KUBOTA EXCAVATORS WHOLEGOODS PRICE LIST EFFECTIVE MARCH 17, 2014 These pages are a complete revision of this section of your price book. All prices are effective March 17, 2014. Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point. Complete revision March 17, 2014. Page 11-1 EQUIPMENT = 24.5% IMPLEMENTS = 15% PARTS = 8.5%
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KUBOTAEXCAVATORS
WHOLEGOODS PRICE LIST EFFECTIVE MARCH 17, 2014
These pages are a complete revision of thissection of your price book.
All prices are effective March 17, 2014.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-1
EQUIPMENT = 24.5%IMPLEMENTS = 15%PARTS = 8.5%
KUBOTAK Series K008-3T4
K008-3T4 Hydraulic Excavator
FEATURES ENGINE Rubber Tracks D722 Kubota E-TVCS Tier 4 Diesel Engine 2-Post Foldable ROPS 3 Cylinder, 4 Cycle Variable Width Track Frame 10.1 Net HP @ 2050 rpm Kubota 2 Hydraulic Pump Design 2 Gear Type Pumps OPERATIONAL DIMENSIONS Two Operating Pattern Selection System Max Digging Depth 5’ 8” Standard Front Dozer Blade Max Digging Radius @ Ground Level 9’ 11” 360 Degree Full Rotation Max Vertical Digging Depth 4’ 6” 55º Left And 60º Right Boom Swing Angle Max Dumping Height 6’ 8” 5.5 GPM Auxiliary Hydraulics Port Five Second Quick Preheat System DOZER BLADE DIMENSIONS Key Switch Stop System Width 28” / 34” Self Bleed Fuel System Height 7.9” Two Speed Travel Lift Above Ground 7.9” Drop Below Ground 7.1” BASIC UNIT K008T4, Rubber Tracks, 2-Post Foldable ROPS PERFORMANCE Digging Force @ Bucket (K9776) 2200 lbs. DIMENSIONS AND OPERATING WEIGHT Digging Force @ Dipper Arm 1010 lbs. K008T4 With K9776 Bucket Travel Speed 1.2 / 2.5 mph Overall Length 9’ 0” Climbing Ability 27% / 15 ° Overall Width 2’ 4” ~ 2’ 10” Ground Pressure 3.5 psi Overall Height 7’ 4” Lift Capacity 660 lbs. Operating Weight * 2200 lbs. Over End Ground Clearance 5.9” Blade Grounded 2 Ft. Load Point Height * Includes operator’s weight, 175 lbs. 6 Ft. Load Radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-5
KUBOTAK Series K008-3T4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
K008T4 2028 $21,740.00
With:
PART 2
K9775 36 $346.00
K9776 90 $419.00
K7759 36 $555.00
K7760 47 $564.00
K7768 55 $579.00
K7769 69 $645.00
PART 3
K7748 15 $287.00
KXB310Q 165 $5,630.00
K7761 99 $572.00
K7990 2.2 $575.00
K7773 5 $985.00
Description
K7802 50 $119.00
K7812 2.5 $20.00
PART 4K7787 154 $786.00
Required for KXB310Q installation on K008-3 & K008-3T4
For hydraulic breaker maintenance only. Requires hose assembly. Order 70003-00677 from parts.
Optional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K7812 Spark Arrestor Screen
Hydraulic Breaker BracketRequired for KXB310Q Pin-On configuration.
kit, 9.8' long. Order 70000-03824 from Parts
Accumulator Charge Kit
77700-00403
Spark Arrestor Muffler Kit
Spark Arrestor Screen
Part Nos.77700-0033877700-00320
ATTACHMENTS
and K7990 Hose Kit
Hydraulic Breaker, 200 ft. lbs. ratedIncludes manual, one moil point and one chisel point.
For K008-3 & K008-3T4 requires K7761 Bracket
DESCRIPTION
For K008 requires K7761 Bracket and a longer hose
Replacement 2-Post Foldable ROPS
Replacement Moil PointReplacement Chisel PointSpade Tool (Parallel To Boom)
10 inch 0.49 cu. ft. H.D. Bucket (Bolt-on teeth)
Two Way Service Port Hydraulic KitThe K7748 converts the auxiliary hydraulics from one way to two way flow. Includes manual, hydraulic hoses, and fittings
10 inch 0.49 cu. ft. Bucket (Welded teeth)
14 inch 0.74 cu. ft. Bucket (Welded teeth)
BUCKETS
8 inch 0.35 cu. ft. H.D. Bucket (Bolt-on teeth)
MODEL K008T4 BASIC UNIT
Excavator Basic Unit
Hydraulic Breaker Hose Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-6
KUBOTAK Series U17VR1
U17VR1Zero Tail Swing Hydraulic Excavator
FEATURES ENGINEZero Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model, Variable Track Gauge 3 Cylinder, 4 Cycle ROPS/OPG (Top Guard, Level I) 4-Post Canopy 15.2 Net HP @ 2300 rpm High Back Suspension Seat Kubota 3 Hydraulic Pump Design Operational Dimensions 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 7’ 7” Hydraulic Joystick Controls With Wrist Rests Max Digging Radius @ Ground Level 12’ 7” Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 3” Standard Front Dozer Blade with Extensions Max Dumping Height 8’ 0” 360 Degree Full Rotation 65 Degree Left, 58 Degree Right Boom Swing DOZER BLADE DIMENSIONS 7.3 Gpm Auxiliary Hydraulics Port Width 3’ 3” / 4’ 1” Five Second Quick Preheat System Height 10.3” Key Switch Stop System Lift Above Ground 11.0” Short Pitch Rubber Tracks Drop Below Ground 7.5” Self Bleed Fuel System Two Speed Travel PERFORMANCE Digging Force @ Bucket (K7970) 3417 lbs Basic Units Digging Force @ Dipper Arm 1918 lbs U17VR1, Rubber Tracks, 4-Post ROPS/OPG (Top Travel Speed (Low) 1.4 mph Guard, Level I) Travel Speed (High) 2.6 mph Climbing Ability 36% / 20° Dimensions and Operating Weight Lift Capacity 1,140 lbs U17VR1, Rubber Tracks, 4-Post ROPS/ OPG (Top Over End Guard, Level I) Blade Grounded Overall Length 11’ 7” 2.0 ft Load Point Height Overall Width 3’ 3” / 4’ 1” 8.0 ft Load radius Overall Height 7’ 8” Operating Weight 3814 lbs* Ground Clearance 5.9” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-7
HOW TO SELECT A U17VR1 EXCAVATOR(Sample Order Information Page)
Below is an example of a complete U17VR1 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U17VR1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-8
HOW TO SELECT A KX018-4 EXCAVATOR(Sample Order Information Page)
Below is an example of a complete KX018-4 order. To submit your order, please select the Basic Unit that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX018-4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-12
HOW TO SELECT A U25ST4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U25ST4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U25R1T4 and get: Base Model, rubber tracks, 4-post ROPS/ OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-16
KUBOTAK Series U25ST4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
U25R1T4 5357 $34,590.00 With:
PART 2
K7788 130 $930.00
K7789 150 $988.00
K7790 164 $1,005.00
K7791 193 $1,073.00
K7974 39 $833.00
K9781 24 $251.00
K7975 110 $709.00
K7976 135 $820.00
K7977 150 $932.00
K7978 155 $1,040.00
K7979 180 $1,151.00
PART 3K7912 122 $2,200.00
KXB460Q 350 $8,450.00
Requires K7774 hose kit and a mount bracket (K7755 or K7765)
12 inch 1.44 cu. ft. 3-Hole H.D. BUCKET
Set of 2 bucket ear blanks. Converts buckets to
QUICK COUPLER
24 inch 3.40 cu. ft. 3-Hole H.D. BUCKET
Curl hole and power hole built into quick coupler.
