August 2009 28 1- ALUMINUM SINGLE HUNG WINDOW Series SH600 Monolithic glazing does not provide hurricane protection. Specifications: • Window members are extruded from a minimum of 6063-T5 aluminum alloy • Frame members have a nominal depth of 2 3 / 4" • Frame and sash interlock • Finish is white or bronze • Glazing is exterior • Locking hardware is deluxe swivel type • Balance system is spiral type • Screens are fitted at time of assembly Options: • Monolithic annealed 3 / 16" or 1 / 4" glass • Monolithic tempered 3 / 16" or 1 / 4" glass • 13 / 16” Insulating glass • Double applied colonial muntins • Ogee double applied muntins (ogee/flat bar) • Colonial insulating muntins/GBG • Popular glass tints • Pro-View (Oriel style) • Radius top • Bottom sash locks • Stainless steel assembly screws • Sizes: Commodity, modular, nominal and custom • 3 5 / 8" high rise sill • 1 / 2" flange frame • Nail fin frame • Premium frame color is clear anodize Notes: • Tested forced entry resistance to AAMA 1302.5-1976 Paragraph 3.1.1 test A through 3.1.5 test G • Deglazing tested to ASTM E987 • Tested water resistance to ASTM E547/E331 • Tested air infiltration to ASTM E283 • Test reports available upon request • Miami-Dade County approved (see approval for specific order options) Flange Frame: • Windows are tested in accordance with PA/TAS, 202 and specifications Nail Fin Frame: • Windows are tested in accordance withAAMA/NWWDA 101/I.S. 2-97 and PA/TAS 202 Clear opening formula for egress: Clear opening width = window width - 3.500" Clear opening height = With with EZ Lift balance and 2.830" sill = (window height / 2) - 6.299” With Ultra-Lift balance and 2.830" sill = (window height / 2) - 7.674” With EZ Lift balance and 3.446" sill = (window height / 2) - 7.243” With Ultra-Lift balance and 3.446" sill = (window height / 2) - 8.618” *Calculate from tip to tip window size. Nail fin window - add 1” to width and height then use formulas above Note: PGT reserves the right to change material design and/or construction without notice or liability. .500 2.710 1.749 2.438 .500 2.710 Window Width 1.749 2.438 .500 1.363 2.618 2.784 .500 2.975 Window Height
22
Embed
Series SH600 - EZEBreeze · ALUMINUM SINGLE HUNG WINDOW Series SH600 Monolithic glazing does not provide hurricane protection. Specifications: • Window members are extruded from
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
August 2009281-
ALUMINUM SINGLE HUNG WINDOWSeries SH600
Monolithic glazing does not provide hurricane protection.Specifications:
• Window members are extruded from a minimum of 6063-T5 aluminum alloy• Frame members have a nominal depth of 23/4"• Frame and sash interlock• Finish is white or bronze• Glazing is exterior• Locking hardware is deluxe swivel type• Balance system is spiral type• Screens are fitted at time of assembly
Options:
• Monolithic annealed 3/16" or 1/4" glass• Monolithic tempered 3/16" or 1/4" glass• 13/16” Insulating glass • Double applied colonial muntins• Ogee double applied muntins (ogee/flat bar)• Colonial insulating muntins/GBG• Popular glass tints• Pro-View (Oriel style)• Radius top• Bottom sash locks• Stainless steel assembly screws• Sizes: Commodity, modular, nominal and custom• 35/8" high rise sill• 1/2" flange frame• Nail fin frame• Premium frame color is clear anodize
Notes:
• Tested forced entry resistance to AAMA 1302.5-1976Paragraph 3.1.1 test A through 3.1.5 test G
• Deglazing tested to ASTM E987• Tested water resistance to ASTM E547/E331• Tested air infiltration to ASTM E283• Test reports available upon request• Miami-Dade County approved (see approval for specific order options)Flange Frame:
• Windows are tested in accordance with PA/TAS, 202 and specificationsNail Fin Frame:
• Windows are tested in accordance withAAMA/NWWDA 101/I.S. 2-97 and PA/TAS 202
Clear opening formula for egress:Clear opening width = window width - 3.500"
Clear opening height =With with EZ Lift balance and 2.830" sill = (window height / 2) - 6.299”With Ultra-Lift balance and 2.830" sill = (window height / 2) - 7.674”
With EZ Lift balance and 3.446" sill = (window height / 2) - 7.243”With Ultra-Lift balance and 3.446" sill = (window height / 2) - 8.618”
*Calculate from tip to tip window size.Nail fin window - add 1” to width and height then use formulas above
Note: PGT reserves the right to change material design and/or construction without notice or liability.
