Automatic tapping unit RA Three tool holder options: - Jacobs 1, rigid tapping chuck, radial compensating tapping chuck - Multispindle heads can be attached to the quill ø36 mm. - The unit advance and retracts through a high precision CNC machined lead screw, all driven by a three phase motor. The in line mounting of the spindle and leadscrew guarantees a true pitch conversion. - Lead screw works in oil bath, assuring a long life and smooth operation. - All tapping machines have a safety switch (no-hole presence), avoiding the breakage of tools. - Vertical or angular positioning is possible using the universal support SU-54 or SH-54. TECHNICAL DATA Model Tapping capacity Total Stroke Feed RPM range Motor voltage Motor power Weight RA 3 / 16” (M4) 1.96” (50 mm) Leadscrew 1700 - 2400 220 / 380 / 440 V 0,25 kW 13,5 Kg Jacobs 1 FEATURES Rigid tapping chuck Radial compensating tapping chuck Three phase motor Interchangeable timing pulleys and belt Cast aluminum body Advance micro switch Retract micro switch Safety switch Grounded quill, guided on honed housing Adjustable cam for stroke setting Interchangeable leadscrew, in oil bath DRILLMASTER INDÚSTRIA E COMÉRCIO DE MÁQUINAS LTDA. - EPP Rua Alfredo Bernardo Leite, 727 - Vila Santa Luzia - São Bernardo do Campo - SP - CEP: 09670-000 Self-feed Tapping Unit 0,25 Toolholder Jacobs 1 Leadcrew pitch Rigid tapping chuck Radial floating tapping chuck = = = Motor size 63 - 60 Hz poles Poles (Dimensions between brackets in inches) 17 3/16”