Multimedia Plasma Monitor SERVICE MANUAL FILE NO. Model No. PDP-32H1EV (EUROPE) PDP32H1A (U.S.A., ASIA) ORIGINAL VERSION PRODUCT CODE 1 114 016 00 PDP-32H1EV, J3DH 1 114 035 00 PDP-32H1A, J3DFB REFERENCE NO. SM5110287-00 Chassis No. PDP-32H1E-00 (PDP-32H1EV) NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual. If the Original Version Service Manual Chassis No. does not match the unit’s , additional Service Literature is required. You must refer to “Notices” to the Original Service Manual prior to servicing the unit. CONTENTS Pages SAFETY INSTRUCTIONS --------------------------------------------------------------------- 2 TECHNICAL SPECIFICATIONS ------------------------------------------------------------- 3 DIMENSIONS AND OPTIONS---------------------------------------------------------------- 4 TERMINALS FOR PC----------------------------------------------------------------------- 5 - 6 MECHANICAL DISASSEMBLIES------------------------------------------------------ 7 - 16 ADJUSTMENT ---------------------------------------------------------------------------- 17 - 21 CIRCUIT BLOCK DIAGRAM----------------------------------------------------------- 22 - 23 POWER SUPPLY LINES --------------------------------------------------------------------- 24 POWER FAIL CIRCUIT ----------------------------------------------------------------- 25 - 26 TROUBLESHOOTING ------------------------------------------------------------------ 27 - 28 CONTROL PORT FUNCTIONS ------------------------------------------------------ 29 - 30 IC BLOCK DIAGRAMS------------------------------------------------------------------ 31 - 38 PIN DESCRIPTION OF DIODE, TRANSISTOR AND IC ----------------------------- 39 PARTS LIST ------------------------------------------------------------------------------- 40 - 61 PARTS DESCRIPTION AND READING IN SCHEMATIC DIAGRAM ------------ 62 SCHEMATIC DIAGRAMS---------------------------------------------------------- A-1 - A-18 PRINTED WIRING BOARD DIAGRAMS ------------------------------------- A-19 - A-30 Chassis No. J3D-32H1A00 (PDP-32H1A) Speaker Unit and Stand are not included.
64
Embed
SERVICE MANUAL - cncms.com.aucncms.com.au/.../PlasmaMonitors/pdp-32h1ev/pdp-32h1ev_sm.pdfSERVICE MANUAL Multimedia Plasma Monitor FILE NO. Model No. PDP-32H1EV (EUROPE) PDP32H1A (U.S.A.,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUSVOLTAGE CONSTITUTING A RISK OF ELECTRICSHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANTOPERATING AND MAINTENANCE INSTRUCTIONS IN THEOWNER'S MANUAL WITH THIS UNIT.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY PRECAUTIONS
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TORAIN OR MOISTURE.
This Plasma Monitor should be set in the way indicated. If not, it may result in a fire hazard.
Take appropriate space on the top, sides and rear of the Plasma Monitor cabinet for allowing air circulation andcooling the Plasma Monitor. Minimum distance should be taken. If the Plasma Monitor is to be built into acompartment or similarly enclosed, the minimum distances mustbe maintained. Do not cover the ventilation slot on the PlasmaMonitor. Heat build-up can reduce the life of your PlasmaMonitor, and can also be dangerous.
If the Plasma Monitor is not to be used for an extended time,unplug the Plasma Monitor from the power outlet.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.
SIDE and TOP REAR
CAUTION IN INSTALLING
Handle the Plasma Monitor carefully when installing it and do not drop.
Locate set away from heat, excessive dust, and direct sunlight.
For correct installation and mounting it is strongly recommended to use a trained, authorized dealer. Failure tofollow correct mounting procedures could result in damage to the equipment or injury to the installer.
10 cm
10 cm
10 cm
6 cm
NOTE :When Plasma Monitor is not used for a long period of time, unlighting dots may be observed. This is caused bycharacteristic of the Plasma Monitor. If this occurs, turn the Plasma Monitor on and leave it on about 1 hour. Thesedots will gradually disappear.
Safety Instructions
Product safety should be considered when a component replacement is made in any area of the monitor.Components indicated by mark in the parts list and the schematic diagram designate components inwhich safety can be of special significance. It is, therefore, particularly recommended that the replacement ofthere parts must be made by exactly the same parts.
PRODUCT SAFETY NOTICE
-3-
Technical Specifications
Screen Diagonal 32VProduct name Multimedia Plasma MonitorPanel type Plasma Display Panel (16 x 9)
Display area 716 mm (W) x 399 mm (H)Resolution / Color 852 x 1024 pixels / 16,770,000 colorsViewing Angle 160˚ (Vertical / Horizontal)Color System PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
PC Interface D-SUB, RGBCapability Up to XGA
Plug & Play VESA DDC2BPower Management VESA DPMSAudio Amp 8W + 8W (8 Ω)
TerminalsAC IN 3PINVIDEO1 IN VIDEO / S-VIDEO (RCA type / Mini DIN 4pin type)
AUDIO R and L (MONO) (RCA type)VIDEO2 IN VIDEO / S-VIDEO (BNC type / Mini DIN 4pin type)
AUDIO R and L (RCA type)COMPONENT/RGB IN R, G, B, VD, HD / Y, Pb/Cb, Pr/Cr (BNC type)
AUDIO R and L (RCA type)PC IN RGB (D-SUB 15pin)
AUDIO R / L (Stereo Mini jack)RS232C IN RS232C (D-SUB 9pin)WIRED RC IN Stereo Mini JackMONITOR OUT VIDEO (RCA type)
AUDIO R and L (RCA type)HEADPHONE OUT Stereo Mini JackEXT. SP OUT R and L, 8W (8 Ω), Push type
POWER SUPPLY AC 220 - 240V 50/60 Hz (PDP-32H1EV, PDP-32H1E)AC 100 - 240V 50/60 Hz (PDP-32H1A)
DIMENSION (W x H x D) 829 x 517 x 122 mm ( 32.6" x 20.4" x 4.8" ) (Plasma Monitor only)WEIGHT (NET) 25 kg ( 55.1 lbs ) (Plasma Monitor only)Power Consumption 240 WRegulations FCC CLASS-B, UL, CEEnvironmental Considerations
Operating Temperature 0˚C ~ 40˚C (32˚F ~ 104˚F )Humidity 20 ~ 80%Altitude 0 ~ 2,000 m (0 ~ 6,560 ft)
Storage Temperature -10˚C ~ 50˚C (14˚F ~ 122˚F)Humidity 20 ~ 80 %Altitude 0 ~ 3,000 m (0 ~ 9,840 ft)
Accessories Owner’s ManualAC Power CordWired/Wireless Remote Control Transmitter and BatteriesPC Cable (D-SUB)Remote Control CableBNC / RCA Adapter ( x4)Ferrite core
Those terminals are not provided on model PDP-32H1E. Specifications are subject to change without notice.
