Schedule of Accreditation United Kingdom Accreditation Service … · 2710 Accredited to ISO/IEC 17025:2005 Schedule of Accreditation issued by United Kingdom Accreditation Service

Assessment Manager: PL Page 1 of 12

Schedule of Accreditation issued by

United Kingdom Accreditation Service

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2710

Accredited to

ISO/IEC 17025:2005

Intertek Testing Services Ltd, Shanghai

Issue No: 026 Issue date: 02 February 2018

2nd Floor

Building No 4

Shanghai Comalong Industrial Park

889 Yi Shan Road

Shanghai 200233

China

Contact: Ms Cynthia Liu

Tel: +86 21 6091 7064

Fax: +8621 6119 5015

E-Mail: [email protected]

Website: www.intertek.com/www.intertek..com.cn

Testing performed by the Organisation at the locations specified below

Locations covered by the organisation and their relevant activities

Laboratory locations:

Location details Activity Location code

Address 4th, 5th & 9th Floors Building No 2 Shanghai Comalong Industrial Park 889 Yi Shan Road Shanghai 200233 China

Local contact Ms C Liu Tel: +8621 60917064 Fax: +8621 6119 5015

Testing: Furniture - Furnishing - Flammability

A

Address Block B Jinling Business Square No 801 Yi Shan Road Shanghai 200233 China

Local contact Ms C Liu Tel: +8621 6120 6565 Fax: +8621 6119 5015

Testing: Toys - Physical/Mechanical Toys - Flammability Toys - Chemical Toys - Electrical Safety Writing & Marking Instruments Leather - Chemical Textiles - Chemical Plastics - Chemical Wood-based Panels - Chemical Ceramics/Glass/Enamel - Chemical Furniture - Strength & Stability

B

Address Building 86, No.1198,

Qinzhou North Road,

Shanghai 200233

China

Local contact Ms C Liu Tel: +8621 60917064 Fax: +8621 6119 5015

Testing: Toys- Electrical Safety

C

2710

Accredited to

ISO/IEC 17025:2005


United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK



Testing performed by the Organisation at the locations specified


DETAIL OF ACCREDITATION

Materials/Products tested

Type of test/Properties

measured/Range of measurement

Standard specifications/

Equipment/Techniques used

Location

Code

TOYS AND TOY PACKAGING

Physical and Mechanical BS EN 71-1: 2014 Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys

B

EN 71-1:2014

Excluding; 4.20.2.5 Toys using headphones or earphones 4.20.2.12 Voice Toys 8.28.2.4 Toys with earphones and headphones 8.28.2.11 Voice toys

NF EN 71-1: 2014


DIN EN 71-1:2014


2710

Accredited to

ISO/IEC 17025:2005












Location

Code

TOYS AND TOY PACKAGING (cont’d)

Physical and Mechanical

Flammability BS EN 71-2:2011 +A1:2014

EN 71-2:2011+A1:2014 DIN EN 71-2:2011+A1:2014 NF EN 71-2:2011+A1:2014

B

Migration of ceratin elements Category I, Category II, & Category III

SOP SHC-TP226 To implement, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 table 2, Using acid extraction, and ICP(OES) and ICP (MS) To implement EU Directive 2009/48/EC (and Amd 2012/7EU)

B

2710

Accredited to

ISO/IEC 17025:2005












Location

Code


Category III Extractable Chromium (CrIII, CrVI) B

SOP SHC-TP226 To implement, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:201 table 2, Using acid extraction, and ICP (MS) By Subtraction: Cr III = Total Cr – Cr VI To implement EU Directive 2009/48/EC (and Amd 2012/7EU)

First action screening test For Cat I,Cat II & Cat III materials

If total extractable Cr, when Uexp is taken into account; is < 0.02mg/Kg for Cat I; is < 0.005mg/Kg for Cat II is < 0.2mg/Kg for Cat III; then it may be inferred that the sample meets the requirements of, BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 table 2 for The appropriate Category for both Cr III & Cr VI

2710

Accredited to

ISO/IEC 17025:2005












Location

Code


Category III

Extractable Organic Tin

SOP SHC-TP043 To meet limits of table 2 of BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 Total, or presence of other Organic Tin compounds may mean limits of table 2 are exceeded If Organo Tin (expressed as TributylTIn, calculated from total extractable Sn, when Uexp is taken into account; Is < 0.9mg/Kg for Cat I; Is < 0.2mg/Kg for Cat II; Is < 12mg/Kg for Cat III; then it may be inferred that the sample meets the migration limits of BS EN 71-3:2013+A1:2014; EN 71-3:2013+A1:2014 for the appropriate Category for both

