SSP Pumps Spare Parts List Sept 2009 (Issue 4.12) Birch Road, Eastbourne East Sussex BN23 6PQ, England Tel: +44(0)1323 414600 Series S Stainless Steel Positive Displacement Rotary Lobe Pumps Alfa Laval Ltd www.ssppumps.com Tel: 44(0)1323 414600 Fax: +44(0)1323 412515
79
Embed
Series S Spares - matrixps.com · Rotor, Trilobe, NBR covered S2-0013 5722.013 7 bar 70°C 5740.018M 7 bar 130°C 5740.018N 7 bar 200°C 5740.018P 10 bar 70°C 5740.018T 10 bar 130°C
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
NotesThis publication is strictly confidential and remains the property of Alfa Laval Ltd.without whose written permission it must not be copied, reproduced or shown tothird parties, and maybe subject to change without prior notice.
When identifying the spare parts required it is important to check the pumpspecification by referring to the pump serial number.
Plain 5130.312Drilled for jacket 5130.332Relief valve see page 63
13 Dome nut, rotorcase cover 4 5340.04714 Retainer, seal 2 5560.03115 Screw, seal retainer 6 5990.007
(not for ATEX) NBR 5310.038FPM 5310.071
10 bar 70°C 5740.013M10 bar 130°C 5740.013N10 bar 200°C 5740.013P15 bar 70°C 5740.013T15 bar 130°C 5740.013V15 bar 200°C 5740.013W10 bar 70°C 5741.013M10 bar 130°C 5741.013N10 bar 200°C 5741.013P15 bar 70°C 5741.013T15 bar 130°C 5741.013V15 bar 200°C 5741.013W10 bar 70°C 5761.013M10 bar 130°C 5761.013N10 bar 200°C 5761.013P15 bar 70°C 5761.013T15 bar 130°C 5761.013V15 bar 200°C 5761.013W
Rotor, Trilobe, NBR covered S2-0013 5722.0137 bar 70°C 5740.018M7 bar 130°C 5740.018N7 bar 200°C 5740.018P10 bar 70°C 5740.018T10 bar 130°C 5740.018V10 bar 200°C 5740.018W
S2-0013-H15 S2-0013-V15
Rotor, Trilobe Stainless Steel
S2-0018-H07 S2-0018-V07
S2-0018-H10 S2-0018-V10
217
Rotor, Trilobe Stainless Steel
S2-0013-H10 S2-0013-V10
S2-0013-H15 S2-0013-V15
Rotor, Bilobe Stainless Steel
S2-0013-H10 S2-0013-V10
S2-0013-H15 S2-0013-V15
Rotor, Bilobe non-galling
S2-0013-H10 S2-0013-V10
2
1
7
Shim 8
16
'O' Ring, cover - plain
Lip seal, gland end
'O' Ring, cover - relief valve
1
12 Cover, rotorcase
Lip seal, drive end
11
1
1 set
5 SSP/S/SPARES/0909
S2 Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.018M7 bar 130°C 5741.018N7 bar 200°C 5741.018P10 bar 70°C 5741.018T10 bar 130°C 5741.018V10 bar 200°C 5741.018W7 bar 70°C 5761.018M7 bar 130°C 5761.018N7 bar 200°C 5761.018P10 bar 70°C 5761.018T10 bar 130°C 5761.018V10 bar 200°C 5761.018W
Plain 5130.313For rectangular inlet 5130.343Drilled for jacket 5130.333Relief valve see page 63Std 8 5340.047For rectangular inlet 4 5340.022
14 Retainer, seal 2 5560.03215 Screw, seal retainer 6 5990.007
(not for ATEX) NBR 5310.039FPM 5310.072
10 bar 70°C 5740.027M10 bar 130°C 5740.027N10 bar 200°C 5740.027P15 bar 70°C 5740.027T15 bar 130°C 5740.027V15 bar 200°C 5740.027W10 bar 70°C 5741.027M10 bar 130°C 5741.027N10 bar 200°C 5741.027P15 bar 70°C 5741.027T15 bar 130°C 5741.027V15 bar 200°C 5741.027W10 bar 70°C 5761.027M10 bar 130°C 5761.027N10 bar 200°C 5761.027P15 bar 70°C 5761.027T15 bar 130°C 5761.027V15 bar 200°C 5761.027W