Includes manual, one moil point, and one chisel point.
ATTACHMENTS
The K7978 bucket has four teeth. The K7912 Thumb tines contact the end of the teeth and do not mesh between the teeth.
16 inch 1.9 cu. ft. Trenching Bucket
24 inch 3.0 cu. ft. Trenching Bucket
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS
BUCKET HANGERS
BUCKETS
PIN-ON BUCKETS (Order Attaching Pins from Parts)
18 inch 2.40 cu. ft. 3-Hole H.D. BUCKET
Includes two mounting pins, 1 locking pin, and hardware.
STANDARD UNIT KX71-3S4R1 COMPLETE ORDER AND PRICEBASIC UNIT:
BASIC UNIT:STANDARD UNIT KX71-3S4R2 COMPLETE ORDER AND PRICE
24” 3.73 cu. ft. 3-Hole H. D. Bucket
HOW TO SELECT A KX71-3S4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX71-3S4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX71-3S4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-20
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX71-3S4R1 6305 $38,300.00
With:
KX71-3S4R2 6550 $42,560.00
With:
KX71-3S4S1 6525 $38,300.00
With:
KX71-3S4S2 6770 $42,560.00
With:
PART 2 BUCKETS
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7473 305 $4,336.00
K7474 41 $150.00
K7458 245 $1,360.00
Set of 2 bucket ear blanks. Converts buckets to
Includes hoses and fittings. Tilts 45° each direction.
12 inch 2.60 cu. ft. 3-Hole Bucket
16 inch 2.80 cu. ft. 3-Hole Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
Thumb tines contact the end of the teeth and
24 inch 4.50 cu. ft. 3-Hole Bucket
Excavator Basic Unit
Excavator Basic Unit
Excavator Basic Unit
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
The K7874 bucket has four teeth. The K7902
BOLT ON CUTTING EDGE
quick coupler style. Modification to match
18 inch 3.19 cu. ft. Trenching Bucket
36 inch Grading Blade
Curl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-21
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3K7902 190 $2,558.00
KXB460Q 350 $8,450.00
K7774 16 $645.00
K7758 54 $754.00
K7766 35 $793.00
K7773 5 $985.00
Description
K7461 300 $1,878.00
K9919 20 $124.00
K9736 370 $2,847.00
K9967 7 $293.00
K9989 20 $370.00
K9988 2 $66.00
KXB460Q Hydraulic Hammer Tool Information
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a mount bracket (K7758 or K7766)
Required for KXB460Q Quick Attach configuration
Part Nos.
Required for K9989 installation.
SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K9988 Heat Insulation Kit.
HEAT INSULATION KIT
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
77700-00408
CANOPY WORK LIGHT KIT
24” EXCAVATING RAKE, QUICK ATTACH
Spade Tool (Parallel To Boom)Spade Tool (Transverse To Boom)
77700-0034077700-00322
Required for all KXB460Q installationsHYDRAULIC BREAKER HOSE KIT
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
Replacement Moil PointReplacement Chisel Point
HYDRAULIC BREAKER, 400 ft. lbs. rated
BREAKER MOUNT BRACKET
77700-00405
STEEL CRAWLER KITConvert tracks from rubber to steel
K7870 Quick Coupler required.