Inorganic and Organic Tin

Graphical symbol for age warning labelling

BS EN 71-6:1995 EN 71-6:1994 DIN EN 71-6:1994

B

Swings, Slides and similar activity

toys for indoor and outdoor family domestic use

EN 71-8:2011 BS EN 71-8:2011

B

Toys Labelling Mexican Official Standard NOM-

015-SCFI-2007 B

2710

Accredited to

ISO/IEC 17025:2005












Location

Code


PVC & PVC from TOYS (cont’d)

Children’s Products & Toys Total lead in surface coatings

SHC-TP228 & ASTM F2923-14, to implement CPSC-CH-E1003-09.1:2011, and meet the requirements of 16CFR1303, and CPSIA:2008 section 101, using microwave digestion and ICP(OES)

Total Lead in Plastic materials

ASTM F2617-2015 to meet requirements of CPSIA:2008 using XRF SHC-TP209 to meet requirements of CPSIA 2008 via CPSC-CH-E1002-08.3:2012 uisng hot block or microwave digestion and ICP(OES)

B

Total lead in metal items including

children’s jewellery SHC-TP220 to meet requirements of CPSIA2008 via CPSC-CH-E1001-08.3:2012, using hot black, or microwave digestion and ICP(OES)

2710

Accredited to

ISO/IEC 17025:2005












Location

Code


ELECTRIC TOYS Safety EN 62115:2005 +A12:2015

excluding Clause 16.1 &Annex’s C and E

B & C

WRITING & MARKING INSTRUMENTS

Safety BS 7272-1:2008 BS 7272-2:2008 +A1:2014

B

2710

Accredited to

ISO/IEC 17025:2005












Location

Code

LEATHER Forbidden amine (Azodye) ISO 17234-1:2015 on unmiled

samples using HPLC(DAD) and GC(MS)

B

4-Aminoazobenzene 64 LFGB BVL B 82.02-9 &

§64 LFGB BVL B 82.02-15

ISO 17234-2:2011 on unmilled samples using HPLC(DAD) and GC(MS)

B

Chromium (VI) – Colorimetric

method BS EN ISO 17075-1:2017 IULTCS/IUC 18-1 2017- DIN EN ISO 17075-1:2017-05 onunmilled samplesBy UV-VIS spectrophotometry

B

TEXTILES & GARMENTS Forbidden amine (Azodye) in textile

products with and without extracting the fibres

BS EN 14362-1:2012 (withdrawn) EN 14632-1:2012 (withdrawn) DIN EN 14632-1: 2012 (withdrawn)using HPLC(DAD) and GC(MS) BS EN ISO 14362-1:2017 EN ISO 14632-1: 2017 DIN EN ISO14632-1: 2017-05 using HPLC(DAD) and GC(MS)

B

Mono, di & tri substituted organo tin

compounds SHC-TP044 by extraction and GC(MS)

B

Formaldehyde - free and hydrolized BS EN ISO 14184-1:2011

EN ISO 14184-1:2011 DIN EN ISO 14184-1:2011

A, B

Formaldehyde - released BS EN ISO 14184-2: 2011

EN ISO 14184-2:2011 DIN EN ISO 14184-2:2011

A, B

2710

Accredited to

ISO/IEC 17025:2005












Location

Code

TEXTILES & GARMENTS Quantitative fibre analysis BS 4407:1988, (withdrawn)

except parts 25, 26, 29, 32, 33, 34 EU Directives 73/44/EEC (Annexes I, II & III and 96/73/EC (Annexes I and II) as amended by 2006/2/EC (Annex) (withdrawn)

A

To meet requirements of EU

Directive 1007/2011EU, except Method 16

Determination of metals in textiles SHC-TP462 to implement BS

6810-1:1987, clauses 4.4.3 & 8.5 (Excluding Clause 8.5.4.3) Using UV-VIS Spectrophotometry

B

Determination of Arsenic,

Antimony, Cadmium, Cobalt, Chromium, Copper, Lead, Mercury, & Nickel

IHM SHC-TP230 (Sweat & Saliva Extraction) using ICP-MS

B

- Vertically oriented Textile Fabrics and Fabric Assemblies

Flammability BS 5438:1976(2008) A

- Fabrics and Fabric Assemblies used in Sleepwear and Dressing Gowns

Flammability BS 5722:1984 A

- Pile Fabrics and fabrics having pile on the surface

Ignitability (surface flash) BS 4569:1983(2002) A

- Burning Behaviour of Children’s Nightwear

Flammability BS EN 14878:2007 A

- Burning behaviour of fabrics for apparel

Flammability BS EN 1103:2005 A

2710

Accredited to

ISO/IEC 17025:2005












Location

Code

FURNITURE & FURNISHINGS

Flammability BS 5852:Part 1:1979 * BS 5852:Part 2:1982 *

A

* for the purposes of the

Furniture and Furnishings (Fire)(Safety) Regulations 1988

A

LEATHER and TEXTILES Octylphenol ethoxylates and

Nonylphenol ethoxylates IHM SHC-TP007 Using HPLC-MS

B

pH ISO 4045:2008 on unmilled

samples BS EN ISO 3071-2006

B

LEATHER, TEXTILES & SILICA GEL

Dimethylfumarate IHM SHC-TP014 using GC-MS B

PLASTICS N, N-Dimethylformamide

IHM SHC-TP401 using Headspace GC(MS)

