Series 40 MMF035D and MMV035D Axial Piston Motors Parts Manual
2 520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
© 2003, 2008 Sauer-Danfoss. All rights reserved.
Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material. Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already ordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in this material are properties of their respective owners.
Front cover illustrations: P100 606, P100 607, P100 608, P100 609
3520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualContents
Service parts identification ................................................................................................................. 4Nameplate ................................................................................................................................................ 4Date code .................................................................................................................................................. 5Service bulletins ..................................................................................................................................... 5Procedure to identify a part ............................................................................................................... 6
Order code, fixed displacement ........................................................................................................ 7Input shaft seal .................................................................................................................................... 8-9Input shaft ....................................................................................................................................... 10-11End cap ............................................................................................................................................. 12-19Cylinder block kit ........................................................................................................................... 20-21Housing ............................................................................................................................................ 22-23Common parts ............................................................................................................................... 24-25Special hardware ........................................................................................................................... 24-25Overhaul seal kit ...................................................................................................................................26
Order code, variable displacement ................................................................................................27Input shaft seal ............................................................................................................................... 28-29Input shaft ....................................................................................................................................... 28-29Swashplate/minimum displacement ..................................................................................... 28-29Control features ............................................................................................................................. 28-29Housing/end cap ........................................................................................................................... 30-31Common parts ............................................................................................................................... 32-33Special hardware ........................................................................................................................... 32-33Overhaul seal kit ...................................................................................................................................34
SB-1998-008 (shaft bearing change) .............................................................................................35SB-1998-092 (dowel pin change) ...................................................................................................36SB-1999-058 (valve plate change) ..................................................................................................37SB-2000-026 (trunnion seal change) .............................................................................................38SB-2002-021 (change from woodruff key to straight key on tapered shaft) ..................39SB-2003-018 (shaft seal) ....................................................................................................................40SB-2005-015 (loop flush return spring) ........................................................................................41SB-2007-015 (shaft seal) ....................................................................................................................42
GeneraL InformatIon
fIxed dIspLacement
varIabLe dIspLacement
servIce buLLetIn
4 520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
servIce partsIndentIfIcatIon
Use this information and procedure to identify the module group, item number, manufacture date, part number, and part name of the parts included in the Series 40, M35 fixed and variable displacement motors. Use the parts listed when performing minor repairs, major repairs, or conversions on the Series 40: M35 motors.
namepLate Each unit has a nameplate affixed to its housing. The nameplate includes this information:
model code The Sauer-Danfoss model code defines the specific unit. Use it when ordering parts to service this product.
model number The manufacturing factory uses Sauer-Danfoss’ model number. On repeat orders, order a complete unit by the model number.
serial number The Sauer-Danfoss serial number identifies the manufacture date and unit sequence in the build. The serial number also identifies the unit’s warranty time period.
The letter code indicates the location of original manufacture (assembly). K indicates the unit was originally assembled in Lawrence, Kansas, USA.
The first number (2 digits) indicates the year of manufacture. (01 indicates the unit was manufactured in 2001).
The second number (2 digits) indicates the calendar week of manufacture.
The third number (5 digits) is a sequential number that identifies a specific unit.
Model Code Typ
Model No. Ident-Nr
MADE IN U.S.A.Serial No. Fabr-Nr
4353026K - 01 - 34 - 12345
MMF035D A F AA B NNN
General information
5520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualGeneral information
date code The date code is the year and week of manufacture. The same item number may list more than one part number. This indicates that there is more than one configuration for that item number. You will see that there are different date codes for different part numbers. Find the date code of your unit on the nameplate to determine the service part number you need to order.
EXAMPLE: The service part desired is Item D02.
N D02 02-48 5000664 Square key (SB-2002-021) 1
D02 96-32 02-47 532432 (9003310-2514) Woodruff key 1
order date date Qty. per code Item begin end part number part name model/kit
All units using this order code with a date code of 96-32, up to and including 02-47, must use part number 9003310-2514. All units with a date code of 02-48, and newer, must use part number 5000664.
servIce buLLetIns A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the part name of the part you desire. Read that Service Bulletin before ordering that part. The information contained in these Service Bulletins, as of the print date, are at the end of this manual. Service Bulletins contain more detailed information such as interchangeability, what additional parts are involved, and so forth. We suggest that you add additional Service Bulletins to this manual as you recieve them.
6 520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualGeneral information
procedure to IdentIfy a part
General The modular design of Series 40 units results in a simplified service parts list and part number identification procedure. The same item numbers are used for same part names on all units within a product type. (Example: The shaft lip seal, Item C01, has the same item number on all motors.)
A part number that has another number following in parentheses makes this a world-wide manual. The first number is sold in Germany. The number, in parentheses, is sold in the United States. (Example: 701912 (9008000-0121); customers order 9008000-0121 if ordering the part in the United States.)
example of a part identification The nameplate on a Series 40 motor has an Order Code of MMF035D A F A A B NNN. Do this to determine the part number of the drive shaft used on this pump:
1) Referring to the input shaft module in the Order Code (see page 7), the output shaft option for this motor is identified by the code f. (MMF035D A f A A B NNN)
2) Referring to the Service Parts List, find the shaft group.3) Find the order code that relates to this unit, which is f.4) The shaft is Item D01.5) The part number 4350427.
