PROJECTS & DEVELOPMENT INDIA LTD PNPM/PC150/E/112/SEC- VI-10.0 0 Document No Re Sheet 1 Of 35 FORM NO: 02-0000-0021F1 REV2 All rights reserved SECTION – VI-10.0 VENDOR LIST PLANTS: CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES PROJECT: INTEGRATED COAL BASED FERTILISER COMPLEX AT TALCHER, ANGUL DISTRICT, ODISHA (INDIA)
75
Embed
SECTION – VI-10.0 VENDOR LIST PLANTS: CONSTRUCTION OF …tflonline.co.in/pdf/CPP-NOTICE-Part-3-of-3.pdf · a) iit madras b) govt approved agency 12.0 cement a) acc b) j k cement
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PROJECTS & DEVELOPMENT INDIA LTD
PNPM/PC150/E/112/SEC-VI-10.0
0
Document No Re
Sheet 1 Of 35
FORM NO: 02-0000-0021F1 REV2 All rights reserved
SECTION – VI-10.0
VENDOR LIST
PLANTS: CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES
PROJECT: INTEGRATED COAL BASED FERTILISER COMPLEX AT TALCHER, ANGUL DISTRICT, ODISHA (INDIA)
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 2 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1.0 CIVIL
GENERAL NOTES:
i. Only ‘First’ Quality materials shall be used
ii. OWNER / CONSULTANT reserve the right to choose any of the approved make / vendor as per this list. Make of the item not indicated and any other make for the specified item shall be subject to owner’s / consultant’s approval.
iii. Specifications of manufacturer’s items shall be checked against tender item / specifications
before selecting any product or brand name. In case of any discrepancy, tender item / specifications shall prevail, and any such brand of item shall not be used which is not conforming to tender specifications even if it is listed in this vendor list.
iv. In case of non-availability of any material among approved vendors / makes in a particular site / region, alternate vendor / make conforming to IS / BS etc. Shall be used subject to approval by OWNER / CONSULTANT.
SL. NO. ITEM NAME
1.0 FLOOR FINISHING
1.1 CEMENT TILES (FLOOR/WALL)
a) EUROCON b) ALTRA TILE PVT. LTD. c) DAZZLE
1.2 TERRAZZO TILES A) NITCO B) HINDUSTAN TILES
1.3 CERAMIC TILES
a. SOMANY CERAMICS b. H&R JOHNSON CERAMICS c. KAJARIA CERAMICS d. ORIENT CERAMICS
1.4 HEAVY DUTY FLOOR TILES
A) BHARAT TILES B) RESTILE CERAMICS C) PELICAN CERAMIC INDUS. D) PAVIT E) SONA TILES
1.5 INDUSTRIAL FLOOR HARDENER ADMIXTURE
a) PIDILITE INDUSTRIES b) SIKA c) CICO.
1.6 PVC ROLLS
A) PREMIER VINYL B) ARMSRONG INARCO C) RMG POLYVINYL
1.7 PVC TILES A) ARMSTRONG
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 3 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1.8 PVC TILES/ROLL ANTISTATIC
A) PREMIER VINYL B) RMG POLYVINYL C) ARMSTRONG
1.9 ACID RESISTANT TILES(BATTERY ROOM)
A) H&R JOHNSON OR APVD. EQUIV.
1.10 MOSSAIC TILE
A) ITALIS B) SPECIFIC GLASS MUSSAIC INDIA LTD.
2.0 WOODWORK
2.1 FLUSH DOOR A) GREEN B) CENTURY DOORS C) KITPLY PRODUCTS
2.2 PLY WOOD/BLOCK BOARD A) CENTURY B) KITPLY PRODUCTS C) GREEN PLY
2.3 PARTICLE BOARD (EXTRA GRADE)
A) BHUTAN BOARD B) NOVAPAN INDIA LTD.
2.4 MDF BOARD/MD PARTICLE BOARD (EXTRA GRADE)
A) NUCHEM LTD. B) MANGALAM TIMBER PRODUCTS LTD. C) WESTERN BIO SYSTEMS LTD.
2.5 DECORATIVE LAMINATES
A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID
2.6 MARINE PLYWOOD
A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID
2.7.0 DOORS & WINDOWS FITTINGS
2.7.1 MORTICE LOCKS WITH HANDLES
A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET
2.7.2 CYLINDRICAL PIN TUMBLER LOCK WITH KNOBS
A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET
2.7.3 HYDRAULIC DOOR CLOSER (OVER HEAD/ FLOOR)
A) OZONE B) EVERRITE AGENCIES (P) LTD. C) HARDWYN
2.7.4 MISC. DOOR FITTINGS HINGLE, TOWER BOLTS, LATCHES,
A) EVERITE AGENCIES (P) LTD. B) EBCO DINSUTRIES
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 4 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
SOPPER, STAYS, ALDROPS ETC. D) OZONE E) HARDWYN
2.7.5 THREE WAY BOLTING LOCKING DEVICE HANDLE
A) SRIMA SALES & SERVICES B) DHIMAN INDUSTRIES
2.7.6 PANIC BAR LATCH (FOR EMERGENCY DOOR)
A) SRIMA SALES & SERVICE
2.7.7 UPVC WINDOWS A) FENESTA B) ENCRAFT C) WINDOW MAGIC
2.7.8 FASTENERS A) HILTI INDIA PVT. LTD. B) FISCHER
3.0 STEEL / ALUMINIUM DOORS, WINDOWS & VENTILATOR
3.1 PRESSED STEEL DOORS WINDOWS & SECTION DOORS WINDOWS/ROLLING SHUTTER
A) RAYMUS ENGINEERS B) DHIMAN STEEL C) RDG ENGINEERING D) SUPER STEEL WINDOW CO. E) SKS STEEL INDUS.