Rotor, Trilobe, NBR covered S3-0027 5722.027
Rotor, Trilobe Stainless Steel
Rotor, Bilobe Stainless Steel
Rotor, Bilobe non-galling
S3-0027-H10 S3-0027-V10
S3-0027-H15 S3-0027-V15
S3-0027-H10 S3-0027-V10
S3-0027-H15 S3-0027-V15
S3-0027-H10 S3-0027-V10
S3-0027-H15 S3-0027-V15
17 2
Cover, rotorcase 1
Lip seal, gland end16 2
12
13 Dome nut, rotorcase cover
1
'O' Ring, cover - relief valve
'O' Ring, cover - plain
11
10 Stud, rotorcase/cover retention
1
8 Shim 1 set
7 Lip seal, drive end
7 SSP/S/SPARES/0909
S3 Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5740.038M7 bar 130°C 5740.038N7 bar 200°C 5740.038P10 bar 70°C 5740.038T10 bar 130°C 5740.038V10 bar 200°C 5740.038W7 bar 70°C 5741.038M7 bar 130°C 5741.038N7 bar 200°C 5741.038P10 bar 70°C 5741.038T10 bar 130°C 5741.038V10 bar 200°C 5741.038W7 bar 70°C 5761.038M7 bar 130°C 5761.038N7 bar 200°C 5761.038P10 bar 70°C 5761.038T10 bar 130°C 5761.038V10 bar 200°C 5761.038W
Plain 5130.314Drilled for jacket 5130.334Relief valve see page 63
13 Dome nut, rotorcase cover 8 5340.04714 Retainer, seal 2 5560.03415 Screw, seal retainer 6 5990.030
(not for ATEX) NBR 5310.041FPM 5310.074
10 bar 70°C 5740.055D10 bar 130°C 5740.055E10 bar 200°C 5740.055F20 bar 70°C 5740.055K20 bar 130°C 5740.055L20 bar 200°C 5740.055M10 bar 70°C 5741.055D10 bar 130°C 5741.055E10 bar 200°C 5741.055F20 bar 70°C 5741.055K20 bar 130°C 5741.055L20 bar 200°C 5741.055M10 bar 70°C 5761.055D10 bar 130°C 5761.055E10 bar 200°C 5761.055F20 bar 70°C 5761.055K20 bar 130°C 5761.055L20 bar 200°C 5761.055M
Rotor, Trilobe, NBR covered S4-0055 5722.0557 bar 70°C 5740.079D7 bar 130°C 5740.079E7 bar 200°C 5740.079F15 bar 70°C 5740.079K15 bar 130°C 5740.079L15 bar 200°C 5740.079M
S4-0055-H10 S4-0055-V10
S4-0055-H20 S4-0055-V20
S4-0079-H10 S4-0079-V10
S4-0079-H15 S4-0079-V15
S4-0055-H10 S4-0055-V10
S4-0055-H20 S4-0055-V20
S4-0055-H10 S4-0055-V10
S4-0055-H20 S4-0055-V20
Rotor, Bilobe Stainless Steel
Rotor, Bilobe non-galling
Rotor, Trilobe Stainless Steel
11
12
17
7 Lip seal, drive end 1
8 Shim 1 set
2
1
'O' Ring, cover - plain
16 Lip seal, gland end
'O' Ring, cover - relief valve
Cover, rotorcase 1
2
Rotor, Trilobe Stainless Steel
11 SSP/S/SPARES/0909
S4 Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.079D7 bar 130°C 5741.079E7 bar 200°C 5741.079F15 bar 70°C 5741.079K15 bar 130°C 5741.079L15 bar 200°C 5741.079M7 bar 70°C 5761.079D7 bar 130°C 5761.079E7 bar 200°C 5761.079F15 bar 70°C 5761.079K15 bar 130°C 5761.079L15 bar 200°C 5761.079M
Plain 5130.315Drilled for jacket 5130.335Relief valve see page 63
13 Dome nut, rotorcase cover 8 5340.04714 Retainer, seal 2 5560.03615 Screw, seal retainer 6 5990.030
(not for ATEX) NBR 5310.043FPM 5310.076
