Sem - VI: Mech / Auto There won’t be any other Batch apart from these for Sem - VI Subject Batch Type By Starts At Fees Note Mech. Vibration (G) Record marks of 96/100 was scored by our student: Omkar Nerurkar - K J Somaiya 6 hrs/week : Total = 102 hrs Syllabus completes before VIVA starts. Regular 1 st Batch Irfan sir 11 th Jan’18 (Every Thursday) 6:30pm to 9:45pm Dadar Batch code: B 8500 * Extra Lectures for both the Batches will be on every Sunday Slot - A: 4:15pm to 7pm or Slot - B: 7pm to 9:45pm Student needs to specify the preferred slot for extra lecture at the time of admission Regular 2 nd Batch Irfan sir 13 th Jan’18 (Every Saturday) 8:45am to 12noon Dadar Batch code: F Machine Design - I (G) Record marks of 95/100 was scored by our student: Siddharth Bhat – D J Sanghvi KT Saver Batch Irfan sir Refer Last column Dadar Batch code: E Refer Last column Detailed schedule is given on Pg - 3 F.E.A Record marks of 92/100 was scored by our student: Shivchandra Walke - Thakur College Vacation Sanjay sir 20 th Dec’17 Details on Pg - 4 Dadar Batch code: G 8500 * Special session on Ansys Software (WorkBench & APDL) will be taken to help students in their Practical Exam Refer Pg - 7 for Details about FEA Practical Session Regular Sanjay sir 10 th Jan’18 (Every Wednesday) 6:30pm to 10pm Dadar Batch code: H 14 th Jan’18 (Every Sunday) 8am to 11:30pm Borivali Batch code: K 12 th Jan’18 (Every Friday) 6:30pm to 10pm Thane Batch code: L Mechatronics Record marks of 90/100 was scored by our student: Anirudh Iyer - DBIT Public Holiday Batch Sanjay sir 26 th Jan’18 (Republic Day) Dadar Batch code: M 5500 * Detailed schedule is given on Pg - 5 T.F.P.E (G) Outstanding marks of 93/100 was scored by our student: Ankita Sheoran - VECT: May’17 Crash Crash Batch Irfan sir April 2018 (11 lec x 4hrs) Dadar Batch code: N 6000 * Tentative Lecture Plan is given on Pg - 6 Final Timetable will be uploaded in Mar’18 * The fees given above, apply to the student joining that single subject only. Students joining more than one subject will be getting the benefit of discounted fees. Details given on Pg - 2. The superscript (G) written on the subjects represent that, these are the Core Foundation subjects for GATE, IES Exams, Placement Interviews etc. Many of the Higher Semester Subjects require concepts of MD-1, Mech. Vibration and TFPE. Note: Colleges start from 8 th Jan’18. Exams would start from 8 th May’18. It is always better for a student to join certain subjects in Vacation, certain in Regular, certain on Public Holidays and certain in Crash so as to distribute the pressure, make proper utilisation of time and smartly prepare for the most heavy semester of Mechanical Engineering. All varieties of Concepts, Derivations & Numericals would be taken in the class. Full set of Revised & Updated Notes for May’18 Exam would be provided. There won’t be any change in the timetable. The timetable has been designed, so that none of the batches of a particular semester would ever clash with each other. The Batches have been designed not only to help the student clear the paper but also to top his/her respective college and excel in all the competitive examinations like GATE, IES, UPSC, Engineering Olympiads etc along with confidently facing Technical Interviews at the time of placement. Address: Room - 112, 1 st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w). ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- www.irfansir.com | Call: 9820341855 | Playstore: Irfan sir: Mech | Whatsapp: 9820341855
7
Embed
Sem - VI: Mech / Auto - Irfan sir · Sem - VI: Mech / Auto ... Vacation Sanjay sir 20 th Dec’17 Details on Pg - 4 ... The timetable has been designed so that, none of the Sem -
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Sem - VI: Mech / Auto
There won’t be any other Batch apart from these for Sem - VI
Subject Batch Type By Starts At Fees Note
Mech. Vibration(G)
Record marks of 96/100 was scored by our
student: Omkar Nerurkar - K J Somaiya
6 hrs/week : Total = 102 hrs
Syllabus completes before VIVA starts.