7520L0602 • Rev AA • January 2008
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualOrder code
P100 647E
M M
Product
Frame size
Type
Seal group
Output shaft
End cap
Housing
Cylinder block
F 0 3 5 D A F M A B N N N
Special hardware
8 520L0602 • Rev AA • January 20088
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 602E
c01
C02
c03
C05c04
c01
C02
c03
c09C06
C11 c10
C05c04
C05
c13
c09C06
C11 c10
C12
(a) (b)
(d)
(e)
9520L0602 • Rev AA • January 2008 9
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
Input shaft seaL order date date Qty. per code Item begin end part number part name model/kit A C01 96-24 5000689 Lip seal (SB-2007-015) 1
C02 96-24 4350455 Support washer 1
C03 96-24 9006200-0281 Retaining ring 1
B C01 96-24 5000689 Lip seal (SB-2007-015) 1
C02 96-24 4350455 Support washer 1
C03 96-24 9006200-0281 Retaining ring 1
C04 96-24 5000465 Lip seal 1
C05 96-24 9006200-0156 Retaining ring 1
D C04 00-32 5000465 Lip seal 1
C05 00-32 9006200-0156 Retaining ring 1
C06 00-32 4350277 Seal carrier 1
C09 00-32 9008000-0131 Lip seal 1
C10 00-32 9004301-2320 O-ring 1
C11 00-32 913954 (9007315-0604) Screw 3
E C05 00-31 9006200-0156 Retaining ring 1
C06 00-31 4350277 Seal carrier 1
C09 00-31 9008000-0131 Lip seal 1
C10 00-31 9004301-2320 O-ring 1
C11 00-31 913954 (9007315-0604) Screw 3
C12 00-31 4350096 End cap plug 1
C13 00-31 9004100-0280 O-ring 1
Fixed displacement motor
10 520L0602 • Rev AA • January 200810
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 603E
d01
d01
d01d01
d02
d02
d01
d05
d01
d04
d05
d04
d05d04
d05
d04
d05d05
(a and L)(1)
(n)(c and f)
(x)(6 and s)
11520L0602 • Rev AA • January 2008 11
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
Input shaft order date date Qty. per code Item begin end part number part name model/kit 1 D01 00-31 4350279 Shaft, 23-tooth spline/no auxiliary 1
D05 00-31 9006325-0118 Retaining ring 1
6 D01 04-04 4350843 Shaft, straight keyed, 1.125 dia. 1
D02 04-04 9003261-3116 Key 1
D04 04-04 9006300-0137 Retaining ring 1
D05 04-04 9006300-0137 Retaining ring 1
A D01 95-42 4350428 Shaft, 13-tooth spline/no auxiliary 1
D04 95-42 9006300-0137 Retaining ring 1
D05 95-42 9006300-0137 Retaining ring 1
C D01 95-42 4350430 Shaft, 13-tooth spline/13-tooth auxiliary 1
D04 95-42 9006300-0137 Retaining ring 1
D05 95-42 9006300-0137 Retaining ring 1
F D01 95-42 4350427 Shaft, 15-tooth spline/no auxiliary 1
D04 95-42 9006300-0137 Retaining ring 1
D05 95-42 9006300-0137 Retaining ring 1
L D01 96-27 4350653 Shaft, 13-tooth spline with M8 tapped hole 1
D04 96-27 9006300-0137 Retaining ring 1
D05 96-27 9006300-0137 Retaining ring 1
N D01 96-27 4350805 Shaft, tapered (SB-2002-021) 1
D02 96-27 5000664 Square key (SB-2002-021) 1
D02 96-27 02-47 9003310-2514 Woodruff key 1
D04 96-27 9006300-0137 Retaining ring 1
D05 96-27 9006300-0137 Retaining ring 1
S D01 95-42 4350429 Shaft, straight keyed, .875 dia. 1
D02 95-42 9003261-2524 Key 1
D04 95-42 9006300-0137 Retaining ring 1
D05 95-42 9006300-0137 Retaining ring 1
X D01 00-32 4350319 Shaft, 23-tooth spline/20-tooth auxiliary 1
D05 00-32 9006325-0118 Retaining ring 1
Fixed displacement motor
12 520L0602 • Rev AA • January 200812
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 604E
e26aE29
E27
E30
E03
E33
E15
E09
E10E07
E06
e06a
E26
E01
E11
E17
e11a
E16
e17ae33a
E32
e32a E08
e08a
e04
E03
E01
E05
e05a
e04
E31
E03 E01
B55
b54a
b55a
B54
e04
E37
e34a E34
E01
e04
E03
Fixed displacement motor
(1) (3)
(4) (7)
13520L0602 • Rev AA • January 2008 13
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
end cap order date date Qty. per code Item begin end part number part name model/kit 1 E01 96-47 4350656 End cap, axial ports w/loop flushing 1
E03 96-47 9007210-1015 Screw 4
E04 96-47 9001465-0015 Needle bearing 1
E06 96-47 4800365 Plug assembly 1
E06A 96-47 085043 (9004201-3700) O-ring 1
E07 96-47 4800887 Spring (SB-2005-015) 1
E08 96-47 664524 (9005110-9000) Plug assembly 1
E08A 96-47 001156 (9004201-7500) O-ring 1
E09 96-47 512257 Spring guide 1
E10 96-47 8800550 Spool 1
E11 96-47 4800280 Plug assembly 1
E11A 96-47 015818 (9004201-3100) O-ring 1
E15 96-47 768853 Spring 1
E16 96-47 4800396 Poppet 1
E17 96-47 001511 (9005100-4400) Plug assembly 1
E17A 96-47 001123 (9004201-2500) O-ring 1
E26 96-47 4800365 Plug assembly 1
E26A 96-47 085043 (9004201-3700) O-ring 1
E27 96-47 4800887 Spring (SB-2005-015) 1
E29 96-47 512257 Spring guide 1
E30 96-47 8800565 Lifting bracket 1
E32 96-47 664524 (9005110-9000) Plug assembly 1
E32A 96-47 001156 (9004201-7500) O-ring 1
E33 96-47 001511 (9005100-4400) Plug assembly 1
E33A 96-47 001123 (9004201-2500) O-ring 1
3 E01 98-49 4350418 End cap, twin ports 1
E03 98-49 9007210-1015 Screw 4