10 bar 70°C 5740.116D10 bar 130°C 5740.116E10 bar 200°C 5740.116F20 bar 70°C 5740.116K20 bar 130°C 5740.116L20 bar 200°C 5740.116M10 bar 70°C 5741.116D10 bar 130°C 5741.116E10 bar 200°C 5741.116F20 bar 70°C 5741.116K20 bar 130°C 5741.116L20 bar 200°C 5741.116M10 bar 70°C 5761.116D10 bar 130°C 5761.116E10 bar 200°C 5761.116F20 bar 70°C 5761.116K20 bar 130°C 5761.116L20 bar 200°C 5761.116M
Rotor, Trilobe, NBR covered S5-0116 5722.1167 bar 70°C 5740.168D7 bar 130°C 5740.168E7 bar 200°C 5740.168F15 bar 70°C 5740.168K15 bar 130°C 5740.168L15 bar 200°C 5740.168M
Rotor, Trilobe Stainless Steel
S5-0168-H07
S5-0168-H15
S5-0116-H20
Rotor, Bilobe Stainless Steel
12 Cover, rotorcase
Rotor, Bilobe non-galling
S5-0116-H10
S5-0116-H20
1
17 2
16 Lip seal, gland end 2
Rotor, Trilobe Stainless Steel
S5-0116-H10
S5-0116-H20
S5-0116-H10
'O' Ring, cover - plain
7 Lip seal, drive end 1
8 Shim 1 set
11 1
'O' Ring, cover - relief valve
14 SSP/S/SPARES/0909
S5 Horizontally Ported Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.168D7 bar 130°C 5741.168E7 bar 200°C 5741.168F15 bar 70°C 5741.168K15 bar 130°C 5741.168L15 bar 200°C 5741.168M7 bar 70°C 5761.168D7 bar 130°C 5761.168E7 bar 200°C 5761.168F15 bar 70°C 5761.168K15 bar 130°C 5761.168L15 bar 200°C 5761.168M
Plain 5130.315Drilled for jacket 5130.335Relief valve see page 63
13 Dome nut, rotorcase cover 8 5340.04714 Retainer, seal 2 5560.03615 Screw, seal retainer 6 5990.030
(not for ATEX) NBR 5310.043FPM 5310.076
10 bar 70°C 5740.116D10 bar 130°C 5740.116E10 bar 200°C 5740.116F20 bar 70°C 5740.116K20 bar 130°C 5740.116L20 bar 200°C 5740.116M10 bar 70°C 5741.116D10 bar 130°C 5741.116E10 bar 200°C 5741.116F20 bar 70°C 5741.116K20 bar 130°C 5741.116L20 bar 200°C 5741.116M10 bar 70°C 5761.116D10 bar 130°C 5761.116E10 bar 200°C 5761.116F20 bar 70°C 5761.116K20 bar 130°C 5761.116L20 bar 200°C 5761.116M
Rotor, Trilobe, NBR covered S5-0116 5722.1167 bar 70°C 5740.168D7 bar 130°C 5740.168E7 bar 200°C 5740.168F15 bar 70°C 5740.168K15 bar 130°C 5740.168L15 bar 200°C 5740.168M
Rotor, Bilobe non-galling
S5-0116-V10
S5-0116-V20
Rotor, Trilobe Stainless Steel
S5-0168-V07
S5-0168-V15
Rotor, Trilobe Stainless Steel
S5-0116-V10
S5-0116-V20
Rotor, Bilobe Stainless Steel
S5-0116-V10
S5-0116-V20
12
7
8
Lip seal, drive end 1
Shim 1 set
1
17 2
'O' Ring, cover - plain
16 Lip seal, gland end
'O' Ring, cover - relief valve
Cover, rotorcase 1
2
11
17 SSP/S/SPARES/0909
S5 Vertically Ported Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.168D7 bar 130°C 5741.168E7 bar 200°C 5741.168F15 bar 70°C 5741.168K15 bar 130°C 5741.168L15 bar 200°C 5741.168M7 bar 70°C 5761.168D7 bar 130°C 5761.168E7 bar 200°C 5761.168F15 bar 70°C 5761.168K15 bar 130°C 5761.168L15 bar 200°C 5761.168M
Plain 5130.316For rectangular inlet 5130.346Drilled for jacket 5130.336Relief valve see page 63
13 Dome nut, rotorcase cover 8 5340.02214 Retainer, seal 2 5560.03715 Screw, seal retainer 6 5990.030