Panels and Frame1. Minimum size is 18" x 25"2. Maximum size is 53 1/8" x 76"3. All sizes standard 1/1; Proview with a standard sash height is no additional charge
* See page colonial configurations page in bold for a listing of standard proview sash heights4. Radius top (proview style only) - add $113 list
• See catalog pages 1-45 - 1-47 For RT colonial muntin designs and pricing5. Premium Frame Color is Clear Anodize
Glass6. Insulating glass make-up is 3/16" annealed/air/ 1/8" annealed
• 3/16" glass on both pieces of insulating glass - add 3/16" glass column to insulating price• Argon gas - add $7 list per lite (fixed + sash = 2 units)
• Tempered insulating glass - tempered price x 2 plus insulating price• Safety glazing requires tempered glass - specify when ordering• Double tints are N/A on IG• Low-E options below:
• Only available with IG• LWE (hard coat) - add Low-E up charge to IG option price• LEH (soft coat) - add Low-E up charge to IG option price• L24 (soft coat with grayish appearance) - add Low-E plus IG plus tinted base price column
• Meets turtle code specifications
Colonial Muntins7. Double applied ogee muntins: ogee outside/flat bar inside
• use the double applied colonial price plus 10%• for premium finish, use the premium finish muntin column plus 10%
8. Colonial 2/2 vertical or horizontal is 1/2 colonial up charge9.Custom colonial configurations - colonial up charge x 1 1/2
10. Premium frame color with CIG, use colonial insulating glass column
Miscellaneous11. 2020 mesh when ordered with window - DEDUCT price x212. To price custom size units go to next largest size width and height on custom price page13. Units that are 72" and greater in height, with a standard code size width, are priced as standard size units
see next largest size in Commodity or Modular pages for pricing
August 2009331-
Always check with your local building officials for compliance requirements.
* Egress opening is 5.0 square feet or greater with standard sill.** Egress opening is 5.7 square feet or greater with standard sill.
ALUMINUM SINGLE HUNG WINDOWCOMMODITY SIZES
Available in White & Bronze
List Price SERIES SH600
August 2009 341-
ALUMINUM SINGLE HUNG WINDOWMODULAR SIZES
Available in White & Bronze
List Price SERIES SH600
Always check with your local building officials for compliance requirements.
* Egress opening is 5.0 square feet or greater with standard sill.** Egress opening is 5.7 square feet or greater with standard sill.
August 2009351-
Always check with your local building officials for compliance requirements.
ALUMINUM SINGLE HUNG WINDOWCUSTOM SIZES
Available in White & Bronze
List Price SERIES SH600
August 2009 361-
WOOD FRAME OPENING 183/8 253/4 361/4 523/8
WO
OD
FR
AM
E
OP
EN
ING
WIN
DO
W
HE
IGH
T
ACTUAL WINDOW WIDTH (without fin) 181/8 251/2 36 521/8
COMMODITY
25 251/4
373/8 375/8
495/8 497/8
62 621/4
75 751/4
ALUMINUM SINGLE HUNG NAIL FIN FRAMESIZE CHART AND STANDARD COLONIAL CONFIGURATIONS
NOTE: Openings calculated using 1/8" shim space (maximum 1/4" allowed).