTD_SCLK 5
Mute2
MCU_VCC
CMVCC
R445
4K7 1/16W
D401
NC
1
3
2
DDC2_SCL
R429 0R05 1/16W
R4124K7 1/16WMCU_VCC_S
R408 NC
INV_ON#2
D403
LL4148
R4396K8 1/16W
R431
6K8 1/16W
DSUB_CONNECT 3
WP
LED_R#
RTD2122L
U401 RTD2122L-LF
123
4
5
6 7
8
1715
41 40 39 38 37 36 35 34 33
19
28
29
2021222324252627
169
1011121314
18
303132
4342
4445464748
P5.5/PWM5DSCL2/P5.6DSDA2/P5.7
RST
ASCL1/P3.0/RXD
NC
NC
ASDA1/P3.1/TXD
VSS
XO
VC
C
P1.
0/T2
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
NC
VSYNC
NC
P6.0/ADC0P6.1/ADC1P6.2/ADC2P6.3/ADC3
P6.4P6.5
P6.6/CLKO1P6.7
XI
P3.2/INT0P3.3/INT1P3.4/T0P3.5/T1P7.6/CLKO2P7.7
NC
NCNCNC
NC
NC
P5.0/PWM0P5.1/PWM1P5.2/PWM2P5.3/PWM3P5.4/PWM4
R4033.9KΩ 1/16W
Closed to X'tal
MCU_VCC
DSUB_V
RTD_SCLK
C402
NC
Closed to MCU
C4100.1uF/16V
POWER_KEY#
KEY0
R415
6K8 1/16W
MCU_VCC
R42510K 1/16W
KEY0 2
R438
3.9K
OH
M +
-1%
1/1
6W
MVCC
IICSCL
C40110pF
DSUB_5V
KEY1
MCU_VCC
DDC2_SCL3
C409NC/10pF
FB401150 OHM
R405
NC
/4K7 1/16W 5%
R401
3.9K
OH
M +
-1%
1/1
6W
R4021K 1/16W
CRYSTAR_OUT
MCU_VCC
R435 100R 1/16W
RTD_SD3/SDI
CBPCRRHBFQ1 1.2
BenQ G920HD B
4 6Monday , February 09, 2009
715G3327-1A<称爹>
4.MCU/RTD2122LG3327-1A-X-X-5-090108
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
KEY1 2
R409 NC
R41610K 1/16W 5%
BAT54C U403
NC/M24C16
1234 5
678NC
NCNCVSS SDA
SCLWC
VCC
+C405
10UF50V
POWER_KEY# 2
3
CMVCC
DSUB_V 3DDC1_SCL
U402AZ431AN-AE1
R41
44K
7 1/
16W
LED_R#2
R4114K7 1/16W
VCC3
MCU_VCC_S
Mute
R453
1K 1/16W
R427 NC/1K 1/16W 5%DDC1_SDA
R454
NC
MCU_VCC_S MCU_VCC
Volume#2
R442 100R 1/16W
R410 NC
23” LCD Color Monitor BenQ G2320HDB
44
LVDS_E5
RXO1+
RT
D_G
+
R1.8DVCC
RXOC-
RXO3+
LVDS_O[0..9] 6
U501
RTD2545LH-GR
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15 16 17 18 19 20 21 22 23 24
36
35
34
33
32
31
30
29
28
27
26
25
48 47 46 45 44 43 42 41 40 39 38 37
V1/REXT
V2/RX1P
V3/RX1N
V4/RX0P
V5/RX0N
V6/RXCP
V7/RXCN
AVS
AHS
ADC_GND
B-
B+
G-
G+
R-
R+
AD
C_V
DD
BJT
_B
VC
CK
PG
ND
TX
E3+
TX
E3-
TX
E2+
TX
E2-
TXO1-
TXO1+
TXO2-
TXO2+
TXOC-
TXOC+
TXO3-
TXO3+
TXE0-
TXE0+
TXE1-
TXE1+
V0/
RX
2N
VC
LK/R
X2P
TM
DS
_VD
D
XIN
DD
CS
CL/
PW
M0
DD
CS
DA
/PW
M1/
IRQ
SC
L
SD
A
VC
CK
PG
ND
TX
O0-
TX
O0+
RX
2P
LVDS_E0
C5020.1uF/16V
RX0P3
RTD_R-3
RX
2P3
RX1N
RXO2+R508 100R 1/16W
RXCP3
RT
D_S
CLKC503
0.1uF/16V
LVDS_O3
RX1P3
LVDS_O1
RTD_B-
FB502120Ω
DG
ND
LVDS_E6
R1.8DVCC
RTD_H3
R1.
