Welcome Before we start please check that your audio is setup and working Use Tools->Audio->Audio Setup Wizard and following the instructions If you haven’t used OU Live before take a moment to investigate the user interface We’re aiming to start at 19:00
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Welcome
Before we start please check that your audio is setup and working
Use Tools->Audio->Audio Setup Wizard and following the instructions
If you haven’t used OU Live before take a moment to investigate the user interface
We’re aiming to start at 19:00 from 18:45 until then is for sorting out the technologies
BEFORE WE START...........• I’d like to record this session for those unable
to attend
• If you would rather the session was not recorded, i.e. if you do not consent, please click the red cross. Otherwise click the green tick
• The session will only be recorded if everyone agrees to it
Sense and Sense Ability
Online session IITU100 13J
We’re going to cover.....
• Palettes and where to find the various blocks
• Saving and loading scripts
• Distinguishing between types of block
• Creating and running scripts
• Editing scripts
• Troubleshooting
• We’re not doing loops and variablesWe’re not doing loops and variables
Multi task
• Open Sense in the background – I’ll leave time for experimenting and looking around as we work through this tutorial
• We’re going to take it slowly so don’t worry
• By all means play but show consideration for others
• Let me know that you are ready to continue by showing a green tick
Naming of the parts
• The next slide shows the names for some of the bits of the UI (user interface)
• If I use any term which you don’t understand you must stop me and ask!
• Note that the UI has a number of right-click menus; if you can’t see what you need try the right-click
• You won’t see a sprite just yet but don’t worry.........
Saving and loading
• As with most applications use the “Save” or “Save as” options to save the project
• Use the “About this project” section to keep a note of what the project is about
• Load projects using the “Open” option
• As we work through this session you might want to save your scripts….
Creating a sprite
Give the sprite a name
At this stage you will draw your sprite using “Paint”
Use “Show” (on the right-click menu) to put your sprite on the stage