(not for ATEX) NBR 5310.044FPM 5310.077
10 bar 70°C 5740.260D10 bar 130°C 5740.260E10 bar 200°C 5740.260F20 bar 70°C 5740.260K20 bar 130°C 5740.260L20 bar 200°C 5740.260M10 bar 70°C 5741.260D10 bar 130°C 5741.260E10 bar 200°C 5741.260F20 bar 70°C 5741.260K20 bar 130°C 5741.260L20 bar 200°C 5741.260M10 bar 70°C 5761.260D10 bar 130°C 5761.260E10 bar 200°C 5761.260F20 bar 70°C 5761.260K20 bar 130°C 5761.260L20 bar 200°C 5761.260M7 bar 70°C 5740.353D7 bar 130°C 5740.353E7 bar 200°C 5740.353F15 bar 70°C 5740.353K15 bar 130°C 5740.353L15 bar 200°C 5740.353M
S6-0260-H10
S6-0260-H20
Cover, rotorcase 1
Rotor, Trilobe Stainless Steel
S6-0353-H07
S6-0353-H15
Rotor, Bilobe non-galling
S6-0260-H10
S6-0260-H20
17 2
16 Lip seal, gland end 2
12
Rotor, Trilobe Stainless Steel
Rotor, Bilobe Stainless Steel
S6-0260-H10
S6-0260-H20
1
1 set
'O' Ring, cover - plain
7
8
Lip seal, drive end
Shim
11 1
'O' Ring, cover - relief valve
20 SSP/S/SPARES/0909
S6 Horizontally Ported Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.353D7 bar 130°C 5741.353E7 bar 200°C 5741.353F15 bar 70°C 5741.353K15 bar 130°C 5741.353L15 bar 200°C 5741.353M7 bar 70°C 5761.353D7 bar 130°C 5761.353E7 bar 200°C 5761.353F15 bar 70°C 5761.353K15 bar 130°C 5761.353L15 bar 200°C 5761.353M
Plain 5130.316For rectangular inlet 5130.346Drilled for jacket 5130.336Relief valve see page 63
13 Dome nut, rotorcase cover 8 5340.02214 Retainer, seal 2 5560.03715 Screw, seal retainer 6 5990.030
(not for ATEX) NBR 5310.044FPM 5310.077
10 bar 70°C 5740.260D10 bar 130°C 5740.260E10 bar 200°C 5740.260F20 bar 70°C 5740.260K20 bar 130°C 5740.260L20 bar 200°C 5740.260M10 bar 70°C 5741.260D10 bar 130°C 5741.260E10 bar 200°C 5741.260F20 bar 70°C 5741.260K20 bar 130°C 5741.260L20 bar 200°C 5741.260M10 bar 70°C 5761.260D10 bar 130°C 5761.260E10 bar 200°C 5761.260F20 bar 70°C 5761.260K20 bar 130°C 5761.260L20 bar 200°C 5761.260M7 bar 70°C 5740.353D7 bar 130°C 5740.353E7 bar 200°C 5740.353F15 bar 70°C 5740.353K15 bar 130°C 5740.353L15 bar 200°C 5740.353M
S6-0260-V10
S6-0260-V20
Rotor, Trilobe Stainless Steel
S6-0353-V07
S6-0353-V15
Rotor, Bilobe Stainless Steel
S6-0260-V10
S6-0260-V20
1
17 2
2
12
16
Rotor, Bilobe non-galling
Lip seal, gland end
Cover, rotorcase
Rotor, Trilobe Stainless Steel
S6-0260-V10
1
'O' Ring, cover - plain
'O' Ring, cover - relief valve
S6-0260-V20
11
1
8 Shim 1 set
7 Lip seal, drive end
23 SSP/S/SPARES/0909
S6 Vertically Ported Pump (continued)Drg Description Qty Part No.No.
7 bar 70°C 5741.353D7 bar 130°C 5741.353E7 bar 200°C 5741.353F15 bar 70°C 5741.353K15 bar 130°C 5741.353L15 bar 200°C 5741.353M7 bar 70°C 5761.353D7 bar 130°C 5761.353E7 bar 200°C 5761.353F15 bar 70°C 5761.353K15 bar 130°C 5761.353L15 bar 200°C 5761.353M
Due to the high number of combinations of rotorcase body and port standard the below tables show how to construct the complete rotorcase part number.
