FILTRATION SECTION 1 1 • F I L T R A T I O N LOW PRESSURE FILTER ..................................................................3 MEDIUM PRESSURE FILTERS ..........................................................3 HIGH PRESSURE MAINFOLD MOUNTED FILTER ..............................5 HIGH PRESSURE CETOP 3 MOUNTED FILTER ..................................5 MINI HIGH PRESSURE FILTER..........................................................5 HIGH-PRESSURE FILTERS ................................................................6 RETURN FILTERS ............................................................................7 RETURN LINE FILTERS ....................................................................8 TANK-TOP RETURN FILTER .............................................................9 TANK TOP MOUNTED RETURN LINE FILTERS ................................10 TANK TOP RETURN FILTER - SPIN ON ...........................................11 SUCTION FILTERS ..........................................................................11 SUCTION STRAINERS .....................................................................12 DIFFUSERS .....................................................................................13 FILLER BREATHERS .......................................................................13 AIR FILTER ....................................................................................14 WELD ON FILLER BREATHER .........................................................15 LOCKABLE FILLER BREATHER .......................................................15
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
TANK TOP MOUNTED RETURN LINE FILTERS ................................10 TANK TOP RETURN FILTER - SPIN ON...........................................11SUCTION FILTERS ..........................................................................11SUCTION STRAINERS.....................................................................12DIFFUSERS.....................................................................................13FILLER BREATHERS .......................................................................13AIR FILTER ....................................................................................14WELD ON FILLER BREATHER.........................................................15LOCKABLE FILLER BREATHER.......................................................15
FILTRATION • 2
LOCKABLE CLEANABLE FILLER BREATHER ..................................15ANGLED FILLER BREATHER...........................................................16PUSH IN FILLER BREATHER...........................................................16SPIN-ON AIR BREATHER................................................................16AIR BREATHERS.............................................................................16PLASTIC HYDRAULIC THREADED AIR BREATHERS.......................16STEEL HYDRAULIC THREADED AIR BREATHERS...........................16LEVEL INDICATORS........................................................................17ELECTRIC TYPE LEVEL INDICATORS..............................................17
ELECTRIC LEVEL INDICATORS.......................................................18SIMPLEX AND DUPLEX INDUSTRIAL FILTERS...............................22SIGHT GLASSES.............................................................................25PLUGS ............................................................................................25BREATHERS ...................................................................................25
IN LINE LOW PRESSURE FILTER HF625 SERIESThese filters are designed to be connected to any low pressure line up to 25bar of any hydraulic circuit.
ALUMINIUM HEAD • STEEL BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RATING UP TO 85 L/MINMAX WORKING PRESSURE 25 BAR • TESTING PRESSURE 50 BAR • BURST PRESSURE 75 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
IN LINE MEDIUM PRESSURE FILTER HF650 SERIESThe filter HF650 is suitable for working pressure up to 35 bar.
ALUMINIUM HEAD • STEEL BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RATING UP TO 140 L/MINMAX WORKING PRESSURE 35 BAR • TESTING PRESSURE 70 BAR • BURST PRESSURE 105 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
IN LINE MEDIUM PRESSURE FILTER HF690 SERIESThese in line medium pressure filters are specifically designed to be connected on the pressure line of the hydraulic circuit and provide versatility to safeguard the circuit components from contaminating particles.
ALUMINIUM HEAD • ALUMINIUM BOWL • BUNA SEALS • FLOW RANGE 10-80L/MIN • MAX WORKING PRESSURE 110 BARTESTING PRESSURE 160 BAR • BURST PRESSURE 330 BAR • OPERATING TEMPERATURE WITH BUNA SEALS -20 +80(˚C)WITH VITON SEALS -20 +110(˚C) • WITH FLUID (HH-HL-HM-HR-HV-HG) AND WATER EMULSION (HFAE-HFAS) USE BUNASEALS, WITH SYNTHETIC FLUID (HS-HFDR-HFDU-HFDS) USE VITON SEALS
IN LINE MEDIUM PRESSURE FILTER HF745 SERIESThe filter HF745 is suitable for working pressure up to 280 bar.
