Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Bidder Name
:
NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #
Sl.
No.
Item Description Quantity Units Estimated Rate TOTAL AMOUNT
Without Taxes
TOTAL AMOUNT
In Words
1 2 4 5 6 53 55
1 Providing and fabricating reinforcement for R.C.C. work
including straightening, cutting, bending, placing in
position and binding (including cost of binding wire) all
complete up to floor three level. Tremo Mechanically
treated bars( TATA, SAIL,VIZAC-RINL)
1732.00
kg 70
121240.0000 INR One Lakh Twenty One Thousand Two Hundred &
Forty Only
2 Random Rubble stone masonary for superstructure above
plinth level one storey height above 30 Cm. thick walls IS
1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-
Sand).28.40 Cum 3464.00
98377.6000 INR Ninety Eight Thousand Three Hundred & Seventy
Seven and Paise Sixty Only
3 Pillar masonry including bed plates as per specifications.
Bed plate to be paid separately.
3.00 Cum 401.00
1203.0000 INR One Thousand Two Hundred & Three Only
4 Extra for facing as per design and detailed specifications
IS 1597 (Part-II) 1992 including additional cost of stones
over item No. 6.1 & 6.2 for : Course rubble facing First
Sort.27.20 Sqm 322.00
8758.4000 INR Eight Thousand Seven Hundred & Fifty Eight and
Paise Forty Only
5 Course rubble facing Second Sort.78
Sqm 227.00
17706.0000 INR Seventeen Thousand Seven Hundred & Six Only
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this
tender. Bidders are allowed to enter the Bidder Name and Values only )
Percentage BoQ
Tender Inviting Authority: MUNICIPAL CORPORATION,JODHPUR
Name of Work :- Construction of vachanalay at first floor on balaji road
Contract No: NIT No Date Sno
Validate Print Help
Sqm 227.00
6 Add extra for rock facing using Jodhpur white sand
stone with porper projection and chisal dressing of edges
of stone 2 line dressing for building corners,jambs
including uniform joints.
27.3 Sqm 233
6360.9000 INR Six Thousand Three Hundred & Sixty and Paise
Ninety Only
7 Reinforced cement concrete work in beams, suspended
floors, roofs, girders having slopes up to 15o
, landings,
balconies, shelves, chajjas, lintels, bands, plain windows
sills, staircases and spiral staircases, up to floor three level
including curing, compaction, finishing with rendering in
cement sand mortar 1:3 (1-Cement:3-coarse sand) and
making good and joints excluding the cost of centering,
shuttering and reinforcement IS 456-2000:with 1:1.5:3 (1-
Cement:1.5 coarse sand:3-graded stone aggregate 20 mm
nominal size).
11.224 Cum 4832
54234.3680 INR Fifty Four Thousand Two Hundred & Thirty Four
and Paise Thirty Seven Only
8 Centering and shuttering with plywood or steel sheets
including strutting, propping, bracing both ways with
wooden members and removal of formwork for
superstructure up to 4.5 mtr above plinth, for:Suspended
floors, roofs, landings, staircases, balconies, girders,
cantilevers, bands , coping, bed plates, anchor blocks,
sills, chhajjas lintel, beam etc.