Example:Rotorcase machined for R90 mechanical seal with 1" (25mm) BSP male connections forS1-0005 pump.Part number 9037.026S = 9 + 037 + 026 + S where 9 = constant037 = rotorcase body code026 = rotorcase port codeS = constant (Series S)
Example: (vertically ported flanged rotorcase S1-S5 ONLY)Rotorcase machined for R90 mechanical seal with 1" (25mm) ASA150RF connections for S1-0005 pump.Part no. 9037.018/324S = 9 + 037 + 018 + 324 + S where 9 = constant037 = rotorcase body code018 = rotorcase top port code324 = rotorcase bottom port code for bendS = constant (Series S)For bottom flanged bends and gaskets see page 33.
R90 = R90 and Packed Gland SealHYC = Hyclean SealHS = drilled for Heating SaddleRECT = Rectangular InletPort bore and code information is for internal use only
Note: Above are listed the most common seal ring / 'O' ring combinations - for other combinations see p.49.Note: For S6 seals where inboard and outboard seals are different, then there is an additional "P" in thepart number to distinguish between S6 seals and A7-0550 and G7-0550 seals
S6
Part No.'O' Ring (FPM) 75 2 1551.048Housing, BSPT 5265.329AHousing, NPT 5265.329BScrew - 4 5990.004
Stainless Steel / Carbon
Inboard Seal 'O'
Ring
Outboard Seal 'O'
Ring
Silicon Carbide / Silicon Carbide
Silicon Carbide / Silicon Carbide
Drg No.
79
Part No.
Stainless Steel / Inserted Carbon
Stainless Steel / Carbon
Tungsten Carbide / Tungsten Carbide
Tungsten Carbide / Tungsten Carbide
Tungsten Carbide / Tungsten Carbide
2
Description
Inboard SealRotary Seal /Stationary Seal Ring
Qty
Rotary Seal /Stationary Seal Ring
Stainless Steel / Carbon
Stainless Steel / Inserted Carbon
Stainless Steel / Carbon
Silicon Carbide / Silicon Carbide
50 SSP/S/SPARES/0909
R90 Double Mechanical Seals (Complete - Part Numbering)The table below shows how to create the complete seal part number.
Example: 7400.174V/144VDouble R90 seal with Tungsten Carbide vs. Tungsten Carbide faces inboard with FPM product wettedO' rings and Inserted Carbon vs. Stainless Steel outboard faces with FPM flush wetted 'O' rings forSeries S4 pump model.
7400. ** * * / ** * *
N = NBR N = NBRE = EPDM E = EPDMV = FPM V = FPMP = PTFE P = PTFE
78 Grub Screw 6 6010.013 6010.01398 Washer 4 R6400.061 R6400.06299 Wave Spring (see note 1) 4 R6300.031 R6300.032100 Drive Ring 2 R5620.041 R5620.042
Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.
Description Material Qty
S2 pump - Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98) . Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).
71 Stationary Seal Ring 'O' Ring 4
73 Rotary Seal Ring 'O' Ring 4
2
Note: S1 pump - Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99), washer (98), drive ring (100) and grub screw (78). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99) and washer (98).
78 Grub Screw 6 6010.013 6010.01598 Washer 4 R6400.063 R6400.06499 Wave Spring (see note 1) 4 R6300.033 R6300.034100 Drive Ring 2 R5620.043 R5620.044
Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.
Description Material Qty
71 Stationary Seal Ring 'O' Ring 4
72Stationary Seal Ring (inboard or outboard)
4
74ARotary Seal Assembly (inboard)
2
Note: Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).
Wave Spring (see note 1) 4 R6300.035 -Coil Spring 24 - R6300.036
100 Drive Ring 2 R5620.045 R5620.046Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.
74BRotary Seal Assembly (outboard)
2
Note: Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).
Description Material Qty
72Stationary Seal Ring (inboard or outboard)
4
99
71 Stationary Seal Ring 'O' Ring 4
73 Rotary Seal Ring 'O' Ring 4
74ARotary Seal Assembly (inboard)
2
54 SSP/S/SPARES/0909
R90 Double Mechanical Seal - Exploded View Drawing
55 SSP/S/SPARES/0909
Hyclean Single Mechanical Seals (Complete) - S1 and S2 Pump Models
2 seals per pump. It is recommended to replace both sets of seals when wear dictates seal replacement
All Series S pumps are fitted with 10 packing rings (i.e.5 per shaft) except S1, which has 8 packing rings (i.e. 4 per shaft). If a lantern ring is fitted, this replaces 1 packing ring on each shaft.