3.2 ALMUNIUM / DOORS/ WINDOWS SECTIONS
A) JINDAL ALUMINIUM LTD. B) HINDALCO INDUSTRIES C) INDAL
3.3 FIRE-PROOF DOORS(APPROVED)
A) NAVAIR INTERNATIONAL B) RDG ENGINEERING
3.4 PVC DOORS / WINDOWS A) SINTEX OR APPVD EQUIV. 3.5 PVC WATER TANKS A) SINTEX OR APPVD EQUIV. 4.0 PLASTERING
4.1 WATERPROOFING/ COMPOUND IN CEMENT PLASTER
A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) PIDILITE INDUSTRIES C) SIKA
5.0 ROOF TREATMENT (WATER PROOFING)
5.1 BRICK BAT COBA A) INDIA WATER PROOFING CO. B) OVERSEAS WATERPROOFING CORPN.
5.2
CRYLIC BASED CEMENTATIOUS PRIMER COATING FOR ROOF WATERPROOFING
A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) SIKA QUALCRETE LTD. C) PIDILITE INDUSTRIES
C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) KANSAI NEROLAC PAINTS LTD.
6.2 DRY OILBOUND DISTEMBER A) ASIAN PAINTS LTD. B) KANSAI NEROLAC PAINTS LTD.
6.3 INDUSTRIAL / EXPOXY/ SYNTHETIC ENAMEL PAINTS
A) ICI/AKZO NOBEL INDIA B) BERGER PAINTS LTD. C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) INTERNATIONAL MARINE COATINGS PVT. LTD. F) KANSAI NEROLAC PAINTS LTD. G) BOMBAY PAINT
6.4 WATERPROOFING CEMENT PAINT
A) KILLICK NIXON LTD. B) RAJDOOT PAINTS
6.5 WOOD MELAMINE POLISH A) ASIAN PAINTS B) SHALIMAR PAINTS C) WEMBLY PAINTS
12 BOTELI VALVE GROUP CO. LTD. (Y - TYPE ONLY: 14" (150#) & 3" (300# & 600#))
CHINA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 26 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
STEAM TRAPS
1 GREAVES LTD. INDIA
2 PENNANT ENGINEERING PVT. LTD. INDIA
3 VIRGO ENGINEERS LTD. (1/2” to 4” (upto 600#) (CS/SS)) INDIA
4 YARWAY CORPORATION INDIA
5 ZOLOTO INDUSTRIES (15 mm to 25 mm) INDIA
6 GESTRA AG GERMANY
7 ARMSTRONG INTERNATIONAL INC. U.S.A
8 OGONTZ CORPORATION U.S.A
9 TYCO INTERNATIONAL INC.,U.S.A. U.S.A
SPRING SUPPORTS
1 MYRICS PIPING SYSTEM PVT.LTD. INDIA
2 PIPE SUPPORTS INDIA PVT. LTD. INDIA
3 PIPING & ENERGY PRODUCTS (P) LTD. INDIA
4 SARATHI ENGG. ENTERPRISES PVT. LTD. INDIA
5 SPRING SUPPORTS MFG. CO. INDIA
6 FLEXIDER S.P.A. ITALY
FASTENERS
1 AEP COMPANY INDIA
2 CAPITAL INDUSTRIES INDIA
3 CONSOLE ENGG. & FASTNERS INDUSTRIES INDIA
4 EBY FASTNERS INDIA
5 FIT TIGHT NUTS & BOLTS LTD. INDIA
6 FIX FIT FASTENERS MFG. PVT. LTD. INDIA
7 INDUSTRIAL ENGINEERING CORPORATION (SIZE UPTO 4" (M100)) INDIA
8 MEGA ENGINEERING PRIVATE LIMITED (½" TO 3" MATERIAL: CS/AS/SS)
INDIA
9 METRO MECHANICAL PVT.LTD. INDIA
10 NAGBHUSHANAM INDUSTRIES INDIA
11 NIREKA ENGG. CO. PVT. LTD. INDIA
12 PACIFIC FORGING & FASTENERS PVT. LTD. (M 10 TO M125) INDIA
13 PERFECT MARKETING (P) LTD, INDIA
14 PIONEER NUTS & BOLTS PVT. LTD. INDIA
15 PRECISION AUTO ENGINEERS INDIA
16 PRECISION ENGINEERING INDUSTRIES INDIA
17 PTD FASTNERS PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 27 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
18 SANGHVI METALS (TRADER) INDIA
19 SUNDARAM FASTENERS LIMITED INDIA
20 UDHERA FASTENERS INDIA
FIRE FIGHTING SYSTEM
1 AGNICE FIRE PROTECTION LTD. INDIA
2 BHARTIYA CACCIALANZA FIRE SYSTEMS LTD INDIA
3 BLUE STAR LTD. INDIA
4 DE'S TECHNICO INDIA
5 DE'S TECHNICO PVT. LTD. INDIA
6 FUTECH CONSULTANTS PVT. LTD. INDIA
7 GENERAL MECHANICAL WORKS INDIA
8 HD FIRE PROTECTION COMPANY INDIA
9 LAL ENTERPRISES INDIA
10 MATHER & PLATT (INDIA) LTD. (A Subsidiary
of WILO SE German)
INDIA
11 MX SYSTEMS INTERNATIONAL PVT. LTD. INDIA
12 NEWFIRE ENGINEERS SERVICES INDIA
13 PRAGATI ENGG. (PVT.) LTD. INDIA
14 PYROTEK INDUSTRIES (INDIA ) PVT. LTD. INDIA
15 RADIANT FIRE PROTECTION ENGINEERS INDIA
16 STEELAGE INDUSTRIES LTD. INDIA
17 TECHNOFAB ENGG. INDIA
18 TRI-PARULEX FIRE PROTECTION SYSTEMS INDIA
19 UNITECH MACHINES LTD INDIA
20 VIJAY FIRE PROTECTION SYSTEM LTD. INDIA
HOSE PIPE (METALLIC) & CAM LOCK COUPLING
1 AEROFLEX INDUSTRIES LIMITED (Size 6mm to 250mm dia. (SS Corrg. Flex. Hose with Braid, Braid & Assembly) INDIA
2 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA
3 D. WREN & CO. INDIA
4 FLEXATHERM EXPANLLOW PVT. LTD. (1/2” to 6”) INDIA
5 GAYATRI INDUSTRIES INDIA
6 GAYATRI INDUSTRIAL CORPORATION (UPTO 6” ID) INDIA
7 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA
8 SENIOR INDIA PVT. LTD. INDIA
HOSE PIPE (NON-METALLIC) & CAM LOCK COUPLING
1 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 28 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
4.0 ELECTRICAL
WALL MOUNTING TYPE DISTRIBUTION BOARDS 1. ADHUNIK SWITCHGEARS (P) LTD. INDIA 2. ANAND POWER LIMITED INDIA 3. ASSOCIATED SWITCHGEARS & PROJECTS
LTD. INDIA
4. AUTOMATIC CONTROLS CORPORATION INDIA 5. AVONE SYSTEM & CONTROLS INDIA 6. CONTROLS & SCHEMATICS PVT LTD. INDIA 7. C & S ELECTRIC LTD INDIA 8. ELECMECH CORPORATION INDIA 9. GLOBE ELECTRICAL INDUSTRIES INDIA
10. HAVELLS INDIA LTD. INDIA 11. HI-TECH ENGINEERS INDIA 12. HINDUSTAN CONTROL &EQPTPV. LTD. INDIA 13. INDIANA CURRENT CONTROL LTD. INDIA 14. INDO ASIAN FUSEGEAR LTD INDIA 15. INTRELEC INDIA