8DV
CC
RXO0+
LVDS_E1
CR
YS
TA
R_O
UT
4
RXCN
RXE1-
Q502
KN2907AS
RX
O0-
Q501KN2907AS
RXE1+
RXE0+
RX
E3-
BJT
_B
RT
D_D
DC
SD
A
TM
DS
_VD
D
RXE0-
RXCP LVDS_E9
RXEC+
RT
D_R
-
RTD_DDCSCL
C506
0.1uF/16V
RX
2N
LVDS_E2
RXE1-
TM
DS
_VD
D
LVDS_O4
RXEC-
RXO3-
DGND
RXO2+
LVDS_E3
RXOC+
C507
1uF 10V
For HDCP
RT
D_R
+
RX0N3
RT
D_G
-
RXOC-
RTD_H
RXO0-
VCC3
RTD_V
LVDS_O9
LVDS_O6
FB501
150 OHM
RXO2-
RTD_G+3
LVDS_O2
RTD_B-3
RT
D_S
CLK
4
RXE0-
R507 3.3Ω 2W
R1.
8DV
CC
1
1.8AVCC
RXOC-
LVDS_O0
RXE3-
VCC3
RTD_V3
RT
D_S
D3/
SD
I4
LVDS_O5
LVDS_O8
RXO1-
RX
E2+
R1.
8DV
CC
CR
YS
TA
R_O
UT
DGND
RXO1+
RX
O0+
R5031K 1/16W
RTD_DDCSDA
RX1N3
RX0P
TMDS_VDD
RTD_R+3
DDC2_SDA4
RXOC+
RXOC+
RTD_G-3
RXE2+
RX1P
FB503120Ω
BJT
_B
RXO3+
R1.8DVCC1
LVDS_E7LVDS_E8
LVDS_O7
C501
1uF 10V
RXE0+
RT
D_D
DC
SC
L
+C505
22UF50V
RXO3-
CBPCRRHBFQ1 1.2
BenQ G920HD B
5 6Friday , February 13, 2009
715G3327-1A<称爹>
5.RTD2525LG3327-1A-X-X-5-090108
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
RXO2-
RX
E3+
RXE2-
RX0N
LVDS_E4
RTD_B+3
DDC2_SCL4
RX
E2-
R509 100R 1/16W
RX
2N3
RXO1-
RXCN3
LVDS_E[0..9] 6
RTD_B+
RXE3+
RXE1+
VCC3
DG
ND
RT
D_S
D3/
SD
I
23” LCD Color Monitor BenQ G2320HDB
45
RXE0+
RXE1+
RXE0-
RXOC+
RXEC+
RXE1-
3
PPWR_ON#4
CN602
CONN
24681012141618202224
13579
11131517192123
PANEL_VCC
RXEC+LVDS_E0
PANEL_VCC
RXE1-
R6054K7 1/16W
RXO0+
CMVCC
LVDS_E9
RXE2-
RXO0-
AO3401L
R602330R 1/8W 5%
RXE1+
RXE2-
RXE0-
RXEC-
RXO2+
2
RXE3-
C602
0.01uF/25V
LVDS_E2
G
PANEL_VCC
RXE2+
RXO2-
PANEL_VCC
RXO3-
LVDS_E4RXE1+
RXE3+
C6030.1uF/16V
LVDS Panel ( FFC Type )
LVDS_E[0..9]5 RXE2+RXEC-
1
LVDS_E3
RXE0-
RXE2+RXEC+
RXE0+
R603
NC
R606NC
/390R 1/8W
5%R60447K 1/16W 5%
Realtek Semiconductor Corp.
