SCHOOL Furniture

SCHOOL Furniture

1

SCHOOL Furniture

2

3

INTRODUCTIONThe TM Furniture is motivated on providing school designed to invite students and encourage them to work individually or together in gathering information, exploring ideas and expressing what they’ve learned through any number of media, whether it’s live presentation with visual aids, written report or poster. The starting point for a successful design is to break the space into different zones that support different parts of the learning process or learning modalities.

Providing the facility that can provide them;

• Learning Area• Study Area• Book/Media Storage and Display

Each of these areas supports a different type of learning activity.. To do this, it offers a relaxing environment where students can open up and exchange ideas.

This could apply to the entire space, but should be addressed in the planning phase to determine which areas might be dedicated. Students look for information in the Commons. Effective and imaginative book and media storage and display areas can make the search faster and more enjoyable.

TM Furniture Industry offers integral solution that comfort, design and function creating environments that cover every need. With years of experience back the quality of our products made to completely satisfy every furniture, archive, and consultation need. As the shelves which to conceive spaces from shelving is made possible simultaneously employing the combination of such important factor as personalization, organization, classification and administration of material.

4

TABLE OF CONTENTS5STUDENT CHAIR

7AGIRO SWING PLASTIC

8AGIRO SWING WOOD

9AGIRO-TURN PLASTIC & WOOD

10MIZAR 1

11MIZAR 2

15STUDENT TABLE

16BANCO

18PLANO

19TEACHER TABLE

20MAESTRO

24TONO

25STUDENT’S COMPUTER TABLE

26ESPACE

27TONO

28K2 CANTILEVER LEGS

30K2 FOUR LEGS

33TEACHER’S COMPUTER TABLE

34ESPACE

35TONO

36K2 CANTILEVER LEGS

37K2 FOUR LEGS

39MOVE TABLE

40FLEXI

42PILER

47SEGMENT 60° - 90°

51LITE

52WAVE

56PENTA

61PUZZLE

64ACTIVITY CHAIR

65MOVE BOX

73TRAY STORAGE

86WOODEN TRAY STORAGE

89POWER TRAY

91TRAY STORAGE UNIT

95LIBRARY SHELVING

107BOOK TROLLEY

119LIBRARY COUNTER

120DARRO

123DEVA

127MODULAR SOFA SEATING

130MODULAR SEATING 2

133MAGNETIC MARKERBOARDS

139LAMINATE SELECTION

140POWDER COATING COLOR SELECTION

5

STUDENTCHAIR

6

STUDENT CHAIRSeating is unique as a fingerprint. Students sit in hundreds of different positions. Tm Furniture Industry is aiming to provide a wide range of chair with a right size for each classroom seating that supports healthy posture and decrease moving about restlessly. Our selection of chair allows some movement on the part of the student can promote learning.

7

AGIRO SWING PLASTICStudent chair with elastic plastic seat for dynamic as well as ergonomic sitting, available in different colors and sizes

Powder-coated cantilever frame (made from Ø 22/3 mm respectively Ø 22/2.5 mm steel pipes). The chair’s design enables it to move with the user forwards, as for example when writing or reading, as well as backwards, for example when users are merely listening.

The seat is available in different colors (yellow, green, blue, red, orange and grey) and features an elliptic grip hole. The seat is made from 100% carbon-fiber strengthened polypropylene which makes it extremely durable against scratches. In order to make sitting as comfortable as possible, the seat has been designed in an ergonomic way and has been given a specially tailored backrest, it also allows for users to sit in an inverted position, facing the backrest.

Size 3 4 5 6 7Chair height 34 cm 38 cm 42 cm 46 cm 51 cm

For Table height 58 cm 64 cm 70 cm 76 cm 82 cm

8

AGIRO SWING WOODCantilever Chairs for Students in different Sizes with seat-shell made from beech-plywood.

Powder-coated cantilever frame (made from Ø 22/3 mm respectively Ø 22/2.5 mm steel pipes). The chair’s design enables it to move with the user forwards, as for example when writing or reading, as well as backwards, for example when users are merely listening.

The seat is made from 10mm of ergonomically formed plywood; the backrest supports the user backbone in an ergonomic way that assures a maximum of comfort. Furthermore the backrest has been given a specially tailored form to allow users to sit in an inverted position, facing the backrest.

The chair’s surface has been coated with a special anti-slide lacquer.

Size 2 3 4 5 6 7Chair height 30 cm 34 cm 38 cm 42 cm 46 cm 51 cm

For Table height 52 cm 58 cm 64 cm 70 cm 76 cm 82 cm

9

AGIRO-TURN PLASTIC & WOOD- On castor or glide

- Available in plastic colors: red, orange, green, yellow, blue or grey and wood beech finish

Frame: consisting of an aluminum star-foot with easily exchangeable gliders. Seamlessly height-adjustable by means of a gas spring mechanism.

Seat shell: Made from 100% carbon-fiber strenthtened polypropylene which makes it extremely durable against scratches. In order to make sitting as comfortable as possible, the seat has been designed in an ergonomic way and has been given a specially tailored backrest, it also allows for users to sit in an inverted position, facing the backrest.

All the materials are 100% recyclable. And also available with a 3D rocker mechanism:

Chair Details Legs w/ Castor Legs w/ GlidePlastic Seat Shell w/o cushion Seat height : 34 - 44 cm 3290K-S 3295K-S

Plastic Seat Shell w cushion Seat height : 35 - 45 cm 3290KP-S 3295KP-SWooden Seat Shell w/o cushion Seat height : 34 - 44 cm 3290H-S 3295H-S

Wooden Seat Shell w cushion Seat height : 35 - 45 cm 3290HP-S 3295HP-S

10

MIZAR 1MATERIALS.• Monocoque in polypropylene.

• Metallic 4-legs structure chromed.