16. JAKSON ENGINEERS LTD INDIA
17. LEGRAND INDIA LTD INDIA
18. LOTUS POWERGEARPVT LTD INDIA
19. REUNION ELECTRICAL MANUFACTURERS (P) LTD
INDIA
20. SHIVALIC POWER CONTROL (P) LTD. INDIA
21. STANDARD ELECTRICALS LIMITED INDIA
22. TRICOLITE ELECTRICAL INDUSTRIES PVT. LTD.
INDIA
23. TRIDENT SWITCHGEARS PVT. LTD. INDIA
24. VENUS CONTROLS & SWITCHGEAR (P) LTD.
INDIA
MINIATURE CIRCUIT BREAKERS (MCB)
1. INDO ASIAN FUSEGEAR LTD INDIA
2. LEGRAND INDIA LTD INDIA
2 D. WREN & CO. INDIA
3 GAYATRI INDUSTRIES INDIA
4 GAYATRI INDUSTRIAL CORPORATION (UPTO 8” ID) INDIA
5 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA
6 PADMINI INDUSTRIES LIMITED INDIA
7 PYROTEK INDUSTRIES (INDIA) PVT. LTD. INDIA
8 SENIOR INDIA PVT. LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 29 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3. S & S POWER SWITCHGEAR LTD INDIA
4. STANDARD ELECTRICALS LIMITED INDIA
5. SIEMENS INDIA
6. ABB INDIA
7. SCHNEIDER ELECTRIC INDIA
ELCB 1. GE POWER CONTROLS INDIA PVT. LTD. INDIA 2. HAVELLS INDIA LTD. INDIA
3. INDO ASIAN FUSEGEAR LTD INDIA
4. LEGRAND INDIA LTD INDIA
5. S & S POWER SWITCHGEAR LTD INDIA
6. SIEMENS LTD. INDIA
7. STANDARD ELECTRICALS LIMITED INDIA
8. ABB INDIA 9. SCHNEIDER ELECTRIC INDIA
LOW VOLTAGE INDUSTRIAL SWITCHES/ISOLATORS 1. ASEA BROWN BOVERI LTD. INDIA 2. GE POWER CONTROLS INDIA PVT. LTD. INDIA 3. HAVELLS INDIA LTD. INDIA 4. KAYCEE INDUSTRIES LTD INDIA 5. LARSEN & TOUBRO
2. JEUMONTINDUSTRIE FRANCE 3. FUJI ELECTRIC SYSTEMS CO. LTD JAPAN 4. MITSUBISHI CORPORATION JAPAN
5. TOSHIBA CORPORATION JAPAN
6. TOSHIBA MITSUBISHI ELECTRIC INDUSTRIAL SYSTEMS CORPORATION (EXCLUDING FLAME-PROOF MOTORS OF FRAME SIZE MORE THAN 900)
JAPAN
7. PEEBLES ELECTRICAL MACHINES UK 8. SIEMENS INDIA / GERMANY 9. ABB FINLAND/SWITZERLAND/
INDIA
INDUCTION MOTORS – LV (415 V) ( SAFE AREA) 1. ASEA BROWN BOVERI LTD INDIA
2. BHEL (ELECTRICAL MACHINES DIVISION) INDIA
3. CROMPTON GREAVES LTD INDIA
4. KIRLOSKAR ELECTRIC COMPANY LTD INDIA
5. SIEMENS LTD INDIA / GERMANY 6. SIEMENS AG, GERMANY GERMANY 7. ANSALDOROBICON ITALY 8. FUJI ELECTRIC SYSTEMS CO. LTD. JAPAN 9. TOSHIBA CORPORATION JAPAN
10. ASEA BROWN BOVERI INDIA /SWEDEN 11. GENERAL ELECTRIC CO. USA
INDUSTRIAL TYPE SW. SOCKET & PLUG 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA
2. CHLORIDE POWER SYSTEMS AND SOLUTIONS LTD. (FORMERLY CALDYNE)
INDIA
3. CROMPTON GREAVES LTD INDIA
4. CYCLO ELECTRIC DEVICES & SERVICES CO.
INDIA
5. EX-PROTECTA INDIA
6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME
INDIA
7. FCG POWER INDUSTRIES LTD INDIA
8. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA
9. LEGRAND INDIA LTD INDIA 10. LEGRAND S.A. FRANCE 11. BBC-BROWN BOVERI&CIE AG GERMANY
3. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
4. KEI INDUSTRIES LIMITED (UPTO 33 KV) INDIA
5. NICCO CORPORATION LTD INDIA
6. RAVIN CABLES LIMITED INDIA
7. TORRENT CABLES LTD. INDIA
8. UNIVERSAL CABLES LTD. INDIA
9. UNIFLEX INDIA LT POWER CABLES
1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD INDIA 3. DELTON CABLES LTD INDIA 4. FINOLEX CABLES LTD INDIA 5. INDUSTRIAL CABLES (I) LIMITED (1.1 KV PVC/XLPE
INSULATED) INDIA
6. J K CABLES LIMITED INDIA
7. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
8. KEI INDUSTRIES LIMITED INDIA
9. NICCO CORPORATION LTD INDIA
10. PLAZA CABLE INDUSTRIES LIMITED INDIA
11. RAVIN CABLES LIMITED INDIA
12. TORRENT CABLES LTD INDIA
13. UNIVERSAL CABLES LTD. INDIA
14. POLYCAB INDIA LT CONTROL CABLES (1.1 KV)
1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 32 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
3. DELTON CABLES LTD INDIA
4. FINOLEX CABLES LTD INDIA
5. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED
INDIA
6. KEI INDUSTRIES LIMITED INDIA
7. NICCO CORPORATION LTD INDIA 8. PLAZA CABLE INDUSTRIES LIMITED INDIA
9. RADIANT CABLES PVT. LIMITED INDIA 10. RAVIN CABLES LIMITED INDIA 11. TORRENT CABLES LTD. INDIA
12. UNIVERSAL CABLES LTD. INDIA 13. MIRACLE CABLES INDIA 14. POLYCAB INDIA
CABLES FOR EARTHING 1. ADVANCE CABLE TECHNOLOGIES (P) LTD. INDIA 2. DELTON CABLES LTD INDIA
3. FINOLEX CABLES LTD INDIA
4. GUPTA ELECTRIC & MACHINERY STORES (GEMSCAB)
INDIA
5. J K CABLES LIMITED INDIA
6. NETCO CABLE INDUSTRIES (PVT.) LTD. INDIA
7. NICCO CORPORATION LTD INDIA
8. PRESTIGE CABLE INDUSTRIES INDIA
9. SHYAM CABLES INDUSTRIES INDIA
10. SPECIAL CABLES PVT. LTD. INDIA
11. T C COMMUNICATION PVT LTD INDIA
12. UNIVERSAL CABLES LTD. INDIA
CABLE JOINTING KITS
1. RAYCHEM RPG LTD. INDIA
PRE-FABRICATED AL-CABLE TRAYS
1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. HINDUSTAN VIDYUT PRODUCTS INDIA 3. INDIANA ENGG WORKS PVT LTD INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. JAMNA METAL COMPANY INDIA 6. KANADEANANDUDYOG PVT. LTD. INDIA 7. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA
8. METALITE INDUSTRIES INDIA
9. PAREKH ENGINEERING COMPANY INDIA
10. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.
INDIA
11. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 33 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
12. SADHANA ENGINEERING CORPORATION INDIA
13. SREEATREYA ENTERPRISES INDIA
14. STEALITEENGG CO INDIA
PRE-FABRICATED G.I. CABLE TRAYS
1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. INDIANA ENGG WORKS PVT LTD INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAMNA METAL COMPANY INDIA 5. KANADEANANDUDYOG PVT. LTD. INDIA 6. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA
7. METALITE INDUSTRIES INDIA
8. PAREKH ENGINEERING COMPANY INDIA
9. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.
INDIA
10. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
11. SADHANA ENGINEERING CORPORATION INDIA
12. SLOTCO STEEL PRODUCTS PVT. LTD.
13. SREEATREYA ENTERPRISES INDIA
14. STEALITEENGG CO INDIA
HOSE PROOF LOCAL CONTROL STATION 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA
3. C & S ELECTRIC LTD. INDIA
4. EX-PROTECTA
5. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME)
INDIA
6. FCG POWER INDUSTRIES LTD. INDIA 7. FLAMEPROOF EQUIPMENTS PVT. LIMITED INDIA 8. HOTLINE SWITCHGEAR & CONTROLS INDIA
9. POWER ENGG CO INDIA
HOSE PROOF JUNCTION BOXES
FRP CABLE TRAYS 1. ENERCON INDIA 2. ERCON COMPOSITES (UPTO 600 MM WIDE) INDIA 3. KEMROCK INDIA 4. SATYAM INDUSTRIES INDIA 5. SINTEX INDUSTRIES LTD. INDIA 6. SUMIP COMPOSITES PVT LTD. INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 34 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA 3. EX-PROTECTA INDIA 4. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.
(FORMERLY CEAG FLAME) INDIA
5. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA 6. FCG POWER INDUSTRIES LTD INDIA
EARTHING & LIGHTNING PROTECTION MATERIAL – (AL) WIRE/STRIP
1. ANAND ELECTRIC TRADING CO. INDIA 2. C & S ELECTRIC LTD. INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAYANT METAL MFG. CO. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.
LTD. INDIA
6. JAMNA METAL COMPANY INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA
8. METROPOLITAN INDUSTRIES INDIA
9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA
EARTHING & LIGHTNING PROTECTION MATERIAL – (GI) WIRE/STRIP
1. ANAND ELECTRIC TRADING CO. INDIA 2. CONTROLS & SWITCHGEAR CO. LTD. INDIA 3. JAYANT METAL MFG. CO. INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.
LTD. INDIA
6. JAMNA METAL CO. INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA
8. METROPOLITAN INDUSTRIES INDIA
9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA
10. BHARTI EXPORTS INDIA
11. METALITE INDUSTRIES INDIA
12. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
13. SADHANA ENGINEERING CORPORATION INDIA
14. STEALITEENGG CO INDIA
GI PIPES & CONDUITS
1. BHARTI EXPORTS INDIA
2. INDIAN TUBE CO. (TATA DIV. OF TUBES & PIPES) INDIA
3. JINDAL PIPES LTD. INDIA
4. MEGHJYOT ENTERPRISES INDIA
5. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA
6. STEELCRAFT INDIA
CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,
PUMP HOUSE AND SERVICES
TALCHER FERTILIZERS LIMITED
VENDOR LIST
PNPM/PC150/E/112/SEC-10.0
0
DOCUMENT NO REV
SHEET 35 OF 35
FORM NO: 02-0000-0021 F2 REV2 All rights reserved
INDUSTRIAL CABLE GLAND 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. COMET BRASS PRODUCTS INDIA 3. COMET INDUSTRIES INDIA 4. DOWELL'S ELECTRICALS INDIA 5. ELECTROMAC INDUSTRIES INDIA 6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.