B

Cadmium content BS EN 1122:2001 (Method B)

EN 1122:2001(Method B) DIN EN 1122:2002 (Method B)

B

Swiss Materials Regulations

(STOV) 22:1991

German Chemicals Prohibition

Ordanance Paragraph 18

EU Directive 494/2011 to

amend REACH Regulations (EC) No 1907:2006 - ANNEX XV Using ICP-OES

Phthalate content EN 14372:2004 (Cl 6.3.2) by GC-MS

B

Bisphenol A

EN 14372:2004 Cl. 6.3.6 using HPLC (FLD)

B

IHM SHC-TP050 using HPLC-DAD/FLD or HPLC-MS

B

2710

Accredited to

ISO/IEC 17025:2005












Location

Code

WOOD-BASED PANELS Formaldehyde EN ISO 12460-5:2015

DIN EN ISO 12460-5:2016 EN 717-3:1996 in support of EN 71-9, para 4.3.3 Using UV/VIS Spectrophotometry

B

TOYS & TOYS PACKAGING PAPER & BOARD

Formaldehyde EN 1541:2001 Using UV/VIS Spectrophotometry following EN 645 extraction (excluding para 7) to support EN 71-9 para 4.3

B

CERAMIC, GLASS, GLASS CERAMIC AND VITREOUS ENAMEL ARTICLES

Released Lead and Cadmium BS 6748:1986 +AMD1:2011 using AAS

B

CHROMATE CONVERSION COATINGS

Chromate conversion coatings on Zinc, Cadmium, Aluminium-Zinc alloys, and Zinc-Aluminium alloys - Test methods

ISO 3613:2010, para 5.6 B

ELECTROTECHNICAL PRODUCTS

Cr VI IHM SHC-TP231-CCL to meet the requirements of IEC 62321-7-1: 2015

B

Pb,Cd,Hg & Cr IHM SHC-TP232-CCL to meet

the requirements of IEC 62321-3-1:2013 using XRF Screening IHM SHC-TP231-CCL to meet the requirement of IEC 62321-4:2013 & IEC 62321-5:2013 by using ICP-OES

B

PBB & PBDE IHM SHC-TP046-CCL to meet

the requirements of IEC 62321:-6:2015 Using GC-MS and HPLC-DAD

B

PLASTIC MATERIALS IN CONTACT WITH FOOD

Overall Migration EN 1186-1:2002 EN 1186-3:2002 EN 1186-9:2002

2710

Accredited to

ISO/IEC 17025:2005












Location

Code

PLASTIC MATERIALS IN CONTACT WITH FOOD (cont’d)

Overall Migration (cont’d) Testing in support of European Directives 2007/19/EC & 2002/72/EC and EU 10/2011 (citing 82/711/EC & 85/572/EEC) and its amendments By article filling or total immersion

B

PRODUCTS INTENDED TO COME INTO CONTACT WITH SKIN

Release of nickel from products (intended to come into contact with skin)

EN 12472:2005 + A1:2009 EN 1811:2011 +A1:2015

B

Spectacle frames EN 16128:2011

B

Using ICP OES or AAS Physical/Mechanical and Safety

tests

OUTDOOR FURNITURE - Seating and Tables for camping, domestic and contract use

General Safety requirements BS EN 581-1:2017 EN 581-1:2017 DIN EN 581-1:2017

B

Mechanical Safety requirements BS EN 581-3:2017 EN 581-3:2017 DIN EN 581-3:2017

B

FURNITURE Mechanical Safety, Strength and

Durability EN 581-2:2015 EN 1728:2012 EN 1022:2005 BS EN 1730:2012 BS EN 12520:2015 BS EN 12521:2015

B

OFFICE CHAIRS Mechanical Safety, Strength and

Durability ANSI BIFMA X 5.1:2017 B

SKATEBOARDS Safety Multi-roller tester EN 13613:2009

B

END

Schedule of Accreditation United Kingdom Accreditation Service … · 2710 Accredited to ISO/IEC 17025:2005 Schedule of Accreditation issued by United Kingdom Accreditation Service

Documents