Easy to clean the product using a soft cloth slightly dampened with water and neutral liquid detergent, and immediately dry with a soft dry cloth. Just do not use alcohol or detergents that contain, even in small amounts, acetone, trichloroethylene and ammonia (solvents in general). All these operations must be done carefully to avoid scratching the surfaces. Avoid at all the use of abrasive products or cloths with hard fibers.

Do not keep surfaces remaining in contact with water or other liquids, even for brief periods.

Exposure to direct sunlight may alter the color of the lacquer.

11

MIZAR 2MATERIALS.Monocoque in polypropylene injected with air molding technology5 spokes swivel base, in nylon.Adjustable seat to gas lift.Soft trimmed twin castors.

The product using a soft cloth slightly dampened with water and neutral liquid detergent, and immediately dries with a soft dry cloth. Do not use alcohol or detergents that contain, even in small amounts, acetone, trichloroethylene and ammonia (solvents in general).

All these operations must be done carefully to avoid scratching the surfaces. Avoid all the use of abrasive products or cloths with hard fibers.

Do not keep surfaces remaining in contact with water or other liquids, even for brief periods. Exposure to direct sunlight may alter the color of the lacquer.

12

13

14

15

STUDENTTABLE

16

BANCO TableSINGLE DESK (B25)School desk model B25, detachable, build with tube Ø40mm joint by Ø40mm legs that make it strong on all 4 sides. Wooden laminated top 20mm thick with different sizes edges in solid wood or abs. Anti-slipping plugs, which largely cover the tube, adjustable in case of uneven floor. Storage drawer for educational material, in polypropylene or metal.

Desk top size: 1 600 x 600mm 2 650 x 650mm 3 700 x 700mm

DOUBLE DESK (B25-D)School desk model B25, detachable, build with tube Ø40mm joint by Ø40mm legs that make it strong on all 4 sides. Wooden laminated top 20mm thick with different sizes edges in solid woods or abs. Anti-slipping plugs which largely cover the tube, adjustable in case of uneven floor. Storage drawer for educational material in polypropylene or metal.

Desk top size: 1 1200 x 600mm 2 1300 x 650mm 3 1400 x 700mm

17

Table Height Size 3 : 590mmSize 4 : 640mmSize 5 : 710mmSize 6 : 760mmSize 7 : 810mm

18

PLANOPLANO series cantilever frame with horizontal desk top - fixed table height, the metal skid rack is from powder-coated, hand friendly oval steel tube in fixed soil gliders. The desk top is “HPL Laminate” with a 2mm all-plastic edge provided. The soil gliders are implemented from glass-fiber reinforced Polyamide - which is sliding surface as change employment simply into the soil glider, art sliding surface against felt sliding surface or sliding screw replaceable. Per seat laterally a hook is attached.

Size 2 3 4 5 6 7Chair height 30 cm 34 cm 38 cm 42 cm 46 cm 51 cm

For Table height 52 cm 58 cm 64 cm 70 cm 76 cm 82 cm

Table Top Size Code Available Height750 x 600 mm 4653 Size 2 to 7 available1300 x 600mm 4654 Size 2 to 7 available1500 x 600mm 4656 Size 2 to 7 available1300 x 500mm 4652 Size 2 to 7 available

19

TEACHERTABLE

20

MAESTROFrame with round tubing four-foot rack, the four-foot trim rack is from powder-coated steel tube with foot cross section 38/2mm dia. The table height of 760mm is coordinated with the size class 6 of the Table.

“HPL Laminate”: with 1 mm laminated material plate occupies both sides (strength 25mm).

The teacher table underbodies are from 18 mm strong MDF (medium density fiberboard).The body with drawer and door and/or. 3 drawers is left selectable depending upon model type on the right of order. The model has 3 organization drawers with covers rails and stopping mechanics running in ball bearings, plus above 1 implement drawer.

The soil potting is with felt equipped.

21

With front panel.Frame : 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2573

Size : 1300 x 650 x 760mm

Right: floor unit (450x600x450mm) with drawer, door with lock.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2502

Size : 1300 x 650 x 760mm

With front and side panel.Right: floor unit (450x600x450mm) with drawer, door with lock.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2512

Size : 1300 x 650 x 760mm

22

With front panel.Right: floor unit (450x600x450mm) with 3 drawers, top drawer lockable.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2503

Size : 1300 x 650 x 760mm

With front and side panel.Right: floor unit (450x600x450mm) with 3 drawers, top drawer lockable.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2513

Size : 1300 x 650 x 760mm

Right: floor unit (450x600x450mm) with drawer, door with lock.Left: floor unit (450x600x450mm) with 3 drawers, top drawer lockable.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders

Code : 2532

Size : 1600 x 650 x 760mm

23

Left: floor unit (450x600x450mm) with door.Right: floor unit (450x600x450mm) with 3 drawers and a small drawer for paraphernalia. Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders.

Code : 2540

Size : 1600 x 650 x 760mm

Right: floor unit (450x600x450mm) with 3 drawers, top drawer lockable.Left: floor unit (450x600x450mm) with door.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders.

Code : 2505

Size : 1300 x 650 x 760mm

Right: floor unit (450x600x450mm) with drawer, door with lock.Left: floor unit (450x600x450mm) with door.Frame: 4 feet metal frame made from powder-coated solid steel tubes with felt gliders.

Code : 2506

Size : 1600 x 650 x 760mm

24

TONO Desktops: Desktops made of 25mm thick melamine panels edged by 2mm ABS. Rectangular and L shaped desks.

Metal legs: It consist of metal legs made of Steel consisted of 2 oval blades of 40 x 20, linked together by the 2mm thick metal bottom base and L shaped profile top. The laminated profiles are welded together. Epoxy silver finish RAL 9006. It includes a removable plastic cable management cover. It is made of extruded PVC in RAL 9006 (silver). Legs are fixed to the desktop by bolts.