E04 98-49 9001465-0015 Needle bearing 1
E05 98-49 315325 (9005110-8700) Plug assembly 1
E05A 98-49 001149 (9004201-6200) O-ring 1
E31 98-49 8800565 Lifting bracket 1
4 E01 99-07 4350278 End cap, radial ports 1
E03 99-07 9007210-1015 Screw 4
E04 99-07 9001465-0015 Needle bearing 1
E34 99-07 315325 (9005110-8700) Plug assembly 1
E34A 99-07 001149 (9004201-6200) O-ring 1
E37 99-07 8800565 Lifting bracket 1
7 B54 99-07 315325 (9005100-8700) Plug assembly 1
B54A 99-07 001149 (9004201-6200) O-ring 1
B55 99-07 315325 (9005100-8700) Plug assembly 1
B55A 99-07 001149 (9004201-6200) O-ring 1
E01 99-07 4350760 End cap, twin ports, auxiliary drive 1
E03 99-07 9007510-3734 Screw 4
E04 99-07 9001465-0015 Needle bearing 1
Fixed displacement motor
14 520L0602 • Rev AA • January 200814
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
E01
E30
E03
E05
e05a
e04
E03
E01
E05
e05a
e04
E30
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 605E
E37
e34a E34
E01
e04
E03E36
e36a
E30
E03e04
E01
e04E01
E30
E03
E01
E35
e35a
E30
E03e04
E32
e32a E08
e08a
E32
e32a E08
e08a
(a)
(b)
(c)
(e)
(f)
(G)
15520L0602 • Rev AA • January 2008 15
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
end cap order date date Qty. per code Item begin end part number part name model/kit A E01 95-48 4350278 End cap, radial ports 1
E03 95-48 9007210-1015 Screw 4
E04 95-48 9001465-0015 Needle bearing 1
E30 95-48 8800565 Lifting bracket 1
E34 95-48 315325 (9005110-8700) Plug assembly 1
E34A 95-48 001149 (9004201-6200) O-ring 1
B E01 95-48 4350165 End cap, axial ports 1
E03 95-48 307686 (9007210-1017) Screw 4
E04 95-48 9001465-0015 Needle bearing 1
E30 95-48 8800565 Lifting bracket 1
E36 95-48 315325 (9005110-8700) Plug assembly 1
E36A 95-48 001149 (9004201-6200) O-ring 1
C E01 95-48 4350288 End cap, radial ports, thru shaft 1
E03 95-48 9007210-1015 Screw 4
E04 95-48 9001465-0015 Needle bearing 1
E30 95-48 8800565 Lifting bracket 1
E34 95-48 315325 (9005110-8700) Plug assembly 1
E34A 95-48 001149 (9004201-6200) O-ring 1
E E01 95-42 4350409 End cap, radial ports 1
E03 95-42 9007210-1015 Screw 4
E04 95-42 9001465-0015 Needle bearing 1
E05 95-42 315325 (9005110-8700) Plug assembly 1
E05A 95-42 001149 (9004201-6200) O-ring 1
E08 95-42 664524 (9005110-9000) Plug assembly 1
E08A 95-42 001156 (9004201-7500) O-ring 1
E30 95-42 8800565 Lifting bracket 1
E32 95-42 664524 (9005110-9000) Plug assembly 1
E32A 95-42 001156 (9004201-7500) O-ring 1
F E01 95-42 4350408 End cap, radial ports 1
E03 95-42 9007210-1015 Screw 4
E04 95-42 9001465-0015 Needle bearing 1
E08 95-42 664524 (9005110-9000) Plug assembly 1
E08A 95-42 001156 (9004201-7500) O-ring 1
E30 95-42 8800565 Lifting bracket 1
E32 95-42 664524 (9005110-9000) Plug assembly 1
E32A 95-42 001156 (9004201-7500) O-ring 1
E35 95-42 315325 (9005110-8700) Plug assembly 1
E35A 95-42 001149 (9004201-6200) O-ring 1
G E01 95-42 4350418 End cap, twin ports 1
E03 95-42 9007210-1015 Screw 4
E04 95-42 9001465-0015 Needle bearing 1
E05 95-42 315325 (9005110-8700) Plug assembly 1
E05A 95-42 001149 (9004201-6200) O-ring 1
E30 95-42 8800565 Lifting bracket 1
Fixed displacement motor
16 520L0602 • Rev AA • January 200816
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
e26aE29
E27
E33
E15
E09e10
E07E06
e06a
E26
E01
E11
E17
e11a
E16
e17a
e33a
e04
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 606E
E30
E03
(h and m)
17520L0602 • Rev AA • January 2008 17
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
end cap order date date Qty. per code Item begin end part number part name model/kit H E01 96-14 4350353 End cap, twin ports w/loop flushing 1
E03 96-14 9007210-1015 Screw 4
E04 96-14 9001465-0015 Needle bearing 1
E06 96-14 4800365 Plug assembly 1
E06A 96-14 085043 (9004201-3700) O-ring 1
E07 96-14 4800887 Spring (SB-2005-015) 1
E09 96-14 512257 Spring guide 1
E10 96-14 8800550 Spool 1
E11 96-14 4800280 Plug assembly 1
E11A 96-14 015818 (9004201-3100) O-ring 1
E15 96-14 768853 Spring 1
E16 96-14 4800397 Poppet 1
E17 96-14 001511 (9005100-4400) Plug assembly 1
E17A 96-14 001123 (9004201-2500) O-ring 1
E26 96-14 4800365 Plug assembly 1
E26A 96-14 085043 (9004201-3700) O-ring 1
E27 96-14 4800887 Spring (SB-2005-015) 1
E29 96-14 512257 Spring guide 1
E30 96-14 8800565 Lifting bracket 1
E33 96-14 001511 (9005100-4400) Plug assembly 1
E33A 96-14 001123 (9004201-2500) O-ring 1
M E01 95-42 4350353 End cap, twin ports w/loop flushing 1
E03 95-42 9007210-1015 Screw 4
E04 95-42 9001465-0015 Needle bearing 1
E06 95-42 4800365 Plug assembly 1
E06A 95-42 085043 (9004201-3700) O-ring 1
E07 95-42 4800887 Spring (SB-2005-015) 1
E09 95-42 512257 Spring guide 1
E10 95-42 8800550 Spool 1
E11 95-42 4800280 plug assembly 1
