NUCLEAR POWER CORPORATION OF INDIA LIMITED (A Government of India Enterprise) CONTRACTS AND MATERIAL MANAGEMENT WINGRAWATBHATA, RAJASTHAN SITE TENDER DOCUMENT SECTION-A INVITATION TO TENDER AND TENDERING CONDITIONS SECTION -B CONDITIONS OF CONTRACT SECTION -C TECHNICAL SPECIFICATIONS OF STORES SECTION -D FORMAT FOR SUBMISSION OF BID To (Through On-line Mode)
21
Embed
SECTION-A INVITATION TO TENDER AND TENDERING … · NUCLEAR POWER CORPORATION OF INDIA LIMITED SECTION-A INVITATION TO TENDER AND TENDERING CONDITIONS FOR SUPPLY OF INDIGENOUS STORES
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NUCLEAR POWER CORPORATION OF INDIA LIMITED
(A Government of India Enterprise)
CONTRACTS AND MATERIAL MANAGEMENT WINGRAWATBHATA, RAJASTHAN SITE
SUB: Spare Low range Pressure Calibrator as as per attached Specifications
For and on behalf of Nuclear Power Corporation of India Ltd., Head (Contracts & Material Management), Rajasthan Rawatbhata Site, invites bids for the supply of Stores detailed in the Form No. CMM-22A/Rev.5. Any contract against this tender will be governed by General Conditions of Contract contained in form No. CMM-22/Rev.5 and *Special Commercial Terms and Conditions annexed herewith. If you are in a position to quote for the supply in accordance with the requirement stated in the attached online form, please submit your bid in the online tender form CMM-22A/Rev.5. Your bid must be submitted in on-line bidding forms at http://npcil.etenders.in only on or before the due date and time mentioned above. Yours faithfully, Sd/-
( Umesh Shah) Senior Manager (Contracts)
For and on behalf of Nuclear Power Corpn.Of India Ltd. (The Purchaser)
Head(C&MM), RR Site, on behalf of Nuclear Power Corporation of India Limited (NPCIL) invites online (e-Tender) in Single Parton e-tendering Portal of NPCIL as per the details given below:
1.1 Tender No. & Description
: RRSite/Stations/Unit-5&6/CMM/ECON/74489
For Supply of as per tender documents.
1.2 Tender Fee in Indian Rupees
(Non-refundable)
: NIL
1.3 Last Date & time for downloading
of tender document
: As per Tender
1.4 Due Date & Time for online
submission of e-Tender
: As per Tender
1.5 Date & Time for opening of e-
Tender
: As per Tender
Qualifying Requirements: The bidder shall meet all the requirements mentioned below failing which his offer will be summarily rejected. (As per Appendix-X)
(a) Any offers not complying with the features specified in the tender specifications are liable for rejection.
(c) Prospective bidders if not already registered in our above website, are required to register online on NPCIL e-Tendering Portal alongwith requisite digital signature to participate in above E-Tender.
(d) NPCIL reserves the right to accept / reject any or all bids in part / full without assigning any reason.
(e) If the due date for opening of Tender happens to be a holiday in NPCIL, the same will be carried out on the next working day at the same time.
For query, if any, please contact DGM , C&MM, Vijay ParamanuBhawan, Ground Floor, RR Site, Anushakti, Rajasthan- 323303, Phone:- (01475)-242071/242018/242159
INDENT NO : 74489 Schedule to Tender No. RR Site/Stations/Unit-5&6/CMM/ECON/74489 Date :
Fax : 01475-242158
Due on date................ AS PER TENDER . Ph. : 01475-242018, 242071, 242128
S NO.
Description Qty. Unit of Measurement
Unit Price (DAP
Rawatbhata Rajasthan Site) (In
Rs.)
GST Rate on DAP Site Price in
Percentage
Total Price Including
GST (in Rs.)
HSN No. / SA No.
1 Spare Low range Pressure Calibrator as as per attached Specifications in Annexure-1 Note: Bidder shall submit compliance sheet along with the offer.