CAST IRON HEAD • STEEL BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RATING UP TO 90 L/MINMAX WORKING PRESSURE 280 BAR • TESTING PRESSURE 420 BAR • BURST PRESSURE 560 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
IN LINE MEDIUM PRESSURE FILTER HF650 SERIESCONTINUED FROM PREVIOUS PAGE
UP TO
110BAR
UP TO
280BAR
5 • FILTRATION
IN LINE HIGH PRESSURE MAINFOLD MOUNTED FILTER HF735 SERIESThe filter HF735 is suitable for working pressure up to 320 bar.
CAST IRON HEAD • STEEL BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RATING UP TO 180 L/MINMAX WORKING PRESSURE 320 BAR • TESTING PRESSURE 480 BAR • BURST PRESSURE 640 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
IN LINE MINI HIGH PRESSURE FILTER HF705 SERIESThe in line high pressure filter HF705 series are specifically designed to be connected on the pressure line of the hydraulic circuit and provide versatility to safeguard the circuit components from contaminating particles.
ALUMINIUM GALVANISED BODY • SINTERED BRONZE FILTER MEDIA • BUNA SEALS • FLOW RANGE 10-50L/MINMAX WORKING PRESSURE 350 BAR • TESTING PRESSURE 500 BAR • BURST PRESSURE 800 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
IN LINE HIGH PRESSURE CETOP 3 MOUNTED FILTER HF725 SERIESThe high pressure filter HF725 series are characterised by a direct and Cetop 3 connections, Modular Assembly, Compact Design and Low Weight.
CAST IRON HEAD • STEEL C45 BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RATING UP TO 40 L/MINMAX WORKING PRESSURE 350 BAR • TESTING PRESSURE 475 BAR • BURST PRESSURE 600 BAROPERATING TEMPERATURE WITH BUNA SEALS -30 +90(˚C) WITH VITON SEALS -20 +110(˚C)
HIGH-PRESSURE FILTERS HF760 SERIESInline High Pressure filters series 760 are designed to be connected on the pressure line of the hydraulic circuit.
CAST IRON BODY GS 450-10 UNI 1801083 • BOWL: EXTRUDED STEEL • SEALS: BUNAFLOW RANGE: 30-450 L/MIN • MAX WORKING PRESSURE: 420 BAR • OPERATING TEMPERATURE -30 +90˚cC/W BYPASS SET AT 6 BAR • C/W VISUAL DIFFERENTIAL INDICATOR
OPTIONS AVAILABLEUPON REQUEST
• 3 MICRON GLASSFIBRE• 6 MICRON GLASSFIBRE• 210 BAR ELEMENT COLLAPSE
IN-LINE RETURN FILTERS HF620These filters are designed specifically to be connected on the return line of any hydraulic circuit to provide safeguard fromcontaminating particles.ALUMINIUM HEAD • STEEL BOWL • BUNA-VITON SEALS • C/W VISUAL INDICATOR (HF620-20)C/W VISUAL INDICATOR (HF620-40) • FLOW RANGE 20-400 L/MIN • MAX WORKING PRESSURE 7 BARTESTING PRESSURE 10 BAR • BURST PRESSURE 15BM • 3 AND 6 MICRON AVAILABLEOPERATING TEMPERATURE -30 +90 (˚c) BUNA SEALS -20 +1101 (˚c) VITON SEALS • BYPASS VALVE
RETURN LINE FILTERS HF595Suction or return line filters to be mounted with filter housing completely inside the oil tank. These can be directly connected to the pump inlet or manifold tank return line.
ANODISED ALUMINIUM CONSTRUCTION • BUNA-VITON SEALS • COMPLETE WITH VISUAL INDICATOR AND BYPASSFLOW RANGE 20-220 L/MIN • MAX WORKING PRESSURE 40BAR (ASK FOR DETAILS) OPERATING TEMPERATURE -30 +90(˚C) BUNA SEALS • OPERATING TEMPERATURE -20 +110(˚C) VITON SEALS
Filtrec S.r.l. offers a complete range of hydraulicfiltration elements. The range also offers acomplete product portfolio with Pressure andReturn line filter, Spin-on elements, Suctionstrainers, Filler breathers for hydraulic,lubrication oil, fuel and air.
Moreover Filtrec replacement elements fit in filterhousings made by any other manufacturers, i.e.they fit geometrically as well as in terms of theirfilter performance.
