anson M LEAD ACID BATTERY CHARGER HBC - 1110 / 1115 / 1120 12V Advanced Multi-Stage Battery Charger with MCU ◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa. ◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE Description Features This series of advanced battery chargers are designed to cover a wide range of battery capacities and battery types. The Micro-Processor Control allows for easy selective charging operations to ensure quick and full charge for your battery type. Smart and extensive fail safe protections plus the thermally controlled charging current make this charger dependable and durable even in adverse ambient conditions. There are essentially 5 charging stages: Soft Bulk, Bulk, Absorption, Float and Standby (power saving). In addition there is a manual or auto Equalization Charge for Flooded battery. The MCU constantly monitors the battery status at all times, it counts the days for auto-Equalization Charge, and days in both Float, Standby mode for auto-recycle charge to keep battery fresh even in long period of inactive service. The soft-ware based power conversion technology allows 2 specific charging profiles be programmed via the USB port from a PC. This user defined charging function is ideal for special charging requirement and other chemical type of battery such as lithium iron phosphate. • • • • • • MCU control software based adaptive 5 stage charging for Wet, LiFePo4, Gel, AGM, Calcium –Calcium lead acid battery. Selection of battery type & max. charging current either by optional remote panel or by PC . Model HBC -1140 and -1160 have two isolated charging terminal with separate voltage detect and total current detect capability. All other models have only one charging terminal. Optional remote control panel display of : voltage at each terminal, total current, Charging stage, total operation hours, max output set and fault type. Extensive protection for charger and battery: over charging voltage, charger over temperature, battery over temperature, cooling fan malfunction. Thermal decrease of charger output power to ensure safe operation temperature for the components in hot ambient environment . Optional Accessory: Remote Control Panel (HBR-3100)
2
Embed
SDC - 310 Switching Mode Step Up Converter Mode Step Up Converter ... conversion technology allows 2 specific charging profiles be programmed via the USB ... 12V - 16V 12V - 16V 15.5V
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ansonM DC - DC CONVERTERSDC - 310Switching Mode Step Up Converter
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Description
Features
This series of advanced battery chargers are designed to cover a wide range of battery capacities and battery types. The Micro-Processor Control allows for easy selective charging operations to ensure quick and full charge for your battery type. Smart and extensive fail safe protections plus the thermally controlled charging current make this charger dependable and durable even in adverse ambient conditions.
There are essentially 5 charging stages: Soft Bulk, Bulk, Absorption, Float and Standby (power saving). In addition there is a manual or auto Equalization Charge for Flooded battery.The MCU constantly monitors the battery status at all times, it counts the days for auto-Equalization Charge, and days in both Float, Standby mode for auto-recycle charge to keep battery fresh even in long period of inactive service.
The soft-ware based power conversion technology allows 2 specific charging profiles be programmed via the USB port from a PC. This user defined charging function is ideal for special charging requirement and other chemical type of battery such as lithium iron phosphate.
•
••
•
•
•
MCU control software based adaptive 5 stage charging for Wet, LiFePo4, Gel, AGM, Calcium –Calcium lead acidbattery. Selection of battery type & max. charging current either by optional remote panel or by PC .Model HBC -1140 and -1160 have two isolated charging terminal with separate voltage detect and total currentdetect capability. All other models have only one charging terminal. Optional remote control panel display of : voltage at each terminal, total current, Charging stage, totaloperation hours, max output set and fault type.Extensive protection for charger and battery: over charging voltage, charger over temperature, battery overtemperature, cooling fan malfunction.Thermal decrease of charger output power to ensure safe operation temperature for the components in hotambient environment .
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Specifications
FeaturesDescription
Input Voltage Range
Output Voltage
Continuous Output Current
Ripple & Noise (r.m.s.)
Maximum Output Current
Load Regulation (0-100% load)
Line Regulation (10-15V variation)
Efficiency
Protection Devices
Cooling System
Indicators
Output Connection Type
Input Connection Type
e-Mark Approvals
Input Fuse Type
Dimensions (WxHxD)
Weight
Accessory
Models SDC - 310
8A
10A
300mV
150mV
10 - 16VDC
28VDC ±0.5VDC
<5mV
>88%
Overload, Short Circuit
Natural Convection
Power on LED
One set banana screw on type and one set philips screw type
Cable
e11 02 2981
Standard Car Blade Fuse
156x57x130 mm 6.1x2.2x5.1 inch
1 kg 2.2 lbs
Mounting Bracket
This series of DC-DC Switching Mode Converters are built to meet the high current applications at 28V DC. In addition to the high efficiency, the low profile construction makes use of the heat sinks as main body of the robust, rugged housing of the unit. The OVP (Over Voltage Protection) protects sensitive electronic equipment.
•••••••
High efficiency 88%High power densityOutput over voltage protectionShort circuit and overload protectionLED power on indicatorEMC INTERFERENCE IMMUNITYPower ON - OFF Switch
Optional Accessory:Remote Control Panel (HBR-3100)
DC - DC CONVERTERSSDC - 221513.8VDC Isolated Step Down Converter
ansonM ansonM
◘ All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.◘ SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Specifications
FeaturesDescription
Input Voltage Range
Output Voltage
Continuous Output Current
Ripple & Noise (r.m.s.)
Load Regulation (0-100% load)
Line Regulation (22.5-30V Variation)
Efficiency
Protection Devices
Cooling System
Indicators
Output Connection Type
Input Connection Type
CE Approvals
Input Fuse Type
Dimensions (WxHxD)
Weight
Accessory
Models SSDC - 2215
15A
100mV
100mV
22 - 30VDC
13.8VDC
>86%
Overload, Short Circuit
Natural Convection
Power ON LED
Terminal
Cable
Standard Car Blade Fuse
156x57x127 mm 6.1x2.2x5 inch
1.2 kg 4.4 lbs
Mounting Bracket
EN 55022
<10mV
This input and output isolated DC-DC voltage reducer is designed for negative, positive and floating ground dc system and loads that requires galvanic isolation between the input source and the active loads. The switching mode conversion results high operation efficiency with low standby current. The power on off switch provides further conservation of energy for long period of inactive operation.
••••••••
Output and input isolated Low standby current High Efficiency 86%Protection against transient voltagesEMC interference immunityOverload & short circuit Protection LED power on and fault indicator Supplied with Mounting brackets.
No Load Input Current
Full Load Input Current
100mA
10A
Housing Material Anodized Aluminum
LEAD ACID BATTERY CHARGERHBC - 1110 / 1115 / 112012V Advanced Multi-Stage Battery Charger with MCU
Recommended Battery Capacity Range
Included Accessories (spare fuse, temperature sensor)