ATTACHMENTS
DESCRIPTION
BREAKER MOUNT BRACKET
HYDRAULIC THUMB KIT
ACCUMULATOR CHARGE KIT
Required for KXB460Q Pin-On configuration
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-22
KUBOTAK Series KX71-3S4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4K7890 180 $1,195.00
K7899 400 $5,807.00
K9943A 3 $78.00
K7856C 8 $470.00
CANOPY
RADIO OPTIONCompatible with cab models only. Kit includes AM/FM/WB radio, MP3 port, mounting kit, speakers, and antenna
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
DESCRIPTION
ROPS / OPG (Top Guard, Level I)
The K7899 cab is configured as a replacement for REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
REPLACEMENT 4-POST ROPS/OPG (Top Guard, Level I)
ALLIED ATTACHMENT CONTACTS DESCRIPTION CONTACT:
Earth Auger Model 975, 1475, 1975
McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (563) 922-2082
Vibratory Compactor Model 500B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax (216) 431-2601 Website: http://www.AlliedCP.com
Available from Parts
70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-23
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-24
KUBOTAK Series KX91-3S2
KX91-3S2Hydraulic Excavator
FEATURES DIMENSIONS AND OPERATING WEIGHT
Rubber Or Steel Track Models KX91R1S2, Rubber Tracks, 4-Post ROPS/ OPG (Top ROPS/OPG (Top Guard, Level I) 4-Post Canopy Guard, Level I) Canopy or Cab Overall Length 15’ 7” Suspension Seat Overall Width 5’ 1” Kubota 3 Hydraulic Pump Design Overall Height 8’ 1 Gear, 2 Variable Displacement Pumps Operating Weight* 7110 lbs. Hydraulic Joystick Controls Ground Clearance 11.6” Accumulator Two Operating Pattern Selection System KX91R2S2, Rubber Tracks, ROPS/ OPG (Top Guard, Standard Front Dozer Blade Level I) Heated Cab Float Angle Blade Option Overall Length 15’ 7” 360 Degree Full Rotation Overall Width 5’ 1” 80 Degree Left, 50 Degree Right Boom Swing Overall Height 8’ 10.9 gpm Adjustable Auxiliary Hydraulics Port Operating Weight* 7330 lbs. Five Second Quick Preheat System Ground Clearance 11.6” Key Switch Stop System Half Pitch Rubber Tracks ENGINE Self-Bleed Fuel System D1703-M Kubota E-TVCS Interim Tier 4 Diesel Engine Two Speed Travel 2013 Production Using TPEM Auto Idler 3 Cylinder, 4 Cycle Travel Negative Brake 28.3 Net HP @ 2250 rpm Thumb Bracket & Relief Valves Third Line OPERATIONAL DIMENSIONS Swivel Negative Brake Max Digging Depth 10’ 5” Max Digging Radius @ Ground Level 16’ 10” BASIC UNITS Max Vertical Digging Depth 7’ 10” KX91R1S2, Rubber Tracks, 4-Post ROPS/OPG (Top Max Dumping Height 11’ 7” Guard, Level I) Canopy KX91R1AS2, Rubber Tracks, 4-Post ROPS/OPG DOZER BLADE DIMENSIONS (Top Guard, Level I) Canopy, Angle Dozer Blade Width 61.0” KX91R1AES2, Rubber Tracks, 4-Post ROPS/OPG Height 13.2” (Top Guard, Level I) Canopy, Extendible Dipper Lift Above Ground 14.6” Arm, Angle Dozer Blade Drop Below Ground 14.6” KX91R2S2, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab PERFORMANCE KX91R3S2, Rubber Tracks, Air Conditioned Digging Force @ Bucket (K7875) 8059 lbs. ROPS/OPG (Top Guard, Level I) Cab Digging Force @ Dipper Arm 3592 lbs. KX91R2AS2, Rubber Tracks, ROPS/OPG (Top Travel Speed (Low) 1.9 mph Guard, Level I) Cab, Angle Dozer Blade Travel Speed (High) 2.9 mph KX91R3AS2, Rubber Tracks, Air Conditioned ROPS/ Climbing Ability 36% / 20° OPG (Top Guard, Level I) Cab, Angle Dozer Blade Lift Capacity 2,950 lbs. KX91S1S2, Steel Tracks, 4-Post ROPS/OPG (Top • Over Front Guard, Level I) Canopy • Blade Grounded KX91S3S2, Steel Tracks, Air Conditioned ROPS/ • 2.0 ft. Load Point Height OPG (Top Guard, Level I) Cab • 8.0 ft. Load radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-25
KUBOTAK Series KX91-3S2
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
KX91R1AS2 Excavator Basic Unit 7,140 $46,410.00 With: Rubber Tracks
Angle Dozer BladeDipper ArmCounterweight
K7862A 225 $1,205.00 $47,615.00
KX91R2S2 Excavator Basic Unit 6,930 $47,770.00 With: Rubber Tracks
STANDARD UNIT KX91R2S2 COMPLETE ORDER AND PRICEBASIC UNIT:
STANDARD UNIT KX91R1AS2 COMPLETE ORDER AND PRICEBASIC UNIT:
DESCRIPTION
HOW TO SELECT A KX91-3S2 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX91-3S2 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX91R1AS2 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-26
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX91R1S2 6,710 $43,660.00
With:
KX91R1AS2 7,140 $46,410.00
With:
KX91R1AES2 7,635 $49,600.00
With:
The widest trenching bucket approved for use with the KX91R1AES2 is 16” (K7793 or K7873). Thumbs and hydraulic breakers are not
Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-27
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2 BUCKETS (Cont.)K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7473 305 $4,336.00
K7474 41 $150.00
K7458 245 $1,360.00
PART 3 ATTACHMENTSK7902 190 $2,558.00
KXB460Q 350 $8,450.00
K7774 16 $645.00
K7758 54 $754.00
K7773 5 $985.00
K7461 300 $1,878.00
K9919 20 $124.00
K9928 370 $2,645.00
K9774 7 $280.00
K9939 50 $505.00
K9959A 2.2 $31.00
Emits an audible signal when traveling forward or reverse
Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9959A Heat Insulation Kit.
ACCUMULATOR CHARGE KIT
SPARK ARRESTOR MUFFLER KIT
Required for K9939 installation.
Not approved for use with extendible arm.
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
18 inch 3.19 cu. ft. Trenching Bucket
Convert tracks from rubber to steel
Required for KXB460Q installations
BREAKER MOUNT BRACKET
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket
HYDRAULIC BREAKER HOSE KIT
36" Grading Blade
HYDRAULIC THUMB KITK7870 Quick Coupler required
HYDRAULIC BREAKER, 400 ft. lbs. rated
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
DESCRIPTION
Includes hoses and fittings. Tilts 45° each direction
The K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
For K7473 36” grading bucket
24 inch 4.25 cu. ft. Trenching Bucket
36 inch 3.0 cu. ft. TILT GRADING BUCKET
BOLT ON CUTTING EDGE
24 INCH EXCAVATING RAKE, QUICK ATTACH
HEAT INSULATION KIT
TRAVEL ALARM KIT
Required for KXB460Q Quick Attach configuration
CANOPY WORK LIGHT KIT
STEEL CRAWLER KIT
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-28
KUBOTAK Series KX91-3S2ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4
K7892 165 $1,077.00
K7893 463 $5,807.00
K9946 4 $124.00
K7856C 8 $470.00
radio, MP3 port, mounting kit, speakers, and antenna
DESCRIPTION CONTACT:McMillen
Available from Parts
Compatible with cab models only. Kit includes AM/FM/WB
The K7893 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
As required in some states for OSHA compliance.