1.00 No. All items to be quoted in e-mode only
Other terms [Tick wherever applicable]
PRICES : DAP Rawatbhata Rajasthan Site [ ]
PAYMENT TERMS : As per GCC are acceptable. [ ]
Other, Please Specify:
Validity of offer: …………………… Delivery Period: ……………………
GST Registration No: ……………………
I / We have understood the terms and conditions of the contract as contained in form No. (GCC / Supply-1 / Rev-4)/(CMM-22 / Rev. 4) and have thoroughly examined the specification drawing and or pattern quoted or referred to herein and are fully aware of the nature of the stores required and my / our offer is to supply the stores strictly in accordance with the requirements under the subject tender.
Date : Stamp and Signature of Tenderer STATUS OF SIGNATORY
ANNEXUR-1
1.0 Low Range Pressure Calibrator
Range: -0.85 to 20 bar
Sr.
No. Parameter Description COMPLIANCE BY
BIDDER (YES/NO)
1. Ranges -0.85 0.25 to 20 5 Bar
2. Accuracy 0.025% FS or better
3. Resolution Minimum 5 Digits or more
4. Display Large Graphic Display or better
5. Pressure Units (minimum requirement)
Kg/cm2, Bar, PSI, mmH2O
6. Current loop Features
Current measuring range: 0 to 24 mA DC or more ,
with resolution of 0.001 mA.
7. Operating temperature 0 to 50 Deg C or more
8. Over Pressure Alarm Min. 120% FS (Audio / Visual)
9. Instrument Casing Portable and handy
10. Pressure generation Priming Pump & Fine Adjustment Vernier
11. Following Accessories are to be supplied with each Digital Pressure Calibrator:
a) Test Leads
Test Leads (Red & Black)- 01set, with each
calibrator
b) Spare Seals Kit One set with each calibrator
c) Set of Adaptors (NPT)
One set of adaptor with each calibrator along with
Hose having ¼ NPT M open end and required
fittings.
d) Battery
2 sets of Batteries ( 1 set means total batteries used
in one unit)
e) Calibration Certificate Calibration Certificate from NABL Accredited
Dear Sir, 1. I/We have read the ‘Invitation to Tender’, ‘Instructions to Tenderers’, ‘General
Conditions of Contracts in FORM NO. CMM-22/Rev.5’ and ** ‘Special Commercial Terms and Conditions’ as contained in the tender documents.
2. I/We have thoroughly examined the specification, drawing and/or pattern quoted or
referred to herein and/or fully aware of the nature of the stores required and my/our bid is to supply the stores strictly in accordance with the requirements under this tender.
3. I/We hereby agree to supply the stores, strictly adhering to the General Conditions of
the Contract in FORM NO. CMM-22/Rev.5 and **Special Commercial Terms and Conditions of the tender documents.
4. You will be at liberty to accept any one or more of the items of stores offered by us and I/We shall be bound to supply you the stores as may be specified in the purchase order/contract.
5. I/We hereby agree to keep the prices and our bid valid for your acceptance for a period of 90 (Ninety) days from the due date of this tender.
**Strike out whichever is not applicable. 6. **Deviations to technical specifications are detailed in Annexure-'A' to the tender
form and compliance proposed to General Conditions of the Contract in FORM NO. CMM-22/Rev.5 and Special Commercial Terms and Conditions of the tender documents are detailed in Annexure-'B' to the tender form.
7. I/We are also enclosing herewith all the leaflets/catalogues etc. pertaining to the
stores offered. 8. Details of the stores along with prices and the bid terms are enclosed under schedule
to this tender form. Yours faithfully, Stamp and Signature of the Tenderer **Strike out whichever is not applicable. Encl: Deviation to technical specifications-Annexure 'A' Compliance to General Conditions of Contract in FORM NO. CMM-22/Rev.5 and
Special Commercial Terms and Conditions - Annexure 'B’ Leaflets/Catalogue.
ANNEXURE A
The tenderer shall note that any deviation to Technical Specifications of our tender
may lead to disqualification of their bid. However tenderer may submit the details of
deviations.
Deviation to Technical Specification(If Any) Confirmation of Bidder(s) (Tick
against Yes or No)
Deviation to Technical Specification of Tender. YES NO
If Yes please Provide complete Details and attached the supporting documents.