E11A 95-42 015818 (9004201-3100) O-ring 1
E15 95-42 768853 Spring 1
E16 95-42 4800396 Poppet 1
E17 95-42 001511 (9005100-4400) Plug assembly 1
E17A 95-42 001123 (9004201-2500) O-ring 1
E26 95-42 4800365 Plug assembly 1
E26A 95-42 085043 (9004201-3700) O-ring 1
E27 95-42 4800887 Spring (SB-2005-015) 1
E29 95-42 512257 Spring guide 1
E30 95-42 8800565 Lifting bracket 1
E33 95-42 001511 (9005100-4400) Plug assembly 1
E33A 95-42 001123 (9004201-2500) O-ring 1
Fixed displacement motor
18 520L0602 • Rev AA • January 200818
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
e04e26aE29
E27
E33
E15
E09e10
E07
E06
e06a
E26
E01
E11
E17
e11a
E16
e17a
e33a
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 607E
e04
E01
E05
e05aE30
E03
E32
e32a E08
e08a
E30
E03
(y)
(u)
19520L0602 • Rev AA • January 2008 19
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
end cap order date date Qty. per code Item begin end part number part name model/kit U E01 95-42 4350407 End cap, axial ports 1
E03 95-42 9007210-1015 Screw 4
E04 95-42 9001465-0015 Needle bearing 1
E05 95-42 315325 (9005110-8700) Plug assembly 1
E05A 95-42 001149 (9004201-6200) O-ring 1
E08 95-42 664524 (9005110-9000) Plug assembly 1
E08A 95-42 001156 (9004201-7500) O-ring 1
E30 95-42 8800565 Lifting bracket 1
E32 95-42 664524 (9005110-9000) Plug assembly 1
E32A 95-42 001156 (9004201-7500) O-ring 1
Y E01 96-14 4350353 End cap, twin ports w/loop flushing 1
E03 96-14 9007210-1015 Screw 4
E04 96-14 9001465-0015 Needle bearing 1
E06 96-14 4800365 Plug assembly 1
E06A 96-14 085043 (9004201-3700) O-ring 1
E07 96-14 4800887 Spring (SB-2005-015) 1
E09 96-14 512257 Spring guide 1
E10 96-14 8800550 Spool 1
E11 96-14 4800280 Plug assembly 1
E11A 96-14 015818 (9004201-3100) O-ring 1
E15 96-14 768853 Spring 1
E16 96-14 4800389 Poppet 1
E17 96-14 001511 (9005100-4400) Plug assembly 1
E17A 96-14 001123 (9004201-2500) O-ring 1
E26 96-14 4800365 Plug assembly 1
E26A 96-14 085043 (9004201-3700) O-ring 1
E27 96-14 4800887 Spring (SB-2005-015) 1
E29 96-14 512257 Spring guide 1
E30 96-14 8800565 Lifting bracket 1
E33 96-14 001511 (9005100-4400) Plug assembly 1
E33A 96-14 001123 (9004201-2500) O-ring 1
Fixed displacement motor
20 520L0602 • Rev AA • January 200820
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
B28B27
B26
B25
B30
b29B54
b31B36
b32
f01
B28B27
B26
B25
B30
b29B54
b31B36
b32
f01
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 510E
B24
(a)
(c and d)
21520L0602 • Rev AA • January 2008 21
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
cyLInder bLocK KIt order date date Qty. per code Item begin end part number part name model/kit A F01 95-42 4350291 Cylinder block kit 1
B24 95-42 4350628 Cylinder block 1
B25 96.26 4350012 Washer 1
B26 96.26 4350172 Spring 1
B27 95-42 9009625-0105 Washer 1
B28 95-42 9006250-0162 Retaining ring 1
B29 95-42 9004875-0109 Holddown pin 4
B30 95-42 4350048 Holddown pin retainer 1
B31 95-42 4350186 Slipper retainer guide 1
B32 95-42 4350253 Piston assembly 9
B36 95-42 4350185 Slipper retainer 1
B54 95-42 4350187 Thrust washer 1
C F01 96-22 4350422 Cylinder block kit, w/magnetic speed ring 1
B25 96.26 4350012 Washer 1
B26 96.26 4350172 Spring 1
B27 96-22 9009625-0105 Washer 1
B28 96-22 9006250-0162 Retaining ring 1
B29 96-22 9004875-0109 Holddown pin 4
B30 96-22 4350048 Holddown pin retainer 1
B31 96-22 4350186 Slipper retainer guide 1
B32 96-22 4350253 Piston assembly 9
B36 96-22 4350185 Slipper retainer 1
B54 96-22 4350187 Thrust washer 1
D F01 00-24 4350773 Cylinder block kit, w/pulse speed ring 1
B25 96.26 4350012 Washer 1
B26 96.26 4350172 Spring 1
B27 00-24 9009625-0105 Washer 1
B28 00-24 9006250-0162 Retaining ring 1
B29 00-24 9004875-0109 Holddown pin 4
B30 00-24 4350048 Holddown pin retainer 1
B31 00-24 4350186 Slipper retainer guide 1
B32 00-24 4350253 Piston assembly 9
B36 00-24 4350185 Slipper retainer 1
B54 00-24 4350187 Thrust washer 1
Fixed displacement motor
22 520L0602 • Rev AA • January 200822
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
G01
G02G02a
G03
G02 G02a
G03a
G01
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 608E
(b) (d, f, G, K, n, p, s, t, and u)
23520L0602 • Rev AA • January 2008 23
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
housInG order date date Qty. per code Item begin end part number part name model/kit B G01 95-42 4350351 Fixed motor housing 1
D G01 95-42 4350420 Fixed motor housing w/speed sensor port 1
G02 95-42 4800432 Adapter assembly 1
G02A 95-42 001149 (9004201-6200) O-ring 1
G03 95-42 KPPG13408 Speed sensor 1
G03A 95-42 085043 (9004201-3700) O-ring 1
F G01 99-17 4350420 Fixed motor housing w/speed sensor port 1