RXE0+
RXO3+
CN601
123456789
101112131415161718192021222324252627282930
RXE3-
LVDS_E6LVDS_E7
LVDS_E5
S
D
Q601AO3401
RXE2-
RXO1+
RXE3+
PPWR_ON#
RXE3-
RXOC-
+C60447UF25V
R60110K 1/16W
RXO1-
CBPCRRHBFQ1 1.2
BenQ G920HD B
6 6Monday , February 09, 2009
715G3327-1A<称爹>
6.OUTPUTG3327-1A-X-X-5-090108
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
LVDS_E1
Q602MMBT3906
1
23
FB601
120Ω
LVDS_E8
RXEC-
RXE1-
RXE3+
PANEL_VCC
23” LCD Color Monitor BenQ G2320HDB
46
Power Board
PWPC9E41MQWW 1
Custom
1 3Friday , March 27, 2009715G2824-3-5 ODM MODEL03.POWER
G2824-3-5-X-26-090327
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
C938
1500PF2KV
FB901BEAD
12
C9120.001uF
+5V1
C932
0.001uF
C9300.1uF
D90731DQ06FC3
!
R918100 OHM 1/4W
C9280.01uF
C931
0.1uF
R950 100 OHM 1/4W
C909220pF
FB9020 OHM 1/4W
R9302.43K OHM 1% 1/10W
C903
0.47uF
GND2GND
12
IC903PC123X2YFZOF
12
43
+C905150uF/450V R939
1K 1/8W 5%
L90127mH
1 4
2 3
!
D903 IN4148
NC
!
D908SP1060
1
2
3
NR901NTCR
R914
0.39 OHM 2W +-5%
L904
Coil
F901FUSE
R949 100 OHM 1/4W
D906FMX-12SL
1
2
3
HS3HEAT SINK(D906)
12
+5V1
R93810K 1/8W 5%
R920100 OHM 1/4W
R912220 OHM 1/4W
C9350.001uF
C9061500PF2KV
+ C90822uF 50V
!
+16V
ON/OFF
R9048.2K OHM 1/4W
Q901STP10NK70ZFP
C9011000pF
R935 100 OHM 1/4W
HS1HEAT SINK(Q901)
12
R902
1M 1/4W 5%
L906JUMPER
12
+C917
470UF M 35V
+5V
+C918
470UF M 35V
VOL
C937
68pF1KV
R951 100 OHM 1/4W
DIM
MUTE
R9273K6 1/10W 1%
NC
C904
NC
CN902
CONN
123456789
10111213
!
!
C9240.1uF
R901
1M 1/4W 5%
L903
Coil
Q903KTD1028
R946470OHM2W
!
GND1GND
12
+ C9161000uF25V
+ C915470UF M 16V
C9021000pF
HS2HEAT SINK(D908)
12
R9093.3 OHM 1/4W
L905
Coil
F903
FUSE
!
CN903
CONN
1234
-+BD901
GBU408
2
1
3
4
!
+16V
D901FR103
F902
NC
R94043K 1/10W 1%
R961 100 OHM 1/4W
C9003300pF 250V
R9261K 1/10W 1%
!
PID
C940
0.047uF
ZD902T ZX18B
+ C934NC
R910
10R 1/4W 5%
!
XXXX
CN901SOCKET
12
3
R943470R 1/8W 5%
R9058.2K OHM 1/4W
C921
1000PF/250VAC
-+BD901A
KBP208G
2
1
3
4
IC904KIA431A-AT/P
T901POWER X'FMR
1
3
4
5
6
78
910
1112
C9070.1uF
C9290.001uF
R924100R 1/8W 5%
R962 100 OHM 1/4W
R903
100K OMH 2W +-5%
!