1 Shaft Sleeve 'O' Ring 2
Description Qty
2 Shaft Sleeve 2
4 Gland Packing 10
62 SSP/S/SPARES/0909
Packed Gland Seals - Pump Models S5 and S6
Drg S5 S6
No. Part No Part NoNBR 5380.076 5380.136EPDM 5380.198 5380.134FPM 5380.077 5380.158PTFE 5380.192 5380.165
All Series S pumps are fitted with 10 packing rings (i.e.5 per shaft) except S1, which has 8 packing rings (i.e. 4 per shaft). If a lantern ring is fitted, this replaces 1 packing ring on each shaft.
1 Shaft Sleeve 'O' Ring 2
Description Qty
7 Housing 2
4 Gland Packing 10
63 SSP/S/SPARES/0909
Packed Gland Seal - Exploded View Drawing
64 SSP/S/SPARES/0909
Pressure Relief Valve (Complete) - Series S Pump ModelsComplete assembly includes rotorcase cover.For elastomers required: N = NBR, E = EPDM, V = FPM and P = PTFE.
S1 S2 S3
Part No. Part No. Part No.4083.001N 4083.002N 4083.003N4083.001E 4083.002E 4083.003E4083.001V 4083.002V 4083.003V4083.001P 4083.002P 4083.003P
8 bar 70°C 5712.005GEP8 bar 130°C S1-0005 5712.005HEP8 bar 200°C5 bar 70°C 5712.008DEP5 bar 130°C S1-0008 5712.008EEP5 bar 200°C 5712.008FEP10 bar 70°C 5740.013MEP10 bar 130°C 5740.013NEP10 bar 200°C 5740.013PEP15 bar 70°C15 bar 130°C15 bar 200°C7 bar 70°C 5740.018MEP7 bar 130°C 5740.018NEP7 bar 200°C 5740.018PEP10 bar 70°C10 bar 130°C10 bar 200°C10 bar 70°C 5740.027MEP10 bar 130°C 5740.027NEP10 bar 200°C 5740.027PEP15 bar 70°C15 bar 130°C 5740.027VEP15 bar 200°C7 bar 70°C 5740.038MEP7 bar 130°C 5740.038NEP7 bar 200°C 5740.038PEP10 bar 70°C10 bar 130°C10 bar 200°C10 bar 70°C 5740.055DEP10 bar 130°C 5740.055EEP10 bar 200°C20 bar 70°C 5740.055KEP20 bar 130°C 5740.055LEP20 bar 200°C7 bar 70°C 5740.079DEP7 bar 130°C 5740.079EEP7 bar 200°C15 bar 70°C 5740.079KEP15 bar 130°C 5740.079LEP15 bar 200°C
12 Cover, rotorcase - EP 1
17 Rotor, Trilobe Stainless Steel - EP 2
S2-0013-H10 & V10
S2-0013-H15 & V15
S2-0018-H07 & V07
S2-0018-H10 & V10
S4-0079- H07 & V07
S4-0079- H15 & V15
S3-0027-H10 & V10
S3-0027-H15 & V15
S3-0038-H07 & V07
S3-0038-H10 & V10
S4-0055- H10 & V10
S4-0055- H20 & V20
72 SSP/S/SPARES/0909
Electropolishing (Rotors cont'd and Rotor Nuts)Drg Description Qty Part No.No.