Modesty Panel: It is manufactured in 19mm thick melamine edged by 0.8mm ABS. Silver finish. It includes cable access. The modesty panel is assembled to the legs by hooks and screws. Cable clips are optional.

ELECTRIFICATION SETRounded gromet: of 60mm diameter in silver finish.

Cable plastic beam: silver finish.

CPU Holder: silver or white finish.

FIXED PEDESTAL• Includes metal support to be linked to the desk. • Sides, top, bottom and back in 19mm thick melamine; edges of 0.8 mm in ABS (except the back panel of 8mm). • Drawer fronts made of 19mm melamine panels, 0.8mm edges in ABS. • Tops of 25mm panels; edges in ABS of 2mm and 0.8mm. • Drawers in melamine, ball bearing slides on all drawers and total extraction slide on filings drawers. Drawer pedestals are provided with a simultaneous locking mechanism for all drawers. • Optional accessories from CD slides or pencil tray, both in black PVC to A4, A5, A6, A7 for metal drawers. Locks are available with normal keys, mastered or same keys.

Desktop: white, grey, beech, maple, pear, wengue.

Structure: Silver

Table Dimension: 1800 x 800/1000 x 730mm

Fix Pedestal: 440 x 800 x 730mm

25

STUDENT’SCOMPUTER TABLE

26

ESPACE Top: produced in melamine of 25 mm. Rounded edges radius 50mm. Edging in 2mm.

Leg frame: consists of steel tube of 50 x 30 x 2mm, columns in round tube of 55 x 55 x 1.5. Joint between the columns and crossbar by welding. Height fixed legs or adjustable (760-680mm) as an option. Both systems with levelers of 20mm.

Reinforcement: beam made of steel tube of 50 x 20 x 1.5 and two plate of steel bent and welded to the tube. Then assembled with the legs by screws (silver finish). Individual frames for each desk.

ELECTRIFICATION SET Rounded gromet: of 60mm diameter. Silver finish.




Structure: Silver, white, graphite or black.

Dimension: 800 x 800 x 730mm

27


Metal legs: It consist of metal legs made of Steel consisted of 2 oval blades of 40 x 20, linked together by the 2mm thick metal bottom base and L shaped profile top. The laminated profiles are welded together. Epoxy silver finish RAL 9006. It includes a removable plastic cable management cover. It is made of extruded PVC in Ral 9006 (silver). Legs are fixed to the desktop by DIN-7985

M16 x 15 bolts.

Modesty Panel: It is manufactured in 19mm thick melamine edged by 0.8mm ABS. Silver finish. It includes cable access. The modety panel is assembled to the legs by hooks and screws. Cable clips are optional.





Structure: Silver

Dimension: 800 x 800 x 730mm

28

K2 CANTILEVER LEGSOur workstation is to ensure an optimal ergonomics for pupils and teachers in computer science instruction. Screen tables can be with skid or four legs implemented and offer an optimal leg liberty. In TOWERKORPUS is the computer protected however to serve nevertheless easily. Current and data lines are in special channels easily accessible accommodated. Material, functional elements and Design are harmonious one on the other coordinated.

29

• equipped with 2 plastic cable connector with cover (Ø 80 mm)

• cable duct made from plywood/MDF

• Double Feet Skid Frame made from powder-coated steel pipes

• Floor Gliders made from glass fiber reinforced polyamide

• Also available in 700mm depth.

3821 : 800 x 800 x 720mm

3822 : 1200 x 800 x 720mm

3823 : 1400 x 800 x 720mm

3824 : 1800 x 800 x 720mm

• equipped with a plastic cable connector with cover (Ø 80 mm)

• cable duct made from plywood/MDF.

• Double Feet Skid Frame made from powder-coated steel pipes

• Floor Gliders made from glass fiber reinforced polyamide

• Also available in 700mm depth.• Rack for tower (for each side or

both as per required)• - Dimensions: 280/580/540 mm

(outside), 240/560/470 mm (inside) PC (800 mm of depth):

• - Dimensions: 280/520/540 mm (outside), 240/500/470 mm (inside) PC (700 mm of depth):

3825 : 1050 x 800 x 720mm

3826 : 1200 x 800 x 720mm

3827 : 1600 x 800 x 720mm

3828 : 1800 x 800 x 720mm


• cable duct made from plywood• Double Feet Skid Frame made

from powder-coated steel pipes• Floor Gliders made from glass

fiber reinforced polyamide

3843 : 600 x 600 x 720mm

3844 : 800 x 600 x 720mm

30

K2 FOUR LEGS

31

• with cable duct K2 and cover• Also available in 700mm depth.

3921: 800 x 800 x 720mm

3922 : 1200 x 800 x 720mm

3923 : 1400 x 800 x 720mm

3924 : 1600 x 800 x 720mm

• with cable duct K2 and cover.• with rack providing space for a

tower PC, mounted on the right (or left) side




• - Dimensions: 280/520/540 mm (outside), 240/500/470 mm (inside) PC (700 cm of depth):

3925: 800 x 800 x 720mm

3926 : 1200 x 800 x 720mm

3927 : 1400 x 800 x 720mm


• cable duct made from plywood 4 feet frame made from powder-coated square tubes with plastic gliders




• - Dimensions: 280/520/540 mm (outside), 240/500/470 mm (inside) PC (700 cm of depth):

3928: 1800 x 800 x 720mm

3929 : 2000 x 800 x 720mm

32

33

TEACHER’SCOMPUTER TABLE

34

ESPACE Top: producedproduced in melamine of 25 mm. Rounded edges radius 50mm. Edging in 2mm.

Leg frame: consists of steel tube of 50 x 30 x 2mm, columns in round tube of 55 x 55 x 1.5. Joint between the column and crossbar by welding. Height fixed legs or adjustable (760-680mm) as an option. Both systems with levellers of 20mm.

Reinforcement: beam made of steel tube of 50 x 20 x 1,5 and two plate of steel bent and welded to the tube. Then assembled with the legs by screws (silver finish). Individual frames for each desk.




FIXED PEDESTAL • Includes metal support to be linked to the desk. • Sides, top, bottom and back in 19mm thick melamine; edges of 0.8 mm in ABS (except the back panel of 8mm). • Drawer fronts made of 19mm melamine panels, 0.8mm edges in ABS. • Tops of 25mm panels; edges in ABS of 2mm and 0.8mm. • Drawers in melamine, ball bearing slides on all drawers and total extraction slide on filings drawers. Drawer pedestals are provided with a simultaneous locking mechanism for all drawers. • Optional accessories from CD slides or pencil tray, both in black PVC to A4, A5, A6, A7 for metal drawers. Locks are available with normal keys, mastered or same keys.


Structure: Silver

Table Dimension: 1600 x 800 x 730mm


35


Metal legs: It consist of metal legs made of Steel consisted of 2 oval blades of 40 x 20, linked together by the 2mm thick metal bottom base and L shaped profile top. The laminated profiles are welded together. Epoxy silver finish RAL 9006. It includes a removable plastic cable management cover. It is made of extruded PVC in RAL 9006 (silver). Legs are fixed to the desktop by bolts.

Modesty Panel: It is manufactured in 19mm thick melamine edged by 0.8mm ABS. Silver finish. It includes cable access. The modesty panel is assembled to the legs by hooks and screws. Cable clips are optional.

ELECTRIFICATION SET Rounded gromet: of 60mm diameter in silver finish.



FIXED PEDESTAL

• Includes metal support to be linked to the desk. • Sides, top, bottom and back in 19mm thick melamine; edges of 0.8 mm in ABS (except the back panel of 8mm). • Drawer fronts made of 19mm melamine panels, 0.8mm edges in ABS. • Tops of 25mm panels; edges in ABS of 2mm and 0.8mm. • Drawers in melamine, ball bearing slides on all drawers and total extraction slide on filings drawers. Drawer pedestals are provided with a simultaneous locking mechanism for all drawers. • Optional accessories from CD slides or pencil tray, both in black PVC to A4, A5, A6, A7 for metal drawers. Locks are available with normal keys, mastered or same keys.


Structure: Silver

Table Dimension: 1600 x 800 x 730mm


36

K2 CANTILEVER LEGS

- with cable duct K2- with two plastic cable connectors with cover

• equipped with two plastic cable connectors with cover (Ø 80 mm)• cable duct made from plywood/MDF• Double Feet Skid Frame made from powder- coated steel pipes• Floor Gliders made from glass fiber reinforced • polyamide rack (made from 19mm of MDF) with three drawers mounted beneath the desktop (left):• 450/600/540 mm (800mm of depth)• 450/540/540 mm (700mm of depth)• Also available in 700mm depth

Rack for tower (for one side as per required)• Dimensions: 280/580/540 mm (outside), 240/560/470 mm (inside) PC (800 mm of depth):

• Dimensions: 280/520/540 mm (outside), 240/500/470 mm (inside) PC (700 cm of depth):

3876 : 1400 x 800 x 720mm

3877 : 1600 x 800 x 720mm

3878 : 1800 x 800 x 720mm

37

K2 FOUR LEGS• with cable duct K2 and cover• Cable Duct , made from 19 mm of MDF laminated positioned beneath the table, cable duct accessible by means of moving the desktop• four feet frame made from powder-coated square tubes• Floor Gliders made from plastic• Rack (made from 19mm of MDF laminated) with three drawers mounted beneath the desktop (left):• 450/600/540 mm (800 mm of depth)• 450/520/570 mm (700 mm of depth)• Also available in 700mm depth

Rack for tower (for one side as per required)• Dimensions: 280/580/540 mm (outside), 240/560/470 mm (inside) PC (800 mm of depth):

• Dimensions: 280/520/540 mm (outside), 240/500/470 mm (inside) PC (700 cm of depth):

3976 : 1400 x 800 x 720mm

3977 : 1600 x 800 x 720mm

3978 : 1800 x 800 x 720mm

38

39

MOVE TABLE

40

FLEXI Rack: 4-Metal legs from powder-coated steel tube, foot cross section 38/2mm, with pile buffer at the trim lower surface. The upper accessible tube end is welded with a steel plug.

Soil glider: The soil sliding surface is according to standard felt. Felt is welded with the plastic housing of the glider

Desk top: 20 mm, fine MDF board with 1 mm each laminated material lining. The edges are rounded from 2 mm PVC edging and. Execution of the tables without or with roles (2 rollers Ø 50 mm at the external table feet, with soft bearing surface).

Up to 7 tables are stackable.

Link: Swing-out one Plastic table link to the coupling of the tables.

Four-foot frame

1800 -750x600mm (WxD) (Size 3 – 6 )

Four-foot frame, with two rollers

1810 -750x600mm (WxD) (Size 3 – 6)

Four-foot frame

1801 -700x700mm (WxD) (Size 3 – 6)

1803 -800x800mm (WxD) (Size 3 – 6)


1811 -700x700mm (WxD) (Size 3 – 6)

1813 -800x800mm (WxD) (Size 3 – 6)

41

Four-foot frame

1802 -1400x700mm (WxD) (Size 3 – 6)

1804 -1600x800mm (WxD) (Size 3 – 6)


1812 -1400x700mm (WxD) (Size 3 – 6)

1814 -1600x800mm (WxD) (Size 3 – 6)

Four-foot frame

1807 -1400x700x700mm (WxD) (Size 3 – 6)

1808 -1600 x 800x800mm (WxD) (Size 3 – 6)


1817 -14000x700x700mm (WxD) (Size 3 – 6)

1818 -1600x800x800mm (WxD) (Size 3 – 6)

1899

Table Connectors (per table), for stackable tables, consisting of:4 table connectors, mounted on the underside of the table plate

42

PILERThe Move-Table is easily, space-saving and thereby expressed stable.By the arrangement of the table feet the table is stackable and can be link without gaps together.The move Table makes rapid regroupings possible and creates fast much free space.

• Table sizes: 750/600, 700/700, 800/800, 1400/700, 1600/800, trapezoid tables: 1400/700/700, 1600/800/800 heights: 580mm/640mm/700mm/760mm• Lining up of the tables without gap • up to 7 tables stackable • Execution without and with roles (soft bearing surface) - easy handling • High stability - by welded steel tube rack • Pile protection at the trim lower surface • The tables can be stacked by a person• Make possible a fast transformation • Upper accessible tube end with a steel plug welded shut

43

44

The Move - Table - is equipped with shop guidance for plastic storage boxes.The plastic boxes are usable by the front and back of the table insertable (also with the models 700/700 mm and 750/600 mm) and during a row list reciprocally.All MoveTable basic functions remain: Easily, space-saving, stably, lining up without gaps and above all stackable. (Stacking without drawer)

• Table sizes: 750/600, 700/700, 800/800 heights: 580mm/640mm/700mm/760mm • Equipment with shop guidance for plastic boxes• During row list the drawer can be used by both table sides.• Lining up of the tables without gap• up to 7 tables stackable • Execution without and with roles (soft bearing surface) - easy handling• High stability - by welded steel tube rack• Pile protection at the trim lower surface• The tables can be stacked by a person• Makes possible a fast transformation

45

Four-foot frame

1800L -750x600mm (WxD) (Size 3 – 6)


1810L -750x600mm (WxD) (Size 3 – 6)

Four-foot frame

1802 -1400x700mm (WxD) (Size 3 – 6)

1804 -1600x800mm (WxD) (Size 3 – 6)


1812 -1400x700mm (WxD) (Size 3 – 6)

1814 -1600x800mm (WxD) (Size 3 – 6)

Storage boxes – plastic BOX1 31/38/7.5 cm(width/depth/height)

46

1899

Table Connectors (per table), for stackable tables, consisting of:4 table connectors, mounted on the underside of the table plate

47

SEGMENT 60° - 90° Move Table segment 60° & 90° for a fast and simple configuration of group works.A list change takes place within fewer seconds!The light, mobile and stackable segment tables are coupled at the table side also out-hinged table links toolless and form a compact disk unit so in each case!

48

• Table sizes: for leg lengths 700 and. 800 mm; Heights: 580mm/640mm/700mm/760mm• Lining up of the tables without gap• 6 (with 60°) and/or. 4 (with 90°) segment tables stackable• Execution without and with roles (yield bearing surface)• Rack from welded steel tubes - high stability• Pile and sliding protection at the trim lower surface• the tables can be stacked by a person• Make possible a fast transformation of areas• Four swinging out plastic table links at the disk lower surface for toolless coupling• Optionally with integrated guide rails for plastic shop

Rack: 3-Fuss-Metal legs powder-coated Steel tube, Foot cross section Ø 38/2 mm, with pile buffer at the trim lower surface.

Soil glider: The soil sliding surface is according to standard felt and welded with the plastic housing of the glider.

Desk top: 20 mm, fine MDF board with 1 mm each laminated material lining. The edges are rounded from 2 mm PVC edging and. Execution of the tables without or with roles (2 rollers Ø 50 mm at the external table feet, with soft bearing surface).

Link: Swing-out one Plastic table link to the plastic coupling of the tables. 6 (60°) and/or. 4 (90°) tables are stackable.

Tray: Storage box from plastic with grip recess in the colors: red, yellow, blue or transparency.

Move Table Segment 60°

Three-foot frame

1820 -leg length 700mm (Size 3 – 6)


Three-foot frame, with two rollers



49


Three-foot frame







Three-foot frame

1820L -leg length 700mm (Size 3 – 6)





50


Three-foot frame






Storage boxes – plastic

BOX1 31/38/7.5 cm (width/depth/height)

1899

Table Connectors (per table), for stackable tables, consisting of:4 table connectors, mounted on the underside of the table plate.

51

Three-foot frame

1800AL -750 x 600mm (12mm top) (Size 3 – 6)

1801AL -700 x 700mm (12mm top) (Size 3 – 6)

1803AL -800 x 800mm (12mm top) (Size 3 – 6)


1810AL -750 x 600mm (12mm top) (Size 3 – 6)

1811AL -700 x 700mm (12mm top) (Size 3 – 6)

1813AL -800 x 800mm (12mm top) (Size 3 – 6)

LITE The move - Table LITE is particularly easily, space-saving and thereby expressed stable.By the arrangement of the table feet it is stackable and can be joined without gaps together.The move Table LITE makes possible very easy regrouping and creates fast much free space.

Four-foot rack from powder-coated Aluminum pipe, Foot cross sectionØ 38/2 mm, table heights: 580mm/640mm/700mm/760mm. Pilebuffer at the trim lower surface. The upper accessible tube end iswelded shut with an aluminum plug. The soil sliding surface isfelt very much according to standard durable Light-weight precastplate with 12 mm of strength. The edges are rounded from2 mm all-plastic and. Execution of the tables without or withroles (2 rollers Ø 50 mm at the externaltable feet, with soft bearing surface).There is stackable up to 7 tables.

52

WAVE Flexibly combine with the wave shape. The wavy disk outline makes possible any dressing of the table form. Those

homogeneous connect optimally together. The move Table - wave tables can in all Variations combines and arranged become.For team work is immediately the appropriate Slab mould and - size prepares. Optionally the wave tables can also swing-out table links, for slip-safe arranging of the tables, are equipped.

• Table height: 760 mm• High stability - rack from welded Steel tubes• Space requirement during circle list: Ø 1500 mm• both wave table models by homogeneous Radius shaping of the desk tops arbitrary arranging and expandable• Table foot arrangement for optimal leg and Freedom of movement • optimal disk support by circulating Trim rack • with swing-out table links for slip-safe arranging the tables• with circular list for up to 6 pupils Been suitable

53

Rack: Four-foot metal trim rack from powder-coated Steel tube, Foot cross section Ø 38/2 mm, circulating.Metal trim (FR 30/20/2 mm) for disk support

Soil glider: The soil sliding surface is according to standard felt. Felt is welded with the plastic housing of the glider

Edges: from 2 mm all-PVC Edging and rounded

Desk top remarks: 20 mm HPL laminate, MDF board with 1 mm each laminated material lining laminate.

Move Table - Wave semi-circle

Four-foot rack, Height of 760 mm1850 1140/645 mm, table top 20 mm HPL Laminate, with 2 table links

Move Table - Wave rectangle

Four-foot rack, Height of 760 mm1851 1200/720 mm, table top 20 mm HPL Laminate, with 6 table links

54

55

56

PENTA Flexible school furniture for modern learning environmentsMove Table penta - variable, easily and individually combinable. Instruction in 21st Century requires a multi-functional spatial arrangement, those are at short notice changeable and various learning situations supported. Rigid one seat orders belong to the past. A learning area up-to-date should invite one to learning and Atmosphere creates in the pupils and teachers probably-feel.

That Move Table penta can be changed over fast and simply, around the changing basic conditions for group works, to create individual learning or working in the class federation. For each learning situation are an individual and a meeting demand Transformation possible. Is by the particularly developed table form a multiplicity at groupings possible. The arrangement of the table feet makes one possible

Rack: Four-foot metal trim rack from powder-coated steel tube with felt soil sliding surface, table height 760 mm, optionally with a swivel roller with soft bearing surface. Desk top remarks:

• 21 mm HPL, fine MDF/chipboard with 1 mm each laminated material lining • MDF/chipboard melamine resin-coated in 19 mm.

Move Table - Penta

Four-foot rack, Height of 760 mm1860 880/606 mm, table top 20 mm HPL Laminate

57

58

59

60

61

PUZZLE FREE FORMING TABLE FOR SINGLE AND GROUP WORKS. The puzzle form table with circulating knows in all directions arranged and at will to be extended. In the hand turning it is possible for team work to prepare the suitable table grouping. At the single table pupils can/inside up to 7 at the same time work - the appropriate arrangement the table feet offers optimal flexibility and liberty.

The table is also as standing table variant with additional Shelf under the desk top available!

Move Table - Puzzles

Four-foot rack, table height 760 mm,1855 1780/1150 mm, plate 20 mm HPL Laminates

Move Table - Puzzle standing table

Four-foot rack, table height 1010 mm, specialized height 720 mm1856 1780/1150 mm, plate 20 mm HPL Laminate

62

• Space requirement per table: 178 x 115 cm • Table heights 76 cm, 101 cm (standing table) • High stability - rack from welded steel tubes • Table form with same in each case radii, therefore arbitrarily arrangable and expandable • Table foot arrangement for optimal leg and freedom of movement • optimal disk support by circulating trim rack • Standing table variant with additional shelf • as single table for group works for up to 7 pupils

63

64

ACTIVITY CHAIROur range of Chairs available in different materials, models, shapes and colors. Every chair has passed rigorous quality tests, in compliance safety standards and product warranty, obtaining the maximum aesthetical and functional performance, with the sole purpose of adding functionality and style.

D21 – Activity Chair

• Polypropylene seat shell.• Metallic 4-legs structure chromed finish.

D18 – Activity Chair

• Polypropylene seat shell.• Metallic 4-legs structure powder coating finish.

SG Work Stoll

• 5 Star nylon Base• Dual Castor at the base, as lift• Oval Tube in between seat and backrest• Seat and back in plywood painted in natural color

65

MOVE BOX

66

MOVE BOX is a mobile cabinet, which permits a modern and flexible instruction.

Korpus on steel section frameworks, at the corners with steel tube over entire height, powder-coats 9006

Strong double swivel rollers Ø 75 mm, two double swivel rollers (in front) ascertainable; specialized floor supports with fixing taps.

• 9355 870/1450 mm (to cabinet width 970 mm)• 9357 1170/1450 mm (to cabinet width 1270 m)• 9365 870/1450 mm (to cabinet width 970 mm)• 9367 1170/1450 mm (to cabinet width 1270 mm)

67

69110 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: two fixed shelves Size: 1270 x 520 x 905mm

69115 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: one adjustable shelf Size: 970 x 520 x 905mm

69105 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: one fixed shelf Size : 970 x 520 x 905mm

69120 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.,two doorsInterior: one adjustable shelfSize : 1270 x 520 x 905mm

68

69180

for TraysFrame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Size: 1120 x 520 x 1105mm

69175 for TraysFrame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Size: 775 x 520 x 1105mm

69185 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: one fixed shelf and one mid bay Size: 775 x 520 x 1105mm

69190 for TraysFrame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: one fixed shelf and two mid bay Size: 1120 x 520 x 1105mm

69

69235

- for Trays and file boxFrame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Size: 775 x 520 x 1630mm

69240 for Trays and file boxFrame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Size: 1120 x 520 x 1630mm



70

69195

Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: three fixed shelves and two mid baySize : 970 x 520 x 1630mm

69200 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: three fixed shelves and three mid baySize : 1270 x 520 x 1630mm

69210 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: three fixed shelves and one mid baySize: 1270 x 520 x 1630mm

69205 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: three fixed shelves Size : 970 x 520 x 1630mm

71

69215

Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: two fixed shelf above, below two doors and one adjustable shelf.Size : 970 x 520 x 1630mm

69230 Frame: made from powder-coated steel tubesequipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: one fixed & three adjustable shelvesSize : 1270 x 520 x 1630mm

69225 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF., two doorsInterior: one fixed & three adjustable shelvesSize : 970 x 520 x 1630mm

69220 Frame: made from powder-coated steel tubes equipped with plastic roller gliders (guidable)Cupboard: can be made of 20mm HPL laminate MDF or 19mm Melamine MDF.Interior: two fix shelf above, below two doors and two adjustable shelvesSize : 1270 x 520 x 1630mm

72

Storage boxes – plasticBOX1 31/38/7.5 cm (width/depth/height)

Storage boxes – plasticBOX1 31/38/15 cm (width/depth/height)

73

TRAY STORAGE

74

Our standard tray range comes in four heights and over 30 colors. It’s designed to be interchangeable between wooden furniture, metal trolleys and frames, whilst our range of complementary trays (Art and A3) add even more flexibility to storage needs.

75

76

77

METAL TROLLEY As part of our storage system, we make custom foam inserts that ensure anything from test tubes to microscopes fits perfectly in our storage trays. And we haven’t forgotten about the need to transport all this science equipment from Prep Room to classroom, either. Our range of trolleys (available in single, double or treble columns) is designed to shift all kinds of science apparatus with ease. And because they’re fitted with the same tray system as our frames, everything is interchangeable.

Now you can transport all your equipment from the store to the classroom and back again with ease. Our metal trolleys will hold any of our four tray sizes in any combination you need. Simply slide the trays into the trolleys.

78

79

80

Metal Frame The importance of storage of science and other equipment, that’s why we can offer a range of metal furniture which makes up a complete storage system.

Our storage units can hold any of our four depths of tray in any combination that suits your school. And all of our tray sizes are interchangeable between the frames and trolleys so you can easily move equipment around the school as needed.

81

82

83

84

85

86

WOODEN TRAY FURNITUREThe tray itself has been designed to exceed all educational standards, and we are proud of its excellence of the design. Our tray has become the standard school tray for furniture all over the world.

Our furniture incorporated our tray with standard runner and fitting. If you’re looking for a new design fitting your requirement, try to check our sample or we can provide you of a helping hand to make it happened.

87

Tray Color

88

Inset

89

P wer TrayCost effective, intelligent charging from the experts in storage solutions! The PowerTray is the latest addition to growing product portfolio and is the ultimate solution in mobile device storage.

The PowerTray has been ergonomically designed and based on the iconic shape, provides full mobility and ease of use. The PowerTray can charge and sync up to 10 USB devices at optimum speed, thanks to its built-in digital device recognition technology.

Fully compatible with a variety of worldwide classroom and office furniture, the PowerTray can integrate with existing storage, and is available in two size variations, offering a perfect, cost effective solution to many schools and businesses.

• Charge and sync up to 10 USB devices • Two tray depths available, to optimise space utilisation • Cost effective, intelligent charging • Compatible with hundreds of USB devices, including; Apple, Android, Windows and many more • Fully portable

90

P wer Trolley

The PowerTrolley has been specifically designed to accommodate the PowerTray and can store up to 30 USB devices. With one of the smallest footprints on the market, the PowerTrolley is perfect for any school or officeenvironment, combining portability, security and functionality.

The PowerTrolley features include; bespoke door hinges for a convenient 270 degreeopening angle, a robust locking system for ultimate security, and lockable castors foradded stability.

The PowerTrolley is compatible with both the F2 and F25 Gratnells PowerTrays andis available in 5 modern colours. Thanks to its unique design, the PowerTrolley fitsdiscreetly in to any school and office environment, creating an unobtrusive solutionfor storing your valuable devices.

91

TRAY STORAGE UNITModular cabinet, chipboard structure. Movable shelves, swinging doors. Possibility of application of closing doors, in different shapes and configurations depending on needs.

92

93

94

95

LIBRARYSHELVING

96

The combination of melamine and metal provide our product with a warm aesthetic appeal and the perfect solution for different kinds of library use. Its design and wide choice of finishes provide a welcoming setting for reading areas and libraries in general. Its offers a wide selection of different types of modules and accessories that combined with the quality of its finishes makes this bookcase as the ideal solution for also offices and books etc…

Metal shelves have been designed to offer not only strength but also aesthetic appeal. The metal frame concealed below the canopy guarantees the stability of the bookcase. The asymmetric design of the book supports readily adapts to any book size as well as making them very easy to move and secure in position. Sloping hinge door shelves slide upwards and into the unit to allow access to rear storage compartment for the stock of back issues of the new item displayed on the shelf.

97

ComponentsSide Panel: Furniture grade Medium Density Fiberboard (MDF) is a reconstituted wood panel product. It is dry-processed fiberboard manufactured from wood fibers and it has an even density throughout and is smooth on both sides. Can be HPL laminated, veneered or melamine on both side uprights, side ends and centre gables, are zipped at 32mm increments for shelf height adjustment. The uprights include 30mm thick nylon foot levelers. Embedded thumbscrews are included in the uprights to secure with open metal back frame or back panel.

Shelves: 1mm full sheet metal with longitudinal folds and folded backstop. Welded label holder.

Payload: 80 KG uniformly distributed.

Canopies: 1mm full sheet metal with longitudinal folds.

Metal Back panels: Open metal back frame made from 30x20x1.5mm metal tube secured with special supplied fittings to the side ends and centre gables.

Wood Back panels: Close wooden back frame made from laminated MDF same finish with side panel supplied fittings to the side ends.

Plinth: 1mm full sheet metal.

Options:

Book supports: end to attach to shelf backstop.

98

Library Shelves (Single with normal shelves)

Module with Metal or Wooden back panel. Shelves with label

holder and backstop.Height Width Depth Reference

99

Note : • All Reference with * corresponds to the same module with wooden back panel.

100

Library Shelves (Double with normal shelves)



101


102

Library Display Shelves (Single with display & normal shelves)



103


104

Library Shelves (Double with display and normal shelves)



105

Note : • All Reference with T* corresponds to the same module with wooden back panel.• Metal Plinth will be optional as per required.

106

107

BOOKTROLLEY

108

Legs / Frame: 25x25mm epoxy powder coated mild

steel square tube with PVC end cap.

Shelves/side covering panel: 1.2/0.8mm thick epoxy powder coated mild steel sheet.

Castor: 110mm dia swivel castors.

109

110

111

112

113

Mobile Cabinet & Soft Seating Elements

114

Structure of glued linear and curved (60°) carcasses on a steel cross-member with 4 or 5 (60°) technical castors, 2 of which are lockable. Optional with 5 adjustable feets. Carcass made of melamine-resin-coated MDF with glued-on plastic edge. With glued centre walls for partitioning the carcasses. With rows of holes (25 mm) for adjustable shelf inserts and a perforated-plate or back panel.

Depending on the model with plastic boxes on guide rails. Function: With magnets (optional) on the outer sides for docking further cabinet elements. Curved Landscape seating and cabinet elements can be combined linearly and, thanks to the matched inner and outer radius, back to back to create circular and serpentine seating/cabinet landscapes. Push-handles (optional) made of steel on the top of the carcass. The following material groups are available to choose from body.

115

116

Upholstered-element system consisting of carcass and seating elements.Seating elements are linear or curved stools. Individual elements can be combined to form complete landscapes. Elements consisting of a floor plate with plastic or felt glide elements and a cushion of flame-retardant MVSS-302 foam with leatherette cover.

Seating sizes in 3 fixed heights.

Carcass of melamine-resin-coated chipboards with glued-on plastic edge. With glued centre wall for partitioning the carcass. With rows of holes (25 mm) for adjustable shelf inserts and a perforated-plate back panel.

Function: Curved Landscape seating and cabinet elements can be combined linearly and, thanks to the matched inner and outer radius, back to back to create circular and serpentine seating/cabinet landscapes.

117

118

119

LIBRARYCOUNTER

120

DARROOutstanding materials, suitability and versatility make of the

DARRO counter a comfortable workplace as well as an excellent presentation card for visitors. Softly

and warmly shaped, the modules offer one or two heights, which let the visitor rest as he or she leans on the counter while the assistant is comfortable enough to work due to the special arrangement of spaces in the inner side of the counter.

The bottom of the inner space may be arranged in different ways: doors, shelves or drawers, all of which improve the area.

In the upper part, the organizer components guarantee the best use of space.

121

DARRO Module

Complement

122

123

DEVAThe wide range of DEVA modules available (basic rectangular or rectangular units with transaction counters; interior or exterior corner units either open or closed) allow multiple configurations formed by different modules.

These can also be at multiple heights and the design allows for the use of internal modules to customize the desk according to desired function and use. A sampling of the internal modules and accessories would be pull-out keyboard trays, storage organizers, modules with doors, modules with drawers, modules with shelves or a combination of these modules to any array of possible solutions.

124

DEVA is the simplest and most functional option for workplaces involving reception or personal assistance. Its simple, elegant design provides specific solutions to requests, conveniently adaptable to diverse spaces and architectural styles. Starting from two basic modules: straight and 90° curved, a wide range of combinations is available, as well as the counters are suitable for each of the spaces.

125

126

127

MODULAR SOFA SEATING

128

MODULAR SOFA SEATINGTM Furniture Soft Seating is a modular sofa allows you to jazz up your classroom or activity area with refined taste.

The fan-shaped individuals can be used as stand-alone piece of furniture, or together to form a landscape of liveliness.

Student can play around with the curves and create endless possibilities of your own. This will help to unleash the student creativity and imagination.

The Snake

Round Curvy

Donut

129

Question Oval

Round Seating

Square Seating

Square Seating

130

Modular Seating 2Whether space-saving at the wall and/or. in a corner, or as seat landscape in the middle in the area.

All elements are combinable with one another. Material: durable foam material core, purchase alternatively in-colored (PG3) or examined (PG4).

Both groups of materials are durably, pollutant-examined and with difficulty inflammable.

Seat level: 42 cm Overall height with seat-back: 80 cm

131

132

133

MAGNETICMARKERBOARDS

134

MAGNETIC MARKERBOARDSadd versatility to any classroom or office as a high-quality writing surface and magnetic tackboard. A dry erase marker board can be used as a presentation white board, a notice board, or in some cases a projection surface.

MARKERBOARD WRITING SURFACE:PolyVision’s e3 environmental ceramicsteel™ surface offers the smoothest writing, easiest erasing and best visibility (not to mention longest durability) you’ll find anywhere. Plus, we made it with environmental responsibility in mind: safe, clean, and 99.9 percent recyclable. With more than fifty years of excellence in creating learning tools and surfaces, we pioneered the ceramic-on-steel method—now the industry standard— and we still lead the market in quality and sustainability.

Environmental Features• e3 environmental ceramicsteel surface is 99% recyclable• Cradle-to-Cradle™ Silver Certification• Its non-flammable & non-combustible• In all coatings, the total amount of heavy metals cadmium, • mercury, hexavalent chromium, and lead is less than 0.1%• No Volatile Organic Compounds (VOCs)

PolyVision Ceramicsteel Advange• Ultra-smooth writing and erasing• Magnetic surface• Ultra-clean erasing/ultimate dry-erasability and half the

dust of most chalkboards• Significantly less surface/light distortion• Superior visibility• Hard surface is virtually indestructible• Forever warranty

135

136

MAGNETIC WHITE DRYMARKER BOARD

137

138

139

LAMINATE SELECTIONHIGH PRESURE LAMINATE (HPL)

PLAIN COLORS

PRE-LAMINATED MELAMINE MDFPLAIN COLORS

WOODGRAIN COLORS

856 XL - FROSTY WHITE 857 XL - ORANGE



140

WOODGRAIN COLORS

POWDER COATING COLOR SELECTION


SCHOOL Furniture

Documents