max. See product label *A = Seal cut back: Schall-Ex® Slide GS-A Fitting Instructions 1 2 All dimensions in mm Tools 1.1 1.2 Measure length of door (L). L 44.5 15.4 2.1 2.2 2.3 Schall-ex-slide-gs-a/F/1.0.0 1.1 Included: 1 x Schall-Ex Slide GS-A Sliding door drop seal 11 1.2 Right hand actuation Left hand actuation The actuator can be moved based on which side the door closes into the stop. Simply remove the end brackets, pull out the seal from the housing, flip and relocate brackets. L A (*see cut back) L L The seal needs to be the same size as door length (L). Measure the seal from actuator end, making sure to mark the cutting point on the seal and the aluminium backing strip. Partially remove the silicone gasket to cut the seal and the aluminium backing strip at door length (L). Please ensure to consider max cut back (A). Replace silicone gasket and cut to size with scissors or a stanley knife. 2.1 2.2 2.3 1 x Schall-Ex Slide GS-A Aluminium backing strip Actuating block (not supplied)