G02 99-17 4800432 Adapter assembly 1
G02A 99-17 001149 (9004201-6200) O-ring 1
G03 99-17 KPPG156 Speed sensor 1
G03A 99-17 085043 (9004201-3700) O-ring 1
G G01 98-28 4350420 Fixed motor housing w/speed sensor port 1
G02 98-28 9005110-8700 Plug assembly 1
G02A 98-28 001149 (9004201-6200) O-ring 1
K G01 99-08 4350420 Fixed motor housing w/speed sensor port 1
G02 99-08 4800432 Adapter assembly 1
G02A 99-08 001149 (9004201-6200) O-ring 1
G03 99-08 KPPG16511 Speed sensor 1
G03A 99-08 085043 (9004201-3700) O-ring 1
N G01 07-30 4350420 Fixed motor housing w/speed sensor port 1
G02 07-30 4800432 Adapter assembly 1
G02A 07-30 001149 (9004201-6200) O-ring 1
G03 07-30 KPPG16008 Speed sensor 1
G03A 07-30 085043 (9004201-3700) O-ring 1
P G01 01-09 4350420 Fixed motor housing w/speed sensor port 1
G02 01-09 4800432 Adapter assembly 1
G02A 01-09 001149 (9004201-6200) O-ring 1
G03 01-09 KPPG16408 Speed sensor 1
G03A 01-09 085043 (9004201-3700) O-ring 1
S G01 02-40 4350797 Fixed motor housing w/speed sensor port 1
G02 02-40 9005110-8700 Plug assembly 1
G02A 02-40 001149 (9004201-6200) O-ring 1
T G01 07-30 4350420 Fixed motor housing w/speed sensor port 1
G02 07-30 4800432 Adapter assembly 1
G02A 07-30 001149 (9004201-6200) O-ring 1
G03 07-30 KPPG16708 Speed sensor 1
G03A 07-30 085043 (9004201-3700) O-ring 1
U G01 04-04 4350842 Fixed motor housing, 33/41cc 1
G02 04-04 9005110-8700 Plug assembly 1
G02A 04-04 001149 (9004201-6200) O-ring 1
Fixed displacement motor
24 520L0602 • Rev AA • January 200824
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
b37
t01
b21
T02
B51
B40
B40
b51a
t04
t03
B45
b45a
Enlarged bold type itemnumbers are recomended
parts to be stocked for servicing
E100 512E
25520L0602 • Rev AA • January 2008 25
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
common parts order date date Qty. per code Item begin end part number part name model/kit B21 95-42 4350148 Thrust plate 1
B37 95-42 4350089 End cap gasket 1
B40 95-42 9004875-0100 Spring pin 2
B45 06-10 315325 (9005110-8700) Plug assembly 1
B45A 06-10 001149 (9004201-6200) O-ring 1
B51 06-10 315325 (9005110-8700) Plug assembly 1
B51A 06-10 001149 (9004201-6200) O-ring 1
T01 95-42 4350754 Motor valve plate (SB-1999-058) 1
T02 95-42 9004700-1910 Slotted pin 1
specIaL hardware NBJ T03 06-10 9006200-0281 Retaining ring 1
T04 06-10 373282 (9001315-0011) Ball bearing 1
NNB T03 06-10 9006200-0281 Retaining ring 1
T04 06-10 357616 Roller bearing (SB-1998-008) 1
NNN T03 95-42 9006200-0281 Retaining ring 1
T04 95-42 373282 (9001315-0011) Ball bearing 1
NNO T03 06-10 9006200-0281 Retaining ring 1
T04 06-10 357616 Roller bearing (SB-1998-008) 1
NNR T03 95-42 9006200-0281 Retaining ring 1
T04 95-42 357616 Roller bearing (SB-1998-008) 1
NNV T03 96-44 9006200-0281 Retaining ring 1
T04 96-44 357616 Roller bearing (SB-1998-008) 1
NNY T03 06-10 9006200-0281 Retaining ring 1
T04 06-10 357616 Roller bearing (SB-1998-008) 1
NYJ T03 06-16 9006200-0281 Retaining ring 1
T04 06-16 373282 (9001315-0011) Roller bearing 1
Fixed displacement motor
26 520L0602 • Rev AA • January 200826
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualFixed displacement motor
overhauL seaL KIt order date date Qty. per code Item begin end part number part name model/kit 4510147 Overhaul seal kit, MMF035/44D 1
B37 95-42 4350089 End cap gasket 1
B45A 95-42 001149 (9004201-6200) O-ring, .755 x .097, nitrile, 90D 1
B51A 95-42 001149 (9004201-6200) O-ring, .755 x .097, nitrile, 90D 1
C01 95-42 5000689 Lip seal (SB-2007-015) 1
C04 95-42 5000465 Lip seal 1
C09 95-42 506515 (9008000-0131) Lip seal 1
E05A 95-42 001149 (9004201-6200) O-ring, .755 x .097, nitrile, 90D 1
E06A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 1
E08A 95-42 001156 (9004201-7500) O-ring, .9.24 x .116, nitrile, 90D 1
E11A 95-42 015818 (9004201-3100) O-ring, .414 x .072, nitrile, 90D 1
E17A 95-42 001123 (9004201-2500) O-ring, .351 x .072, nitrile, 90D 1
E26A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 1
E32A 95-42 001156 (9004201-7500) O-ring, .9.24 x .116, nitrile, 90D 1
E33A 95-42 001123 (9004201-2500) O-ring, .351 x .072, nitrile, 90D 1
G02A 95-42 001149 (9004201-6200) O-ring, .755 x .097, nitrile, 90D 1
G03A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 1
27520L0602 • Rev AA • January 2008 27
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualVariable displacement motor
P100 648E
M M
Product
Frame size
Type
Seal group
Output shaft
Minimum displacement
Housing/end cap
Control features
V 0 3 5 D A A D L R N N N
Special hardware
28 520L0602 • Rev AA • January 200828
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualVariable displacement motor
Swashplate showncontrolled on right.
