1141 1142 Cooling Components ②Joints ・Hoses Cooling Inside of Mold Plastics 2012 Non JIS material definition is listed on P.1359-1360. Delivery days depend on subsidiary. P.45 SCREW PLUGS WITH O-RING / TAPERED SCREW PLUGS / SEALING TAPE CAPS FOR COOLING PLUG / FLOW CHECKERS FOR COOLING WATER / MARKER RINGS MSWM (Screw plug with O-ring) T L M H B t O-ring R Fluorocarbon resin (PTFE) H B t T L O-ring JIS No. Recommended Tightening Torque N・m{kgf・m} M×Pitch Part Number U/Price Type M 1~9 16 5 3.5 4 7 P10 15.7 { 1.6} 8×1.0 MSWM 8 19.5 4 8 P12.5 19.6 { 2.0} 10×1.0 10 21 6 5 12 P14 27.5 { 2.8} 12×1.5 12 23 P16 39.2 { 4.0} 14×1.5 14 25 8 6 P18 63.7 { 6.5} 16×1.5 16 27 P20 78.4 { 8.0} 18×1.5 18 32.5 10 6.5 5 14 P22.4 112.7 {11.5} 20×1.5 20 35 P25 137.2 {14.0} 22×1.5 22 38 12 7.5 P28 201.0 {20.5} 24×1.5 24 40 16 P30 245.0 {25.0} 27×2.0 27 V The O-ring conforms with JIS Class 1 B2401 (butadiene acrylonitrile rubber). Its usable temperature range is -30℃~80℃ Part Number MSWM 10 Part Number JST8 - 5 Part Number MSWT J MSWT 4 ■Quantity discount rate X P.45 Quantity 1~9 10~19 20~29 30~39 Rate - 5% 10% 15% VTo be quoted on price & lead time above Max. Q'ty. ■Quantity discount rate X P.45 Quantity 1~9 10~19 20~49 50~100 Rate - 5% 10% 15% VTo be quoted on price & lead time above Max. Q'ty. V Stock availability depends on subsidiary. X P.45 V Stock availability depends on subsidiary. X P.45 V Stock availability depends on subsidiary. X P.45 MSWT (Tapered type) MSWTS (Tapered type, stainless steel) B 16 1 L D R(PT) a: Standard diameter position Thread JIS B 0203 tapered thread for tubing R(PT) *The thread on MSWT No. S is ANSI B2.2 tapered thread for American tubing (NPT). D a V No. of threads Pitch L B R(PT) Part Number MSWT MSWTS U/Price U/Price Type No. 1~99 100~199 1~99 100~199 7.723 0.45 28 0.91 6 4 1/16 MSWT *J 7.779 0.47 27 0.94 6.4 4 1/16 *S 9.728 0.45 28 0.91 7 5 1/8 MSWT MSWTS (Stainless steel) 1 13.157 0.7 19 1.34 8.9 6 1/4 2 16.662 10 8 3/8 3 20.955 0.9 14 1.81 12 10 1/2 4 26.441 14 14 3/4 6 33.249 1.1 11 2.31 16.5 17 1 8 V No. of threads per 25.4mm. *The thread on MSWT No. S is ANSI Standard, MSWT No. J is JIS Standard. JST8-5 (Sealing Tape) JST13-15 V To be quoted on price & lead time above Max. Q'ty. ■JST8-5 is narrow and prevents from cutting protrusion when winding around screw plugs and such. Heat resistance temperature W (width) L (length) (meter) t (thickness) Part Number U/Price 1~9 260℃ 8mm 5m 0.1mm JST 8-5 13mm 15m JST13-15 ■ Caps for Cooling Plugs ■ Flow Checkers for Cooling Water ■ Marker Rings FLM FLM-F MOLDCAP (29) φ 20 φ 17.6 R Polypropylene resin (PP) Part Number Color U/Price 1~9 sets (10) set MOLDCAP B (Blue) R (Red) ■List of applicable plugs for MOLDCAP (1Caps for cooling plug) Category Appl. plugs Part Number Mold Coupler Series KPM JPS High Coupler Series for Cooling Pipe KHPM JPL Joint Plugs JPJ Hose Nipples NPW ■ Please install this plugs on the tips of the coupler, plug and hose nipple when exchanging molds. The amount of cooling water for floor-wetting can be reduced. V Please use it if you want to prevent cooling water from leaking when exchanging molds. Please note that it cannot stop the cooling water flow completely. V After exchanging the mold, take off the cap for cooling plug and take away the water remains in mold. Please note that it's necessary to take away the water for the purpose of rustproofing. Part Number MOLDCAP-B Part Number FLM 3 ■Quantity discount rate X P.45 Quantity 1~9 10~199 Rate - 5% V To be quoted on price & lead time above Max. Q'ty. L=80 33 H1 ② RC(PT) ① RC(PT) H2 Flow direction of cooling water L=89 33 H1 ② RC(PT) ① RC(PT) H2 Flow direction of cooling water R Main body Brass (C3604) Scale pipe PC (Polycarbonate resin) Usage temperature range 10℃~60℃ R Aluminum (A5052P) Allen side ① Rc(PT) ② Rc(PT) L Part Number U/Price Slide Unit Price H1 H2 Type No. 1~9 10~199 200~399 400~600 23 23 3/8 3/8 80 FLM 3 26 89 FLM-F V Stock availability depends on subsidiary. X P.45 JMR D d 0.5 d D Part Number Color U/Price 1~9 sets Type No. (A set of 10 sheets) 10 20 JMR 1 B (Blue) G (Green) R (Red) K (Black) 12 2 17 25 3 Maximum usage pressure kPa{kgf/cm 2 } 500 { 5.0} Withstanding pressure kPa{kgf/cm 2 } 800 { 8.0} Recommended maximum tightening torque N・cm{kgf/cm 2 } 1195 {122} Max. flow rate 18ℓ/min. ● Characteristics of simplified flow checker for cooling water ・The flow rate of cooling water can be confirmed with the scale, and it becomes a standard at the cooling condition setting by the workers. ・Flow control valve is built-in, which allows free molding conditioning for each machine. ・Easy maintenance due to simple structure. ・Screw tightening becomes easier in mold installation due to rotary. (Only FLM-F) Marker Rings ■ Use the marker ring to identify the type and flow direction of fluid. Part Number - Color JMR 1 - R V Stock availability depends on subsidiary. X P.45 ■Quantity discount rate X P.45 Quantity 1~9 10~19 20~49 50~100 Rate - 5% 10% 15% V To be quoted on price & lead time above Max. Q'ty. R S45C Q 32~42HRC Thread~JIS B0207 S Black Oxide (Fe3O4) MSWT MSWTS R SCM435 Q 32~42HRC S Black Oxide (Fe3O4) R SUSXM7 1 V Delivery days depend on subsidiary. X P.45 V FLM is scheduled to be discontinued in April 2011. Quotation Quotation Quotation Quotation Quotation Quotation Quotation Quotation Quotation Quotation Quotation Quotation V Non JIS material definition is listed on P.1359 - 1360