Not only do Filtrec offer a wide variety of filterhousings but are also experts in designing andmanufacturing filter elements. The original Filtrec elements are ready for mounting inexistent filter systems. With this complete rangeyou can choose more than 50 000 different typesof filter elements.
Our massive inventory allows you to order any part on short notice without having to provideyour own warehousing.
We will gladly take your special requests andprovide you with the items you need. All theFiltrec products are designed and engineered for quality professional performance and longterm reliability.
TANK-TOP RETURN FILTER HF502These filters are designed specifically to be directly connected on the hydraulic return line on top of the hydraulic reservoir toprovide safeguard from contaminating particles.
ALUMINIUM COVER AND HOUSING • STEEL BOWL • BUNA SEALS • C/W VISUAL INDICATOR • FLOW RANGE UP TO 600 L/MINADJUSTABLE BYPASS VALVE • MAX WORKING PRESSURE 8 BAR • TESTING PRESSURE 12 BARBURST PRESSURE 16 BAR • OPERATING TEMPERATURE -30 +80 (˚C), VITON SEALS -20 +110 (˚C)
TANK TOP MOUNTED RETURN LINE FILTERS HF570Retrofits all top name brands. Ask for details.
ALUMINIUM COVER AND HOUSING • STEEL BOWL AND DIFFUSER • BUNA SEALSFLOW RANGE 40 - 500 L/MIN • MAX WORKING PRESSURE 8 BAR • TESTING PRESSURE 12 BAR • BURST PRESSURE 16 BAROPERATING TEMPERATURE -30 +80 (˚C) BUNA SEALS, -20 +110 (˚C) VITON SEALSSECONDARY RETURN PORT AS STANDARD • FILLER CAP FITTED AS STANDARD* • DIFFUSER FITTED AS STANDARDFULL FLOW MAGNETIC PRE FILTRATION ON THE HYDRAULIC RETURN LINE AS STANDARD
TANK TOP RETURN FILTER - SPIN ON STYLE FA2These filters are fixed on top of a tank and are maintenance friendly, just remove spin on by hand and replace.
ALUMINIUM HEAD • CARBON STEEL HOUSING • NBR SEAL • COMPLETE WITH VISUAL INDICATORMATERIAL COMPATIBILITY AS PER ISO 2943 – MINERAL OIL (HH-HL-HM-HR-HV-HG), WATER EMULSIONS (HFAE-HFAS)MAX WORKING PRESSURE AS PER NFPA T2.6.1-1974: 7 BAR • TEST PRESSURE AS PER NFPA T2.6.1-1974: 14 BARBURST PRESSURE AS PER NFPA T2.6.1-1974: 21 BAR • ELEMENT COLLAPSE AS ISO 2941: 4 BARBYPASS SETTING - RETURN LINE 1.7 BAR • WORKING TEMPERATURE -30 +110˚C
IN-LINE SUCTION FILTERS HF620These filters are designed specifically to be connected on the suction line of any hydraulic circuit to provide safeguard fromcontaminating particles.
ALUMINIUM HEAD • STEEL BOWL • BUNA-VITON SEALS • C/W VISUAL INDICATOR (HF620-20)C/W VISUAL INDICATOR (HF620-40) • FLOW RANGE 30-240 L/MIN • MAX WORKING PRESSURE 7 BARTESTING PRESSURE 10 BAR • BURST PRESSURE 15BM • OPERATING TEMPERATURE -30 +90 (˚c) BUNA SEALS -20 +1101 (˚c) VITON SEALS • BYPASS VALVE
SUCTION LINE FILTERS HF595Suction line filters to be mounted with filter housing completely inside the oil tank. These can be directly connected to the pump inlet or manifold tank return line.
