SCRAPER CONVEYOR - ForglassThe scraper conveyor consists of the main following parts: Drive station Tensioning station Intermediate module Chain with scrapers Table for glass return

Technical folder

SCRAPERCONVEYOR

1 forglass

ABCDEFG

The scraper conveyor consists of the main following parts:

Drive station

Tensioning station

Intermediate module

Chain with scrapers

Table for glass return

Additional elements

STRUCTURE OF THE CONVEYOR

TECHNICALSPECIFICATIONS

DRIVESTATION

INTERMEDIATEMODULES

TENSIONINGSTATION

Electrical control systems

Drive shaft assembled on two barrel bearings/clamping sleeves

Chain wheel with hardened flanks

Steel casing made of steel plate and weldedbeams on the bottom and side walls

Chain drive transmission/planetary gear motor

Covering of drive chain

Bottom of the station is made of molten basaltplates 30 mm thick

23

45

1

Shaft assembled on two barrel bearings/clamping sleeves

Chain wheel with hardened flanks

Slide Gate

Sliding bars for scrapers

Tensioning system

Protection covering

Steel casing made of steel plate and weldedbeams on the bottom and side walls

Bottom of the station is made of moltenbasalt plates 30 mm thick

234

567

8

1

2forglass

3 forglass

Steel casing made of steel plate and welded beams on the bottom and side walls

Sliding bars for scrapers

Strut beam

Bottom of the station is made of moltenbasalt plates 30 mm thick

The conveyor is equipped with chain made of forg-

ings with flat bars welded on edges. The forging

hardness is approx. 60 HRC. The flat bars have

hard facing structure on the top and the bottom.

Each scraper is connected by a hardened pin and

self-locking nuts.

CINTERMEDIATE MODULE

234

DCHAIN WITH SCRAPERS

1

Table is made of special steel type plates assembled under

the higher chain level. Table is used for return the cullet from

drive station area and drop it to the molten basalt plates

level.

ETABLE FOR GLASS RETURNLENGTH APPROX. 10 M

4forglass

Variable frequency, adjustable by inverter

FELECTRICAL CONTROL SYSTEMS

Star-delta starter (in case of emergency)

Direction changing possibility

Water temperature measure

Automatic system of water dosing (optional)

Monitoring of chain operation with contactlesslimit switch

Remote controlling possibility

LED/Horn emergency signalization

Protective covering on the top of the conveyormade from perforated sheet plate

Protective covering of the chain onthe inflection point of the conveyor

Emergency trip (rope) switches with equipment

GADDITIONAL ELEMENTS

ABCDEFGHI

5 forglass

6forglass

SAFETY

THIGHTNESS

FUNCTIONALITY

RELIABILITY

HIGH QUALITY MATERIALS

SIMPLICITY

CAPACITY

All the above constructions ensure the highest quality of execution:

IMPECCABLEEXECUTION

HEAD OFFICE

Forglass Sp. z o.o.

32/1 Tadeusza Kościuszki Street30-105 Kraków, Poland

+48 12 352 422 22

[email protected]

www.forglass.eu

PRODUCTION PLANT

33 Botaniczna Street42-260 Kamienica PolskaZawada near Częstochowa, Poland

KrakówHEAD OFFICE

CzęstochowaPRODUCTION PLANT

TunisSUBSIDIARY

ParisSUBSIDIARY

LeedsSUBSIDIARY

COMPLETE SOLUTIONSFOR GLASS FACTORIES

PragueSUBSIDIARY