10 bar 70°C 5740.116DEP10 bar 130°C 5740.116EEP10 bar 200°C20 bar 70°C 5740.116KEP20 bar 130°C 5740.116LEP20 bar 200°C7 bar 70°C 5740.168DEP7 bar 130°C 5740.168EEP7 bar 200°C15 bar 70°C15 bar 130°C15 bar 200°C10 bar 70°C 5740.260DEP10 bar 130°C 5740.260EEP10 bar 200°C20 bar 70°C20 bar 130°C20 bar 200°C7 bar 70°C 5740.353DEP7 bar 130°C 5740.353EEP7 bar 200°C15 bar 70°C15 bar 130°C15 bar 200°C
79Seal housing, double mechanical seal for thermocouple (R90 Double mechanical seal) Note: Normally 1 off is req'd as other seal housing will be as standard
1
101 Thermocouple clamp plate 1
72bStationary seal ring with thermocouple (R90 Single mechanical seal). Note: Only silicon carbide available and normally 1 off is req'd as other seal ring will be as standard silicon carbide
1
72cStationary seal ring with thermocouple (R90 Double mechanical seal) Note: Only silicon carbide available and normally 1 off is req'd as other seal ring will be as standard silicon carbide
1
50 Gland guard
2
S5 1
S6 1
47 Filler plug 5192.286S5-6
46 Sight glass 5480.010S5-6
75 SSP/S/SPARES/0909
Miscellaneous Items
S1-S6
Part No.1/8" BSPT 5470.0001/8" NPT 5470.0061/4" BSPT 5470.0011/4" NPT 5470.004
Grease filled gearboxes in gearcases drilled for oil.If Gearcase is drilled for Oil and supplied for Grease then the same fixings are required as for Oil, EXCEPTthat Unvented Filler Plug 31495.0052.1 is used instead of 31491.0052.1 and 5480.001
4
The following housings have 1/8" connectionsR90 Flush and Double sizes S1-S3Hyclean Flush sizes S1-S4Packed Gland sizes S1-S4The following housings have 1/4" connectionsR90 Flush and Double sizes S4-S6Hyclean Flush sizes S5-S6Packed Gland sizes S5-S6
QtyDescription
Plug, Seal Housing
76 SSP/S/SPARES/0909
Revision History
Issue Ref Date Description
- SRU range introduced and replaces SR/3A and NMOG pump ranges.(SR/3A SS and SD versions still available to special order only.)
CH5808 The gearboxes on sizes SRU1-4 revised to universal mounting with bolt-on feet for either horizontal or vertical porting.
CH5809 Gearboxes on sizes SRU5-6 remained as dedicated for either horizontal or vertical porting but standardised to one external shape.
CH5808CH5809 Grease lubrication withdrawn as a standard option.
CH5817CH5834
SRU6/260 introduced to replace SR6/246/3A and NMOG822 to provide increased bore size on 4" ports.
CH5804 Sanitary size port bores introduced throughout range (CH5804, CH5758, CH5812, CH5813, and CH5814).
CH5793Shim retainers standardised to one item per pump size that is suitable to fit both the SRU and for spares requirements on discontinued SR, SR/3A and NMOG ranges.
CH5795 SRU1-4 timing gears revised to hardened as standard.CH5816 New style gland guards introduced.
CH5825CH5826
Bilobe rotors revised to have the master spline at 45 deg which allows both rotors in the pump to be identical instead of 'handed'.
CH5839 Hyclean flushed lip seals standardised to fully enclosed FPM with stainless steel spring.
2001-02 TM 01/02/2001 New manual issue 1 ref SP70844-GB1
1.01 CH Pump drg item no 14A (gasket) deleted. The gaskets are no longer available and silicone sealant (item Z3717.0001) is used.
1.02 CH5883 05/03/2001 Pump drg item no 46A (sight glass washer) deleted. The sight glass 5480.001 has been changed to include an integral washer.
1.03 CH5884 06/03/2001 SRU1 and SRU2 Pump drg item no. 51/52 gland guard screws revised to 4 off part 6000.010 instead of 4 off 5990.045 and 4 off washers 6400.046.
1.04 CH5905 26/04/2001Pump drg item no 40 (screw) revised on pump sizes SRU2 and SRU3. SRU2 part number updated from part 5990.044 to part 5990.007.SRU3 part number updated from part part 5990.007 to part 5990.005.
1.05 Pump drg item no 1 (gearcase) and drg items 54 and 56 (feet) revised to indicate part and item numbers for painted Burgundy.
1.07 SRU1 Pump drg item no. 11 (PTFE) part number corrected from 1550.239 to part 1552.239.
1.08 SRU1 Pump drg item no. 18 (FPM) part number corrected from 5380.566 to part 5380.420.
1.10 SRU4 Pump drg item no. 11 (FPM) part number corrected from 5380.433 to part 1551.265.
1.11 SRU5 Pump drg item no. 11 (FPM) part number corrected from 5380.436 to part 1551.273.
1.12 SRU5 Pump drg item no. 8A corrected from part 6150.256 to part 6150.315 as per above CH5793.
1.15 SRU1 R90 flush housing gasket corrected to part number 5198.201 and quantity to 1 per pump as per CH5234 (1997).
1.16 SRU4 R90 flush housing studs, nuts and washers corrected to screws part number 5990.078 as per CH5151 (1996).
1.17 SRU5 R90 flush housing studs corrected to part number 6350.104.1.18 Details of Hyclean retaining clips and screws added.1.19 SRU1 Hyclean housing 'O' ring corrected to part number 5380.273.1.20 SRU2 Hyclean housing 'O' ring corrected to part number 1551.138.1.21 SRU5 Hyclean housing 'O' ring corrected to part number 5380.407.