67.142
Sqm 266.00
17859.7720 INR Seventeen Thousand Eight Hundred & Fifty Nine
and Paise Seventy Seven Only
9 Pillar masonry including bed plates as per specifications.
Bed plate to be paid separately.2
Cum 401.00
802.0000 INR Eight Hundred & Two Only
10 Cement concrete flooring 1:3:6 finished in all respects
including rounding off edges etc. but excluding the cost of
nosing of steps etc. complete :50 mm thick with 20 mm
thick nominal size aggregate.30
Sqm 237.00
7110.0000 INR Seven Thousand One Hundred & Ten Only
11 Marble stone flooring table rubbed, 18-20 mm thick over
20 mm (Av.) thick base of CM 1:4 (1-Cement:4-coarse
sand) jointing with white cement mortar 1:2 (1-White
cement:2-marble dust) with pigment to match the shade of
the marble slab including grinding rubbing and polishing
complete IS 1130-1969.Rajnagar Ist quality with light
spots.Size upto 1501 to 3600 Cm2
36.10 Sqm 992.00
35811.2000 INR Thirty Five Thousand Eight Hundred & Eleven
and Paise Twenty Only
12 Pointing on stone masonary in cement sand mortar 1:3 (1-
Cement:3-Sand) :Deep grooved pointing
70.20 Sqm 105.00
7371.0000 INR Seven Thousand Three Hundred & Seventy One
Only
13 Deep groove pointing on stone masonry in white cement
sand mortar (1:3) with colour pigment of approved shade
for all type of masonry incl. racking of joint as per
specification complete in all respect.
28.08 Sqm 144.00
4043.5200 INR Four Thousand &Forty Three and Paise Fifty
Two Only
14 Plaster on new surface on wall in cement sand mortar 1:4
including raking of joints etc. complete fine finish
:25mmth 125.58 Sqm 204.00
25618.3200 INR Twenty Five Thousand Six Hundred & Eighteen
and Paise Thirty Two Only
15 Finishing wall with water proofing cement paint of
approved brand and manufacture and or required shade to
give an even shade including all scaffolding: New work
(Three or more coats).
28.08
Sqm 71.00
1993.6800 INR One Thousand Nine Hundred & Ninety Three
and Paise Sixty Eight Only
16 Providing and applying white cement based putty over
plastered surface to prepare the surface even and smooth
complete 125.58
Sqm 68.00
8539.4400 INR Eight Thousand Five Hundred & Thirty Nine and
Paise Forty Four Only
17 Providing & fixing steel glazed doors, windows and
ventilators shutters of standred rolled steel section joint
mitred and welded with steel 13x3mm lugs 10 Cm. long
embedded in cement concrete blocks 15x10x10 Cm. of
1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate
20 mm nominal size) or with wooden plugs and screws or
rawl plugs and screws or with fixing clips or with bolts
and nuts as required, including providing and fixing of
plain glass panes 4mm thick with copper glazing clips and
special metal-sash putty of approved make, or metal
beading with screws complete including priming coat of
approved steel primer, excluding the cost of metal beading
and other fittings except necessary hinges of pivots steel
handles and peg stay etc. as required. IS 1038-1983.
Ventilator centre hung
1.08
Sqm 2201.00
2377.0800 INR Two Thousand Three Hundred & Seventy Seven
and Paise Eight Only
18 windows side hung (Openable)
6.48
Sqm 2146.00
13906.0800 INR Thirteen Thousand Nine Hundred & Six and
Paise Eight Only
19 Supplying and fixing fixed wire gauge of 14 mesh x 24
gauge to the metal frame of rolled section by metal
beading 20x3mm with suitable screw at not exceeding
150mm distance.7.56
Sqm 547.00
4135.3200 INR Four Thousand One Hundred & Thirty Five and
Paise Thirty Two Only
20 Providing and fixing Square bars or other flat welded to 4260.0000 INR Four Thousand Two Hundred & Sixty Only20 Providing and fixing Square bars or other flat welded to
window, ventilators etc. 60
kg 71.00
4260.0000 INR Four Thousand Two Hundred & Sixty Only
21 Providing & fixing MS sheet single leaf door shutters in
angle iron frame 35x35x5 mm suitablly diagonally braced
with 25x3mm flat ironabove and below lock rail of size
50x5 mm beading extra includingall fittings, as per
direction of engg. incharge but excluding coes of chokhats
including two coats of anti corrastie red oxide primer
panit.MS sheet 20 SWG
6.62
Sqm 2195.00
14530.9000 INR Fourteen Thousand Five Hundred & Thirty and
Paise Ninety Only
22 Providing and fixing T-iron frames for doors, windows
and ventilators of mild steel Tee-sections, joints mitred
and welded with 15x3 mm lugs 10 Cm. long embedded in
cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-
Cement:3-coarse sand:6-graded stone aggregate 20 mm
nominal size) or with wooden plugs and screws or rawl
plugs and screws or with fixing clips or with bolts and
nuts as required including fixing of necessary butt hinges
and screws and applying a priming coat of approved steel
primer.