+
C9391000uF/25V
D900FR107
R919100 OHM 1/4W
+5V
R9251K 1/8W 5%
IC901
LD7576
1234 5
678
CTCOMPCSGNDOUT
VCCNCHV
23” LCD Color Monitor BenQ G2320HDB
47
LV4
C818
1.5UF/10V
R817 4R7 1/8W 5%
XXXX
L802
L
1
2
4
3
R81182K1/10W
PID LV1
R8455K1 1/10W 5%
R808360R 1/10W 1%
ZD803RLZ5.6B
12
IC801 ta9687GN-A-0-TR
123456789
10111213141516
VSENSSTCMP
CTRT1
GNDAPDR2GNDPNDR2NDR1
PDR1VDDATIMERPWMISENOVPTENA
R8091M 1/10W 5%
R810
100K 1/10W 1%
PWPC9E41MQWW 1
Custom
1 3Friday , March 27, 2009
715G2824-3-5ODM MODEL
02.INVERTER
G2824-3-5-X-26-090327
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹
C82156pF3KV
DIM
CN801
CONN
12
R841 1M 1/10W 5%
C812NC
LV2
R80710K 1/10W 5%
Q805
AO4620
1234 5
678
S2G2S1G1 D1
D1D2D2
C81956pF3KV
C809220pF
R8470R05 1/8WR818
4R7 1/8W 5%
R8045K1 1/8W 5%
CN802CONN
12
Q806
AO4620
1234 5
678S2
G2S1G1 D1
D1D2D2
R812
100K 1/10W 1%
R8445K1 1/10W 5%
R8435K1 1/10W 5%
+5V
LV1
R839 1M 1/10W 5%
R830
5K6 1/8W 5%
ZD802RLZ5.6B
12
LV3
R8460R05 1/8W
C8150.1uF
ON/OFF
R80110K 1/10W 5%
L801
L
1
2
4
3
+16V
+
C804
1000uF/25V
C8110.1uF
D807 BAV70
3
1
2
D803BAV99
3
1 2
R805NC
C80833NF50VC810
0.0033uF
LV4
C817
2PF6KV
Q802
2R7002 SOT-23
R838 1M 1/10W 5%
D808 BAV70
3
1
2
R816
4R7 1/8W 5%
R80222R 1/8W 5%
CN803
CONN
12
R819 4R7 1/8W 5%
C813NC
C82256pF3KV
R83656KOHM +-5% 1/10W
C8050.022uF
LV3
LV2
R813100K 1/10W 5%
C82056pF3KV
C814220pF
C8010.047uF
R8035K1 1/8W 5%
D801
IN4148
R8376K8 1/10W 5%
D806 BAV70
3
1
2
R815NC
C8062.2uF/16V
PT801POWER X'FMR6
2
75
1 8C8020.047uF
R8480R05 1/8W
R840 1M 1/10W 5%
R806
100K 1/10W 1%
R8425K1 1/10W 5%
R828
6.2M OHM 1W
CN804CONN
12
23” LCD Color Monitor BenQ G2320HDB
48
Key Board A
A
B
B
C
C
D
D
E
E
4 4
3 3
2 2
1 1
ENTE
R
LED_RED#
LED_GRN#
LED_GRN#
LBADC1
RIG
HT
LEFT
AUTO
LBADC2DC_POWERON
POW
ER
MEN
U
LED_RED#
GND GNDGND GND
GND
GND
GND GND
GND
GND GND GND GND
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
C
G920HD(A)
2 2Thursday, December 04, 2008
715G3367-E< >02.KEY BOARD
G3367-E-X-X-2-081223
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
C
G920HD(A)
2 2Thursday, December 04, 2008
715G3367-E< >02.KEY BOARD
G3367-E-X-X-2-081223
OEM MODEL Size
Rev
Date Sheet of
TPV MODEL
PCB NAME
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
C
G920HD(A)
2 2Thursday, December 04, 2008
715G3367-E< >02.KEY BOARD
G3367-E-X-X-2-081223
(MENU) (RIGHT)(LEFT) (ENTER)(Power)(AUTO)
1.435V
0.673VLBADC2
RIGHT
1.435V
LBADC10.673V
(3.0K)
(1.8K)
ENTER
AUTO
(1.0K)
(3.0K)
MENU
LBADC31.435V
0.673VLEFT
(3.0K)POWER
(1.8K) B
C01
00.
1uF
C01
00.