ROPS / OPG (Top Guard, Level I)
RETRACTABLE SEAT BELT OPTION (3”)
Model 500BVibratory Compactor
70000-00297 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-29
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-30
KUBOTAK Series U35-4
U35-4Tight Tail Swing Hydraulic Excavator
FEATURES ENGINETight Tail Swing D1703-M Kubota E-TVCS Tier 4 Diesel Engine Auto Idler 3 Cylinder, 4 Cycle Rubber Or Steel Track Models 23.9 Net HP @ 2200 rpm ROPS/OPG (Top Guard, Level I) 4-Post Canopy or Air Conditioned Cab OPERATIONAL DIMENSIONSSuspension Seat Max Digging Depth 9’ 8.9” Kubota 3 Hydraulic Pump Design Max Digging Radius @ Ground Level 16’ 11.3” 1 Gear, 2 Variable Displacement Pumps Max Vertical Digging Depth 6’ 7.3” All Controls Hydraulic Pilot Controls Max Dumping Height 11’ 0.7” Accumulator Two Operating Pattern Selection System STANDARD DOZER BLADE DIMENSIONS Digital Control Pane Width 67” Attachment Flow Presets, Service Alerts Height 13.5” Standard Front Dozer Blade with Float Lift Above Ground 14.65” Optional Float Angle Blade w/ Bolt-on Cutting Edge Drop Below Ground 14.53” 360 Degree Full Rotation 71 Degree Left, 45 Degree Right Boom Swing PERFORMANCE 15.8 gpm Adjustable Auxiliary Hydraulics Port Digging Force @ Bucket (K7875) 7924 lbs. Auxiliary Hydraulics Diverter Valve Digging Force @ Dipper Arm 4451 lbs. Thumb Bracket & Relief Valves Travel Speed (Low) 1.9 mph Five Second Quick Preheat System Travel Speed (High) 2.9 mph Key Switch Stop System Climbing Ability 58% / 30° Half Pitch Rubber Tracks Lift Capacity 3,230 lbs. Self-Bleed Fuel System • Over Front Auto-Downshift Two Speed Travel System • Blade Grounded Swivel Negative Brake • 2.0 ft. Load Point Height Travel Negative Brake • 8.0 ft. Load radius Third Line BASIC UNITS U35-4R1 Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) U35-4R1A Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I), Angle Dozer Blade U35-4R3 Rubber Tracks, Air Conditioned, ROPS/ OPG (Top Guard, Level I) Cab U35-4R3A Rubber Tracks, Air Conditioned ROPS/ OPG (Top Guard, Level I) Cab, Angle Dozer Blade DIMENSIONS AND OPERATING WEIGHT U35R1, Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8129 lbs. Ground Clearance 11.34” U35R2S2, Rubber Tracks, Air Conditioned, ROPS/OPG (Top Guard, Level I) Cab Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8451lbs. Ground Clearance 11.34” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-31
KUBOTAK Series U35-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
U35-4R1A Excavator Basic Unit 8,478 $48,700.00 With: Rubber Tracks
Angle Dozer BladeDipper armCounterweight
K7862A 225 $1,205.00 $49,905.00
U35-4R3 Excavator Basic Unit 8,451 $52,900.00 With: Rubber Tracks
BASIC UNIT:STANDARD UNIT U35-4R1A COMPLETE ORDER AND PRICE
HOW TO SELECT A U35-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U35-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a U35-4R1A and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-32
The K9787 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
ACCUMULATOR CHARGE KIT
CANOPY WORK LIGHT KIT
SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar cellulose materials with potential for ignition. TBA heat insulation kit required.
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
RETRACTABLE SEAT BELT OPTION (3”)
Required for TBA installation.
Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
BREAKER MOUNT BRACKETRequired for KXB460Q Quick Attach configuration
As required in some states for OSHA compliance
HYDRAULIC BREAKER, 400 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket
DESCRIPTION
ALLIED ATTACHMENT CONTACTS
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-34
KUBOTAK Series KX121-3ST3
KX121-3ST3Hydraulic Excavator
FEATURES DIMENSIONS AND OPERATING WEIGHT Auto Idler KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top Rubber Or Steel Track Models Guard, Level 1) Canopy, 6-in-1 Dozer Blade, ROPS/OPG (Top Guard, Level 1) 4-Post Canopy or Air Dipper Arm, Counterweight Conditioned Cab Overall Length 16’ 9” Suspension Seat Overall Width 5’ 7” Kubota 2 Hydraulic Pump Design Overall Height 8’ 3” 1 Gear, 1 Variable Displacement Pumps Operating Weight* 9,615 lbs. Hydraulic Joystick Controls Ground Clearance 13.0” Two Operating Pattern Selection System Standard Front Dozer Blade KX121R3TA, Rubber Tracks, Air Conditioned ROPS/ 360 Degree Full Rotation OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Blade,80 Degree Left, 50 Degree Right Boom Swing Dipper Arm, Counterweight 15.9 gpm Adjustable Auxiliary Hydraulics Port Overall Length 16’ 9” Five Second Quick Preheat System Overall Width 5’ 7” Key Switch Stop System Overall Height 8’ 2 Half Pitch Rubber Tracks Operating Weight* 9,815 lbs. Self-Bleed Fuel System Ground Clearance 13.0” Two Speed Travel Swivel Negative Brake * Includes operator’s weight, 175 lbs. Thumb Bracket and Relief Valves Third Line ENGINE V2203 E-TVCS Interim Tier 4 Diesel Engine BASIC UNITS 2013 Production Using TPEM KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top 4 Cylinder, 4 Cycle Guard, Level 1) Canopy, 6-in-1 Dozer Blade, Dipper 39.0 Net HP @ 2250 rpm Arm, Counterweight KX121R3TA, Rubber Tracks, Air Conditioned OPERATIONAL DIMENSIONS ROPS/ OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Max Digging Depth 11’ 6” Blade, Dipper Arm, Counterweight Max Digging Radius @ Ground Level 18’ 0” KX121S1TA, Steel Tracks, 4-Post ROPS/ OPG (Top Max Vertical Digging Depth 8’ 2” Guard, Level 1) 6-in-1 Dozer Blade, Dipper Arm, Max Dumping Height 12’ 9” Counterweight KX121S3TA, Steel Tracks, Air Conditioned DOZER BLADE DIMENSIONS ROPS/OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Width 67” Blade, Dipper Arm, Counterweight Height 13.8” Lift Above Ground 15.7” Drop Below Ground 15.9” PERFORMANCE Digging Force @ Bucket (K7875) 8,754 lbs. Digging Force @ Dipper Arm 3,947 lbs. Travel Speed (Low) 1.7 mph Travel Speed (High) 3.1 mph Climbing Ability 36% / 20° Lift Capacity 3,960 lbs. • Over Front • Blade Grounded • 2.0 ft. Load Point Height