c01
C03
C02
d05
d04
d01
E02
C05
e04e03
c06C07
E01
C05c04
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 610E
29520L0602 • Rev AA • January 2008 29
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
Input shaft seaL order date date Qty. per code Item begin end part number part name model/kit A C01 95-42 5000689 Lip seal (SB-2003-018) 1
C02 95-42 4350455 Support washer 1
C03 95-42 9006200-0281 Retaining ring 1
C05 95-42 9006200-0156 Retaining ring 1
C06 95-42 9004100-0280 O-ring 1
C07 95-42 4350096 End cap plug 1
B C01 95-42 5000689 Lip seal (SB-2003-018) 1
C02 95-42 4350455 Support washer 1
C03 95-42 9006200-0281 Retaining ring 1
C04 95-42 5000465 Lip seal 1
C05 95-42 9006200-0156 Retaining ring 1
Input shaft A D01 95-42 4350393 Shaft, 13-tooth spline 1
D04 95-42 9006300-0137 Retaining ring 1
D05 95-42 9006300-0137 Retaining ring 1
swashpLate/mInImum dIspLacement D E01 95-42 4440019 Swashplate
E02 95-42 4350092 Swashplate stop, set at 6° 1
E03 95-42 076042 (9003509-0012) Seal nut, M12 1
E04 95-42 750679 Plastic cap 1
J E01 96-02 4440019 Swashplate
E02 96-02 4350092 Swashplate stop, set at 13° 1
E03 96-02 076042 (9003509-0012) Seal nut, M12 1
E04 96-02 750679 Plastic cap 1
V E01 98-31 4350383 Swashplate 1
E02 95-42 4350092 Swashplate stop, set at 6° 1
E03 95-42 076042 (9003509-0012) Seal nut, M12 1
E04 95-42 750679 Plastic cap 1
controL features L Swashplate control shaft on left side
R Swashplate control shaft on right side
Variable displacement motor
30 520L0602 • Rev AA • January 200830
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualVariable displacement motor
G01
G06
G04G05G05a
G27G27a
G07
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 611E
31520L0602 • Rev AA • January 2008 31
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
housInG/end cap order date date Qty. per code Item begin end part number part name model/kit R G01 95-42 4350350 Variable motor housing 1
G04 95-42 4350404 End cap 1
G05 95-42 046151 (9005100-5600) Plug assembly 1
G05A 95-42 085043 (9004201-3700) O-ring 1
G06 95-42 9007314-1012 Screw 4
G07 95-42 9001465-0015 Needle bearing 1
G27 95-42 046151 (9005100-5600) Plug assembly 1
G27A 95-42 085043 (9004201-3700) O-ring 1
W G01 95-42 4350350 Variable motor housing 1
G04 95-42 4350404 End cap 1
G05 95-42 046151 (9005100-5600) Plug assembly 1
G05A 95-42 085043 (9004201-3700) O-ring 1
G06 95-42 9007314-1012 Screw 4
G07 95-42 9001465-0015 Needle bearing 1
G27 95-42 046151 (9005100-5600) Plug assembly 1
G27A 95-42 085043 (9004201-3700) O-ring 1
Variable displacement motor
32 520L0602 • Rev AA • January 200832
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualVariable displacement motor
b21
B40
B51
b51a
n02
B19
b15B16
B18
F05
f04
F01F03
B22
B25
B26
B27B28
B29
B30
B31
B54
B36
b32
T02
t01
t04
T03b45a
B45
B37
B40
Enlarged bold type itemnumbers are recomendedparts to stock for servicing.