ANODISED ALUMINIUM CONSTRUCTION • BUNA-VITON SEALS • COMPLETE WITH VISUAL INDICATOR AND BYPASSFLOW RANGE 0-35 L/MIN • MAX WORKING PRESSURE 40BAR (ASK FOR DETAILS) OPERATING TEMPERATURE -30 +90(˚C) BUNA SEALS • OPERATING TEMPERATURE -20 +110(˚C) VITON SEALS
SUCTION STRAINERSFLOWFIT SUCTION STRAINERS – 125 MICRON WIREMESHTank submerged suction strainers are fitted directly on the pump intake and provide filtration of contamination particles to the hydraulic pump system.CARBON STEEL END CAPS • ALLUMINIUM HEAD • STAINLESS STEEL • MEDIA: 125 MICRONFLOW RANGE 15-180 L/MIN • OPERATING TEMP +90˚C • SEALS BUNA
FILTREC/IKRON SUCTION STRAINERS – 125 MICRON WIREMESHMAX FLOW RATE 300 L/MIN • COLLAPSE PRESSURE 1 BAR • WORKING TEMP -30˚c TO 110˚cHEAD NYLON • ENDCAP CARBON STEEL • WIREMESH 125 MICRONAVAILBLE UPON REQUEST: 60,90 AND 250 MICRONS
FLOWFIT DIFFUSERS (LIMITED STOCKS LEFT)Diffusers reduce aeration, foaming and reservoir noise in any hydraulic fluid application. Designed to help extend all types ofpump life by reducing cavitation to pump inlet.
FLOWS RANGING FROM 220 L/MIN – 500 L/MIN • PORT SIZES 2" – 3" • MADE OF STEEL AND NYLON END CAPSOTHER SIZES OF DIFFUSERS AVAILABLE UPON REQUEST • FLOW RATE L/MIN WITH AP=0.1 BAR.
OEMPRICING
AVAILABLE
OEMPRICING
AVAILABLE
THE WORLDS LEADING HYDRAULICFILTER MANUFACTURER
FILTRATION • 14
IKRON NON PRESSURISEDCARBON STEEL AND PROTECTED WITH SPECIAL TREATMENT FOR PROTECTION AGAINST ATMOSPHERIC ELEMENTSBASKET: STEEL • FILTER: AIR ELEMENT 10 MICRON OR 40 MICRON • GASKETS: RUBBERISED CORKSCREWS: M5 • NON PRESSURISED
IKRON PRESSURISEDCARBON STEEL AND PROTECTED WITH SPECIAL TREATMENT FOR PROTECTION AGAINSTATMOSPHERIC ELEMENTSBASKET: STEEL • FILTER: AIR ELEMENT 10 MICRON OR 40 MICRONGASKETS: RUBBERISED CORK • SCREWS: M5
IKRON FILLER BREATHER AND AIR FILTER HB120 SERIESThe filler breather and air filter are built in glass-filled nylon, a light material, strong and non-corrosive by exposure to atmospheric agents. Prevents oil splash during vehicle movement.
MAX AIRFLOW 1600 L/MIN • OPERATING TEMPERATURE -30 +90˚c • FLUID COMPATABILITY: MINERAL OILS ANDSYNTHETIC FLUID • CORK RUBBER SEALS • WEIGHT .02KG
LOCKABLE FILLER BREATHERSpecially suitable for filtering and cleaning the air exchanged between the tank and the outside atmosphere when the volume of fluid in the tank varies. They optimise filling of the tank with hydraulic fluid, retaining impurities and foreignbodies. They come complete with the accessories required for assembly (screws, seals etc.) The recommended flow rate corresponds to the maximum air flow with a pressure drop of 0.015 bar.
NEW LOCKABLE FILLER BREATHER • PROTECT YOUR OIL AND FUEL • ADD SECURITY NOW TO YOUR SYSTEMSSTOP VANDALISM AND THEFT • STOP UNWANTED CONTAMINATION • CHROME PLATED STEEL WITH BAYONETCLOSURE AND KEY LOCK
LOCKABLE CLEANABLE FILLER BREATHERJUST ONE HOLE (65MM±10) IN THE TANK COVER IS NEEDED TO FIX ITTHE 5µm. FILTER ELEMENT CAN BE REMOVED FOR CLEANING OR REPLACEMENT • LOCKABLEBASKET CAN BE REMOVED
ORDER CODE PRICE ELEMENTS PRICEFBLC £35.33 FBLCE £20.57
SEE PAGE 92 FOR DETAILS OF OUR FILTREC REPLACEMENTELEMENTS CATALOGUE.