• 8.0 ft. Load radius
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-35
HOW TO SELECT A KX121-3ST3 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX121-3ST3 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX121R1TA and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level 1) canopy, 6-in-1 dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-36
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1
KX121R1TA 9,615 $55,200.00 With:
KX121R3TA 9,815 $61,220.00 With:
KX121S1TA 9,755 $55,200.00 With:
KX121S3TA Excavator Basic Unit 9,955 $61,220.00 With:
PART 2
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7797 283 $1,357.00
K9836A 194 $988.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,
Counterweight
BUCKET OPTIONS
PIN-ON BUCKETS (Order attaching pins from Parts)
MECHANICAL QUICK ATTACH OPTIONSQUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
BUCKET HANGERSSet of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
18" 3.19 cu. ft. KK Quick Attach Trenching BucketThe K7118 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
24" KK Quick Attach Excavating Rake
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-38
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
K7120 265 $1,467.00
K7121 230 $1,240.00
K7122 270 $1,400.00
K7123 305 $4,230.00
K7124 185 $5,150.00
K7127 24 $365.00
K7128 24 $365.00
PART 3
K7902 190 $2,558.00
K7474 36 $150.00
K7455 44 $150.00
KXB510Q 610 $9,300.00
K7774 16 $645.00
K7992 95 $797.00 Hammer
K7126 95 $885.00 for KXB510Q Hammer
K7773 5 $985.00
K9919 4 $124.00
HYDRAULIC BREAKER HOSE KITRequired for KXB510Q installations
Mechanical Quick Attach (K7870) Hammer Bracket for KXB510Q
39" 4.72 cu. ft. KK Quick Attach Tilt Grading Bucket
ATTACHMENTS
HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required
36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets
BUCKET HANGERS, CONTOURED BUCKETS
30" 5.31 cu. ft. KK Quick Attach Trenching Bucket
36" 6.64 cu. ft. KK Quick Attach Drainage Bucket
36" KK Quick Attach Grading Blade
36" 3.0 cu. ft. KK Quick Attach Tilt Grading Bucket
KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket
ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.
CANOPY WORK LIGHT KIT
Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.
BUCKET HANGERS, NON-CONTOURED BUCKETSConverts other brand buckets to KK quick coupler style. Modification to match bucket contour required.
39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket
HYDRAULIC BREAKER, 500 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-39
KUBOTAK Series KX121-3ST3
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K9929 439 $3,762.00
K9777 3 $280.00
K9949 8 $240.00
K9969 HEAT INSULATION KIT 2.2 $16.00
PART 4
K7894 220 $1,106.00
K7895 450 $5,903.00
K9946 4 $124.00
K7856C 8.2 $470.00
radio, MP3 port, mounting kit, speakers, and antenna
DESCRIPTION CONTACT:Earth Auger McMillenModel 975, 1475, 1975 503 Gay Street
Delhi, Iowa 52223
Vibratory CompactorModel 500B 3900 Kelly Avenue
Flail MowerModel 30EX PO Box 22
Hughson, CA 95326
Available from Parts
STEEL CRAWLER KITConvert tracks from rubber to steel
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
SPARK ARRESTOR MUFFLER KIT
Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9969 Heat Insulation Kit
Required for K9949 installation
The K7895 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
Compatible with cab models only. Kit includes AM/FM/WB
Website: http://www.AlliedCP.com
Allied Construction Products, LLC
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
STANDARD UNIT KX040-4R3A COMPLETE ORDER AND PRICEBASIC UNIT:
DESCRIPTION
Excavator Basic Unit
ATTACHMENTS:
STANDARD UNIT KX040-4R1 COMPLETE ORDER AND PRICE
HOW TO SELECT A KX040-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX040-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX040-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-42
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-44
KUBOTAK Series KX040-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7792A 200 $1,000.00
K7793 214 $1,075.00
K7794 223 $1,123.00
K7796 260 $1,238.00
K7797 283 $1,357.00
K9836A 194 $988.00
K7870 72 $904.00
K9807 88 $326.00
K7872 160 $964.00
K7873 185 $1,005.00
K7874 190 $1,070.00
K7875 240 $1,269.00
K7461 300 $1,878.00
K7876 265 $1,467.00
K7877A 230 $1,129.00
K7458 270 $1,360.00
K7473 305 $4,336.00
K7454 485 $4,920.00
12 inch 2.13 cu. ft. Trenching Bucket
16 inch 2.83 cu. ft. Trenching Bucket
18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7910 Thumb tines contact the end of the teeth and do not mesh between the teeth.
30 inch 5.80 cu. ft. 3-Hole Bucket
36 inch 4.17 cu. ft. Drainage Bucket
QUICK ATTACH BUCKETS
MECHANICAL QUICK ATTACH OPTIONS
QUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.
BUCKET HANGERS
Set of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
Includes hoses and fittings. Tilts 45° each direction.
