Security System-First draft of storyboard

VO:- How does the system work?Note:- Text Animation

VO:- Put the camera sensor in the area you would like to protect.Note:- camera sensor put in the car

VO:- Then simply enter your alarm code into the keypad, and leave the area.

Note:- Then enter the alarm code into the keypad

VO:- When a violator enters the area,Note:- A violator enters into the car

VO:- the sensor will trigger the alarm, andNote:- than the sensor are activated

VO:- the camera will begin to record and transmit video.Note:- and camera started recording

VO:- The alarm panel will then connect toNote:- than the alarm panel monitoring station

VO:- the 24 hour monitoring station and begin transmitting.Note:- In monitoring station security getting the live video

VO:- Our 24 hour monitoring stationNote:- Line animation monitor to next slide.

VO:- will immediately contact you andNote:- Line animation and zoom on phone & massage then open video

clip.

VO:- send the video of the intrusion directly to your phone or computer,

Note:- Scale up table and computer then appear video on monitor and phone.

VO:- and you can choose to take whatever action you deem appropriate.

Note:- zoom on character and phone & take action tag scale down to up.

VO:- There is no need to run any wires, or even use a screwdriver.

Note:- wires and screwdriver icons appears according to vo.

VO:- Your system can begin protecting you in minutes.Note:- Logo Scale down to up protection tag scale up to down on

monitor.