81
kg 82.00
6642.0000 INR Six Thousand Six Hundred & Forty Two Only
23 Cement concrete flooring grade 1:2:4 (1-Cement:2-
Coarse sand:4-graded stone aggregate) rounding off
edges etc. but excluding the cost of nosing of steps etc.
complete IS 2571-1970 :50 mm thick with 20 mm thick
nominal size aggregate.
39.3816
Sqm 281.00
11066.2296 INR Eleven Thousand &Sixty Six and Paise Twenty
Three Only
24 Painting with enamel paint of approved brand and
manufacture to give an even shade: Two or more coats on
new work. 13.23
Sqm 54.00
714.4200 INR Seven Hundred & Fourteen and Paise Forty Two
Only
25 Supplying and fixing rough dressed stone sills, dassa,
coping, cornices sriwan, string courses etc. in cement
mortar 1:4 including pointing with admixture of pigment
matching with the stone shade :75 mm thick.15.075
Sqm 1520.00
22914.0000 INR Twenty Two Thousand Nine Hundred & Fourteen
Only
26 Extra for subsequent storey or height of 4.5 Mtr. or part
thereof for all masonary work. Quantity in Sqm. 120
Sqm 24.00
2880.0000 INR Two Thousand Eight Hundred & Eighty Only
27 Quantity in Cum.50
Cum 98.00
4900.0000 INR Four Thousand Nine Hundred Only
28 Add extra for every additional 1 m span or part there off
beyond 6 m span for shuttering of beams only. 201.426
Sqm 16.00
3222.8160 INR Three Thousand Two Hundred & Twenty Two
and Paise Eighty Two Only
29 Add extra for RCC work in superstructure above floor
three level for each subsequent floor level or part there of
for item no.4.2 to 4.7 (IS 456-2000).11.224
Cum 42.00
471.4080 INR Four Hundred & Seventy One and Paise Forty
One Only
30 Add extra over item No. 4.13.1 to 4.13.4 in
superstructure above floor three level for subsequent floor
level or part there of. 1732
kg 0.43
744.7600 INR Seven Hundred & Forty Four and Paise Seventy
Six Only
Total in Figures 509794.2136 Five Lakh Nine Thousand Seven Hundred & Ninety
Four and Paise Twenty One Only
Quoted Rate in FiguresSelect
0.0000 INR Zero Only
Quoted Rate in Words INR Zero Only
S.No. Item no Item No. L W H Qty. Unit Rate In Rs. amount
32.3
Cement plastering including T&P, scaffolding, material and
complete labpour, including cost of water, curing, racking of joints
etc. with 15mm cement plaster on the rough side of single or half
brick wall of mix :
32.3.2 1:6 (1 cement : 6 fine/ coarse sand) 1.00 6.00 7.20 43.20
43.20 Sqm 192.00 8294
2 10.2
Providing and fixing 50 mm dia G.I. steel pipe railing in 3 rows duly
painted on medium weight steel channels (ISMC series) 100 mm x
50 mm, 1.2 metres high above ground, 2 m centre to
centre,complete as per approved drawings including all material,
labour.1.00 35.00 35.00 Mtr 2040.00 71400
29.14
Providing and fixing T-iron frames for doors, windows and
ventilators of mild steel Tee-sections, joints mitred and welded with
15x3 mm lugs 10cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) or with wooden plugs and screws or
with dash fastener or rawl plugs and screws or with fixing clips or
with bolts and nuts as require including fixing of necessary butt
hinges and screws and applying a priming coat of approved steel
primer
3.00 51.00 153.00 kg 71.00 10863
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions
and corners, all necessary fittings complete, including applying a
priming coat of approved steel primer.