Regular 1st Batch
Irfan sir 11th Jan’18
(Every Thursday)
6:30pm to 9:45pm
Dadar Batch code: B
8500*
Extra Lectures for both the Batches will be on every Sunday
Slot - A: 4:15pm to 7pm
or
Slot - B: 7pm to 9:45pm
Student needs to specify the preferred slot for extra lecture at the time of admission
Regular 2nd Batch
Irfan sir 13th Jan’18
(Every Saturday)
8:45am to 12noon
Dadar Batch code: F
Machine Design - I(G)
Record marks of 95/100 was scored by our
student: Siddharth Bhat – D J Sanghvi
KT Saver Batch
Irfan sir Refer Last column Dadar
Batch code: E Refer Last
column Detailed schedule is given on Pg - 3
F.E.A
Record marks of 92/100 was scored by our student: Shivchandra Walke - Thakur College
Vacation Sanjay sir 20th Dec’17
Details on Pg - 4 Dadar
Batch code: G
8500*
Special session on Ansys Software (WorkBench & APDL) will be taken to help students in their Practical Exam
Refer Pg - 7 for Details about FEA Practical Session Regular Sanjay sir
10th Jan’18 (Every Wednesday)
6:30pm to 10pm
Dadar Batch code: H
14th Jan’18 (Every Sunday)
8am to 11:30pm
Borivali Batch code: K
12th Jan’18 (Every Friday)
6:30pm to 10pm
Thane Batch code: L
Mechatronics
Record marks of 90/100 was scored by our student: Anirudh Iyer - DBIT
Public Holiday Batch
Sanjay sir 26th Jan’18 (Republic Day)
Dadar Batch code: M 5500* Detailed schedule is given on Pg - 5
T.F.P.E(G)
Outstanding marks of 93/100 was scored by our student: Ankita Sheoran - VECT: May’17 Crash
Crash Batch Irfan sir April 2018
(11 lec x 4hrs)
Dadar Batch code: N 6000*
Tentative Lecture Plan is given on Pg - 6
Final Timetable will be uploaded in Mar’18
* The fees given above, apply to the student joining that single subject only. Students joining more than one subject will be getting the benefit of discounted fees. Details given on Pg - 2.
The superscript (G) written on the subjects represent that, these are the Core Foundation subjects for GATE, IES Exams, Placement Interviews etc. Many of the Higher Semester Subjects require concepts of MD-1, Mech. Vibration and TFPE.
Note: Colleges start from 8th Jan’18. Exams would start from 8th May’18. It is always better for a student to join certain subjects in Vacation, certain in Regular, certain on Public Holidays and certain in Crash
so as to distribute the pressure, make proper utilisation of time and smartly prepare for the most heavy semester of Mechanical Engineering. All varieties of Concepts, Derivations & Numericals would be taken in the class. Full set of Revised & Updated Notes for May’18 Exam would be provided. There won’t be any change in the timetable.
The timetable has been designed, so that none of the batches of a particular semester would ever clash with each other. The Batches have been designed not only to help the student clear the paper but also to top his/her respective college and excel in all the competitive examinations like GATE, IES, UPSC, Engineering
Olympiads etc along with confidently facing Technical Interviews at the time of placement.
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w).
####: Refer Pg - 3 for the fees that will apply for MD - I
Note:
There is no compulsion of joining all the subjects of any particular Combo together. Admission for the remaining subjects can be taken at a later stage as well (provided seats are available), if you don’t want to take it now.
As and when the student joins the remaining subjects of any particular combo, he/she would be getting the entire benefit of the discounted fees then.
Admission Details
Admission started for all the batches of the new semester and it will be conducted only at Dadar (address given below). Call on 9820341855 to fix up an appointment. Admission can be taken from the comfort of your home by doing online payment.
Fees can be paid by Cash / Debit card / Credit Card / Online Fund Transfer / UPI or by Cheque in favour of “COURSENX EDUTECH PRIVATE LIMITED”. Students will be asked to show their College I-card in the second lecture for Verification purpose.
If you cannot come for the admission for any reason, then you can pay the fees either by transferring funds or depositing cash as per the following details;
Name: COURSENX EDUTECH PRIVATE LIMITED Current Account no: 124805000652
ICICI Bank, S. V. Road Branch, Santacruz (w), Mumbai.
RTGS / NEFT / IFSC code: ICIC0001248
Note:
Fees can also be paid via (Paytm on Mobile no: 9820341855) or (BHIM App on Mobile no: 9920704691) Once you have made the payment, please send the Pic of the Receipt / Acknowledgement of fund transfer either on
Whatsapp (9820341855) or mail it to us at [email protected] along with the following details;
Full Name of the student: College: Mobile no: Email id: Address: Subjects you want to join and its Batch codes (given in the timetable copy):
We would keep your I-cards aside. You can collect it from the staff when you come for the 1st lecture, by submitting the printout of the Receipt /Acknowledgement of Fund transfer / Deposit or showing the Pic / Sms of the same on your Mobile phone.