(FORMERLY CEAG FLAME INDIA
7. GLAND-MECH. INDUSTRIES INDIA 8. INDUSTRIAL PRODUCTS EQUIPMENT INDIA 9. POWER ENGG CO INDIA 10. QUALITY & PRECISION INDL. EQUIPMENT INDIA 11. S J METAL INDUSTRIES (JAINSON) INDIA
CABLE LUGS
1. DOWELL'S ELECTRICALS INDIA 2. FORWARD ENGG INDUSTRIES INDIA 3. KSE ELECTRICAL PVT. LTD. INDIA 4. MG ELECTRICA INDAI 5. POWER ENGG CO INDIA 6. S J METAL INDUSTRIES (JAINSON) INDIA 7. USHA MARTIN INDUSTRIES LTD. (ISMALDIVN) INDIA
Rev.
SCHEDULE OF RATES (SOR)
1
PNPM/PC‐
150/E/112/NCB/
SEC‐VII
Document No.
FOR MECHANICAL WORKS (SUPPLY & ERECTION)
FOR
CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES
SCHEDULE OF RATES FOR MECHANICAL WORKS (SUPPLY & ERECTION)
For Issuance For Issuance
Issued for review & Comment
AT
TALCHER FERTILIZERS LTD., ANGUL ODISHA
10P
REV
JKYDILIPDILIP
CHECKED BYPREPARED BY APPROVED BY
GCGC
GC
DESCRIPTION
16.12.1914.03.19
JKYDILIPDILIP
RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES
26.02.19
DATE
FORM NO: 02‐0000‐0021F2 REV1 SHEET 1 of 1 All Rights Reserved
S. No. GENERAL INSTRUCTIONS TO BIDDER1 The Schedule of Rates is to be read in conjunction with Technical Specification for Electrical System for Construction of Raw Water Reservoir
and Allied Services & its attachments and other relevant sections / sub sections of NIT.
2 The rates shall be applicable for all floors, heights and depths.3
This being an item rate contract, the unit rate shall prevail, correction of errors (if any) shall be done as per clause no. 30 Section III of ITB.
4 Owner/Consultant reserves the right to interpolate or extrapolate the rate for any item, which is not covered in the Schedule of rates, from the rates available for similar item / work in the Schedule of Rates.
5 Whenever it is mentioned in the specifications that the bidder shall perform certain work or provide certain facilities/materials or certain item or activity is in bidder’s scope of services it is understood that the bidder shall do so at his cost within the item rates unless expressly stated otherwise.
6 Unit rates for erection shall inclusive of Unloading from Truck/ Trailer, transportation from store (at site), handling, the cost of labour, supervision, all consumables, cost towards providing erection materials & hardware, necessary tools and tackles, and providing all the required facilities for execution and inspection, testing and commissioning, guarantees etc. Minor repair and touch painting work towards providing all required facilities for execution shall be in bidder’s scope.
7 Work shall involve, at every stage, correct identification of all equipment including loose equipment from stores, identifying spare items/ excess items, listing the same and carefully storing them under the custody of the contractor. Information to this extent shall be passed on to the concerned Owner’s Engineer-in-charge / owner. Certification of balance items after erection and return to the Owner’s Engineer in-charge so assigned.
8 All equipment shall be deemed to have clear tags, descriptive letter writing indicating locations / sources (from - to), cable sizes, circuit no., unit no., and any other writing required to make installation completely informative. All costs in view of above shall be deemed to have been included in installation/ commissioning.
9 All primary & secondary injection tests & testing of relays and other equipment as per relevant IS, code of practice for testing and commissioning shall be deemed to have been included for testing & commissioning. No extra charges shall be provided for that. Testing of motors, including re-greasing, and at least 4 hour run shall be included in the motor testing & commissioning.
10 This being a grass root job, the Contractor must visit TFL, Talcher site to assess the quantum and nature of work before quoting. However, the Contractor shall inform PDIL / TFL, 1 week prior to their visit.
11 Quantities mentioned in the Schedule of Rates are indicative and not exhaustive in nature. Payment shall be made as per actual quantity used/certified at site by Owner’s Engineer-in-charge.
12Contractor shall indicate the prices of all electrical items as per attached documents. The quantities indicated in Schedule of Rates are estimated quantities and may change during detailed engineering as per site condition. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers clause no. 60.2 of GCC.
PREAMBLE TO SCHEDULE OF RATES FOR RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TFL TALCHER
13 The Tenderers shall note that the quantities of the different Items, as given in the "Schedule of Rates" are tentative based on tentative tender drawings and are subject to variation and they shall not be entitled to claim any higher rate or compensation on this account. Owner / Consultant reserve the right to change / modify the size and type of sections at any time. Owner / Consultant do not guarantee work under each item of the Schedule of Quantities. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers relevant clause of GCC.
14 Un-priced Price Schedule indicating the word “Quoted” (with prices blanked out) against each item shall be attached with bid documents for
15 Owner reserve their right to execute any additional works / extra works, during the execution of Work, either by themselves or by appointing any other agency, even though such works are incidental to and necessary for the completion of works awarded to the Contractor. In the event of such decisions taken by Owner, Contractor is required to extend necessary cooperation, and act as per the instructions of Engineer-in-Charge.