E100 515E
B24
33520L0602 • Rev AA • January 2008 33
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualVariable displacement motor
common parts order date date Qty. per code Item begin end part number part name model/kit B15 95-42 9004300-1460 O-ring 1
B16 95-42 4250027 Trunnion cover 1
B18 95-42 378083 (9007210-0804) Screw 4
B19 95-42 4800470 Bearing kit 1
B21 95-42 4350148 Thrust plate 1
B22 95-42 4350291 Cylinder block kit 1
B24 95-42 4350628 Cylinder block 1
B25 95-42 4350012 Washer 1
B26 95-42 4350172 Spring 1
B27 95-42 9009625-0105 Washer 1
B28 95-42 9006250-0162 Retaining ring 1
B29 95-42 9004875-0109 Holddown pin 4
B30 95-42 4350048 Holddown pin retainer 1
B31 95-42 4350186 Slipper retainer guide 1
B32 95-42 4350253 Piston assembly 9
B36 95-42 4350185 Slipper retainer 1
B37 95-42 4350145 End cap gasket 1
B40 95-42 5000529 Pin (SB-1998-092) 2
B45 95-42 664524 (9005110-9000) Plug assembly 1
B45A 95-42 001156 (9004201-7500) O-ring 1
B51 95-42 664524 (9005110-9000) Plug assembly 1
B51A 95-42 001156 (9004201-7500) O-ring 1
B54 95-42 4350187 Thrust washer 1
F01 95-42 4350732 Trunnion cover assembly 1
F03 95-42 378083 (9007210-0804) Screw 4
F04 95-42 9004300-1460 O-ring 1
F05 95-42 4800470 Bearing kit 1
N02 95-42 5000604 Lip seal (SB-2000-026) 1
T01 95-42 4350754 Valve plate (SB-1999-058) 1
T02 95-42 9004700-1910 Slotted pin 1
specIaL hardware NNN T03 95-42 9006200-0281 Retaining ring 1
T04 95-42 373282 (9001315-0011) Ball bearing 1
NNR T03 95-42 9006200-0281 Retaining ring 1
T04 95-42 357616 Roller bearing (SB-1998-008) 1
34 520L0602 • Rev AA • January 200834
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
overhauL seaL KIt order date date Qty. per code Item begin end part number part name model/kit 4510148 Overhaul seal kit, MMV035/44D 1
B15 95-42 9004300-1460 O-ring, 2.612 x .099, nitrile, 70D 1
B37 95-42 4350145 End cap gasket 1
B45A 95-42 001156 (9004201-7500) O-ring, .9.24 x .116, nitrile, 90D 1
B51A 95-42 001156 (9004201-7500) O-ring, .9.24 x .116, nitrile, 90D 1
C01 95-42 5000689 Lip seal (SB-2003-018) 1
C04 95-42 5000465 Lip seal 1
C06 95-42 9004100-0280 O-ring, 1.364 x .070, nitrile, 70D 1
E03 95-42 076042 (9003509-0012) Seal nut, M12 1
F04 95-42 9004300-1460 O-ring, 2.612 x .099, nitrile, 70D 1
G05A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 1
G08A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 2
G27A 95-42 085043 (9004201-3700) O-ring, .468 x .078, nitrile, 90D 1
N02 95-42 5000604 Lip seal (SB-2000-026) 1
Variable displacement motor
35520L0602 • Rev AA • January 2008 35
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-1998-008
Series 40: M35 and M44 motors
Shaft bearing in high capacity special hardware option
As a product improvement, Sauer-Danfoss changed the roller bearing Series 40: M35 and M44 motors equipped with the high capacity special hardware option. This change allows for motors equipped with this option to withstand a greater thrust load.
The new bearing is interchangeable with the old bearing.
M35 motors M44 motors 4353025 4353049 4443026 4353033 4353052 4443028 4353034 4353053 4443029 4353042 4353055 4443032 4353043 4354027
This change became effective at serial number A-98-06-xxxxx.
Interchangeable
Item description old part number new part number Roller bearing 5000461 357616
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
Bearing
36 520L0602 • Rev AA • January 200836
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-1998-092
Series 40: M35 and M44 variable motors, variable pumps, and tandem pumps
Housing to end cap dowel pin change
Sauer-Danfoss introduced a design improvement to the dowel pins that align the variable housing and end cap for the Series 40: M35 and M44 variable motors, variable pumps, and tandem variable pumps.
Each variable motor and variable pump assembly uses two dowel pins to align the end cap to the pump housing. The assembly is designed so the dowel pin is installed in the variable housing before the end cap is positioned on the assembly. The tandem variable pump uses the same dowel pin to align the two halves of the tandem pump assembly. Previously, a slip fit existed between the holes in the variable housing and the pin.
The design of the dowel pin changed to incorporate a knurled section on the pin. The fit between the dowel pin and the pilot hole in the variable housing changed to a slight interference fit. This change improves the serviceability of the motor and pump assembly, by reducing the potential for the pins to dislodge from the housing when servicing the product.
To help indentify this change, we have a new dowel pin part number. The new pin is completely interchangeable with the old pin. The old pin remains available as a service item, since it is in a variety of Sauer-Danfoss applications.
M35-4xxx, 4354xxx and 4444xxx variable displacement motorsM35-2xxx, 4352xxx and 4442xxx variable displacement pumpsM91-35xxx, 4355xxx and 4445xxx tandem pumps
This change became effective at serieal number A-99-10-xxxxx
modeLs affected
serIaL numbers
old dowel pin new dowel pin 5000529 9004800-3708
part numbers affected
InterchangeableUse parts in stock
parts dIsposItIon
37520L0602 • Rev AA • January 2008 37
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-1999-058
Series 40: M25 fixed and U-style, M35, M44, and M46 fixed and variable motors
Valve plate change
As a product improvement, Sauer-Danfoss modified the finish on Series 40 motor valve plates. This change improves the plate’s ability to develop and retain a suitable oil film, especially at initial start-up.
New part numbers for all Series 40 motor valve plates identify this change. This is an interchangeable change. The old part numbers are obsolete. They are no longer available as a service part.
Series 40: M25 fixed motors and M25 motor sections within M25 U-style transmissions
Series 40: M35 and M44 fixed motors
Series 40: M46 fixed and variable motors
This change became effective at serial number A-99-34-xxxxx for all Series 40 M25 fixed motors and M25 motor sections of U-style transmissions.
This change became effective at serial number K-00-18-xxxxx for all Series 40 M35 and M44 fixed motors and all M46 fixed and variable motors
Interchangeable
frame size Item description old part number new part number M25 Motor valve plate 4250073 4250143
M35 and M44 Square key 4350159 4350754
M46 Motor valve plate 4460119 4461105
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
38 520L0602 • Rev AA • January 200838
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-2000-026A
Series 40: M25, M35, and M44 pumps and variable motors
Trunnion seal change
As a product improvement, Sauer-Danfoss made a design change to the trunnion seal on Series 40: M25, M35, and M44 pumps and variable motors. The dust lip is extended, allowing more installation concentricity tolerence, and more forgiving during installation. Now there will be fewer low-hour trunnion seal failures caused by improper installation.
The new seal is interchangeable with the old seal. Sauer-Danfoss recommends that the seal be replaced when servicing these units. The old seal (5000465) remians available as it is in other Sauer-Danfoss product lines.