-4-
829(32.6)
829(32.6)
517(20.4)
122(4.8)
101(4.0)
Size in mm (inch)
The products listed below are optionally supplied. When ordering these products, give name and Type No. to sales dealer.
OPTIONS
Speaker unit KA-SX-32H (R and L)Table top stand KA-TD-H10SFloor stand KA-TD-H10WSide rack KA-TD-R100Tilt mount unit KA-TI-H10Wall mount unit KA-WA-H10WVCeiling mount unit KA-CH-H10
MEASUREMENT
Dimensions and Options
MEASUREMENT
OPTIONS
-5-
RS232C TERMINALTerminal : HDB9-PIN Connect the serial port of computer to this terminal with Serial Cross Cable (not supplied).
3
5
4
2
1
7
9
8
6
No Connect
Ground
R x D
DTR (5V)T x D
1
5
2
43
DSRNo Connect
No ConnectNo Connect
67
98
Pin Configuration
CONFIGURATIONS OF RS232C TERMINALS
RS232C COMMAND(ASCII)
C09
C03
C01C00
C0AC0BC22C23
C0F
C24
C10C25
C26C27C28C29
C5F
C30
C47C46
C60
OPERATION
VOLUME UP
POWER ON-OFF
POWER OFFPOWER ON
VOLUME DOWNMUTEINPUT (Input signal select)INPUT "VIDEO" (VIDEO1 / VIDEO2)
PC IN (D-SUB) TERMINALTerminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (supplied). When connecting the Macintoshcomputer, the MAC Adapter (not supplied) is required.
5 123410 9 678
15 14 13 1112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2Blue Input
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
No Connect
Horiz. sync.
Ground (Vert.sync.)
Sense 1Sense 0
Vert. sync.Reserved
9
13
10
1211
1415
Pin Configuration
MAC ADAPTER (NOT SUPPLIED)
Set Slide Switches as shown in the table below depending on RESOLUTION MODE that you want to use beforeyou turn-on Plasma Monitor and computer.
ON
1
DIP
ON
OFF
2 3 4 5 6
13” MODE (640 x 480)
16” MODE (832 x 624)
19” MODE (1024 x 768)
21” MODE (1152 x 870)
ON
OFF
OFF
ON
ON
ON
ON
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1 2 3 4 5 6
Slide Switches (1 ~ 6)
Terminals for PC
-7-
Mechanical Disassemblies
Optional Stand Removal
1.Put the PDP Monitor Display with the screen face downon the flat desk.
CAUTION : When placing the display with the face down,lay the soft cloth under the screen to protectthe screen surface. And make sure there isnothing to damage the screen surface like ascrew or small part near by before placing thedisplay.
2.Remove 6 Screws (A). (Fig. 1)
Optional Speaker Removal
Fig. 2
Fig. 1
A
1.Remove speaker lead wires (R & L).2.Remove 16 Screws (B) and 4 plates. (Fig. 2)
B
1. Cabinet Back Removal (Fig. 3)Remove screws (A,B,C) and remove Cabinet Back as Fig. 3.
A (14pcs: 4X8), B (10pcs: 5X8), C (2pcs: 3X8)
A A A A
A A A A
A
A
A
A
A
AB
B
B
B
B
B
B B
B
B
C C
Fig. 3
-8-
Cjbg
ZT[Ajbg
ZT[Bjbg
d„XCb‘jbg
RC&LEDjbg
RlNgjbg [~iAjbg
[~iBjbg
d„jbg
„”‘[i[jbg
pt@pt@
LrlbgOg
Fig. 4
Location of Circuit Board and Others
Audio Unit
FAN
Main Unit
FAN Power Unit
Cabinet FrontSensor Unit (A)
Power SW
UnitRC & LED
UnitConnect Unit
Terminal A Unit
Terminal B Unit
Mechanical Disassemblies
-9-
2. Panel Module and Chassis Removal (Fig. 5)1) Remove 16 screws (D: 4X8). (Fig. 5)2) Remove Flat Cable from Button Unit (Position + / -, Volume + / - ...etc.) to Audio Unit (K8X).3) Remove chassis with Panel Module to have Panel Holder and lift up.4) Place chassis with the face down to the desk with soft cloth.
[ATTENTION]As R/C Pre-AMP is projected from surface of panel, it is necessary to place out of desk.
plz_[
RlN^K8X
RvAv
LrlbgOg
DDD
D D D D D D D D
D D D D DFig. 5
[ATTENTION]This PDP monitor is used the different kind of screw. Using correct screw is needed to avoid the damage.
Panel HolderCabinet Front
R/C Pre-AMP[ATTENTION]
Connector
K8X
Panel
Desk
Mechanical Disassemblies
-10-
E EF
pt@ pt@
G
G
G
G
F
plz_[
3. Chassis Removal (Fig. 6)To remove chassis from Panel Module.1) Remove screws (E & F) and remove FANs with holder plate from chassis.2) Remove screws (G) and remove Panel Holder and Spacer (between holder and module) from chassis.E (2pcs: 4X8 + 2 washers), F (2pcs: 3X6), G (4pcs: 5X40)
Fig. 6
Panel Holder
FANFAN
Mechanical Disassemblies
-11-
H H H H H HI
I I
I
H H H H H H
CjbgRlN^K7SAK3ST
d„jbgRlNKPOW2 AK6UAKPOW 3
ZT[jbgARlNKSEN S1
'˛R[h2˘˜¢ØXN[„”‘[i[
jbg
ZplW
ZplW
3) Slightly lift up the chassis from Panel Module after removing screws (H & I ) and 2 hexagonal screws.4) In the condition of item 3), remove lead wire from Main Unit (K7S,K3ST) to Panel Module. (Panel Module
Side).5) Remove screw fixed 2 yellow-green lead wire (ground) from AC power connector and Panel Module. (Fig.7)6) In the condition of item 3), remove lead wire from Audio Unit (K16Y) to Panel Module. (Panel Module Side).7) Remove connector of Power Unit (KPOW2, K6U,KPOW3) and Sensor Unit A (KSENS1)8) To lift up chassis, remove from Panel Module.H (14pcs: 6X12), I (4pcs: 5X8)
Power UnitConnectorKPOW2,K6U,KPOW3
Main UnitConnectorK7S,K3ST
Sensor Unit (A)ConnectorKSENS1
Audio UnitConnector
K16Y
Screw for Fixing
Yellow-Green
WiresHexagonal
ScrewHexagonal
Screw
Mechanical Disassemblies
HH
Fig. 7
-12-
d„jbg
ZT[Ajbg
J
K K K
J
ZplW
ZplW
Fig. 8
9) Remove screws (J & K), and remove Power Unit and Sensor Unit (A) with holder plate from PanelModule. Note: Fix screws (K) to Panel Module after removing these units.
