BEST PERFORMANCE FOR BEST VALUE The SE500 is capable of inspecting the most demanding assemblies with 80cm²/second inspection speed. Not just simpler and faster, SE500 also offers uncompromised measurement accuracy and repeatability even at such high speeds. SE500 helps you achieve industry-leading volume accuracy, with its ability to inspect pad sizes down to 01005 component size (150 x 150 µm) while keeping up with the growing demands of increasing line speeds. As accurate volume measurement of each solder paste deposit plays a critical role, SE500 is designed to provide high quality solder joints in your SMT process in the most cost-effective way. SE500 ™ SOLDER PASTE INSPECTION SYSTEM CP CYBEROPTICS PERFORMANCE Best GR&R Highest Speed ATTRACTIVE COST OF OWNERSHIP A simplified yet robust design combined with calibration-free sensor technology makes SE500 a reliable, high-performance system while maintaining the most competitive cost of ownership in the industry. PROCESS OPTIMIZATION CAPABILITY With SE500 , you can optimize your screen printing process, fine-tune screen printer setup and monitor any process drifts. To enhance performance and provide more flexibility, SE500 is designed to support a blend of high speed and high resolution inspection modes within the same inspection program. Pattern of structured white light on PCB Quick Defect Detection Integrated sensor assembly with no moving parts Cross-section tools provide graphical profile of solder paste deposit 3-D image of solder paste deposit CP CP CP CP CP CP CP
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
BEST PERFORMANCE FOR BEST VALUEThe SE500 is capable of inspecting the most demanding assemblies with 80cm²/second inspection speed. Not just simpler and faster, SE500 also offers uncompromised measurement accuracy and repeatability even at such high speeds.
SE500 helps you achieve industry-leading volume accuracy, with its ability to inspect pad sizes down to 01005 component size (150 x 150 µm) while keeping up with the growing demands of increasing line speeds.
As accurate volume measurement of each solder paste deposit plays a critical role, SE500 is designed to provide high quality solder joints in your SMT process in the most cost-effective way.
SE500 ™
SOLDER PASTE INSPECTION SYSTEMCP
CYBEROPTICS
PERFORMANCE
Best GR&R
Highest Speed
ATTRACTIVE COST OF OWNERSHIPA simplified yet robust design combined with calibration-free sensor technology makes SE500 a reliable, high-performance system while maintaining the most competitive cost of ownership in the industry.
PROCESS OPTIMIZATION CAPABILITYWith SE500 , you can optimize your screen printing process, fine-tune screen printer setup and monitor any process drifts. To enhance performance and provide more flexibility, SE500 is designed to support a blend of high speed and high resolution inspection modes within the same inspection program. Pattern of structured white light on PCB Quick Defect Detection
Integrated sensorassembly with no moving parts
Cross-section tools provide graphical profile of solder paste deposit
50 x 50 mm (2.0 x 2.0 in.) 510 x 510 mm (20.0 x 20.0 in.) 100 x 127 x 139 cm
3.0 kg (6.6 lbs) 0.3 mm (0.01 in.) 5.0 mm (0.2 in.) 2.5 mm (0.10 in.) 3.0 mm (0.12 in.) 20.1 mm (0.78 in.) 25.4 mm (1.0 in.) 150 – 450 mm/sec (5.9 – 17.7 in./sec) Automatic
Maximum Inspection AreaField-of-View (FOV) X and Y Pixel Size @ High ResolutionX and Y Pixel Size @ High Speed 30 µm (1.2 mils) Paste Height Range 50 – 500 µm (2 – 20 mils) Height ResolutionMaximum Board WarpMaximum Pad Size in FOVMeasurement TypesMachine Interface SMEMA, RS232 & Ethernet Power RequirementsCompressed Air Requirements
508 x 503 mm (20.0 x 19.5 in.) 32 x 32 mm (1.26 x 1.26 in.) 15 µm (0.6 mils)
0.2 µm (0.008 mils) < 2% of PCB diagonals or max. of 6.35mm (0.25 in.) total 15 x 15 mm ( 0.6 x 0.6 in.) Height, Area, Volume, Registration, Bridge Detection
80.0 cm²/sec (12.3 in²/sec) 50.0 cm²/sec (7.6 in²/sec) 4 – 5 sec < 1%, 3 σ , on a Certification Target < 3%, 3 σ, on a Circuit Board
Gage R&R
SYSTEM SPECIFICATIONS
FUNCTIONAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
SE500 CP
188cm(74 in)
92cm(36 in)
127cm (50 in)
*Adjustable86-104cm
(34-41 in)
* To achieve the lowest conveyor height measurement of 83 – 96 cm (33 – 38 in), a customized conversion kit is available. Contact CyberOptics for more information.