FILTRATION • 16
PUSH IN FILLER BREATHERFiller breather for tank top installation with breather and strainer and complete with safety chains. Just drill a hole and push in. Now no need to drill fixing holes, just cut a hole in the top of the reservoir with adiameter of 55mm min and 55.3mm max. Wall thickness must not exceed 8mm and not less than 2mm.Assembly contains 3 parts. To install the inside locking ring has to be removed to insert the main body into apre-drilled hole. Once inserted the inside locking ring has to be installed and then the external locking ringhas to be tightened. MAX OPERATING TEMPERATURE 70-80˚C
SPIN-ON AIR BREATHERHigh capacity air filters 700 L/MIN and 1500 L/MIN displacement designed to remove airborne dirt in any hydraulic system.Please note when fitting a pressurised breather the reservoir must be capable of withstanding pressurisation.
MOUNTED TO TOP OF HYDRAULIC TANK • 3 HOLE FIXING FLANGEREMOVABLE MAINTENANCE FRIENDLY 5 MICRON SPIN ON CANISTER
AIR BREATHERSThe air filters AF105 series are built in steel and are protected with a special treatment to protect themagainst atmospheric corrosion.
PLASTIC HYDRAULIC THREADED AIR BREATHERSPLASTIC THREADED HYDRAULIC BREATHERS WITH 40 MICRON FILTRATION
STEEL HYDRAULIC THREADED AIR BREATHERSSTEEL THREADED HYDRAULIC BREATHERS WITH 40 MICRON FILTRATION
ANGLED FILLER BREATHERAngled filler breather designed for installation on vertical or inclined sides. Complete with washers and screws.Angled filler breather plate only – for filler breathers that can be FIXED TO THIS ANGLED FILLER BREATHER SEE P104FBA25, FBA25L, FT8C101, FT8C102, FT8C401, FT8C402, HHT02380, HHT02340, HHT02550, LFB2 AND LFB3 ARE ALLSUITABLE JUST ONE HOLE (65MM±10) IN THE TANK COVER IS NEEDED TO FIX IT • THE 5µm. FILTER ELEMENT CAN BEREMOVED FOR CLEANING OR REPLACEMENT • LOCKABLE • BASKET CAN BE REMOVED
ORDER CODE PRICEAFB1 £45.27
ORDER CODE ØF ØD Ød h1 h2 h3 h4 S PRICECTR/C 55 88 38 55 80 88 21 2-8 £46.12
LEVEL INDICATORSLevel indicators are mounted on hydraulic reservoirs containing oil based fluids to allow the monitoring ofthe oil level. We also offer options with thermometer to monitor the temperature.
* C/W THERMOMETER DOUBLE SCALE 0–100˚C / 30–210˚F
PARTNUMBER
HOLECENTRES
BOLT THREADSIZE
PRICE
LIE2 127MM M12 X 1.75 £99.18LIE 3 254MM M12 X 1.75 £133.73
FILTREC LEVEL INDICATORSOPERATING TEMPERATURE -30 +80 (˚c) • THERMOMETER DOUBLE SCALE 0–100 (˚c) / 30–210˚FANODIZED ALUMINIUM FRAME WITH NYLON FACE • HEADS: NYLON • SCREWS: ZINC STEEL • SEAL: BUNA-N
ELECTRIC TYPE LEVEL INDICATORSFLUID LEVEL OBSERVED AT 150˚ ANGLE• O RING SEALS ON EVERYCONNECTION POINT GUARANTEEING LEAKAGE PROOF FIXATION •THERMOMETER SCALE 0-100˚C MIN/MAX OPERATING TEMPERATURE -20 +80˚CMAX GAUGE PRESSURE 0.5BAR • SEALS 70˚ SHORE • IP65 ELECTRICPROTECTION • MAXIMUM CONTACT LOAD • ALTERNATIVELY CURRENT UP TO220V (0.5A) • DIRECT CURRENT UP TO 125V (0.3A)
• Gauge manufactured with oil proof plastic• Suitable for use on all ac up to 220 A/AC• DC up to 125v/dc.• Electric features include normally open (n.a) electric contact in non alarm position
OEMPRICING
AVAILABLE
Filtrec S.r.l. offers a complete range of hydraulic filtrationelements. The range also offers a complete productportfolio with Pressure and Return line filter, Spin-onelements, Suction strainers, Filler breathers for hydraulic,lubrication oil, fuel and air.