Admission can be taken on the 1st lecture also (provided seats are available). But the fees will be accepted only in cash.
Office Address: Room - 112, 1st floor, Pearl Centre, Tulsi Pipe Road, Senapati Bapat Marg, Above Sadguru’s office, Dadar (w) Once out of Rly. station, take immediate left (5 mins of walking distance)
Text written in Green represents the Fees that will apply along with the Weightage of portion that would be covered from the corresponding date onwards. Since a new topic would start from these dates, the student can easily understand the lecture even if he has missed the previous class.
Lec Date Day Syllabus Covered Time During
1 20th Dec’17 Wed Development of Machine Design Concepts: Material concepts, Stress
analysis, FOS & Failure theories. Design of all types of Cotter Joint (Static Approach)
Concept Development & Wahl’s line Analysis. Using “Static Approach”. Using “Soderberg Equation”
17 27th Feb’18 Tue
18 6th Mar’18 Tue
19 13th Mar’18 Tue Design of “Semi - Elliptical Springs”
20 3rd Apr’18 (Rs. 1200 – 20m)
Tue Design of “Power Transmitting Shafts” (With elements like Flat & V - Belt Pulleys, Spur & Helical Gear)
Using “ASME code”. Using “Soderberg Equation”
21 10th Apr’18 Tue
22 17th Apr’18 Last Lecture
Tue
* Timing will be from 9am to 1pm. #
Timing will be from 5pm to 9:30pm 24 x 7 Doubt Solving
Note:
Please bring “PSG Design Data Handbook - Latest Version” (available at all leading Book stalls).There won’t be any other batch apart from this (i.e. there won’t be any Regular or Crash Batch for MD - 1).
All varieties of Concepts and Design based questions would be taken in the class. Full set (Theory Notes + Diagram set + SP set + Concept booklet + Q. Set) of Revised & Updated notes for May’18 Exam would be provided. There won’t be any change in the timetable. The timetable has been designed so that, none of the Sem - VI batches would ever clash with each other.
This batch has a track record of helping students score decent marks in their End Sem Exam and builds a strong base for MD-2 (Sem - VII) and DMS (Sem - VIII).
Address: Room - 112, 1st floor, Pearl centre, Above Sadguru’s, Opp. Vidyalankar’s office, S. B. Marg (Tulsi Pipe road), Dadar (w). Once out of Rly. Station (west side); take immediate right, 5 mins walking distance.
Note: Please bring Steam Table (by R. S. Khurmi), 4 different colour gel pens & highlighters in the 1st lecture. T.F.P.E. paper usually would be 85% to 90% (Numerical + Derivation
based) & 10% to 15% (Theory based). It is the next subject in the series of Thermal and Fluid sciences (after Thermodynamics, Fluid Mechanics, Heat Transfer & I. C. Engine). Concepts developed here would be used to understand Mechanical Utility systems (also known as T.F.P.E-2) in Sem - VII and Refrigeration & Air-Conditioning in Sem - VIII.
Full set of Simplified, Refined and Updated Notes (for May’18 Exam) would be provided during the lectures along with the Solved Problem set. Highest Quality Study material has been prepared by referring to more than 15 Standard Books on the subject and selecting all Typical Numericals from the last 44 University papers, up to the recent paper of Nov’17.
All the concepts required from Thermodynamics and Fluid Mechanics would be revised first and then the new concepts of T.F.P.E. would be explained, so that understanding the subject becomes easy and automatic. There would be 15 mins of Personal Doubt Solving Session at the end of every lecture. Optimum utilisation of Audio/Visual would be made throughout the Crash Course to enhance the level of understanding. All the concepts related to Velocity triangles will be explained in detail. Around 50 marks syllabus of TFPE and 60% syllabus of MUS (Sem - VII) are based on it.
Crash Course has been efficiently designed by Irfan sir so that any type of student can attempt at least 95% of the paper with ease. It has been designed not only to help
the student clear the paper but also to top his/her respective college and excel in all the competitive examinations like GATE, IES, UPSC, Engineering Olympiads etc along
with confidently facing Technical Interviews at the time of placement. Over the years, 90% of the times, University Toppers had been from Irfan sir’s T.F.P.E. Batch.
Outstanding Marks scored by our last year’s Crash Batch student: Ankita Sheoran - 93/100 (VECT - May’17 Exam).