Sciemetric EDGE 412 Dual Carrier · The Sciemetric EDGE 412 Dual Carrier accomodates two EDGE 400 modules in a fanless IP65-rated enclosure that is ready to deploy in harsh industrial

Product Specifications

Sciemetric EDGE 412 Dual Carrier

The Sciemetric EDGE 412 Dual Carrier accomodates two EDGE 400 modules in a fanless IP65-rated enclosure that is ready to deploy in harsh industrial environments. Communications and power are provided to the carrier by a single Power over Ethernet (PoE) connection, greatly simplifying wiring and setup. It features a 6 line synchronization bus for modules to share real-time clocking and data.

Innovative packaging makes it easy to distribute intelligence across the plant

Highlights• 2 slots for Sciemetric EDGE modules• Simplified power and network connections with single

PoE cable• Type 1 PoE powered device (<13 W)• Hot swap modules• 6 synchronization bus lines • Built-in mounting brackets for wall mounting or optional

DIN rail mount• Real time clock for precise time and date stamp

Sciemetric EDGE 412 Dual Carrier. Modules sold separately.

2 | Sciemetric EDGE 412 Dual Carrier Product Specifications

One Tool for Management, Setup and AnalysisSciemetric Studio offers comprehensive capabilities for monitoring and control of industrial applications. Manage Sciemetric EDGE Systems through discovery, sensor calibration, application deployment, and software updates. Manage applications through configuration of tasks, features, parameters and variants. Leverage continuous improvement through data-driven insight with analytics such as feature, waveform and image trending, correlations and statistical reports.

Technical SpecificationsGENERAL

• Dimensions (HxWxD): 102 mm x 36 mm x 180• Weight: 560 g• Operating Conditions:

- Humidity: 10 to 90% RH, non-condensing (IEC 60068-2-56) - Shock: 150 m/s2 per IEC 60068-2-27 Table A.2 - Vibration: IEC 60068-2-65 spectrum A.1 Category 3 - Case Temperature: 0-55 °C (for example ambient temperatures please see chart under Mounting)

• Pollution degree: 2 maximum• Maximum altitude: 2000 m• Approvals: CE, cNEMKOus• Ingress protection: IP65• Cooling: Fanless• Status LEDs: Power and Network Activity• Real Time Clock

MODULE SLOTS

• Slots: 2• Voltage: 12 VDC• Current: 750 mA MAX• Ethernet: 100 BASE-TX• Hot swap: Yes• Sync bus lines: 6 lines 1:1 between modules• Slot ID Information: model, serial number, slot, hardware

revision• Chassis ground: #6-32 screw• Fastener screw torque: 2-4 in-lbs

POWER OVER ETHERNET

• Typical: 2 W with no modules• Maximum: 12.95 W

The Sciemetric EDGE Platform Sciemetric EDGE is a universal industrial analytics platform to help you perfect your process in record time. This distributed data analytics system removes barriers to collecting data, driving productivity improvements and cost savings.

The platform performs digital signal processing and signature analysis to offer in-depth insight into the performance, reliability and repeatability of a broad range of applications. Processing, analytics and control functions are remotely configurable, giving you a centralized management of your distributed operations. It provides industrial operations with a sophisticated, exciting, new way to monitor a process, perform real-time pass/fail control, and gain the visibility needed to optimize and control the overall process.

3 | Sciemetric EDGE 412 Dual Carrier Product Specifications

Mounting InformationThe Sciemetric EDGE 412 can be wall-mounted (standard) or DIN rail-mounted (optional). Thermal performance varies with mounting, air flow and module power consumption. Typical maximum ambient temperatures with two modules installed are as follows:

Installation Typ Max Ambient Temperature

Desk 38 °C

DIN mount 43 °C

Machine mount 43 °C (conductive plate)

Forced Convection 52 °C

Wall Mount

DIN Rail Mount

35.9

78.7 102

180

128

6.91/4" UNC MAX 71

36

18

9

#6-32chassis terminal

M12 X-code receptaclePoE

WALL MOUNT / MACHINE MOUNT (WITH 400 MODULE DETAILS)REVISIONS

REV. DESCRIPTION DATE APPROVED1.00 First Draft 2/26/2019

2.00 Added 3D exploded Wall-mount and DIN mount views 2019-09-18

D

C

B

AA

B

C

D

SCALE: 1:2 SIZE: B

DRAWN BY:

