122 Prolink Engineering Manual · 02/2018 siegling prolink modular belts SERIES 8 | SPLIT SPROCKETS Straight running belt | Pitch 25.4 mm (1 in) Easy assembly without dismounting shaft | Deep tooth engagement for heavy loads D 0 A W spr LG (Light gray) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 “Temperature influence“. All imperial dimensions (inches) are rounded off. S8 SPR-SP | Split Sprockets Main dimensions Shaft bores (● = Round, ■ = Square) Sprocket size (Number of teeth) Z12 Z16 Z19 W spr mm 25 25 25 inch 0.98 0.98 0.98 D 0 mm 98 130 154 inch 3.86 5.13 6.08 A max mm 44 60 72 inch 1.73 2.36 2.83 A min mm 42 59 71 inch 1.67 2.31 2.79 40 mm ■ ●/■ ●/■ 60 mm ●/■ ●/■ 1.5 inch ●/■ ●/■ 2.5 inch ●/■ ●/■ Material: PA, Color: LG
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
122 Prolink Engineering Manual · 02/2018
siegling prolink modular beltsSerieS 8 | Split SprocketS
Straight running belt | Pitch 25.4 mm (1 in)
easy assembly without dismounting shaft | Deep tooth engagement for heavy loads
D0
A
Wspr
LG (Light gray)
All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 “Temperature influence“.All imperial dimensions (inches) are rounded off.
S8 Spr-Sp | Split Sprockets
Main dimensions
Shaft bores (● = round, ■ = Square)
Sprocket size (Number of teeth)
Z12 Z16 Z19
Wsprmm 25 25 25
inch 0.98 0.98 0.98
D0mm 98 130 154
inch 3.86 5.13 6.08
Amaxmm 44 60 72
inch 1.73 2.36 2.83
Aminmm 42 59 71
inch 1.67 2.31 2.79
40 mm ■ ●/■ ●/■
60 mm ●/■ ●/■
1.5 inch ●/■ ●/■
2.5 inch ●/■ ●/■
Material: PA, Color: LG
Related Documents