1uF
C004
NC/0.001uF
C004
NC/0.001uF
ZD00
4N
CZD
004
NC
R003 1K 1/10W 1%R003 1K 1/10W 1%
SW006
SW006
SW006
SW006
21
3 4
5
LED001LED
LED001LED
231
R005 3K 1/10WR005 3K 1/10W
ZD006
NC
ZD006
NC
ZD00
2N
CZD
002
NC
C001
NC/0.001uF
C001
NC/0.001uF
ZD00
3N
CZD
003
NC
CN001CONNCN001CONN123456
78
C00
90.
1uF
C00
90.
1uF
C005
NC/0.001uF
C005
NC/0.001uF
SW003
SW003
SW003
SW003
21
3 4
5
C00
70.
1uF
C00
70.
1uF
C00
60.
1uF
C00
60.
1uF
C002
NC/0.001uF
C002
NC/0.001uF
ZD00
5N
CZD
005
NC
C003
NC/0.001uF
C003
NC/0.001uF
C01
10.
1uF
C01
10.
1uF
R007 3K 1/10WR007 3K 1/10W
SW002
SW002
SW002
SW002
21
3 4
5
SW005
SW005
SW005
SW005
21
3 4
5
ZD00
1N
CZD
001
NC
SW001
SW001
SW001
SW001
21
3 4
5
R006 1K 1/10W 1%R006 1K 1/10W 1%
SW004
SW004
SW004
SW004
21
3 4
5
R002 3K 1/10WR002 3K 1/10W
C00
80.
1uF
C00
80.
1uF
R004 1K 1/10W 1%R004 1K 1/10W 1%
23” LCD Color Monitor BenQ G2320HDB
49
Troubleshooting Guide
Equipments and Tools Requirement
1. Voltmeter.
2. Oscilloscope.
3. Pattern Generator.
4. DDC Tool with and Compatible Computer.
5. Alignment Tool.
6. LCD Color Analyzer.
7. Service Manual.
8. User Manual.
Frequently asked questions (FAQ)
The image is blurred: Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the correct
resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by working
through the instructions in the "Adjusting the refresh rate" section on the link "Adjusting the Screen
Resolution". It is normal for blurring to occur due to conduction losses in extension cables. You can minimize
these losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the instructions on the link "Adjusting the Screen Resolution" on the CD. Select the native resolution.
Pixel errors can be seen: One of several pixels is permanently black, one or more pixels are permanently white, one or more pixels are
permanently red, green, blue or another color.
• Clean the LCD screen.
• Cycle power on-off.
These pixels are permanently on or off. And it is a natural defect that occurs in LCD technology.
The image has a faulty coloration: It has a yellow, blue or pink appearance.
Select MENU > PICTURE > Color > Reset Color, and then choose “YES” in the “Caution” message box to
reset the color settings to the factory defaults.
If the image is still not correct and the OSD also has faulty coloration, this means one of the three primary
colors is missing in the signal input. Now check the signal cable connectors. If any pin is bent or broken off,
please contact your dealer to get necessary support.
No image can be seen: Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means you are
using a display mode that this monitor does not support, please change the setting to one of the supported
mode. Please read the “Preset display modes” section from the link "Adjusting the Screen Resolution".
23” LCD Color Monitor BenQ G2320HDB
50
Faint shadow from the static image displayed is visible on the screen: • Activate the power management function to let your computer and monitor go into a low power "sleep" mode
when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
Is the prompt on the display illuminated in orange? If the LED is illuminated in orange, the power management mode is active. Press any button on the computer
keyboard or move the mouse. If that does not help, check the signal cable connectors. If any pin is bent or
broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers: Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the correct
resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor running at its native
resolution. To have the optimal display performance of each type of input sources, you can use the "Display
Mode" function to set a proper aspect ratio for the input sources.
The image is displaced in one direction: Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the correct
resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible: • To unlock the OSD controls when the OSD is preset to be locked, press and hold the “MENU” key for 15
seconds to enter the “OSD Lock” option and make changes.
• Alternatively, you may use the or keys to select “NO” in the “OSD Lock” submenu from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
If your problems remain after checking this manual, please contact your place of purchase or e-mail us at: