MP65389–9 Linx Ink Jet Printers Parts and Prices List March 2007 214 Section 10 Mk5 and Mk7 Printhead Offset Code Availability 1009 1010 1014 1016 1018 1035 1039 1055 1056 1059 1065 1070 1075 1121 1240 1243 1270 1280 1290 1305 1306 1310 1311 1405 2030 2035 2250 3103 3123 3124 3160 3240 6100 6120 6220 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 3 2 Y 3 Y Y Y Y Y Y 2 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Mk7 Mini Y Y Y Mk7 Micro Y Y Y Y Y Y 2 Y Y 3 Y Y Y Y Y 2 Y Y Y Y Y Y Y Y Y 3 3 3 Y Y Y Y ### Y Y Y Y Y Y 3 2 ### Offset codes available to recalibrate printheads for the Linx inks shown below, if necessary. Printhead can be calibrated to this ink type but can only be used for up to 3 lines of print (25 high characters for Mk7 or 24 high characters for Mk5). Printhead can be calibrated to this ink type but can only be used for up to 2 lines of print (18 high characters for Mk7 or 16 high characters for Mk5). Available for 6200 printers only. Printhead can be calibrated to this ink type with no restriction on character heights. Wit the exception of the Mk7 Mini Printhead, Printheads are supplied calibrated to Linx Ink 3103. A table of 'Offset Codes' is supplied with each printhead so that it can be recalibrated to any of the allowable ink types shown above. For details of the recalibration procedure refer to the Service/Maintenance Manual appropriate to the printer. Mk7 Midi plus Mk5 Midi 70 μm For more information please refer to the Ink Selling Guide. Mk5 Midi XXXXXXXXXXXX XXXXXXXInkXXX XXXXXXXXXPrint head Mk7 Ultima Mk7 Midi Mk7 Ultima plus
7
Embed
Section 10 Mk5 and Mk7 Printhead Offset Code Availability · MP65389–9 Linx Ink Jet Printers Parts and Prices List 214 March 2007 Section 10 Mk5 and Mk7 Printhead Offset Code Availability
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
MP65389–9Linx Ink Jet Printers Parts and Prices List
March 2007214
Section 10Mk5 and Mk7 Printhead Offset Code Availability
1009
1010
1014
1016
1018
1035
1039
1055
1056
1059
1065
1070
1075
1121
1240
1243
1270
1280
1290
1305
1306
1310
1311
1405
2030
2035
2250
3103
3123
3124
3160
3240
6100
6120
6220
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Y Y Y Y 3 2 Y 3 Y Y Y Y Y Y 2 Y Y Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Mk7 Mini Y Y Y
Mk7 Micro Y Y Y
Y Y Y 2 Y Y 3 Y Y Y Y Y 2 Y Y Y Y Y Y Y Y Y 3 3 3
Y Y Y Y ### Y Y Y Y Y
Y
3
2
###
Offset codes available to recalibrate printheads for the Linx inks shown below, if necessary.
Printhead can be calibrated to this ink type but can only be used for up to 3 lines of print (25 high characters for Mk7 or 24 high characters for Mk5).
Printhead can be calibrated to this ink type but can only be used for up to 2 lines of print (18 high characters for Mk7 or 16 high characters for Mk5).
Available for 6200 printers only.
Printhead can be calibrated to this ink type with no restriction on character heights.
Wit the exception of the Mk7 Mini Printhead, Printheads are supplied calibrated to Linx Ink 3103. A table of 'Offset Codes' is supplied with each printhead so that it can be recalibrated to any of the allowable ink types shown above.
For details of the recalibration procedure refer to the Service/Maintenance Manual appropriate to the printer.
Mk7 Midi plus
Mk5 Midi 70 µm
For more information please refer to the Ink Selling Guide.
Mk5 Midi
XXXXXXXXXXXXXXXXXXXInkXXXXXXXXXXXXPrinthead
Mk7 Ultima
Mk7 Midi
Mk7 Ultima plus
MP65389–9Linx Ink Jet Printers Parts and Prices List
March 2007221
Mk5 Midi PrintheadsSection 10
Midi Printhead
Midi R/A Printhead
1
2
3
MP65389–9Linx Ink Jet Printers Parts and Prices List
Printheads calibrated for 'Food Grade Inks' add £40 premium to the prices shown.
The Mk5 70 Micron Printheads are supplied calibrated to Linx ink 3103.
The Food Grade Mk5 Midi Printheads are supplied calibrated to Linx ink 6100 (24 high only) or to Linx ink
The Mk5 Midi Printheads are supplied calibrated to Linx ink 3103, to Linx ink 6100 for 'FDA-type' Food Grade
The offset code for Linx ink 6120 (24 high only) is supplied with each printhead calibrated to Linx ink 6100.
A table giving the offset codes is supplied with each printhead. If necessary, this can be used to recalibrate for the Linx inks shown at the beginning of this section.
If other Ink/Printhead combinations are required please enquire of Linx Sales department.
The Mk5 70 Micron Printheads are supplied fitted with 50 Micron Printhead Connector (White) FA20254. A table giving the offset codes is supplied with each printhead. If necessary, this can be used to recalibrate for the Linx inks shown at the beginning of this section.
Mk5 printheads should be ordered by ink type, e.g. FA22019/3103, FA22021/6100 or FA22020/6220.
Comments
Recommended for use in applications using a magnetic conveyor in order to shield the printhead Hall effect switch.Not fitted as standard. For use with Mk5 Midi printhead only.
MP65389–9Linx Ink Jet Printers Parts and Prices List
March 2007223
Mk5 Midi Printheads AssemblySection 10
45
6
7
8
9
13
12
11 10
14
1
2
3
MP65389–9Linx Ink Jet Printers Parts and Prices List
8 FA20008 INSULATED RECEPTACLE RED – PACK 20 Ex-stock
Comments
Replacement Nozzle Assembly for Mk5 Midi, Mk7 Ultima and Mk7 Midi printheads calibrated to Linx ink 3103. An offset code is supplied with each nozzle to recalibrate to the Linx inks approved for the printhead type.Replacement Nozzle Assembly for Mk5 Midi printhead calibrated to Linx Ink 6100 (24 High only). The offset code for Linx Ink 6120 (24 High only) is supplied with each nozzle.Mk5 Midi Nozzle Assembly calibrated to Linx Ink 6220 (24 High only).
Replacement Mk5 70 µm Midi hybrid nozzle assembly calibrated to Linx ink 3103. An offset code is supplied with each nozzle to recalibrate to each of the following Linx inks: 1009, 1035, 1039, 1059 (6200 only) and 1240.
Gun cover nut.Nozzle screw.Washer for nozzle and gun cover.
Suitable for all printheads except Mk1.
Suitable for all printheads manufactured from August 1993.
Refer to the maintenance instruction in the Maintenance/Service Manual for the Nozzle Cleaning Procedure.For Mk3B and Mk5 printheads only.To protect printheads against water ingress during washdown; not to be fitted
Must be fitted around printhead fluid pipes and around electrical wiring on TÜV 6000 and CE approved 4200.Suitable for soldered and crimped connectors.
Use for the new type crimped connector on 4200 and 6000 ink system cableforms (refer to Service Bulletin SB0344), and new printheads (refer to Service Bulletin SB0397).To fit mini coax plugs.Part of cableform AS10232.
MP65389–9Linx Ink Jet Printers Parts and Prices List
FA65007 BLANKING SET 1/8 UNION FITTING 3 each Ex-stock
FA65008 FERRULES 1/8 UNION FITTING – PACK 10 each Ex-stock
FA73048 PROTECTION CAP SILICONE – PACK 10 Ex-stock
The following items are only applicable to old build printheads fitted with three 1/8 union fittings.
Comments
All black fluid connector used on Ultima and Midi printheads. To provide easier and faster mistake-proof printhead connection.Fluid connector used on Mk7 Midi plus printheads and Mk5 70 µm Midi printheads. All white body with white plastic filter.For use with FA20110 and FA20254 connectors. For use with FA20110 and FA20254 connectors. Black plastic filter. For use with FA20110 connector. Includes insert/extract tool and gasket.
White plastic filter. For use with FA20254 connector. Includes insert/extract tool and gasket.To prevent ink siphoning when printhead is mounted below printer level. For use on all Mk7 printheads and Mk5 Midi printheads with Linx inks 1240 and 1070 only.
Increases gutter flow for inverted printhead applications. Suitable for use on Midi printheads only.For use with white pigmented ink printers.Fit between printhead D-connector and Amplifier PCB (refer to Service Bulletin SB0347).
Fit between printhead D-connector and Amplifier PCB (refer to Service Bulletin SB0347).
Includes three caps, three plugs, gap gauge and tube cutter. Only applicable to printheads fitted with 1/8" union fitting connectors.Includes caps and plugs for blanking union fittings. Only applicable to printheads fitted with 1/8" union fitting connectors.Front and rear replacement ferrules. Only applicable to printheads fitted with 1/8"
Use to cap printhead fluid lines for dust protection during transit. Only applicable to printheads fitted with 1/8" union fitting connectors.