18 12/4/19 Aquatrol • Safety Relief Valves Series 69 The Aquatrol Series 69 is an industry standard relief valve used for liquid relief and by-pass. Engineered and designed for heavy duty, industrial and commercial usages. A single piece bonnet to eliminate leakage while allowing for simple cleaning. Easy removable sealed hex-cap to adjust pressure. Valves are calibrated (set to pressure) based on a range of flow-rates (GPM) versus seat size and set pressure. Standard valve is set to pressure to achieve flow rate maximum and minimums within each set pressure range. See capacity chart for details. Wide Range: Series 69 is available with a wider adjustable range (as an option). Valves are set to the mid- level pressure (or as specified). Typical wide-range is 150 PSI increments. Note: Flow rates are not showing. SERIES 69 RELIEF VALVES SERIES 69 RELIEF VALVES Usages: Features: • Field adjustable by simple removal of the hex-cap • Metal to metal precision lapped seating • Back pressure tested • Ease of cleaning and maintenance with simple bonnet removal. • Stainless steel springs • Single piece - 100% leak free bonnet Options: • BSPT connections • Female inlet • Viton embedded o-ring at hex cap • Packed lift lever • Wide range WR adjustable (150 PSI increments) • Stainless steel body and disk • Low Lead Configurations (for a potable Water Relief Valve) • PTFE Seating • Tamper proof wire seal • O2 Cleaning Include liquid by-pass, regulation, continuous relief and over-protection. Used on pumping stations, tanks, hydraulics, fluid / piping lines, oil fields, gas lines and more where a Liquid or Water Relief Valve is needed. Series 51 - 55 Series 51 liquid valves are smaller with a maximum pressure of 750 P.S.I. Series 55 are small compact (liquid) water relief valves with a maximum pressure of 200 P.S.I.
4
Embed
SERIES 69 RELIEF VALVES - aquatrol.com20 Aquatrol • Safety Relief Valves SERIES 51 AND 55 GPM @ 25% OVER SET PRESSURE PSI 10 20 30 40 50 75 100 150 200 300 400 500 600 750 GPM 3.3
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
18
12/4/19
Aquatrol • Safety Relief Valves
Series 69
The Aquatrol Series 69 is an industry standard relief valve used for liquid relief and by-pass. Engineered and designed for heavy duty, industrial and commercial usages. A singlepiece bonnet to eliminate leakage while allowing for simple cleaning. Easy removable sealed hex-cap to adjust pressure.
Valves are calibrated (set to pressure) based on a range of flow-rates (GPM) versus seat size and set pressure. Standard valve is set to pressure to achieve flow rate maximum and minimums within each set pressure range. See capacity chart for details.
Wide Range:Series 69 is available with a wider adjustable range (as an option). Valves are set to the mid-level pressure (or as specified). Typical wide-range is 150 PSI increments. Note: Flow rates are not showing.
SERIES 69 RELIEF VALVESSERIES 69 RELIEF VALVES
Usages:
Features: • Field adjustable by simple removal of the hex-cap
• Metal to metal precision lapped seating
• Back pressure tested
• Ease of cleaning and maintenance with simple bonnet removal.
• Stainless steel springs
• Single piece - 100% leak free bonnet
Options: • BSPT connections
• Female inlet
• Viton embedded o-ring at hex cap
• Packed lift lever
• Wide range WR adjustable (150 PSI increments)
• Stainless steel body and disk
• Low Lead Configurations (for a potable Water Relief Valve)
• PTFE Seating
• Tamper proof wire seal
• O2 Cleaning
Include liquid by-pass, regulation, continuous relief and over-protection. Used on pumping stations, tanks, hydraulics, fluid / piping lines, oil fields, gas lines and more where a Liquid or Water Relief Valve is needed.
Series 51 - 55Series 51 liquid valves are smaller with a maximum pressure of 750 P.S.I.Series 55 are small compact (liquid) water relief valves with a maximum pressure of 200 P.S.I.
19Visit us at www.Aquatrol.com
SERIES 69Item Description Brass Option Stainless Option
1 Body B16/B283 316 Stainless2 Bonnet B584 B5843 Ball Stainless Stainless4 Disc B62 316 Stainless5 Nameplate Stainless Stainless6 Disc Nut B16 B167 Spring Support B16 B168 Spring 302/17-7 302/17-79 Spring Plate B16 B1610 Hood Seal PTFE PTFE11 Hood B16 B1612 Pressure Screw B16 B1613 Spring Post B16 B1614 Lock-nut B16 B16
SERIES 69 – 51 – 55
Series Size I.D. Inlet Outlet DNDimensions – In. (mm)