This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Airsweep Installation & Maintenance Manual
Airsweep Models VA-06 • VA-12 • VA-51
SECTION FOUR
AIR RECEIVERS 30, 60, 80 Gallon ASME Air Receivers
Tank Options - Auto Drain, Check Valve, Particulate Filter
Pressure Relief Valve - Model SRV250
Ball Valves - 3/4", 1", 1.5", 2"
Regulators - R50R-08, R50R-12, 09R813/B
30 GALLON ASME VERTICAL AIR RECEIVER – J32202
DIMENSIONS
FIND NUMBER NPT SIZE F1 1/2” F2 1-1/2” F3 3/4" F4 1/4"
With reinforced ball-cone check and stainless steel springs, these valves offer exceptional resistance to chemicals and corrosion. Bronze construction is standard; stainless steel construction also available.
Set Pressure Tolerance: ±2 psig up to and including 70 psig, ±3% of set pressure greater than 70 psig. As required in paragraph UG-134(d)(1) of the ASME Boiler & Pressure Vessel Code Sec. VIII Div. 1.
Seat Leakage: Bubble Tight within 5 psig for set pressure 50 psig or less Bubble Tight within 10% for set pressure greater than 50 psig As required in paragraph 2.2.3 of API 527. 2.5 AQL sample testing or 100% testing.
Certifications: ASME Boiler & Pressure Vessel Code Section VIII Division 1 CSA B51-03 Boiler, Pressure, Vessel, and Pressure Piping Code
Steve
Typewritten Text
Steve
Typewritten Text
Page 49 of 76
Steve
Typewritten Text
Page 50 of 76
Steve
Typewritten Text
Page 51 of 76
Steve
Typewritten Text
Steve
Typewritten Text
Page 52 of 76
Steve
Typewritten Text
Steve
Typewritten Text
Steve
Typewritten Text
Page 53 of 76
BALL VALVE – MODEL LHBV – 75
• Pipe Size: 3/4" • End-To-End Length: 2-1/2” • Max Pressure: 1/4"- 2” 600psi @ 100˚F (Water, Oil, Inert Gas) • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes
- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.
2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes
- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.
2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes
- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.
2-1/2”- 4” 450psi @ 100˚F • Max Pressure for Steam: 150psi @ 366 ˚F • Temperature Range: -50˚ to +400˚F • Vacuum Rating: 29.9” Hg • Additional Specifications: NPT Female x Female • Lockable Lever: Yes
- Body is brass, ball is chrome-plated brass, and seats are PTFE. - Valves have unrestricted flow (full port). - Valves with up to 2” pipe size or tube size are UL and C-UL certified. - NPT – Female x female have flouroelsastomer seal. T-handle valves have PTFE seal. - All are CSA and CSA-US certified. Valves with up to 2” pipe size are FM approved. - Lockable valves can be padlocked (not included) with 9/32” diameter shackle.
Steve
Typewritten Text
Steve
Typewritten Text
Page 57 of 76
HIGH FLOW REGULATOR – NUMATICS R50 SERIES (R50R-08 / R50R-12)
• Diaphragm-operated regulator • T-handle standard • Standard output pressure 0-125 PSIG
FLOW RATINGS
Model Pipe Size SCFM* @ Reduced Pressure of
25 PSIG 60 PSIG 80 PSIG
R50R-08 1" 370 385 395
R50R-12 1-1/2" 370 385 395 *Flow rates based on 100 PSIG inlet and 25% PSID
SPECIFICATIONS
Temperature Range ˚F (˚C) 40-120 (4-46/9)
Max. Pressure PSIG (Bar) 300 (20.7)
1 & 1-1/2 Weight, lbs. (kg) 7.2 (3.3)
DIMENSIONS: Inches (mm)
SIZE A B C D
1" 8.81 (224.0)
4.56 (116.0)
1.94 (24.0)
7.88 (200.0)
1-1/2"
9.53 (242.0)
5.19 (132.0)
1.28 (33.0)
8.25 (210.0)
Steve
Typewritten Text
Steve
Typewritten Text
Page 58 of 76
Steve
Typewritten Text
Steve
Typewritten Text
Page 59 of 76
Thank you for your interest in our Airsweep Systems® line of products.
Please do not hesitate to contact us regarding any questions you may have, or if you would like to request a free design consultation and estimate.
Myrlen Airsweep Systems Division of Control Concepts, Inc