How to use this table: • Determine the solar insolation factor based on system install location. • In the appropriate insolation factor column, find a maximum flow rate and discharge pressure value that are both equal to or greater than the application requirement. • Confirm that the minimum flow rate of that plunger is equal to or less than the application requirement. • Please contact CheckPoint for assistance or to discuss a customized solution. www.cppumps.com PERFORMANCE DATA Series FXS Solar Injection System FXS Performance 2 Panel Data RevA
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
![Page 1: Series FXS Solar Injection System...1/8" Plunger Min Flow Rate: 0.34 [GPO] Max Pressure: 12,000 [PSIG] 3/16" Plunger Min Flow Rate: 0.78 Max Pressure: 7,500 [PSIG] 1/4" Plunger Min](https://reader034.cupdf.com/reader034/viewer/2022042418/5f3501e166994a531e4f54ad/html5/thumbnails/1.jpg)
How to use this table: • Determine the solar insolation factor based on system install location. • In the appropriate insolation factor column, find a maximum flow rate and discharge pressure value that are both equal to or greater than the application requirement. • Confirm that the minimum flow rate of that plunger is equal to or less than the application requirement. • Please contact CheckPoint for assistance or to discuss a customized solution.
www.cppumps.com
PERFORMANCE DATA
Series FXS Solar Injection System
FXS Performance 2 Panel Data RevA
Related Documents