Moreover Filtrec replacement elements fit in filterhousings made by any other manufacturers, i.e. they fitgeometrically as well as in terms of their filterperformance.
Not only do Filtrec offer a wide variety of filter housingsbut are also experts in designing and manufacturing filterelements. The originalFiltrec elements are ready for mounting in existent filtersystems. With this complete range you can choose morethan 50 000 different types of filter elements.
Our massive inventory allows you to order anypart on short notice without having to provide your ownwarehousing.
We will gladly take your special requests and provide youwith the items you need. All the Filtrec products aredesigned and engineered for quality professionalperformance and long term reliability.
FILTRATION • 18
FIXATIONFig 1
FIXATIONFig 2
FIXATION1" BSPP
ORDER JUST THE ONE AND YOU HAVE ALL THREEFIXING POINTS IN ONE LEVEL GAUGE
ELECTRIC FLOAT LEVEL SWITCHES 2 HOLE MOUNTMaterial: Flange in thermoplastic, brass stem, stop rings in bronze, NBR float.NB:Customized lengths can be supplied on request. Max length 1500mmExecutions also available in accordance with the Directive ATEX 94//9/EC onintrinsic safety equipment with marking II 1/2 G Ex ia IIB T6.
19 • FILTRATION
£79.73£80.50
£81.26£83.17
£85.07£85.84
£89.27£93.08
£226.61£226.61
£226.61£235.38
£235.38
ELECTRIC FLOATING LEVEL GAUGES
FILTRATION • 20
£159.08£159.08
£159.08£159.08
£159.08£159.08
£170.53£170.53
£170.53
£167.48
21 • FILTRATION
OIL LEVEL GAUGES
£146.50£146.50
£194.18£194.18
£182.36£182.36
£245.30£245.30
Filtrec industrial filters meet the most sophisticated requirements of modern equipment and plant applications.High efficiency, high dirtholding capacity and reduced differential pressure are obtained with Filtrec elements.
IFS—RHR RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
OUTS
IDE
TO IN
SIDE
FLO
W D
IREC
TION
INLI
NE S
IMPL
EX F
ILTE
RS
IFS–R4 RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
OUTS
IDE
TO IN
SIDE
FLO
W D
IREC
TION
INLI
NE S
IMPL
EX F
ILTE
RS
IFS—R9 RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
INSI
DE T
O OU
TSID
E FL
OW D
IREC
TION
INLI
NE S
IMPL
EX F
ILTE
RS
IFD—RHR RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
OUTS
IDE
TO IN
SIDE
FLO
W D
IREC
TION
INLI
NE D
UPLE
X FI
LTER
S
IFD—R4 RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
OUTS
IDE
TO IN
SIDE
FLO
W D
IREC
TION
INLI
NE D
UPLE
X FI
LTER
S
IFD—R9 RANGEMAX FLOW: 4500 L/MIN
MAX WORKING PRESSURE: 25 BAR
INSI
DE T
O OU
TSID
E FL
OW D
IREC
TION
INLI
NE D
UPLE
X FI
LTER
S
ASK FOR INFORMATION ON THE ABOVE WHICH CAN BE EMAILED, FAXED, SENT IN THE POST OR DOWNLOADED FROM www.flowfitonline.com
FILTREC SIMPLEX AND DUPLEX INDUSTRIAL FILTERS
SEE PAGE 92 FOR DETAILS OF OUR FILTREC REPLACEMENTELEMENTS CATALOGUE.
FILTRATION • 22
25 • FILTRATION
SIGHT GLASSES, PLUGS AND BREATHERS
OIL LEVEL SIGHTGLASS (PLASTIC)
• Threaded Oil Level indicator, hex head with shoulder. Utilised in oiltanks, gearboxes and general machinery.
• This threaded level indicator allows a pressure of 3 bar.• Asbestos free flat gasket. (available in NBR 70 shore on request)• Manufactured from high density Polymide resin, which offers high
mechanical resistance and withstands oil, gasoline, fuel and most solvents.