D-2 4.00 0.90 2.10 7.56
1.00 5.50 1.90 10.45
W 4.00 1.10 1.20 5.28
23.29 Sqm 2790.00 64979
29.12
Providing and fixing factory made ISI marked steel glazed
doors,windows and ventilators side /top /centre hung with beading
and all members such as F7D, F4B, K11 B and K12 B etc. complete
of standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and rivetted with 15x3mm lugs, 10cm
long,embedded in cement concrete blocks 15x10x10cm of 1:3:6
(1cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size) or with wooden plugs and screws or rawl plugs and
screws or with fixing clips or with bolts and nuts as required,
including providing and fixing of hinges, pivots, float glass panes
with glazing clips and special metal sash putty of approved make
and a priming coat of approved steel primer excluding the cost of
metal beading and other fittings except necessary hinges or pivots
complete as per approved design.
6.00 1.20 1.20 8.64
8.64 Sqm 3040.00 26266
29.26
Steel work welded in built up sections/ framed work including
cutting,hoisting, fixing in position and applying a priming coat of
approved steel primer using structural steel etc. as required
.
29.26.2In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works.1.00 150.00
150.00 Kg 87.50 13125
29.28
Providing and fixing GI wire gauge of average width of aperture
1.56mm with wire of 0.45mm to existing steel door, window shutter
frames with necessary M.S. strip beading 20x3mm with suitable
screw at not exceeding 150mm distance etc. complete
.
4.00 1.80 0.60 4.32
4.00 1.80 1.20 8.64
4.00 1.10 1.20 5.28
18.24 Sqm 495.00 9029
27.11
Providing and fixing 1st quality standard white, grey, ivory, fume red
brown, light green, light blue and other light shades glazed tiles
confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in
walls, floors, steps, pillars etc. laid on a bed of neat cement slurry
finished with flush pointing in the white cement mixed with pigment
to match the shade of the tile complete (excluding the cost of
cement plaster on walls and pillar).
1.00 11.00 1.60 17.60
17.60 Sqm 669.00 11774
41.1
Wiring of light point / fan point / exhaust fan point / call
bell point with 1.5 sq. mm FR PVC insulated unsheathed
1.1kV grade flexible copper conductor and 1.5 sq.mm
FR PVC insulated copper earth conductor (IS:694) of
approved make in double lock/ ISI marked single lock
pvc casing capping & it's accessories, 18 SWG M.S.
box with earth terminal, screwless cage connectors for
neutral looping in switch board & false ceiling point, 6 A
switch 3.0 mm thick phenolic laminated sheet, zinc
plated / brass screws, cup washers , making
connections, testing etc. as required.
41.1.1 Short point (up to 3 mtr.) 12.00 12.00 p.point 230.00 2760
41.1.2 Medium point (up to 6 mtr.) 10.00 10.00 p.point 322.00 3220
BASED ON RUIDP BSR, 2017
3
1
4
9
JODHPUR MUNICIPAL CORPORATION, JODHPUR
Name of work: Const. of remaining work at first floor of community hall in ward no 13. (Part-B).
5
6
7
8
41.1.3 Long point (up to 10 mtr..) 6.00 6.00 p.point 487.00 2922
41.3
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm
FR PVC insulated unsheathed 1.1 kV grade flexible
copper conductor and 1.5 sq.mm FR PVC insulated
unsheathed 1.1 kV grade copper earth conductor
(IS:694) of approved make double lock/ ISI marked
single lock pvc casing capping & it's accessories, 18
SWG M.S. box with earth terminal, screwless cage
connectors for neutral looping in switch board & falce
ceiling point, 6 A switch, 6 A socket, 3.0 mm thick
phenolic laminated sheet, zinc plated / brass screws,
cup washers, making connections, testing etc. as
required.
41.3.1 On board 16.00 16.00 p.point 79.00 1264
44.1
Supplying and drawing FR PVC insulated & unsheathed
flexible copper conductor ISI marked (IS:694) of 1.1 kV
grade and approved make in existing surface or
recessed conduit/casing capping including making
connections etc. as required.