10) Remove 2 hexagonal screws to be only Panel Module.J (2pcs: 3X8), I (3pcs)
Hexagonal
Screw
Hexagonal
Screw
Sensor Unit (A)
Power Unit
Mechanical Disassemblies
[NOTE]Can not clean after assembling Panel Module, if caught dust to Panel surface or Optical Filter.
-13-
4. Optical Filter Removal
Cabinet Front includes Optical Filter to protect thedamage of Panel, improve picture quality, or pre-
vent exposure of interference. For removal of Optical Filter, remove screws ofFig.9.
[NOTE]1. The Optical Filter is easy to be damaged. Do
not touch directly by hand. If there is dust,remove it by watery neutral detergent.
2. The gasket (like brown tape) is sticked on theOptical Filter. Order Optical Filter with gasketsfor service parts. Refer to parts list.
5. Servicing of Unit (Refer to Fig.4)For removal of Main or Audio Unit, remove screws fixed to chassis plate.In case of Audio Unit, remove shield plate covered with Line Filters (LF1601, LF1602, LF1603).Note : The shield plate is soldered at left side of circuit board.
6. Servicing of Back TerminalFor removal of Connect Unit, remove 25 screws (L: 3X6) of Fig.10.Note : Terminal Unit (A, B) is connected to Connect Unit.
Fig. 9
PDP Panel Replacement
For change of PDP Panel (Module), proceed 1 to 3.
Mechanical Disassemblies
L
L
L
L
Fig. 10
Gasket
-14-
Flat Cable RemovalThis set is used 3 kinds of connector for flat cable. For removal of cable, refer as below not to damage.
For GasketThe gasket (like brown tape) is provided to prevent exposure of interference for other radio and television receptions.
The gasket should be replaced on previous positions after servicing.
See Fig.9 for example.
For removal of flat cable, slide hook of
both sides.
For insert and fixing, slide hook to pre-
vious position after inserting the flat
cable.
Type A Type B Type C
For removal of flat cable, lift up hook of
both sides.
For insert and fixing, hold down hook
after inserting the flat cable.
For removal of flat cable, pull off only.
For fixing , insert into socket.
Cable Cable Cable
Mechanical Disassemblies
-15-
Notice for service of UnitIn below Unit, can be repaired inside parts or unit itself. Order service parts for repair.
Cjbg
ZT[Ajbg
ZT[Bjbg
d„XCb‘jbg
RC&LEDjbg
RlNgjbg [~iAjbg
[~iBjbg
d„jbg
„”‘[i[jbg
pt@pt@
LrlbgOg
Power Unit
Sensor A
UnitAudio Unit
Main Unit
RC&LED
Unit
Power
Switch
Unit
Connect Unit
Terminal A Unit
Terminal B Unit
Mechanical Disassemblies
-16-
d„jbg
ZT[Ajbg
J
K K K
J
ZplW
ZplW
Mechanical Disassemblies
Do not remove Panel only.For changing Panel, it is necessary to changethese all units too.Refer to parts list.
AttentionBelow 4 Units are included with Panel for PDP Module. Do not remove from Panel.For changing Panel, it is necessary to change these all units too.Can not order unit itself.
!
-17-
Adjustment
Before AdjustmentThis adjustment is done to enter Service Mode by Remote
Control Unit.
To enter Service ModeQuick operation is needed to enter Service Mode.(1) Turn the monitor on.(2) Press and hold the MENU button on the monitor.(3) Keep item (2) and press the STATUS button and
release the both buttons.(4) Within 2 seconds after item (3), press the MUTE
button to appear the Service Mode Display.
Service Mode Display
To return to the Normal Mode
Once turn the Monitor off by pressing “POWER” button on the monitor or remote control unit and turn it on again.
MENU OKINPUT VOLUME
MENU Button
MUTE
WIDE
INPUT
ON-OFF
VOLUMEPC/RGB
F
COMPONENT
OFF TIMER
PICTURE
STATUS
MOVE UP
MOVE DOWN
VIDEO
OK
OFF
ON
POWER
MENU
(←) / (→)To select :
Adjustment Item
or Data Setting
To enterService Mode
STATUS
MUTE
(↑) Adjustment :
UP
Data Setting
(+)
(↓) Adjustment :
DOWN
Data Setting
(–)
Av-Dynamic
Cont0 63 (3F)
Main
Sub
32H1103
040
CAUTIONThe each circuit has been made by the fine adjustment at factory. Do not attempt to adjustthe following adjustments except requiring the readjustments in servicing otherwise it maycause loss of performance and product safety.
-18-
To adjustThe next 2 pages show Data for adjustment.
To select adjustment item, press (↑) button on the remote control unit.
To adjust data, press (→) button ( The characters of data become yellow.) and press (↑) or (↓) button to
change data.
The all data adjusted in service mode memorizes into non-volatile memory IC.
Note: In the explanation all buttons are indicated for remote control unit without any notice.
Service Mode Display
Av-Dynamic
1) Select adjustment item by (↑) but-
ton.Adjustment item displays in order. To reverse
adjustment item, press (↓) button.
3) Adjust the data by (↑) (↓) button.To adjust another item, press (←) button to
change color of characters of adjustment item
and repeat 1) to 3).
Select by (↑) Button
and
Press (→) Button( )Hex decimal data
Adjust by (↑) or
(↓) Button.
