Figure 2 Figure 1 Locked Unlocked Extend Lock 2 Push 1 Press GSMedicalUSA.com 866.904.8144 5200 SOQUEL AVE, STE 104 SANTA CRUZ, CA 95062 U.S.A. 3 Universal Tool US114-9009 Tower US114-9001 Instruments Needed: Screw, Tower & Driver Assembly Tower Assembly – Verify that the tower tangs are fully extended. The silver knob (fig. 1) at the top of the instrument controls the tangs extension. Carefully engage the polyaxial screw head to the tangs on the distal end of the tower ensuring that the tangs match the holes on the screw and slide sleeve down till the tangs are fully retracted into the tower. Use the Universal Tool to lock the tower. To verify that the screw is fully locked, ensure that the screw cannot be removed by pulling it away or rotating it. Attach the preferred handle to the screw driver. Insert the screw driver through tower and engage the tip into the recessed feature of the screw. Push and engage the screwdriver to the screw then rotate the silver screwdriver knob (fig. 2) clockwise to lock.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Figure 2Figure 1
LockedUnlocked
Extend
Lock
2 Push
1 Press
GSMedicalUSA.com
866.904.8144
5200 SOQUEL AVE, STE 104SANTA CRUZ, CA 95062 U.S.A.
3
Universal Tool US114-9009
Tower US114-9001
Instruments Needed:
Screw, Tower & Driver Assembly
Tower Assembly – Verify that the tower tangs are fully extended. The silver knob (fig. 1) at the top of the instrument controls the tangs extension. Carefully engage the polyaxial screw head to the tangs on the distal end of the tower ensuring that the tangs match the holes on the screw and slide sleeve down till the tangs are fully retracted into the tower. Use the Universal Tool to lock the tower.
To verify that the screw is fully locked, ensure that the screw cannot be removed by pulling it away or rotating it.
Attach the preferred handle to the screw driver. Insert the screw driver through tower and engage the tip into the recessed feature of the screw. Push and engage the screwdriver to the screw then rotate the silver screwdriver knob (fig. 2) clockwise to lock.
Related Documents