SRU
INTR
OD
UC
TIO
N
Febr
uary
200
1
77 SSP/S/SPARES/0909
Revision History (continued)
Issue Ref Date Description
1.22 SRU6 Hyclean housing 'O' ring corrected to part number 5380.292.
1.23 Details of stainless steel shaft sleeves added to SRU1-4 packed gland arrangements.
1.24 SRU1 packed gland flush housings corrected to part numbers 5235.014AA and 5235.014BA.
1.25 SRU1 packed gland housing gasket corrected to part number 5198.201 and quantity to 1 per pump as per CH5234 (1997).
1.26 Packed gland housing stud nuts corrected as per CH5093 (1996).1.27 SRU4-6 gland followers corrected to split type as per CH4831 (1994).1.28 SRU2 Pump drg. Item no. 2 dowel, part number corrected to 5170.025.
1.29 SRU3 Packed gland stud corrected to part number 6350.144 as per CH5654 (1999).
Series S NOV2002
Series S range introduced with new nomenclature and replaces SRU for SSP sales channels.
2 0211 01/11/2002 NEW MANUAL SERIES S2.01 13/05/2003 Part numbers of S4 Cover/Spline Sealing kits on p.35 corrected.
3 0503 01/03/2005 Manual updated to include latest R90 and Hyclean seal drawings and parts list.
3.01 CH10707 01/03/2005
Hyclean drive and auxiliary shafts now only available in Duplex material. Hyclean stainless steel shaft part numbers removed (S2 - 6100.656 & 6110.656, S3 - 6100.657 & 6110.657, S4 - 6100.658 & 6110.658, S5 - 6100.659 & 6110.659, S6 - 6100.708 & 6110.708).
3.02 CH10672 01/03/2005 Note added to p.39, 40, 50, 51 and 52 relating to use of double wave springs.
3.03 30/01/2006 Rotorcase body part numbers table modified.
3.04 CH-10981 30/01/2006 NBR, EPDM and PTFE Spacer 'O' ring options removed, leaving only FPM available.
3.06 CH-10992 30/01/2006 EPDM USP Class VI 'O' rings and seals p.69 added.3.07 30/01/2006 Electropolished parts p.70-72 added.3.08 28/02/2006 ATEX parts added.3.09 CH-10702 28/02/2006 Feet gaskets removed S1-4. Exploded view drawings amended.
3.10 CH-10847 28/02/2006 S3 Vertically ported foot part number changed from 5225.403.00 to 5225.413.00
4 0603 01/03/2006 NEW ISSUE4.01 08-04-2008 Non-applicable4.02 08-04-2008 Bonded washer part number 31499.5916.1 added to ATEX parts.4.03 08-04-2008 Non-applicable
4.04 CH-11028 08-04-2008 Part number 6150.324 added to shim set for S6 pressure relief valve parts.
4.05 08-04-2008 Note referring to qty of packing rings amended on p.62 and p.63
4.06 08-04-2008 Part and item corrected to 5380.292 for S5-0116 'O' ring for rectangular-round adaptor.
4.07 07-07-2008 Part and item numbers added for SRU6 'O' ring for rectangular-round adaptor.
4.08 07-07-2008 For SRU2-6 Rotary Seal Assembly description corrected to show drive ring included in 74B and not 74A.
4.09 07-07-2008 Service Kits added to include Cover/Sealing Kits and R90/Hyclean Single Mechanical Seals.
78 SSP/S/SPARES/0909
Revision History (continued)
Issue Ref Date Description
4.10 CH-11233 23-09-2009
R90 single and double flushed seal housing gasket replaced by 'o' ring for S2-6. Part No.s 5198.100, 5198.101, 5198.102, 5198.103 and 5198.104 replaced by 1551.034, 1551.037, 1551.532, 1551.044 and 1551.048 respectively.
4.11 CH-11244 23-09-2009For rectangular/round adaptor on S2 pump the stud/nut fixing now replaced by cap screw fixing . Part No.s 6350.018 and 5330.007 therefore replaced by 5990.052
4.12 CH-11272 23/09/2009 S6 relief valve bush part number 5060.011 replaced by 5060.016