Series 40: M25, M35 and M44 pumps and variable motors
This change became effective at serial number K-00-46-xxxxx
Interchangeable
Item description Old part number New part number Trunnion seal 5000465 5000604
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
Trunnion lip seal
39520L0602 • Rev AA • January 2008 39
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-2002-021
Series 40: M25, M35, M44, M46, and LV pumps and motors
Change from woodruff key to straight key on tapered shaft
Sauer-Danfoss uses a straight key rather than a woodruff key in tapered shafts on all Series 40 pumps and motors. Tapered shafts requiring a woodruff key are obsolete. The woodruff key, however, remains available for service requirements. Customers requiring a replacement shaft need the straight key.
Series 40: M25, M35, M44, M46, and LV pumps and motors using tapered shafts
This change will become effective during the 2002 build year.
Interchangeable if shaft and key are both replaced
Use parts in stock
Scrap new parts and apply for credit
old part number new part number description 9003310-2514 - Key-woodruff, .248 x .875
- 5000664 Key-square, .250 x .750
4250012 4250164 Shaft, tapered
4254500 4254568 Shaft, tapered
4350390 4350805 Shaft, tapered
4350432 4350791 Shaft, tapered
4460309 4461308 Shaft, tapered/9t. aux.
4461290 4461302 Shaft, tapered/13t. aux.
4460577 4461309 Shaft, tapered
4460804 4461306 Shaft, 13-tooth/tapered aux.
4460772 4461307 Shaft, tapered
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
Woodruff key Straight key
40 520L0602 • Rev AA • January 200840
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
M35 and M44 pumps and variable motors
Shaft seal change
descrIptIon As a product improvement, Sauer-Danfoss has improved the design of the shaft lip seal. The new seal is a single piece design instead of a crimped two-piece design.
modeLs affected
serIaL numbers
part numbers affected
M35, and M44 pumps and variable motors
This change became effective at serial number K-03-49-xxxxx.
parts dIsposItIon Interchangeable
Service Bulletin: SB-2003-018
Item description old part number new part number Lip seal 9008000-0121 5000689
Shaft lip seal
41520L0602 • Rev AA • January 2008 41
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-2005-015
Series 40 fixed motors with loop flushing option (M25, M35, M44)
Loop flush return spring.
As a product improvement aimed at reducing assembly risk and increasing quality, Sauer-Danfoss is making the following change to series 40 fixed motors with loop flushing option (M25, M35, M44): Spring-helical compression (Old P/N 4800225) will change to spring-helical compression (New P/N 4800887). This change will be visually detectible as that the ends of the new spring will be tapered smaller allowing it to snap onto the spring guide (P/N 512257) holding the two parts together.
All parts are completely interchangeable in fit and function.
All series 40 fixed motors with loop flushing option (M25, M35, M44)
Change will go into effect starting: K-06-03-XXXXX
Interchangeable
Old part number New part number Description 4800225 4800887 Spring
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
From: 4800225
To: 4800887
42 520L0602 • Rev AA • January 200842
Series 40 MMF035D and MMV035D Axial Piston MotorsParts Manual
products affected
subject
descrIptIon
Service Bulletin: SB-2007-015
Series 40 M35 M44 fixed motors
Shaft seal
As a product improvement, Sauer-Danfoss has changed the shaft seal used in the series 40 M35 and M44 fixed motors. The new shaft seal and old shaft seal are completely interchangeable. The old shaft seal is obsolete and no longer available for service.
Series 40 M35 and M44 fixed motors using tapered shafts
This change will become effective at serial number A-05-07-xxxxx
Interchangeable
description old part number new part number Seal 9008000-0121 5000689
modeLs affected
serIaL numbers
part numbers affected
parts dIsposItIon
43520L0602 • Rev AA • January 2008 43
Series 40 MMF035D and MMV035D Axial Piston MotorsParts ManualNotes
sauer-danfoss mobile power and control systems– market Leaders worldwide
Sauer-Danfoss is a comprehensive supplier providing complete systems to the global mobile market.
Sauer-Danfoss serves markets such as agriculture, construction, road building, material handling, municipal, forestry, turf care, and many others.
We offer our customers optimum solutions for their needs and develop new products and systems in close cooperation and partner ship with them.
Sauer-Danfoss specializes in integrating a full range of system components to provide vehicle designers with the most advanced total system design.
Sauer-Danfoss provides comprehensive worldwide service for its products through an extensive network of Global Service Partners strategically located in all parts of the world.
our products
Hydrostatic transmissions
Hydraulic power steering
Electric power steering
Electrohydraulic power steering
Closed and open circuit axial piston pumps and motors
Gear pumps and motors
Bent axis motors
Orbital motors
Transit mixer drives
Proportional valves
Directional spool valves
Cartridge valves
Hydraulic integrated circuits
Hydrostatic transaxles
Integrated systems
Fan drive systems
Electrohydraulics
Microcontrollers and software
Electric motors and inverters
Joysticks and control handles
Displays
Sensors
Local address:
Sauer-Danfoss (US) Company2800 East 13th StreetAmes, IA 50010, USAPhone: +1 515 239-6000Fax: +1 515 239 6618
Sauer-Danfoss GmbH & Co. OHGPostfach 2460, D-24531 NeumünsterKrokamp 35, D-24539 Neumünster, GermanyPhone: +49 4321 871-0Fax: +49 4321 871 122
Sauer-Danfoss ApSDK-6430 Nordborg, DenmarkPhone: +45 7488 4444Fax: +45 7488 4400
Sauer-Danfoss-Daikin LTDSannomiya Grand Bldg. 8F2-2-21 Isogami-dori, Chuo-kuKobe, Hyogo 651-0086, JapanPhone: +81 78 231 5001Fax: +81 78 231 5004
520L0602 • Rev AA • January 2008