44.1.2 2 x 1.5 sq.mm 16.00 25.00 400.00 mtr 26.00 10400
44.1.7 2 x 2.5 sq.mm 11.00 30.00 330.00 mtr 42.00 13860
46.1
P&F 240/415 V MCB of breaking capacity not less than
10 KA (B/ C/ D tripping characteristic) ISI marked IS
8828(1996)]/ conforming to IEC 60898 in existing
board/sheets including making connections with lugs,
testing etc. as required.
46.1.1.2 6 A to 32 A rating 10.00 10.00 Each 161.00 1610
46.1.1.3 40A to 63 A rating 3.00 3.00 Each 320.00 960
46.5
P&F Recessed/ Surface mounting heavy duty horizontal
type sheet steel Distribution board phophatised/ powder
painted complete with copper bus bar, shorting link ,
neutral link, earth link and din bar masking sheet
conforming to IS13032 & IS8623 including making
internal DB terminations with copper lugs , testing etc.
as required.
46.5.1.4 12 Way 2.00 2.00 Each 1045.00 1045
51.1
Providing & Laying XLPE insulated / P.V.C. sheathed
cable of 1.1 KV grade with aluminium conductor
Armoured of IS:7098-I/1554-1 approved make in
ground as per IS:1255 including excavation of
30cmx75cm size trench, 25 cm thick under layer of
sand, second Class bricks covering, refilling earth,
compaction of earth, making necessary connection,
testing etc. as required of size.
51.1.3.1 6.0 Sq.mm 2 core 21.00 21.00 mtr 131.00 2751
55.4
P & F double ball bearing capacitor start ceiling fan of
approved make complete with regulator and other
accessories as required. (for estimation purpose only)
55.4.3 1200 mm sweep 3.00 3.00 Each 1481.00 4443
16 55.5
P & F 1.6 mm thick M.S. Recessed fan box, hexagonal/
round of size 100 mm dia, depth 75mm, 12 mm dia rod
fan hook with 100 mm length extended on each side . 3.00 3.00 Each 114.00 342
57.1
P & F strip type fluorscent tube fitting fabricated from
(CRCA sheet and finished with powder coating / stove
enamelled paint)/(extruded non corrosive UV resist EP
channel) complete with accessories like (OCCB, starter,
starter seat)/ EB, rotor holder, terminal block duly
prewired with copper conductor including making
connection, testing etc. as required. ( without tube)
57.1.2 1 X 36 Watts with OCCB 3.00 3.00 Each 277.00 831
57.7 P & F Fluorscent tube rod in existing fixtures as required
57.7.1.2 36/40 Watts Flourscent powder coated 3.00 3.00 Each 36.00 108
57.9P & F Capacitors for power factor improvement in
existing fluorscent lamp fixture as required.
57.9.1 4 Mfd 250 V3.00 3.00 Each 115.00 345
57.1P & F starter for existing fluorscent lamp fixture as
required.
57.10.1 FSU 3.00 3.00 Each 10.00 30
21 29.3
Providing and fixing in position collapsible steel shutters with
vertical channels 20x10x2mm and braced with flat iron diagonals
20x5mm size with top and bottom rail of T-iron 40x40x6mm with
40mm dia,steel pulleys complete with bolts, nuts, locking
arrangement stoppers, handles, including applying a priming coat of
approved steel primer.
1.00 2.95 3.05 9.00 Sqm 5280.00 47507
57.13
P & F of surface/ recess mounting CFL luminaire made
from powder coated CRCA sheet with aluminium
reflector assembly electrochemicaly brightened and
anodized cross louvers, complete with accessories e
copper ballast, starter, holder, terminal block duly
prewired with copper conductor including making
connections, testing etc. as required (without lamp)
57.13.2 Recess mounting 2 X PL-9/11 Watt10.00 10.00 each 753.00 7530
57.18
P & F energy efficient direct fit (Retrofit) composite
compact fluorscent lamp of energy saving labelling not
less than 3 star in existing holder/ fixture as required.
57.18.311 Watt
10.00 10.00 each 106.00 1060
318718Total
19
10
11
13
17
18
Say Rs 3.19 Lacs
20
14
15
12
22
23