4) To exit the Service Mode.To exit the service mode, press POWER ON-
OFF button on the monitor or remote control
unit.
2) Press (→) button to change color
of characters (of data).The character of data become yellow by pressing
(→) button.
0 Cont 63 (3F)
Adjustment Item DataNumber
Av-Dynamic
Cont0 63 (3F)
Main
Sub
32H1103
040
Adjustment
-19-
0 AV-Dynamic Contrast 63 0 63 Picture Menu (Dynamic)1 Brightness 31 0 632 Color 52 0 633 Tint 0 -31 324 Sharpness 19 0 305 AV Standard Contrast 50 0 63 Picture Menu (Natural)6 Brightness 31 0 637 Color 38 0 638 Tint 0 -31 329 Sharpness 15 0 3010 AV Cinema Contrast 37 0 63 Picture Menu (Cinema)11 Brightness 32 0 6312 Color 35 0 6313 Tint 0 -31 3214 Sharpness 13 0 3015 PC Graphic Contrast 63 0 63 Picture Menu (Graphic)16 Brightness 31 0 6317 Color 45 0 6318 Tint 0 -31 3219 --------------- -- -- --20 PC Standard Contrast 40 0 63 Picture Menu (Standard)21 Brightness 31 0 6322 Color 31 0 6323 Tint 0 -31 3224 --------------- -- -- --25 PC-Text Contrast 31 0 63 Picture Menu (Text)26 Brightness 31 0 6327 Color 26 0 6328 Tint 0 -31 3229 --------------- -- -- --30 Sub Menu AV Contrast 60h 00h FFh Composite, S-Video31 Brightness 37h 00h FFh32 Color-S 78h 00h FFh S-Video33 --------------- -- -- --34 Tint FFh 80h 7Fh35 Sharpness 0Fh 00h 1Fh 0Fh=9415add.5Dh:78h36 Sub Menu PC Contrast 60h 00h FFh37 Brightness 39h 00h FFh38 Color 80h 00h FFh39 Tint 00h 80h 7Fh40 Sharpness 40h 00h FFh41 Sub Menu AV-D2-D4 Contrast 5Bh 00h FFh D2–4 Input42 Brightness 40h 00h FFh43 Color 80h 00h FFh44 Tint FAh 80h 7Fh45 Sharpness 40h 00h FFh46 Sub Menu AV-D1 Contrast 60h 00h FFh D1 Input (480i)47 Brightness 40h 00h FFh48 Color C0h 00h FFh49 Tint 00h 80h 7Fh50 Sharpness 0Ch 00h 1Fh 0Fh=9415add.5Dh:78h51 Color Temp H-AV Red DCh 00h FFh AV Color Temperature (High)52 Green F0h 00h FFh53 Blue FFh 00h FFh54 Color Temp M-AV Red FFh 00h FFh AV Color Temperature (STD)55 Green FFh 00h FFh
Service Adjustment Data TableAdjustment
• All data except in gray box area is fixed. Do not change for correct operating.• Data in gray box area is initial. Can be set according to adjustment information.
No. NoteAdjustment NameData Area
Adjustment ItemInitialData
Min Max
-20-
56 Blue FFh 00h FFh57 Color Temp L-AV Red FFh 00h FFh AV Color Temperature (Low)58 Green EBh 00h FFh59 Blue CDh 00h FFh60 Color Temp H-PC Red DCh 00h FFh PC Color Temperature (High)61 Green F0h 00h FFh62 Blue FFh 00h FFh63 Color Temp M-PC Red FFh 00h FFh PC Color Temperature (STD)64 Green FFh 00h FFh65 Blue FFh 00h FFh66 Color Temp L-PC Red FFh 00h FFh PC Color Temperature (Low)67 Green EBh 00h FFh68 Blue CDh 00h FFh69 Cont AV Red FFh 00h FFh White Balance Adjustment70 Green FFh 00h FFh71 Blue FFh 00h FFh72 Bright AV Red 80h 00h FFh Black Balance Adjustment73 Green 80h 00h FFh74 Blue 80h 00h FFh75 Cont PC Red 00h 00h FFh W/B (Differential Data to AV)76 Green 00h 00h FFh77 Blue 00h 00h FFh78 Bright PC Red 00h 00h FFh B/B (Differential Data to AV)79 Green 00h 00h FFh80 Blue 00h 00h FFh81 Cont PC Red 00h 00h FFh W/B (Differential Data to AV)82 Green 00h 00h FFh83 Blue 00h 00h FFh84 Bright PC Red 00h 00h FFh B/B (Differential Data to AV)85 Green 00h 00h FFh86 Blue 00h 00h FFh87 Cont-AV-D1 Red FEh 00h FFh W/B (Differential Data to AV)88 Green 05h 00h FFh89 Blue 00h 00h FFh90 Bright-AV-D1 Red 00h 00h FFh B/B (Differential Data to AV)91 Green 00h 00h FFh92 Blue 00h 00h FFh93 Sharpness-AV50 Sharpness 10 0 – Filter94 Sharpness-AV60 Sharpness 6 0 – Filter95 Sharpness-PC Sharpness 0 0 – Filter96 Sharpness-HD Sharpness 10 0 – Filter97 Snd-Sep Snd Sep 3Fh 0 3Fh Sound Separation98 AFC Tuning-TV ABh 21Ch 000h FFFh99 ACh 218h 000h FFFh100 AFC Tuning-Video50 ABh 21Ch 000h FFFh101 ACh 21Ch 000h FFFh102 AFC Tuning-Video60 ABh 21Ch 000h FFFh103 ACh 21Ch 000h FFFh104 AFC Tuning-Video BEh 06h 00h FFh105 AFC Tuning-D1 ABh 298h 000h FFFh106 ACh 5D1h 000h FFFh107 AFC Tuning-525i ABh 298h 000h FFFh108 ACh 5D1h 000h FFFh109 Color System Auto Auto/NTSC only110 Wide Squeeze Off Off/On111 Display Language English English/Japanese112 PDP COLOR8 PDP Internal Pattern Display (∆ Key)113 PDP WHITE PDP Internal Pattern Display (∆ Key)
Adjustment
No. NoteAdjustment NameData Area
Adjustment ItemInitialData
Min Max
-21-
Setting the fixed data
(1) Receive the good quality signal.(2) Enter the Service Mode(3) Confirm fixed data to be same as data table. If it is different, change to
correct data.(4) Return to the Normal Mode
This adjustment is controlled by the CPU (IC801) thorough the IIC Data Bus Line in the chassis, and thoseadjustment data are memorized into the memory IC (IC808). Therefore, Audio Board or the memory IC(IC808) is replaced, data of those will be disappeared. Readjustment should be made. Initial data isprovided in the CPU ROM ,when memory IC (IC808) is replaced with new one, CPU ROM data is loadedinto the memory. (Data list will be shown in previous 2 pages.) Initial data is provided to operating themonitor basically. For operating the monitor quality performance, further adjustment required followingchassis electrical adjustment.