SLNSTHREADED OIL LEVEL INDICATORS
SLNTTHREADED OIL LEVEL INDICATORS
WITH CONTRAST SCREEN FOR CLEARER INDICATION OF THE OIL LEVEL
SLELEVEL INDICATOR DESIGNED FOR
USE IN THIN WALL RESERVOIRS AND TANKS (MIN 1MM). FIT IN PRE DRILLED HOLE, TURN WITHHEX SPANNER AND INDICATOR SEAL EXPANDS TO SEAL
CF2CF - DOME SHAPED THREADED
OIL LEVEL INDICATOR GF - STEEL MOUNTING FLANGE
• Transparent halfball shaped level indicator, available with 2” and 3”threaded weld-on steel flanges.
• Made from Thermo Polycarbonate for optimal shock resistance andensuring unbreakability.
• Product is utilised on truck/tankers and larger reservoirs containing liquids.
TCNOIL FILL PLUGS
TCNSOIL FILL PLUG WITH BREATHER HOLE
TSNOIL DRAIN PLUG
• Hex threaded oil fill plug in Thermoplastic material ensuring highmechanical resistance at both low and higher temperature (max.100/110˚C), dimensional stability and shock resistant.
• Flat asbestos free oil resistant seal.• Style TCN and TCNS have the UNI fill symbol and the word OIL molded on top; the model
TCNS has a breather hole located in the side of the hex with a diameter of 2-2.5mm.• Style TSN has the UNI drain symbol on top.
• Aluminium threaded with glass face • Max temp. 150˚c• Max pressure 3 Bar • Knob type • Nitrile seals
LSBOIL LEVEL INDICATOR IN TRANSPARENT
THERMO PLASTIC• Dome shaped Level Indicator, transparent, with incorporated hex, which
enables to read Oil level an angle.• Material is transparent Polymide resin, which resists most chemicals, oil,
gasoline, fuel and a variety of solvents.• Maximum operating temperature: 100˚C.• Flat asbestos free, oil resistant seal.• Nm = Applicable maximum tightening torque.
• Socket style low profile threaded plug.• This low profile plug is made from reinforced Thermoplastic and provides an
excellent mechanical resistance at both low and higher temperatures. (Max. 110˚C.)• Flat asbestos free seal• For tightening torques (Nm) see table below.• Special plugs in Polymide IXEF 1022 are available for increased
mechanical torque and temperatures up to 150˚C. (see table Nm (IXEF)).
TCZKNURLED OIL FILL PLUG
TCZSKNURLED OIL FILL PLUG WITH BREATHER
HOLE• Threaded plug with knurled head in Thermoplastic material (Polymide
66) ensuring high mechanical resistance at both low and hightemperature (max. 100/110˚C). Excellent dimensional stability and shockresistant.
• ‘O’ ring seal or 70 shore rubber seal.• Available in standard black colour, red on request.• Style TCZ and TCZS have molded UNI fill symbol and the text “OIL”
molded on top.• Style TSZ has the UNI drain symbol molded on top.• The style TZCS incorporates a breather hole, located on the knurled rim
VANE AND FILTER• Hex head oil fill plug made from Thermoplastic material (Polymide 66),
ensuring high mechanical resistance at both low and highertemperatures. (max. 100/110˚C).
• This product offers excellent dimensional stability and is shock resistant.• Asbestos free flat oil resistant seal.• The plugs are marked with the UNI fill symbol and the word OIL, the
breather hole is located on the side of the hex, with a diameter of 2-3mm.• The incorporated oil dampening vane will reduce spillage when strong oil
movement in the container or reservoir takes place.• The Polyurethane foam filter prevents contamination from the ambient
atmosphere polluting the oil.
TMAALUMINIUM DRAIN PLUG WITH MAGNET
• HEX PLUG MANUFACTURED FROM ALUMINIUM 11S COMPLETE WITHASBESTOS FREE FLAT SEAL
• FITTED WITH PRESSED-IN CYLINDRICAL MAGNET• FITTED TO BASE OF TANKS TO REMOVE FERROUS PARTICLES• TEXT — MAGNETIC
Type ØD Ch A B PriceKMF14 1/4"BSP 18 13 9 £8.76KMF38 3/8"BSP 22 14 10 £10.79KMF12 1/2"BSP 27 14 10 £11.87
KMFMETAL FILLER PLUG WITH FILTER
• SINTERED METAL FILTER 50/60MICRON
• FIBRE ASBESTOS - FREE SEAL• FOUR BREATHER HOLES ARE
LOCATED UNDER THE HEX HEADPROVIDING AN ADEQUATE BREATHINGCAPACITY
• IDEAL FOR GEARBOXES ANDTRANSMISSION APPLICATIONS
AND BREATHER HOLE• Hex threaded plug with dipstick (diam. 4.5mm steel), material plug:
(Polymide 66) maximum temperature 100/110˚C.• Oil resistant seal. (‘O’ ring, 70 shore)• The model TCAS has a breather hole located in the side of the knurled
head, with a diameter of 2-2.5mm.• The standard dipstick is delivered in a 200mm length, on larger quantities
they can be manufactured to the customers specific length, and MIN-MAXnotches can be placed in the desired position.
