Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1) Page 1 Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 1
Seamless and Secure Access (SSA)
Manual Configuration Guide
for Windows 7
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 2
1 Enable Wi-Fi
a) Please refer to your computer’s user manual to enable the Wireless (Wi-Fi) connection.
b) Please click on Start > Control Panel and switch View to Category before following the following instructions in this user guide
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 3
c) Click Start and then click Control Panel. In Control Panel, click on System and Security and then click on Administrative Tools. In Administrative Tools, click on Services and scroll to the bottom and make sure the WLAN AutoConfig service is started.
Note: If you are using a third-party Wi-Fi manager, e.g. Intel PROSet, ThinkVantage Acess Connections, etc., please disable it before following the instructions in this guide. Alternatively, you may use the third-party Wi-Fi manager to configure the settings stated in this guide. If you need help to use your third-party Wi-Fi manager, please refer to the instruction manual provided by the manufacturer.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 4
2 Connect to Wireless@SG via SSA
a) Click on Start and select Control Panel
b) Select Network and Internet.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 5
c) Select Network and Sharing Center.
d) Click on Set up a connection or network.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 6
e) Select Manually connect to a wireless network and click Next.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 7
f) Enter the following information:
Network name : Wireless@SGx
Security Type : WPA2-Enterprise
Encryption type : AES
Click on Next.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 8
g) Click on Change connection settings.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 9
h) Configure the following settings:
Choose a networking authentication method: Microsoft: Protected EAP (PEAP).
Remember my credentials for this connection each time I’m logged on: Check
Click on Settings.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 10
i) Configure the following Protected EAP properties:
Validate server certificate : Check
Connect to these servers: Uncheck
Trusted Root Certification Authorities: Go Daddy Class 2 Certification Authority
Enable Fast Reconnect: Uncheck
Click on Configure.
\
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 11
j) Uncheck Automatically use my Windows logon name and password (and domain if any)
k) Click OK twice to return to previous window
l) Click on Advance settings
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 12
m) Ensure Specify authentication mode: is checked, and select User authentication from the drop down box.
n) Click Save credentials. In the User name box, enter your Wireless@SG username followed by @domain format. In the Password box, enter your Wireless@SG password. Click OK to save credentials.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 13
o) Return to Network and Sharing Center. Click Connect to a network. A small window will appear. Select Wireless@SGx and click Connect. Note that you are able to see Wireless@SGx SSID only if you are in a Wireless@SGx hotspot.
p) You are now connected to Wireless@SGx
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 14
3 Uninstall SSA profile
Follow the steps below to remove the Wireless@SGx settings:
a) Click on Start and Select Control Panel.
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.1)
Page 15
b) Select Network and Internet.
c) Select Network and Sharing Center