Adjustment : Enter the service mode, select item No. 69 [ Red ], 70 [ Green ] or 71 [ Blue ] (Cont AV), and
adjust a proper white balance.
Note : After adjustment, confirm white balance again by normal picture.
Input Signal : 1.0Vp-p / 75Ω terminated
-22-
TERM B
AV2 CVBS2
Y/C2MONTOROUT M/O CVBS
AV4
TERM A
AV1 CVBS1
Y/C1
PC1R1
G1
B1
MAIN
CVBS2
Y/C2
CVBS1
Y/C1
M/O CVBS
IC1001AV SWITCH
R/Pr/Cr4
G/Y4
B/Pb/Cb4
R1
G1
B1
IC1123RGB, COMP. SWITCH
R/Pr/Cr
G/Y
B/Pb/Cb
IC1124RGB, COMP. SWITCH
CVBS
Y/C
Y/Cb/Cr
IC401DIGITALDECODER
CVBS
IC7101NTSC3D Y/CSEPARATION
Y/C
IC501I/PCONVERTER
IC207A/DCONVERTER
IC601RGB MATRIX
IC301MAIN SCALER
IC751LVDSINTERFACE
PDPPANEL
Y/Cb/Cr
RGBY/Pb/PrY/Cb/Cr RGB
Y/Pb/Pr
Y/Pb/Pr
RGB
RGB
79(Y)11(C)
49(Y)51(C)
13(Y)5(C)
84(Y),83(C)
73(Y)71(C)
75
6(Cr)5(Y)4(Cb)
1(R/Pr/Cr)5(G/Y)4(B/Pb/Cb)
7(R/Pr)15(G/Y)22(B/Pb)
7
9
10
1
3
5
21
19
15
5356(Y)58(C)
211915
R/Pr/Cr4
G/Y4
B/Pb/Cb4
RGBY/Pb/PrY/Cb/Cr
88
Circuit Block Diagram
VideoSignal Flow
(1) CVBS, Y/CCVBS (Composite Video) or Y/C signal from AV1 or AV2 terminal is input to AV SW IC (IC1001) and selected
signal.
CVBS signal selected by IC1001 is input to 3 Dimension Y/C Separation IC (IC7101) and input to IC1001 again.
(In case of NTSC Signal) On the other hand it is input to Digital Decoder IC (IC401) and output for Monitor Out
signal (CVBS only).
(2) RGB, ComponentRGB or Component signal from PC1 or PC2 (AV4) terminal is input to RGB / Component SW IC (IC1123,
IC1124) and selected signal.
(3) Decoder, I/P ConversionCVBS or Y/C signal from IC1001 or Component signal (480i) from IC1124 input to Digital Decoder IC (IC401).
Component signal from IC401 is input to I/P (interlace / Progressive) Conversion IC (IC501) and converted.
(4) A/D ConversionRGB ( or Progressive Component) signal from IC1124 is input A/D Conversion IC (IC207) and converted.
(5) Panel DriveSignal from IC501 or IC207 is input to RGB Matrix IC (IC601) and proceeded for picture control.
Signal from IC601 is input to Main Scaler IC (IC301) and LVDS Interface IC (IC751) and input to PDP Panel
Module.
-23-
Circuit Block Diagram
Audio
AUDIO
TERM AAV1
L
R
L
RPC1
TERM B
AV2L
R
MONITOROUT
L
R
AV4L
R
IC001AUDIO CONTROL
MAIN
L
R
L
R
L
R
L
R
L R
IC10
01A
V S
WIT
CH
2(L),4(R)
AV1
8(L),10(R)
AV2
5(L),14(R)
PC1
1(L),12(R)
PC2(AV4)
3(L),13(R)
59(L),61(R)
PC
IC1002SWITCH
52(L),54(R)L
R
MONITOR
L
RSELECTED
23(L),2(R)
IC002Q-SOUND
13(L),11(R)
6(L),2(R)
7(L),1(R)
SURROUND
IC003AMP
22(L),21(R)
SURROUND
16(L),15(R)EFFECTED
1(L),24(R)
6(L),19(R)
IC121BBE
BBE7(L),1(R)
6(L),2(R)
IC031HEAD PHONEAMP
25(L),20(R)23(L),22(R)
10(L),13(R)
IC071MAIN DIGITALAMP
+-
L
R
L
R
HEAD PHONE
SPEAKER X2
Signal FlowSound signals (L & R) from AV1 or AV2 are input to AV SW IC (IC1001) and selected.Sound signals from PC1 or PC2 (AV4) are input to IC1001 too after selected by SW IC (IC1002) .The selected signals are output to Monitor Out and also input to below ICs.
Q-Sound IC (IC002) AMP IC (IC003) Audio Control IC (IC001) BBE IC (IC121)Finally signals from IC121 are input to Digital AMP IC (IC071) for speakers and AMP IC (IC031) for HeadPhone.
-24-
Line
Filt
erLF
1061
/2/3
AC
IN AC
/DC
BO
AR
DT
his
boar
d is
incl
uded
with
FP
D m
odul
e.
Mai
nV
olta
geO
utpu
t
Sta
nd-b
yV
olta
geO
utpu
t
370V
DC
in
Sw
itchi
ngR
egul
ator
IC16
11T
611
11,1
213 9
7
IC16
339V 12
V
30V
-5V
Vol
tage
Det
ecto
rIC
1631
IC16
32Q
1631
6V 3.3V
AS
SY
PW
B P
OW
ER
FAN
1,2
-5V
9V12V
30V
6VFAN
Driv
eIC
1823
Sen
sor
1IC
1981
IC15
15V
FAN
Sen
sor
Con
trol
IC18
21,1
822
Sou
nd A
MP.