39 inch 4.72 cu. ft. Tilt Grading BucketIncludes hoses and fittings. Tilts 45° each direction
DESCRIPTION
BUCKET OPTIONS
12 inch 2.6 cu. ft. 3-Hole Bucket
16 inch 2.80 cu. ft. 3-Hole Bucket
18 inch 3.20 cu. ft. 3-Hole Bucket
24 inch 4.50 cu. ft. 3-Hole Bucket
36 inch 6.64 cu. ft. Drainage Bucket
24 inch 4.25 cu. ft. Trenching Bucket
24” Excavating Rake
30 inch 5.31 cu. ft. Trenching Bucket
36” Grading Blade
36 inch 3.0 cu. ft. TILT GRADING BUCKET
PIN-ON BUCKETS (Order attaching pins from Parts)
K7877A not authorized for thumb applications
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-45
KUBOTAK Series KX040-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
K7100 72 $1,900.00
K7101 180 $1,150.00
K7106 180 $1,040.00
K7108 180 $250.00
K7110 180 $1,015.00
K7112 180 $1,030.00
K7116 160 $985.00
K7117 185 $1,020.00
K7118 190 $1,085.00
K7119 240 $1,270.00
K7125 300 $1,895.00
K7120 265 $1,467.00
K7121 230 $1,240.00
K7122 270 $1,400.00
K7123 305 $4,230.00
K7124 185 $5,150.00
K7127 24 $365.00
K7128 24 $365.00
KK Hydraulic Quick Coupler Base Kit
KK Hydraulic Coupler Completion Kit
Converts the K106 Mechanical System to a KK Hydraulic System. Must also order the K7112
KK Mechanical Coupler Base KitMechanical operation only. Requires K7108 completion kit.
DESCRIPTION
Contains components required to complete the K7106 kit.
KK Hydraulic Upgrade Base Kit
KK Hydraulic Upgrade Completion Kit
The K7118 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.
Converts other brand buckets to KK quick coupler style. Modification to match bucket contour required.
BUCKET HANGERS, CONTOURED BUCKETS
36" 3.0 cu. ft. KK Quick Attach Tilt Grading Bucket
39" 4.72 cu. ft. KK Quick Attach Tilt Grading Bucket
KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS
Base coupler. Requires K7101 completion kit.
KK Mechanical Coupler Completion Kit
Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.
24" 4.25 cu. ft. KK Quick Attach Trenching Bucket
30" 5.31 cu. ft. KK Quick Attach Trenching Bucket
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-46
KUBOTAK Series KX040-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7910 190 $2,558.00
K7474 41 $150.00
K7455 44 $150.00
KXB510Q 610 $9,000.00
K7774 16 $645.00
K7992 95 $797.00
K7126 95 $885.00 for KXB510Q Hammer
K7773 5 $985.00
K7940 6 $135.00
K9929 439 $3,762.00
K7927 2 $143.00
PART 4K9153 250 $1,850.00
CANOPY
K9152 390 $8,150.00
K7479 4 $280.00
K9946 4 $124.00
Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket
HYDRAULIC BREAKER HOSE KIT
Required for KXB510Q installations
Mechanical Quick Attach (K7870) Hammer Bracket for
KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket
Cab Mirror Kit
KXB510Q Hammer
ATTACHMENTS
HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required
36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets
39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket
HYDRAULIC BREAKER, 500 ft. lbs. rated
The K9152 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.
As required in some states for OSHA compliance.
one rear mirror, and attaching hardware
RETRACTABLE SEAT BELT OPTION (3”)
ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.
CANOPY WORK LIGHT KIT
STEEL CRAWLER KITConvert tracks from rubber to steel
TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
HOW TO SELECT A U55-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete U55-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a U55-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard Level I) Canopy, dozer blade, dipper arm, counterweight, and one service port
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-50
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-51
KUBOTAK Series U55-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7915 100 $851.00
K7916 82 $294.00
K7917 249 $1,138.00
K7918 275 $1,155.00
K7919 295 $1,219.00
K7920 338 $1,486.00
K7921 368 $1,658.00
K7926 265 $1,200.00
K7922 230 $1,138.00
K7474 41 $150.00
K7924 270 $1,627.00
K7878 51 $200.00
PART 3K7937 195 $2,147.00
K7932 325 $1,090.00
KXB560Q 820 $12,250.00
K7931 99 $797.00
K7941 22 $567.00
K7773 5 $985.00
K7940 20 $135.00
K7927 7 $143.00
K7938 1298 $5,150.00
Bolt On Cutting Edge for K7924 48” Drainage Bucket
Bolt On Cutting Edge for K7922 36” Drainage Bucket
36 inch 3.48 cu. ft. Cemetery Bucket
36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge.
48 inch 8.50 cu. ft. Drainage Bucket
on models with K7937 thumb.Pre-drilled for bolt on cutting edge. Not authorized for use
Includes two mounting pins, 1 locking pin and hardware.
30 inch 8.00 cu. ft. Trenching Bucket
36 inch 8.00 cu. ft. Trenching Bucket
FROST RIPPER
HYDRAULIC BREAKER
ACCUMULATOR CHARGE KIT
Required for all KXB560Q installations
BREAKER MOUNT BRACKETRequired for all KXB560Q installations
BREAKER HOSE KIT
Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.
CANOPY WORK LIGHT KIT
TRAVEL ALARM KIT
Steel Crawler Kit
12 inch 3.00 cu. ft. Trenching Bucket
18 inch 4.50 cu. ft. Trenching Bucket
24 inch 6.30 cu. ft. Trenching Bucket
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS
Quick Coupler
ATTACHMENTS
The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.
K7915 Quick Coupler required.
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
Bucket Hangers
DESCRIPTION
Converts tracks from rubber to steel
Required for hydraulic breaker maintenance only, one kit for servicing all breakers
Emits an audible signal when traveling forward or reverse.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-52
KUBOTAK Series U55-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4
K7935 250 $1,550.00
K7936 390 $6,600.00
K7479 4 $280.00
K9946 4 $124.00
K7942A 6 $248.00
V4218A 3 $176.00 STROBE LIGHT KIT
DESCRIPTION
RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.
