SCION XB 2008 - SUBWOOFER ENCLOSURE Preparation Page 1 of 16 pages PPO Issue: 04/12/08 Part Number: NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents – 1 Item # Quantity Reqd. Description 1 3 Foam tape 76.2mm x 25.4 mm 2 12 8 “ Lock Ties 3 2 6 mm x 14 mm bolt 4 1 6 mm Serrated Hex Nut 5 1 8 mm Serrated Washer 6 1 Stud Mounting Bracket 7 3 6 mm Lock Washer 8 1 Mounting Nut 6 mm 9 2 Angle Bracket 10 Additional Items Required For Installation Item # Quantity Reqd. Description 1 1 Roll of masking tape 2 Recommended Tools Personal & Vehicle Protection Notes Safety Goggles Seat Covers Floor Protectors Special Tools Notes None Installation Tools Notes Ratchet Extension Sockets 10 mm, 12 mm, 14 mm Torque Wrench Side Cutter Nylon Panel Removal Tool e.g. Panel Pry Tool #1 Toyota SST # 00002-06001-01 Drill Drill Bit 8 mm, 10 mm Hole Saw 1.5 ” (38 mm) Allen Wrench 8 mm Open Faced Wrench 10 mm, 8mm General Applicability Recommended Sequence of Application Item # Accessory 1 Subwoofer 2 Cargo Net 3 *Mandatory Vehicle Service Parts (may be required for reassembly) Item # Quantity Reqd. Description 1 2 3 Legend Special Chemicals Notes 3 MTM Prep Solvent 70 STOP: Damage to the vehicle may occur. Do not proceed until process has been complied with. OPERATOR SAFETY: Use caution to avoid risk of injury. CAUTION: A process that must be carefully observed in order to reduce the risk of damage to the accessory/vehicle and to ensure a quality installation. TOOLS & EQUIPMENT: Used in Figures calls out the specific tools and equipment recommended for this process. REVISION MARK: This mark highlights a change in installation with respect to previous issue.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SCION XB 2008 - SUBWOOFER ENCLOSURE Preparation
Page 1 of 16 pages PPO Issue: 04/12/08
Part Number: NOTE: Part number of this accessory may not be the same as
the part number shown.
Kit Contents Item # Quantity Reqd. Description
1 1 Subwoofer enclosure
2 1 Wire Harness
3 1 Paper Template
4 1 Plastic Drill Template
5 1 Hardware Bag
Hardware Bag Contents – 1 Item # Quantity Reqd. Description
1 3 Foam tape 76.2mm x 25.4 mm
2 12 8 “ Lock Ties
3 2 6 mm x 14 mm bolt
4 1 6 mm Serrated Hex Nut
5 1 8 mm Serrated Washer
6 1 Stud Mounting Bracket
7 3 6 mm Lock Washer
8 1 Mounting Nut 6 mm
9 2 Angle Bracket
10
Additional Items Required For Installation Item # Quantity Reqd. Description
1 1 Roll of masking tape
2
Recommended Tools
Personal & Vehicle Protection
Notes
Safety Goggles
Seat Covers
Floor Protectors
Special Tools Notes None
Installation Tools Notes Ratchet
Extension
Sockets 10 mm, 12 mm, 14 mm Torque Wrench
Side Cutter
Nylon Panel Removal Tool e.g. Panel Pry Tool #1 Toyota SST # 00002-06001-01
Drill
Drill Bit 8 mm, 10 mm
Hole Saw 1.5 ” (38 mm)
Allen Wrench 8 mm
Open Faced Wrench 10 mm, 8mm
General Applicability
Recommended Sequence of Application Item # Accessory
1 Subwoofer
2 Cargo Net
3
*Mandatory
Vehicle Service Parts (may be required for reassembly)
Item # Quantity Reqd. Description
1
2 3
Legend
Special Chemicals Notes 3 MTM Prep Solvent 70
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY: Use caution to avoid risk of
injury.
CAUTION: A process that must be carefully observed
in order to reduce the risk of damage to the accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT: Used in Figures calls out the
specific tools and equipment recommended for this process.
REVISION MARK: This mark highlights a change in
installation with respect to previous issue.
SCION XB 2008 - SUBWOOFER ENCLOSURE Procedure
Page 2 of 16 pages PPO Issue: 04/12/08
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should
follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:-
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).