IC07
1,00
3
Aud
io S
witc
hA
udio
Con
trol
ler
Sur
roun
dIC
001,
121,
002
3.3V
1
5VS
T
Vol
tage
Con
vert
or (
Fact
ory
Dat
a)IC
823
Hea
d P
hone
AM
P.IC
031
CP
U a
nd O
ther
sIC
801,
802,
803.
..
RC
&LE
DA
1951
SW
ITC
H(K
ey)
3.3V
1
5VS
T
9V 6V 3.3V
RG
B P
roce
ssor
IC11
22,1
123,
1124
AV
Sw
itch
IC10
01
IC34
15V
IC30
22.
5VS
T
Syn
c. P
roce
ssor
IC12
01
Line
Sw
itch
IC10
03,1
004
Syn
c. P
roce
ssor
IC89
71
IC70
812.
5VG
R
IC70
803.
3YC
NT
SC
3D
Y/C
(N
oise
R
educ
tion)
, Sys
tem
Res
etIC
7101
, IC
8902
...et
c
AV
TE
RM
INA
LE
EP
RO
MIC
1951
Dig
ital D
ecod
erIC
401
I / P
Con
vert
erIC
501
PAN
EL
Con
trol
ler
IC30
1
IC30
3,30
4,30
6,IC
307,
308,
331,
IC60
2,75
1(LV
BS
)
Syn
c. P
roce
ssor
IC14
01IC
1401
TM
(R
OM
)
A/D
Cov
erte
rIC
207
IC20
1,20
2,20
3
RG
B P
roce
ssor
IC60
1F
lat P
anel
Driv
ing
Circ
uit
IC20
4/8/
9
IC60
62.
5V -5V
AS
SY
PW
B M
AIN
AS
SY
PW
B A
UD
IO
P
ower
ON
/OF
F T
able
Line
O
n O
ff S
tand
-by
CP
UG
O(I
C80
1 48
)P
DP
GO
(IC
801
49 )
HL
HL
H L
K8D
K3D
K7S
PAN
EL
LOG
ICB
OA
RD
IC20
63.
3V
: Pro
tect
ed b
y P
ower
Fai
l Lin
e 3.
: Pro
tect
ed b
y P
ower
Fai
l Lin
e 1.
Not
e
K8P
O2
KP
OW
ER
3
1 12 79 13
31K8T
K3T
K3S
TS
13
K3U
1 4 8
1 4 8
K6U
KP
OW
2
1
KP
OW
3
2 97 1
[NOTE]
Refer to next page for Power Fail Circuit
Power Supply Lines
-25-
IC801
52 FAN Fail Detect (To IC1821 37 )FAN FAIL
55 Sound AMP. Fail Detect (To IC071 17 )P FAIL 2
56 Power Fail Detect (ASSY PWB AUDIO)P FAIL 3
D1865 9V
D1863/4 12V
D1861/2 30V
54 Power Fail Detect (ASSY PWB MAIN)P FAIL 1
D105 5V
D7082/3 2.5VGR
D201/2 3.3V
(ASSY PWB AUDIO)
Q1861/2 (ASSY PWB AUDIO) (To IC207)
D603/4 3.3V
D601/2 2.5V
78 Temperature Fail Detect (To IC1821 38 )TEM. FAIL
D301/2 2.5VST
D7080/1 3.3VYC
Power Fail Circuit
CPU (IC801) is programmed that the set goes to standby mode when there is circuit fail as
below.1. AUDIO AMP FAIL(2) : Detected the fail of Audio AMP IC (IC071)
2. POWER FAIL (3) : Detected the voltage fail in Audio Unit (3 points)
3. POWER FAIL (1) : Detected the voltage fail in Audio Unit (1 point) and Main Unit (6 points).
4. OTHERS
TEMPERATURE FAIL : Detected the temperature fail ( about 80 degree) by thermal sensor IC (IC1981). CPU
communicates to FAN & Sensor Control IC (IC1821) for detection.
FAN FAIL : Detected the fan fail by the communication to FAN & Sensor Control IC (IC1821).
(The set does not go to standby mode in this fail. Display Only.)
-26-
Power Fail Circuit
When operating the Power Fail Circuit, On-Screen-Display message or LED flashing time is
shown as below.
On-Screen-Display Message1. FAN FAIL
When the cooling fan is trouble, below message is displayed. This message is displayed for 10 seconds in
every 10 minutes.
2. TEMPERATURE FAILWhen the internal temperature exceeds normal ( approximately more than 80 degrees ), below message is
displayed for 10 seconds and the Plasma monitor will be turned off automatically.
LED Flashing1. TEMPERATURE FAIL : The color of LED is ‘RED’.
2. POWER FAIL : The color of LED is ‘GREEN’.
3. SOUND AMP FAIL : The color of LED is ‘YELLOW’.
Warning!
Internal fan is trouble, not working properly.
Warning!
Internal temperature is too high.
Time of flashing Fail Name
2 Temperature
Time of flashing Fail Number
1 P FAIL 1
2 P FAIL 3
3 P FAIL 1 & 3
Time of flashing Fail Number
1 P FAIL 2
Note:1. In case of overlapped fail, 1 to 3 is repeated in turn.
2. If power fail is detected 3 times in 15 minutes, the monitor will stop operating.
3. If pull the AC cord, the information of these fails will be disappeared.
-27-
Troubleshooting
No PowerRefer to Schematic Diagram or Power Supply Line, find out the part of trouble.
In advance check the AC cord and power SW to be on.
Is LED flashed?No
Is fuse (F001) in Audio Unit
broken?
Power circuit of PDP moduleis broken.
Yes
Check '5VST' line in Audio or Main Unit.
NoAre voltages of all linein Power Unit supplied?
Yes
All 0V
No(or less)
Check parts around IC1611or IC1613 in Power Unit.
Yes (370V)
Yes(or voltages of some line are not supplied.)
Check 'Fail' Circuit to referservice manual.
Power circuit of PDP moduleis broken.
Are voltages of 'K6C:1pin' in Power Unit
supplied?
No PictureRefer to Schematic Diagram or Chassis Block Diagram, find out the part of trouble.
In advance check the setting mode according to Instruction Manual.
All mode?Check around IC601,IC301,IC751, or PDP panel moduleis broken.
Yes
No
AV1, AV2
PC1,PC2(AV4)
Is therevideo signal ofmonitor out?