RADIO OPTION
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware
The K7936 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
STANDARD UNIT KX057-4R3AP COMPLETE ORDER AND PRICE
BASIC UNIT:
HOW TO SELECT A KX057-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX057-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX057-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm, counterweight, and one service port
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-56
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-57
KUBOTAK Series KX057-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7915 100 $851.00
K7916 82 $294.00
K7917 249 $1,138.00
K7918 275 $1,155.00
K7919 295 $1,219.00
K7920 338 $1,486.00
K7921 368 $1,658.00
K7926 265 $1,200.00
K7922 230 $1,138.00
K7474 41 $150.00
K7924 270 $1,627.00
K7878 51 $200.00
PART 3 ATTACHMENTSK7937 195 $2,147.00
K7932 325 $1,090.00
KXB560Q 820 $12,250.00
K7931 99 $797.00
K7941 22 $567.00
K7773 5 $985.00
K7940 20 $135.00
K7927 7 $143.00
Required for hydraulic breaker maintenance only, one kit for servicing all breakers
24 inch 6.30 cu. ft. Trenching Bucket
30 inch 8.00 cu. ft. Trenching Bucket
36 inch 8.00 cu. ft. Trenching Bucket
36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge
ACCUMULATOR CHARGE KIT
Required for all KXB560Q installations
Quick Coupler
DESCRIPTION
QUICK ATTACH BUCKETS
CANOPY WORK LIGHT KIT
TRAVEL ALARM KIT
BREAKER MOUNT BRACKETRequired for all KXB560Q installations
BREAKER HOSE KIT
Bucket Hangers
Bolt On Cutting Edge for K7924 48” Drainage Bucket
12 inch 3.00 cu. ft. Trenching Bucket
18 inch 4.50 cu. ft. Trenching Bucket
48 inch 8.50 cu. ft. Drainage Bucket
36 inch 3.48 cu. ft. Cemetery Bucket
K7915 Quick Coupler required.
Pre-drilled for bolt on cutting edge
Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.
The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.
Emits an audible signal when traveling forward or reverse.
Includes two mounting pins, 1 locking pin and hardware.
Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.
HYDRAULIC THUMB KIT
Bolt On Cutting Edge for K7922 36” Drainage Bucket
FROST RIPPER
HYDRAULIC BREAKER
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-58
KUBOTAK Series KX057-4ORDER CODE
APPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3K7938 1298 $5,150.00
PART 4
K7933 250 $1,550.00
K7934 390 $6,600.00
K7479 4 $280.00
K9946 4 $124.00
K7942A 6 $248.00
V4218A 3 $176.00
As required in some states for OSHA compliance.
The K7934 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
ATTACHMENTS (Cont.)
Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.
Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab
Converts tracks from rubber to steel
ROPS / OPG (Top Guard, Level I)
Cab Mirror KitIncludes two side mirrors, one for each side,
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT:
Earth Auger Model 975, 1475, 1975
McMillen 503 Gay Street Delhi, IA 52223 Tel: (800) 922-2981, Fax (319) 922-2700 Website: www.paladinbrands.com
Vibratory Compactor Model 500B, 1000B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: hppt://www.AlliedCP.com
Flail Mower Model 30EX
Rockhound Attachments PO Box 220 Hughson, CA 95326 Tel: (800) 426-5615, Fax (360) 230-2322 Website: www.rockhound.com
Available from Parts 70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-59
KUBOTA
This page intentionally left blank.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-60
KUBOTAK Series KX080-4
KX080-4 ExcavatorTight Tail Swing Utility Class Excavator
FEATURES ENGINEEco Plus System V3307 Kubota DI CRS Turbo Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 67.3 Net HP @ 2000 rpm Air Conditioned ROPS/OPG (Top Guard, Level I) Cab Cloth Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 15’ 1” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 23’ 6.3” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 12’ 7.6”Two Operating Pattern Selection System Max Dumping Height 17’ 2.7” Accumulator Standard Front Dozer Blade w/ Float DOZER BLADE DIMENSIONS Optional Float Angle Blade w/ Bolt-on Cutting Edge Width 86.6” 360 Degree Full Rotation Height 19.7” 70 Degree Left, 60 Degree Right Boom Swing Lift Above Ground 19.7” 17.6 gpm Adjustable Auxiliary Hydraulics Port 1 Drop Below Ground 19.7” 26.4 gpm Adjustable Auxiliary Hydraulics Port 2 Thumb Bracket and Relief Valves PERFORMANCE Five Second Quick Preheat System Digging Force @ Bucket (K7427) 14,660 lbs.Key Switch Stop System Digging Force @ Dipper Arm 8,554 lbs. Half Pitch Rubber Tracks Travel Speed (Low) 1.7 mph Self-Bleed Fuel System Travel Speed (High) 3.1 mph Auto-Downshift Two Speed Travel System Climbing Ability 36% / 20° Swivel Negative Brake Lift Capacity 6,500 lbs. Travel Negative Brake Over Front Third Line Blade Grounded 4.0 Ft. Load Point Height 12.0 Ft. Load Radius BASIC UNITS KX080-4R3, Rubber Tracks, Air Conditioned DIMENSIONS AND OPERATING WEIGHT ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, KX080-4R3, Rubber Tracks, Air Conditioned ROPS/OPG Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, KX080-4R3A, Rubber Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” KX080-4S3, Steel Tracks, Air Conditioned Overall Height 8’ 4” ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Operating Weight* 18,280 lbs. Dipper Arm, Counter weight Ground Clearance 15.4” KX080-4S3A, Steel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer KX080-4S3, Steel Tracks, Air Conditioned ROPS/OPG Blade, Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm,KX080-4W3, 24” Wide Steel Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Wide Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” Overall Height 8’ 4” Operating Weight* 18,390 lbs. Ground Clearance 15.4” * Includes operator’s weight, 175 lbs.
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-61
HOW TO SELECT A KX080-4 EXCAVATOR(Sample Order Information Page)
Below are examples of a complete KX080-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.
STEP 1)
Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX080-4R3A and get: Base model, rubber tracks, air conditioned ROPS/OPG (Top Guard, Level I) cab, angle dozer blade, dipper arm, and counterweight.
STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.