16 Before procurement of any equipment / material, the Contractor shall submit drawing / document, Compliance Statement supported by
17 Quoted rates shall also cover the cost towards fabrication of steel structure, its painting with two coats of epoxy paint, after surface
18 All GI materials shall have zinc coating of 610 gm/Sq.m at any point on its surface unless indicated otherwise in the schedule of rates. 19 The portion, which is under "HOLD" shown in the approved drawing (if any) or the portion, which would be brought under "HOLD" during
20 Quoted rates shall remain firm till completion of work including all extensions granted for any reasons whatsoever.21 All heavy machinery including Cranes, Hydra, etc for the job (if required) shall be in the bidder’s scope.22 Bidders are required to undertake all the safety precautions as deemed fit and necessary by statutory authorities and/or
23The plans have been evolved tentatively based on information available with Owner / Consultant but the dimensions and details etc. are liable to changes. The Tenderers shall not be entitled to claim any higher rate or compensation on this account. The tender drawings are intended mainly to give an indication of the probable type of construction. The successful Tenderers will, however, be required to execute the work as per detailed approved drawings issued to them from time to time. Steel structures can be changed to R.C.C. or vice versa. Owner reserves the right to add / delete any of the building works mentioned in the N.I.T., during the currency of the contract..
24 The Tenderers shall be fully responsible for the correct setting out and execution of the work in accordance with approved drawings which will be supplied to them progressively. All tools, tackles, construction equipments etc., required for the successful execution / construction of the complete work shall be responsibility of the Tenderers.
25Quantities indicated in Schedule of Rates are approximate and subject to variation on either side. The quantity of individual item may be deleted. Contractor shall not be entitled for any compensation on this account and the quoted rates shall hold good for such quantity variationsetc. Payments on bills shall, however, be made on actual measurements of quantities of work done as per approved drawings. Unless otherwise specified, measurements of civil quantities shall be taken as per Indian Standards IS: 1200.
26 The rates to be inserted in the "Schedule of Rates" are to be inclusive of the value of the work described under several items including all costs and expenses which may be required for the construction of the work described together with all taxes, general risks, liabilities and obligations such as temporary buildings / hutments, fencing, watching, lighting, insurance, labour regulations, indemnity, maintenance and the like. The prices shall be inclusive of all labours, materials, tools, plants, equipment, hoists, tackles, scaffoldings, the sundries, etc., as may be necessary for the completion of the work in all respects.
27 Any fabrication / construction done before final approval of the drawings shall be the Contractor's responsibility.
28No work shall be undertaken at site until detailed approved drawings have been issued by the Owner / Consultant in writing. Subsequent revision in the drawings which become necessary shall be incorporated and revised drawings issued to the Contractor who shall execute the work as per the latest revised drawings. Nothing extra will be paid on this account and no claim whatsoever will be entertained on this account. The Owner / Consultant reserves to themselves the right to modify / revise / alter etc. in any drawing supplied to the Contractor.
29In case of any discrepancy between the description of items given in the "Schedule of Rates" and Specifications, drawings and other documents, the decision of the Owner / Consultant in writing shall be final, binding and conclusive for the purpose of this contract.
30 The term "Design and drawings" mentioned in the description of Items in the "Schedule of Rates" means the detailed approved design drawings marked "Good for Construction".
31 The work "As described", "As shown", "As directed" or "As approved", "As mentioned" in the description of Items shall mean as directed in design or detailed drawings and as directed by the Engineer-in-Charge.
1
2
3
4
5
6
7
Bidder
Name :
1
i MT 25 INR 0.00 No Rupees Only
2
Tender Inviting Authority : PDIL on behalf of Talcher Fertilizers Ltd.
Stactic / Moving machineries
SUPPLY & ERECTION OF NEW EQUIPMENTS & MACHINERIES ETC.
PART ‐A
Notes :
NIT Ref. : PNPM/PC‐150/E/112/NCB
The order will be placed on overall lowest (L‐1) basis.
Quoted
CurrencyUNITS
Unloading from trailer, truck, etc. and placing on firm ground over suitable support / sleepers
etc. as desired by Owner/Consultant at a place to be decided by Owner/Consultant of
equipment foundations. However, effort shall be made to erect the equipment directly from
tailor to foundation to avoid unloading for which payment shall not be made against
unloading of equipment.
UNLOADING OF EQUIPMENT
BASIC UNIT PRICE In
Figures To be entered by
the Bidder
(Including all taxes,
duties, levies, etc, except
GST )
TOTAL AMOUNT in
Figures
(Including all taxes,
duties, levies, etc, except
GST )
S.No DESCRIPTIONAPPROX
QTY.
SCHEDULE OF RATES FOR EQUIPMENTS AND PIPING WORKS
Prices shall be quoted strictly as per the Price Schedule Format made available herein without altering any of the contents of the "Price Schedule Format".
Vendor shall include Prices towards all Mandatory & Commissioning Spares, Special Tools & Tackles, Export Sea‐worthy Packing, Forwarding, FOB Charges, Inland Freight, Testing & Third
Party Inspection Charges, Insurance upto Port of Exit, Loading (on ship), all duties and Taxes, other charges payable outside India including Export Licensing etc. Supplier shall be responsible
and no additional cost/ time shall be paid in case commissisonig spares/ special tools & tackles over and above those quoted by supplier are required.
PRICE SCHEDULE
(This BOQ Template must not be modified/ replaced by the Bidder and the same should be uploaded after filling the relevant columns, else the Bidder is liable to be rejected for this Tender. Bidders are allowed to enter the
Bidder Name and Numeric Values only)
Name of Work : CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TALCHER FERTILIZERS LTD., ANGUL, ODISHA
TOTAL AMOUNT in Words
(Including all taxes, duties, levies, etc, except
GST )
Per diem rates as quoted by the Bidder, shall be basis for payment in case assistance is required during commissioning however actual payment for service shall be based on actual mandays
consumed at site.
Please submit Unpriced copy of this Price Schedule indicating either "QUOTED" or "NOT QUOTED" against each item.
Please enter Value in Cells Highlighted in Yellow only.