No
Check around IC401or IC501 in Main Unit.
YesIs theresignal from IC1123(15,19,21) in Main
Unit ?
480i ?Yes
Yes
No
No
Check around IC1123 in Main Unit. Also check the line from PC1 or AV4 to IC1123.
No
Check around IC207 in Main Unit.
Check around IC1001or IC7101 in Main Unit.
Check around IC1124 in Main Unit.
Is theresignal from IC1124(15,19,21) in Main
Unit ?
Yes
-28-
Troubleshooting
No SoundRefer to Schematic Diagram or Chassis Block Diagram, find out the part of trouble.
In advance check the setting mode according to Instruction Manual.
All mode? Check around IC031 in Audio Unit.
Yes
No
PC1, PC2(AV4)
AV1, AV2
Is theresound signal from
headphone
No(Speaker output is O.K.)
No
Yes
Yes
Is theresound signal from
monitor out
Check around IC1001 in Audio Unit.
Check the line from monitor out to speakervia IC002, IC003, IC001, IC121and IC071 in Audio Unit.
Check around IC1002 in Main Unit. Also check the line from IC1001 to PC1 or AV4 via IC1002.
Check the line fromIC1001 in Main Unit to AV1 or AV2.
-29-
System Control (CPU : IC801)
Control Port Functions
Pin Name Function I/O Description Note
pin 1 PA3/WR F-CLK I CLOCK for Flash Writingpin 2 PA4/RD F-DATA I DATA for Flash Writingpin 3 PA5/RS F-ENABLE I ENABLE for Flash Writing Pull-Uppin 4 P70/INT0 CHIP SEL I CHIP SELECT (Communication to PIXEL) Pull-Uppin 5 P71/INT1 V-SYNC I V-SYNC Input (PC/NTSC) NTSC: Positive PC:Depending on inputpin 6 P72/INT2 H-SYNC I H-SYNC Input (PC/NTSC) NTSC: Positive PC:Depending on inputpin 7 P73/INT3 RC I Remote Control Inputpin 8 RES RESET I RESET Input Normal : H Reset : Lpin 9 XT1 XT1 I XT1pin10 XT2 XT2 I XT2pin11 VSS1 VSS1 GNDpin12 CF1 CF1 I CF1pin13 CF2 CF2 I CF2pin14 VDD1 VDD1 +5Vpin15 P80/AN0 KEY-IN I Key Inputpin16 P81/AN1 LINE1/AV1S2 I DTV Mode : LINE1 / AV1 Aspect Ratiopin17 P82/AN2 LINE2/AV2S2 I DTV Mode : LINE2 / AV2 Aspect Ratiopin18 P83/AN3 LINE3/AV3S2 I DTV Mode : LINE3 / AV3 Aspect Ratiopin19 P84/AN4 N.C.pin20 P85/AN5 N.C.pin21 P86/AN6 N.C.pin22 P87/AN7 SENSOR I SENSOR Input :0 – 5V AD Input Pull-Up (Not Used)pin23 P30 BUS/OPEN I Open IIC, Write to EEPROM, Open=L Pull-Uppin24 P31 Q SOUND O Q–Sound ON/OFF Pull-Uppin25 P32 GIJI ST O Pseudo Stereo ON/OFF Pull-Uppin26 P33 BBE O BBEMachBASS IC CTL BBE ON/OFF Pull-Uppin27 P34 MachBASS O BBEMachBASS IC CTL Mach3Bass ON/OFF Pull-Uppin28 P10/SO0 DATA OUT O DATA OUT (Communication to PIXEL) Pull-Uppin29 P11/SI0 DATA IN I DATA IN (Communication to PIXEL) Pull-Uppin30 P12/SCK0 CLK I CLOCK (Communication to PIXEL) Pull-Uppin31 P13/SO1 RX SUB O RS-232Cpin32 P14/SI1 TX SUB I RS-232Cpin33 P15/SCK1 N.C. (Not Used)pin34 P16/T1PWML DPMS O DPMSpin35 P17/T1PWMH AMP MUTE O AMP Mute = Hpin36 SI2P0/SO2 PHONE I Head Phone Controlpin37 SI2P1/SI2 N.C. (Not Used)pin38 SI2P2/SCK2 N.C. (Not Used)pin39 SI2P3/SCK2 N.C. (Not Used)pin40 PWM1 O N.C. (Not Used)pin41 PWM0 O N.C. (Not Used)pin42 VDD2 VDD2 +5Vpin43 VSS2 VSS2 GNDpin44 P00 YELLOW O LED (Yellow) Output ON = H, OFF = L (Not Used)pin45 P01 GREEN O LED (Green) Output ON = H, OFF = L
-30-
Pin Name Function I/O Description Note
pin46 P02 RED O LED (Red) Output ON = H, OFF = Lpin47 P03 N.C. (Not Used)pin48 P04 POWER-1 O Power Control CPU-GOpin49 P05 POWER-2 O Power Control PDP-GOpin50 P06 SWA O PC1/PC2(BNC)Audio SW PC1=H, PC2=Lpin51 P07 SWB O PC1/PC2(BNC)Audio SW PC1=L, PC2=Lpin52 P20/INT4 FANFAIL I FUN / Panel Temperature Det. Normal = L Pull-Uppin53 P21/INT4 IRQ I Panel Condition Normal = Lpin54 P22/INT4 P-FAIL1 I Power Fail 1 Normal = H Pull-Up (Inside) pin55 P23/INT4 P-FAIL2 I Power Fail 2 Normal = L Pull-Up (Inside) pin56 P24/INT5 P-FAIL3 I Power Fail 3 Normal = H Pull-Up (Inside)pin57 P25/INT5 P-FAIL4 I (Not Used)pin58 P26/INT5 PWRSW I Main SW ON/OFFpin59 P27/INT5 AV4/5 O AV Switching CTL Line Signal AV4/AV5 SWpin60 PB7/D7 S2/D4 O AV Switching CTL For Aspect Ratio AV1/AV2/AV3 SWpin61 PB6/D6 N.C. (Not Used)pin62 PB5/D5 PCSW1 O PC Switching1 CTLpin63 PB4/D4 PCSW2 O PC Switching2 CTLpin64 PB3/D3 PCSW3 O PC Switching3 CTLpin65 PB2/D2 PCSW4 O PC Switching4 CTLpin66 PB1/D1 M MUTE O Monitor MUTE Pull-Uppin67 PB0/D0 O N.C. (Not Used)pin68 VSS3 VSS3 GNDpin69 VDD3 VDD3 +5Vpin70 PC7/A7 BOARD1 I Port for Boardpin71 PC6/A6 BOARD2 I Port for Boardpin72 PC5/A5 PW RET O PIXEL Reset (Low Reset) Pull-Uppin73 PC4/A4 PDWN O Power Down of LVDS Tx PD=L Pull-Uppin74 PC3/A3 IIC SCL O AV Switch CTL pin75 PC2/A2 IIC SDA I/O AV Switch CTL pin76 PC1/A1 N.C. (Not Used)pin77 PC0/A0 N.C. (Not Used)pin78 PA0/CS2 FANLOCK I FAN Stop Normal = Hpin79 PA1/CS1 FAN CTL1 O Forced FAN Control 1pin80 PA2/CS0 FAN CTL2 O Forced FAN Control 2
Control Port Functions
-31-
Digital Decoder (IC401: VPC3230D)
CIN
VIN1VIN2VIN3VIN4
VOUT
AnalogFront-end
AGC2XADC
AdaptiveCombFilter
NTSCPAL
ColourDecoder
SaturationTint
NTSCPAL
SECAM
Cr
Cb
Y Mixer
Cr
Cb
Y 2D Scaler
RIP
ContrastBrightness
Peaking
OutputFormatter
ITU-R 656ITU-R 601
MemoryControl
YOUT
Cr,CbOUT
YCOE
FIFOCNTL
RGB/YCrCb
FBRGB/YCrCb
AnalogComponentFront-End
4XADC
Y/G Processing
MatrixContrast
SaturationBrightness
Tint
U/B
U/R
FB
Y
Cr
Cb
FB
I2CBus Sync+
ClockGenerationClock
Gen.