MODEL BY:

THIRD ANGLE PROJECTION

UNSPECIFIED TOLERANCES:

FRACTIONS1/32

DECIMALS0.X 0.050

0.XX 0.0100.XXX 0.005

MATERIAL:

WEIGHT (lbs):

NA

12345678

8 7 6 5 4 3 2 1

SHEET 1 OF 5

REF. MODEL:

10400-0431-0M12-ASSEMBLY

PROJECT CODE :

DRAWING #:

10400-0412-0M12 Mounting Information

ANGLES 1°

The information contained in this drawing is the sole property of Sciemetric Instruments Inc. It is to be used by others for the sole purpose it has been provided. This drawing may not be copied or reproduced, nor may its contents be disclosed to others, without the express written consent of Sciemetric Instruments Inc.

Sciemetric Instruments Inc.CHECKED BY:

TITLE:

REV:

FINISH:

DIMENSIONS IN INCHES

INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.5M-1994

ITEM# REVISION FLAG NOTE

Shee

t Tem

plat

e: B

_size

-IN-s

ciem

etric

-SW

DW

G S

heet

_R6.

sldd

rt

2.00

NA

2.718

etiennep,

400

10400-0412-0M12

-,

-,

3/8/2016

-

2019-08-02

-

65

81to front of

blank module

121

98to front of

10400-04xx-0M12modules

shown with provided 1m cable.Cable dimensions and bend radii may vary.

B

54From back of DIN rail

A

DIN MOUNT

D

C

B

AA

B

C

D

SCALE: 1:2 SIZE: B

DRAWN BY:

MODEL BY:

THIRD ANGLE PROJECTION

UNSPECIFIED TOLERANCES:

FRACTIONS1/32

DECIMALS0.X 0.050

0.XX 0.0100.XXX 0.005

MATERIAL:

WEIGHT (lbs):

NA

12345678

8 7 6 5 4 3 2 1

SHEET 2 OF 5

REF. MODEL:

10400-0431-0M12-ASSEMBLY

PROJECT CODE :

DRAWING #:

10400-0412-0M12 Mounting Information

ANGLES 1°

The information contained in this drawing is the sole property of Sciemetric Instruments Inc. It is to be used by others for the sole purpose it has been provided. This drawing may not be copied or reproduced, nor may its contents be disclosed to others, without the express written consent of Sciemetric Instruments Inc.

Sciemetric Instruments Inc.CHECKED BY:

TITLE:

REV:

FINISH:

DIMENSIONS IN INCHES

INTERPRET DRAWING IN ACCORDANCE WITH ASME Y14.5M-1994

ITEM# REVISION FLAG NOTE

Shee

t Tem

plat

e: B

_size

-IN-s

ciem

etric

-SW

DW

G S

heet

_R6.

sldd

rt

2.00

NA

2.718

etiennep,

400

10400-0412-0M12

-,

-,

3/8/2016

-

2019-08-02

-

[email protected]

REV 1, OCTOBER 2019 – PRINTED IN CANADA

© 2019 Sciemetric, Sciemetric EDGE and any related marks are trademarks or registered trademarks of Sciemetric Instruments Inc. All other trademarks are the property of their respective companies. All rights reserved. No part of this publication may be reproduced without the prior written permission of Sciemetric Instruments Inc. While every precaution has been taken in the preparation of this document, Sciemetric Instruments ULC. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Specifications subject to change without notice.

Other

Item Part number

Antaira 8 port Industrial PoE network switch, 12 to 36 VDC supply required 10400-AS0A-0008

Ordering InformationProducts

Item Part number

Sciemetric EDGE 412 Dual Carrier, Power Over Ethernet, X-Code M12,includes 1m X-code to RJ45 cable

10400-0412-0M12

DIN Rail Mount for Model 412 Carrier 10400-AM0A-000A

Model 400 – Blank Module, required if a single System 400 module is used in a 412 10400-0400-0001