Price to be entered in Indian Rupees Only
FORM NO: 02‐0000‐0021F2 REV1 SHEET 1 of 30 All Rights Reserved
i Nos 3 INR 0.00 No Rupees Only
ii No. 1 INR 0.00 No Rupees Only
3
Lot 1 INR 0.00 No Rupees Only
Complete works of supply & Erection of Pumps, Motors, Machineries, flanges, fittings,
transportation and inspection charges but not limited to, the following items in accordance
with PMS (piping material specification), relevant specifications & drawings indicated in
Technical specification under this tender documents and instructions of Engineer‐in‐charge
and as per all provisions of the CONTRACT.Transportation of Equipments/SKID etc. from
Owner/ Consultant’s stores/storage yard; dismantling & reassembly / reinstatement of
structures, building sheets (if required) etc., to facilitate for erection, assembly of parts / sub‐
assemblies; checking, cleaning, chipping and preparing the top of foundation and cleaning of
pockets for erection; placing the equipments, machinery & SKID etc., on foundation or
structure;
Rates shall include cost of labour, deployment of tools & tackles, consumables, Materials and
other associated arrangements required to execute all activities. Grouting shall be paid as per
Cl. 2.0 of SOR when using SHRINKOMP or equivalent. For cost of grouting using ordinary
grouting, including supply of materials shall be included in the unit rates of erection of
equipments, machinery & SKID etc. without any extra cost to Owner.
MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR Water supply to Raw Water
Reservoir AS PER TS IN NIT
MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR for makeup water supply to
Fire water reservoir AS PER TS IN NIT
SUPPLY & ERECTION OF EOT CRANE
Supply & Erection of EOT Crane (Double girder) of Suitable capacity including its drives and
all other relevant electrical items as per TS attached elswhere in the tender documents.This
covers the technical requirements of design, engineering,manufacture, testing at works,
supply at site, erection, site testing and commissioning of the complete electrical equipment
and accessories as required for the overhead travelling crane and hoists.
leveling, alignment, bolting, welding, grouting; fixing of internals; first maintenance &
carrying out testing / carrying out alignment, trial runs and start up runs and providing
manpower for testing, rectifying and defect and completion of works in all respects including
earthing protection by way of fixing strips and electrodes as per drawings & specifications.;
completion of all jobs as per drawings, scope of work & technical conditions as defined in the
enquiry specifications, standards, codes and all jobs are to be carried out as per the
instruction and to the full satisfaction of the Engineer‐in‐Charge/Owner. Job also includes
supplying of all types of tools, tackles, lifting arrangements, tractor trolley & equipments,
machineries all consumables and labour to complete the job in a workman like manner,
erection and removal of steel scaffolding wherever required, area preparation for hot job
and area cleaning after completion of work including blinding, deblinding, removal of
insulation, gas cutting of bolts, chipping of foundation, flushing wherever required.
FORM NO: 02‐0000‐0021F2 REV1 SHEET 2 of 30 All Rights Reserved
4
i M3 2 INR 0.00 No Rupees Only
5
5.1
i MTR. 192 INR 0.00 No Rupees Only
ii MTR. 264 INR 0.00 No Rupees Only
iii MTR. 114 INR 0.00 No Rupees Only
5.2
20",OD 762
36",OD 914
ASME B36.10
ASME B36.10
ASME B36.10
VALVE
GATE VALVE
Arrangement of all additional lands required for Contractor's storage, fabrication, access for
construction, etc. procurement and supply of all materials, consumables, equipment, labour
and other inputs, carrying out all temporary, ancillary, auxiliary works, etc. make ready for
commissioning of pipeline as per drawings, specifications, other provisions of Contract
document and instructions of Engineer‐in‐charge, including but not limited to carrying out
the following works.
Barricading the pipeline construction area prior to execution to the entire satisfaction of
Owner / Engineer‐in‐charge.
SHRINKOMP‐20 Or Conbextra GP‐2
ITEM SIZE SPECN SCH/THK MATERIAL
SCH 10
SCH 10
Pipes
SCH XS
ERW,API 5L GR.B
ERW,API 5L GR.B ,C & W
ERW/SAW,ASTM API 5L
GR.B
CS PIPES BE
CS PIPES BE
CS PIPES BE
20",OD 508.0
GROUTING
Grouting works include supply of materials, manpower, and necessary arrangement for
application of grouting as per technical specification, vendor’s requirement and instruction of
Owner/Consultant. Machineries with ≥500 H.P., Araldite of M/s CIBA Geigy or equivalent
shall be used. For tall towers having height more than 10 Meter and weight more than 25
MT, SHRINKOM ‐ 20 or Conbextra GP‐2 shall be used. However, for balance equipments /
machineries and structurals ordinary 1:1:2 cement grout mix added with anti‐shrinkage
compound shall be used without any extra cost to Owner.
Carrying out inspection of materials including line pipes at the time of laying/ installation of
line pipes, associated valves, tees, insulating joints, flanges & fittings for buried application of
all sizes, thickness & ANSI class rating and accessories as per specification wherever required
depending on site condition.