CL Clock
H Sync
V Sync
AVO
20.25MHz I2CBus
IC Block Diagrams
3D Y/C Separation / Noise Reduction (IC7101: UPD64082GF)
Fig. No. Part No. Description Part No. Description
Center
Tape (Double Face)ButtonSee Electric Parts.
➈
(B)
(A)(C)
-41-
Electrical Parts List
Product safety should be considered when a component replacement is made in any area of a PDP monior. Components indicated by a mark in this parts list and the circuit diagram show components whose value havespecial significance to product safety. It is particularly recommended that only parts specified on the following partslist be used for components replacement pointed out by the mark.
!
Read description in the Capacitor and Resistor as follows:
CAPACITOR CERAMIC 100P K 50V
Rated Voltage
Tolerance Symbols:Less than 10pFA : Not specified B : ±0.1pF C : ±0.25pFD : ±0.5pF E : +0 -1pF F : ±1PFG : ±2pF H : +0.1 -0pF L : +0 -0.1pFR : ±0.25 -0pF S : +0-0.25pFMore than 10pFA : Not specified B : ±0.1% C : ±0.25%D : ±0.5% F : ±1% G : ±2%H : ±3% J : ±5% K : ±10%L : ±15% M : ±20% N : ±30%P : +100-0% Q : +30-10% T : +50-10%U : +75-10% V : +20-10% W : +100-10%X : +40-20% Y : +150-10% Z : +80-20%
Key No. Part No. Description Key No. Part No. Description
-61-
Electrical Parts List
SC1971 645 045 7449 SURGE-ABSORBER
SC1972 645 045 7449 SURGE-ABSORBER
SC1973 645 045 7449 SURGE-ABSORBER
SC1974 645 045 7449 SURGE-ABSORBER
SC1976 645 045 7449 SURGE-ABSORBER
Key No. Part No. Description Key No. Part No. Description
Parts Description and Reading in Schematic Diagram
-62-
1. The parts specification of resistors, capacitors andcoils are expressed in designated code. Please checkthe parts description by the following code table.
2. Some of transistors and diodes are indicated in markfor the substitution of parts name. Please check theparts name by the following code table.
3.Voltages and waveforms were taken with a video colorbar signal(1Vp-p at 75 ohms terminated) and controlsto normal.
4. Voltages were taken with a high-impedance digitalvoltmeter.
Example 2000 K K 1000 BG
CharacteristicExample 160 E M 10
Capacitance value
ToleranceTypeRated voltage
Excepting electric capacitors, allcapacitance values of less than 1are expressed in µF and morethan 1 are in pF.
Mark Tolerance (nH) Mark Tolerance (%)C ±0.25 G ±2D ±0.5 J ±5S ±0.3 K ±10A ±0.2 L ±15
M ±20
Coil Reading
Capacitor Reading
Example 1/2 D J 10K B
Example 6 W K 8.2
Example 1/2 C K 1M
Resistor Reading
Characteristic
Z (Carbon fuse)B (Non-burnable)
Resistance valueTolerance (see below table)Material (see below table)Rated wattage (W)
K indicates in KM indicate in M
Note: Resistor which is indicated with resistance value only are1/6W carbon resistor. Resistor which is indicated with materi-al, tolerance and value are 1/4W rated wattage.
Mark MaterialD CarbonN Metal filmS Oxide metal filmC SolidG Metal glaze W Wire wounding or cementH CeramicF Fusible
Mark ToleranceA ±0.05B ±0.1C ±0.25D ±0.5F ±1G ±2J ±5K ±10M ±20P +5 -15Z used in 0 ohm
Tolerance table
Material table
Material table
Mark Type numberR 1S2076A,1S2473,1N4148
AA 1S2076A,1S2473,1SS133,1N4148
Diode
Mark Type number-- 2SC536 2SC945A 2SC1815 2SC1740S
AD NF, NG PA, QA Y, GR Q, R, SAE NF, NG PA, QA, RA O, Y, GR Q, R, S
Transistor (1) NPN type
Diode/Transistor Type Reading
Mark Type number-- 2SA608 2SA564A 2SA1015 2SA933S
AB NF R Y, GR RAC NF Q, R O, Y, GR Q, R
(2) PNP type
Mark Type number-- 2SA1179/N 2SA1037K 2SA1037AK 2SC2812/N 2SC2412KAJ M6, M7 R, S R, SAH L6, L7 R, S
(3) Chip type
Tolerance table
Memo
DEC / 2001 / 335 Printed in Japan SANYO Electric Co., Ltd.