(SAMPLE ORDER)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-62
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 1KX080-4R3 18,280 $107,000.00
With:
KX080-4R3A 19,140 $112,300.00
With:
KX080-4S3 18,390 $107,000.00 With:
KX080-4S3A 19,250 $112,300.00 With:
KX080-4W3 18,670 $110,700.00 With:
PART 2 BUCKETS
K7416 405 $1,674.00
K7417 460 $2,150.00
K7418 505 $2,387.00
K7419 539 $2,660.00
K7436 565 $2,474.00
K7437 615 $2,586.00
K7438 665 $2,656.00
K7402 140 $1,560.00
K7407 139 $429.00
DESCRIPTION
EXCAVATOR BASIC UNIT
Steel Tracks (450 mm, 17.7”), EXCAVATOR BASIC UNIT
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-63
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 2
K7426 393 $1,804.00
K7427 448 $2,148.00
K7428 493 $2,336.00
K7429 527 $2,610.00
K7441 553 $2,418.00
K7442 603 $2,530.00
K7444 850 $7,456.00
K7443 652 $2,626.00
K7448 500 $2,227.00
K7451 79 $162.00
K7452 89 $185.00
K7453 109 $202.00
PART 3
K7405 370 $4,083.00
KXB600F 875 $13,500.00
KXB860Q 1,110 $16,000.00
K7477A 16 $787.00
K7475 175 $1,372.00
K7476 160 $1,338.00
K7993 95 $1,338.00
BOLT-ON CUTTING EDGE
K9857 Additional Weight Kit required with K7405 Thumb applications
48 inch 10.8 cu. ft. GRADING BUCKET
36 inch 12.1 cu. ft. TRENCHING BUCKET
30 inch 10.8 cu. ft. TRENCHING BUCKET
K9857 Additional Weight Kit required with K7405 Thumb applications
DESCRIPTION
54 inch 9.6 cu. ft. TILT GRADING BUCKETIncludes hoses and fittings. Tilts 45° each direction
BREAKER MOUNT BRACKET
Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7475 or K7476 mount bracket
Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7993 mount bracket
HYDRAULIC BREAKER, 1,200 ft. lbs. rated
HYDRAULIC BREAKER BRACKET
configuration
Required for all KXB600F and KXB860Q installations
HYDRAULIC BREAKER BRACKET
K7402 quick coupler required
For K7438, and K7443 60” grading bucketsBOLT-ON CUTTING EDGE
For K7436 and K7441 48” grading buckets
54 inch 12.2 cu. ft. GRADING BUCKET
60 inch GRADING BLADE
K9857 Additional Weight Kit required with K7405 Thumb applications
For K7437, K7442, and K7444 54” grading buckets
60 inch 13.5 cu. ft. GRADING BUCKET
18 inch 6.5 cu. ft. TRENCHING BUCKET
Required for KXB600F Quick Attach configuration
BOLT-ON CUTTING EDGE
HYDRAULIC BREAKER, 750 ft. lbs. rated
ATTACHMENTS
24 inch 9.4 cu. ft. TRENCHING BUCKET
Required for KXB600F Pin-On
Required for KXB860Q Quick Attach configuration
HYDRAULIC BREAKER HOSE KIT
HYDRAULIC THUMB KIT
QUICK ATTACH BUCKETS (continued)
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-64
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 3
K7773 5 $985.00
K7449 300 $3,220.00
K4080 1400 $17,372.00
K4081 380 $610.00
K7462 533 $3,880.00
K7463 555 $3,719.00
K7464 720 $4,252.00
K7465 707 $3,872.00
K7467 315 $1,400.00
K7466 295 $1,346.00
K7468 1015 $6,250.00
K7471 980 $5,670.00
K7472 960 $5,670.00
K7482A 1877 $6,820.00
K7483A 300 $7,405.00
K7446 48 $420.00
K7445 1 $83.00
K7459 440 $1,060.00
REPLACEMENT BLADE KIT FOR K4080 SHREDDER
Required for hydraulic breaker maintenance only, one kit for servicing all breakers.
EXCAVATING RAKE, 36”, Pin-on
EXCAVATING RAKE, 36”, Quick Attach
FLAIL BRUSH SHREDDER
Additional Weight Kit
STEEL CRAWLER KIT (600 mm, 23.6”)
DOZER BLADE EXTENSION KITKit consists of left / right blade extensions, two tie down labels, and an Installation Manual. The extensions are welded to the dozer blade to match the width of the K7483A Steel Track Conversion Kit.
TRAVEL ALARM KIT
EXCAVATING RAKE, 48”, Pin-on
EXCAVATING RAKE, 48”, Quick Attach
FROST RIPPER, 24”, Pin-On
FROST RIPPER, 24”, Quick Attach
SOLID TINE GRAPPLE, 36”, Pin-on
COMPACTION WHEEL, 18”, Pin-On
COMPACTION WHEEL, 18”, Quick Attach
STEEL CRAWLER KIT (450 mm, 17.7”)Convert tracks from rubber to steel
Bolts on to the existing counter weight. Increases minimum tail turning radius from 4’ 9.5” to 4’ 11”
Emits an audible signal when traveling forward or reverse.
Brush Guard Kit
Convert tracks from rubber to steel. The K7446 weld-on dozer blade extensions are recommended for theK7483A. Not authorized for angle blade models
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-65
KUBOTAK Series KX080-4
ORDER CODEAPPROX. SHIP WT.
SUGGESTED LIST PRICE
PART 4K7469 463 $8,850.00
V4218A 3 $176.00
K7804 6 $489.00
K9943A 3 $78.00
E9299A 4 $310.00 AM/FM Radio with MP3 Port and 7-Channel Weather Band. The antenna, two speakers and harness come already preinstalled in the cab
Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.
RETRACTABLE SEAT BELT OPTION (3”)
ROPS / OPG (Top Guard, Level I)
As required in some states for OSHA compliance.
RADIO OPTION
REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB
STROBE LIGHT KIT
The K7469 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.
ARM REST KITFor excavators serial number 10000 and below. Standard equipment on excavators serial number 10001 and above.
DESCRIPTION
ALLIED ATTACHMENT CONTACTS
DESCRIPTION CONTACT:
Earth Auger Model 1975
McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (319) 922-2700
Vibratory Compactor Model 1000B
Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com
Rotary Grapple Model PC025B with RGP-252 Rotator Not authorized for use with hydraulic thumbs
Eastern & Central USA Tel: (503 444-2103 Fax: (603) 444-0327 [email protected] www.rotobec.com
Western USA Tel: (250) 765-1161 Fax: (250) 765-0035 [email protected] www.rotobec.com
Available from Parts
70000-73274 Block Heater Kit
Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-66