DOUBLE BREATHER HOLE AND FILTER• Round headed Filler Breather, with vertical ribs for better grip. Oil
resistant seal. (‘O’ ring, 70 shore)• The Filler Breather is produced from Polymide 66, ensuring high
mechanical resistance at both low and higher temperatures. (maximumtemperature 100/110˚C)
• This product offers excellent dimensional stability and is shock resistant.• These Filler Breathers allow air passage at high volume, through the vents
located on the bottom of the head. They are recommended to be used insystems where a large amount of oil level changes take place in a shortamount of time, allowing the air to enter and leave the system without anyunwanted air pressure increase or decrease.
• Style TMDF has a standard Polyurethane foam filter (60 Micron) built in.This filter is located under the red lid, easy to remove, clean and reinstall.
TMDAFILLER BREATHER WITH
LARGE BREATHER HOLE AND DIPSTICK
TMDFAFILLER BREATHER WITH LARGE BREATHER
HOLE, DIPSTICK AND FILTER• The below Filler Breathers have the same characteristics as the models
TMD - TMDF, but are equipped with a dipstick.• The standard dipstick is 200mm in length.
TSFNEW VENT PLUG TO REDUCE OIL OIL DAMP ESCAPE• Filler Breather with easy grip vertical ribs, manufactured from
Thermoplastic material (Polymide 66). Maximum working temperature100˚C.
• These style Filler Breathers are produced in black with a red lid, with thetext “OIL”. On large orders a custom text or company logo is possible.
• A standard flat rubber seal is used , but a ‘O’ ring seal is available, bothin NBR 70 shore.
• Located under the lid is a Polyurethane foam filter (50 Micron) installed,which is easy to be cleaned once the lid is removed.
• The series TSF has a specially designed cavity which prevents oil fromescaping through the Breather holes when it is splashed in an upwarddirection, often occurring when there is a strong oil movement due torotating gears.
• The inside of the TSF features a conicalcavity which, due to its design entraps oilbut allows air to escape and enter (withinlimitations).
• These Filler Breather plugs are utilised onhydraulic power packs, oil tanks, gearreduction boxes, gearboxes or anyapplication where strong movementcauses splashing oil in or around theFiller Breather.
Type F D h1 h2 PriceTSF14 1/4” BSP 30 21 10 £4.85TSF38 3/8” BSP* 30 21 10 £5.31TSF12 1/2” BSP* 30 21 10 £5.70*On request available in NPT
TPFPRESS-FIT FILLER BREATHER WITH LARGE
BREATHER HOLE AND FILTER• Press-fit Filler Breather with easy grip vertical ribs.• These Filler Breathers are not threaded, but fit snugly into a pre-drilled
hole and seal by means of ‘O’ rings located on the stem. Holetolerances: -0 + 0.1mm.
• These Filler Breathers are produced from Thermoplastic Polymide 66which offers high mechanical resistance at both lower and highertemperatures (100˚C max).
• Seals: 2 Oil resistant ‘O’ Rings, NBR 70 shore.• The Filler Breather model TP/F has a large breathing capacity and is
applied where a high volume of air change takes place, in example,hydraulic systems that utilise high ratio hydraulic cylinders. They are notrecommended for usage on mobile equipment, where strong movementof the oil tank is present.
Type F D d h1 h2 h3 PriceTPFTPF18 18 36 23 17 5 10 £9.05TPF20 20 36 24 17 4 19 £10.00TPF26 26 41 28 17 4 21 £11.01TPF30 30 47 33 17 4 21 £13.05