SDZ Construction: 120mm Tank Cannon Inter-service Resident Range Safety Course (Intermediate)
Jan 15, 2016
SDZ Construction:120mm Tank CannonInter-service Resident Range Safety Course (Intermediate)
August 2003
120mm Ammunition
August 2003
Weapon:
Ammo Type:
Distance X:
Angle P:
Distance W:
Area A:
Area B:
Map Scale:
Map Sheet:
Map Series:
Map Edition:
Date:
Name:
Legend for 120mm Tank Cannon
August 2003
Constructing 120mm Tank Cannon SDZConstruct a 120mm tank cannon SDZ for that weapon firing the M830 HEAT-MP-T cartridge into steel.
Dimensions of the SDZ for this weapon system are given in DA-PAM 385-63, Chapter 12, Table 12-2.
First, plot the firing point, target, and then establish the gun target line.
August 2003
Plot the firing point.
Establish the gun target line.
Plot the target.
August 2003
From Table 12-2, find Distance X (steel).
Distance X =6589m (ˆ6600m)
Annotate Distance X on the legend. D
ista
nce
X
August 2003
At the firing point, measure 5° from the left and right of the gun target line.
5°
Draw tic marks as shown.
Dis
tan
ce X
August 2003
To establish the lateral limits of the Dispersion Area, draw a straight line from the firing position through each tic mark out to Distance X.
This completes the Dispersion Area.
5°
Dis
tan
ce X
DispersionArea
August 2003
For the Ricochet Area, on Table 12-5, find the measurement for Distance W (steel).
Distance W =600m
Dis
tan
ce X
Lightly draw lines perpendicular to the limits of the Dispersion Area. Dispersion
Area
August 2003
Draw tic marks at the measurement for Distance W on the lines just drawn.
Draw straight lines through the tic marks.
Dis
tan
ce X
DispersionArea
August 2003
On Table 12-2, find the Angle P.
Angle P = 12°
Draw tic marks.
At the firing point, measure 12° from the left and right limits of the Dispersion Area. D
ista
nce
X
12°
P PDispersionArea
August 2003
This completes the Ricochet Area.
Draw a straight line from the firing point through each tic mark just drawn.
12°
P P
Dis
tan
ce X
Annotate the Ricochet Area on the legend.
RicochetArea
DispersionArea
August 2003
Dis
tan
ce X
Dis
tan
ce X
Erase any unnecessary lines.
From the firing point, scribe an arc between the left and right limits of the Ricochet Area. Use Distance X as the radius.
RicochetArea
DispersionArea
August 2003
Erase any unnecessary lines.
From the firing point, scribe an arc between the left and right limits of the Ricochet Area. Use Distance X as the radius.
Dis
tan
ce X
RicochetArea
DispersionArea
August 2003
Lightly draw lines perpendicular to the limits of the Ricochet Area.
Draw tic marks at the measurement for Area A.
On Table 12-2, find the measurement for Area A.
Area A =1,125m(ˆ1,150m)
Dis
tan
ce X
RicochetArea
DispersionArea
August 2003
Draw straight lines through the tic marks.
Lightly draw a line extending the gun target line the measurement of Area B.
On Table 12-2, find the measurement for Area B.
Area B =1,125m(ˆ1,150m) D
ista
nce
XRicochetArea
DispersionArea
August 2003
Draw a tic mark at the measurement for Area B.
Place the needle of the compass at the firing point and scribe an arc through the tic mark between the limits of Area A.
25°
From the firing point, measure 25° to the right and left of the limits of the Ricochet Area.
RicochetArea
DispersionArea
August 2003
Dis
tan
ce X
25°
Area B
Area A
Draw tic marks.
From the firing point, draw straight lines out through the tic marks as shown.
This completes Areas A and B.
Erase any unnecessary lines.
RicochetArea
DispersionArea
August 2003
Dis
tan
ce X
Area B
Area A
Draw tic marks.
From the firing point, draw straight lines out through the tic marks as shown.
This completes Areas A and B.
Erase any unnecessary lines.
RicochetArea
DispersionArea
August 2003
Weapon: 120mm Tank
Ammo Type: M830 HEAT-MP-T
Distance X: 6589m (ˆ6600m)
Angle P: 12°
Distance W: 600m
Area A: 1125m (ˆ1,150m)
Area B: 1125m (ˆ1,150m)
Map Scale: 1:50,000
Map Sheet:
Map Series:
Map Edition:
Date:
Name:
Legend for 120mm Tank Cannon