SUPPLY OF PIPING ITEMS
FOR U/G PIPING
"Supply , taking over" as defined in the specifications, handling, loading, transportation,
unloading and Laying of bare/coated line pipes and other materials like valve, fittings,
flanges, from Contractors suppliers locations/works etc. to Contractor's stock
yard/workshop/work‐site including preliminary activities, preparation of drawings, wherever
required for crossing etc. Handling, stacking, stringing of the UG pipes ,
FORM NO: 02‐0000‐0021F2 REV1 SHEET 3 of 30 All Rights Reserved
i Nos 5 INR 0.00 No Rupees Only
ii Nos 19 INR 0.00 No Rupees Only
iii Nos 11 INR 0.00 No Rupees Only
iv Nos 4 INR 0.00 No Rupees Only
5.3
i Nos 4 INR 0.00 No Rupees Only
5.4
i Nos 4 INR 0.00 No Rupees Only
ii Nos 33 INR 0.00 No Rupees Only
iii Nos 13 INR 0.00 No Rupees Only
5.5
i Nos 12 INR 0.00 No Rupees Only
ii Nos 60 INR 0.00 No Rupees Only
iii Nos 39 INR 0.00 No Rupees Only
5.6
i Nos 90 INR 0.00 No Rupees Only
36”ASME B16.47
SR.B
150 #
150 #,SCHXS
GASKET (SPRL‐
WND RF)
GASKET(SPRL‐WND
RF)
20”
36”
ITEM SIZE SPECN SCH/THK MATERIAL
GASKET (SPRL‐
WND RF)18” ASME B16.20 150#
ASTM A105,WN‐RF 125
AARH
ITEM SIZE SPECN SCH/THK MATERIAL
FLANGE(WELD
NECK)
GASKET
36” GAV210 150#
CS BODY ASTM A216 GR
WCB
FLANGES
ITEM SIZE SPECN
150#CHECK VALVE
(FLNG)20" CHV210
MATERIAL ITEM SIZE SPECN
CS BODY ASTM A216 GR
WCB
CHECK VALVE
STUD & NUTS
ITEM SIZE SPECN SCH/THK MATERIAL
ASTM A193 GR.B7/ASTM
A194 GR.2H
150#
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
ASME B16.20
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
ASTM A105, SO‐RF 125
AARH
ASTM A105, SO‐RF 125
AARH
SCH/THK
TP304 SS WDG;GPH
FLR;TP304 SS INR RNG;CS
OTR RNG
STUD & 2NUTS
HVY HEX11/8" 150
ASME
B16.20/B16.4
7 SR.B
150#
18” ASME B16.5 150 #
GATE VALVE(FLNG)
GATE VALVE(FLNG) 20” GAV210 150#CS BODY ASTM A216 GR
WCB
FLANGE
(SLIP ON)
CS BODY ASTM A105,
SOCW
GAV201 800#
SCH/THK
CS BODY ASTM A105GATE VALVE
(SOCW)1/2”
GATE VALVE
(SOCW)3/4” GAV201 800#
20” ASME B16.5
FLANGE
(SLIP ON)
MATERIAL
FORM NO: 02‐0000‐0021F2 REV1 SHEET 4 of 30 All Rights Reserved
ii Nos 560 INR 0.00 No Rupees Only
iii Nos 582 INR 0.00 No Rupees Only
5.7
i Nos 37 INR 0.00 No Rupees Only
ii Nos 10 INR 0.00 No Rupees Only
5.8
i Nos 4 INR 0.00 No Rupees Only
ii Nos 2 INR 0.00 No Rupees Only
5.9
i Nos 4 INR 0.00 No Rupees Only
5.10
i Nos 10 INR 0.00 No Rupees Only
ii Nos 4 INR 0.00 No Rupees Only
5.11
i No. 1 INR 0.00 No Rupees Only
ii No. 1 INR 0.00 No Rupees Only
iii Nos 2 INR 0.00 No Rupees Only
5.12
i No. 5 INR 0.00 No Rupees Only
ii No. 18 INR 0.00 No Rupees Only
ASTM A234 WPB‐WLDD
ASTM A193 GR.B7/ASTM
A194 GR.2H
3000#
SOCKOLET
ASTM A234 WPB‐WLDD,
BW
ITEM SIZE
TEE (BW) 36X36
ASTM A234 WPB‐WLDD
SCH/THK MATERIAL
ITEM SIZE SPECN SCH/THK MATERIAL
ELBOW
ELBOW 900, 1.5D 36”BW ASME B16.9 SCH XS
275ASTM A193 GR.B7/ASTM
A194 GR.2H
11/8" 160
20”BW ASME B16.9 SCH 10
STUD & 2NUTS
HVY HEX
STUD & 2NUTS
HVY HEX11/2"
MSS SP 97
ASTM A234 WPB‐WLDD
SOCKOLET
(SOCW)
TEE
ELBOW 900, 1.5D
SCH/THK
ASTM A105
ASTM A105
ASTM A105
ASME B16.9 SCH XS X
SCH XS
TEE (BW) 20X20 ASME B16.9 SCH10 X
SCH10
REDUCER ECC.(BW) 20"X18" ASME B16.9SCH10X SCH
10,
150#,RF 125
AARH
SPECN SCH/THK MATERIAL
SPECL BLIND
FLANGE
ASTM A234 WPB‐WLDD,
BW
ITEM SIZE SPECN
ITEM SIZE SPECN SCH/THK
REDUCER
ITEM SIZE SPECN MATERIAL
MATERIAL
ASTM A105
SOCKOLET
(SOCW)36"X3/4” 3000# ASTM A105
20"X3/4” MSS SP 97
ITEM SIZE SPECN SCH/THK MATERIAL
BLIND FLANGE 36”ASME B16.47
SR.B
150#,RF 125
AARH
BLIND FLANGE 40”ASME B16.47
SR.B
150#,RF 125
AARH
CAP(CS)
20” ASME B16.48
BLIND FLANGE
CAP, THD 1/2" ASME B16.11 3000# ASTM A105
CAP, THD 3/4" ASME B16.11 3000# ASTM A105
FORM NO: 02‐0000‐0021F2 REV1 SHEET 5 of 30 All Rights Reserved
5.13
i Nos 9 INR 0.00 No Rupees Only
ii Nos 9 INR 0.00 No Rupees Only
iii Nos 15 INR 0.00 No Rupees Only
iv Nos 20 INR 0.00 No Rupees Only
5.14
i Nos 6 INR 0.00 No Rupees Only
6.0
6.1
ASME B36.10 SCH160
NIPPLE, PLN‐PLN 3/4" ASME B36.10 SCH160
SCH/THK MATERIAL
SMLS,API 5L GR.B
SMLS,API 5L GR.B
SMLS,API 5L GR.B
SMLS,API 5L GR.B
BRANCH WELD WITH RP
ITEM SIZE SPECN SCH/THK MATERIAL
NIPPLE, PLN‐THD,
NPT1/2" ASME B36.10 SCH160
NIPPLE, PLN‐PLN 1/2" ASME B36.10 SCH160
ITEM SIZE SPECN
NIPPLE, PLN‐THD,
NPT
CARBON STEEL BW
FABRICATION & ERECTION OF ABOVE GROUND (A‐G) PIPING
Transportation of all piping materials from storage point to work site/shop including from
shop to work site, cleaning, stacking, surface preparation/shot blasting of piping, supply &
application of paints and primers (including all coats‐primer, intermediate & final coats) for
piping and equipments as per enclosed painting specification in NIT,prefabrication /
fabrication at shop and/or site including marking, cutting, edge preparation, beveling,