This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way.
In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.
OPERATING GLOBALLY
Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.
• Other options available - Electric heating - Fresh-water and sea-water tube condenser - Pre-wired
Dimensions
Notes1. Certified dimension drawings available on
request.2. The minimum required clearance at the back
of unit is zero. Clearance above and at right (90MA*8, *12 only) and at left of the unit depends on space required for accessory plenum, ductwork, condenser piping, accessory heater piping, condensate drain line and power wiring.
3. Water connections are located on left side of unit (Refer to “Make Condenser Connection”, Condensate drain connections are located on left side of unit for *4 & *6 and on both sides of unit for *08 & *12.
EVAPORATOR COIL 3/8 (.95 cm) OD, Copper tubes, Aluminium fins
Tube type Prime
Quantity of rows... Fin spacing - cm 2...5.7 3...5.7 3...4.9 2...5.7 3...5.7 3...4.9 2...5.7 3...5.7 3...4.9
Face area - Sq m 0.46 0.46 0.68 0.79 0.46 0.46 0.68 0.79 0.46 0.46 0.68 0.79
RETURN AIR FILTERS Factory-supplied, cleanable
Quantity... Size - cm 2...40.6 x 63.5 x 2.5 4...40.6 x 50.8 x 2.5 2...40.6 x 63.5 x 2.5 4...40.6 x 50.8 x 2.5 2...40.6 x 63.5 x 2.5 4...40.6 x 50.8 x 2.5
CONDENSER CONNECTIONS
Water inlet (bottom) & outlet (top) inch
1/2 3/4 1 1 1/2 3/4 1 1 1/2 3/4 1 1
Maximum working pressure - kPa(refrigerant side)
2758 2758 2758
CRETURNONDENSATE DRAIN inch CONNECTIONS
3/4 3/4 3/4
LEGEND FPT = Female Pipe Thread I MPT = Male Pipe Thread I ODF = Outside Diameter Female NOTE 1: Motors and drives other than those supplied with the unit must be purchased separately. Contact your Carrier Transicold representative
Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.
Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.
EVAPORATOR AIR FAN Adjustable, belt-driven centrifugal: 1750 RPM motor @ 60 Hz
Nominal flow - m3/h 4245 5660
Standard speed range - RPM 412 - 583 500 - 708
Maximum allowable - RPM 1050
Belt quantity/Pulley pitch diameter - cm 1 / 21.6 1 / 17.8
Motor pulley pitch diameter range - cm 6.1 - 8.6
Motor nominal rating (@ 60 Hz)... Frame Size
Standard - kW .75 / 56 1.5 / 56
Alternate (See Note 1) - kW 1.5 / 56 2.2 / 56
Alternate (See Note 1) - kW 2.2 / 56 ----
EVAPORATOR COIL 3/8 OD, Copper tubes, Aluminium fins
Tube type
Quantity of rows... Fin spacing - cm 3... 4.9
Face area - Sq m 0.68 0.79
RETURN AIR FILTERS Factory-supplied, cleanable
Quantity... Size - cm 4... 40.6 x 50.8 x 2.5
CONDENSER CONNECTIONS
Water inlet (bottom) & outlet (top) - inch 1 1
Maximum working pressure - kPa(refrigerant side)
2758
CRETURNONDENSATE DRAIN - inch CONNECTIONS
3/4
LEGEND FPT = Female Pipe Thread I MPT = Male Pipe Thread I ODF = Outside Diameter Female NOTE 1: Motors and drives other than those supplied with the unit must be purchased separately. Contact your Carrier Transicold representative