55 54 Design The most important component in our projects isn’t the new CAD-CAM technology - it’s the human element! 1.4 Scame by VLM LAMPHOLDERS AND INLINE SWITCHES Section 1.4
5554
Design
The most important componentin our projects isn’t the new
CAD-CAM technology - it’s thehuman element!
1.4
Scame by VLM
LAMPHOLDERS AND INLINE SWITCHES
Section 1.4
56
LAMPHOLDERS
LAMPHOLDERS AND INLINE SWITCHES
GENERAL DESCRIPTION
As part of its commercial programme, aimed atimproving and further extending the services alreadysupplied to its trading partners, SCAME PARRE S.p.Ahas entered into a collaborative agreement with VLMS.p.A of Buccinasco (Milan). The objective of thisunderstanding is the assembly and distribution of arange of lampholders, switches and in-line switches.These products are already known in the market asthe best currently available and they are being offeredwith an extremely favourable quality/price ratio.Their technical characteristics are described in thissection. The packaging has been designed to meetthe needs of wholesale distributors. Service anddelivery is of the usual high standard.
VERSIONS
The following versions are available:
- Lampholders:for incandescent lamps (E14-E27)for fluorescent lamps (G5-G23)for halogen lamps (G4-GX5 3-GY6.35-R7s)
- Switchespress switchespull switchesslide in-line switchesfoot switches
- Ceiling accessories
Thermoset lampholders:left, with E27 coupling, partly threadedskirt and metal nipple; right, with E14coupling, fully threaded skirt andmoulded thread.
Metal lampholderDetail of locking screw and earth terminal.
Slide in-line switch, with neutralconnection for flat cable.
E14E27 B22
TYPE OF COUPLING
G4GZ4GX5,3GY6,35 R7s G23
Rx7sRx7s-24Rx7s-26Rx7s-32 G5
International Standard IEC 60238European Standard EN 60238
Edison screwlampholders
1992 edition
International Standard IEC 60400European Standard 60400
Lampholders for tubular fluorescent lamps and starterholders
1992 edition
International Standard IEC 60838-1European Standard EN 60838-1
Miscellaneous lampholdersPart 1: General requirements and tests
1994 edition
Norma Internazionale IEC 61058-1Norma Europea EN 61058-1
Switches for appliancesPart 1: General requirements
CEI 23-11Switches for appliances
Part 1: General requirements
1992 edition
REFERENCE STANDARDS
57
1.4
CANDLE LAMPHOLDERS- in thermoplastic material- metal bracket
CATALOGUETYPE OF COUPLING BRACKET FIXING WITH PACK QTY. NUMBER
h 70 mmNipple and screw 50/500 190.4570S
E14Plastic thread 50/500 190.4570ES
h 85 mmNipple and screw 50/500 190.4585S
Plastic thread 50/500 190.4585ESFixing thread: M10 x 1
Fixing thread: M10 x 1 Nipple andlocking screw
Nipple and screw Plastic thread
CANDLE DRIP COVER- in thermoplastic material- available in white or ivory
CATALOGUETYPE OF COUPLING HEIGHT COLOUR PACK QTY. NUMBER
h 70 mm50/300 190.C70A
E1450/300 190.C70B
h 85 mm50/300 190.C85A
50/300 190.C85B
PLASTIC CANDLESReference standard EN 60238
TV & Phone
Plugs andsockets
Adaptors
Domestic cablereels
Lampholders
Plugs andsockets
Interlockedsockets
Switchgear
Distributionassemblies
Adaptors
Industrialcable reels
Light fittings
Accessories
Wire connectors
Conduits
Trunking
Index
Plates and devices
Enclosures
58 59
LAMPHOLDERS
CATALOGUETYPE OF COUPLING DIMENSIONS COLOUR PACK QTY. NUMBER
Ø 48x8mm 50/500 190.71
Ø 48x8mm 50/500 190.71B
E27 In thermoplasticØ 58x13mm
50/500 190.73N
50/500 190.73B
Ø 65x12mm50/500 190.74N
50/500 190.74B
Ø
SHADE RING-Reference standard EN 60399-To be used with threaded skirt lampholders-Lampshade holding ring
E27
FOR INCANDESCENT LAMPSReference standard EN 60238 E27
CATALOGUETYPE OF COUPLING SKIRT CAP* COLOUR PACK QTY. NUMBER
Threaded metal entry50/300 i 190.7175
50/300 i 190.7175B
Smooth Threaded metal entry 50/300 i 190.7175T
and earth terminal
Threaded plastic entry50/300 i 190.7175G
50/300 i 190.7175GB
Threaded metal entry50/300 i 190.7200
50/300 i 190.7200B
E27 Threaded Threaded metal entry 50/300 i 190.7200T
and earth terminal
Threaded plastic entry50/300 i 190.7200G
50/300 i 190.7200GB
Threaded metal entry50/300 i 190.7350
50/300 i 190.7350B
Threaded metal entry 50/300 i 190.7350T
and earth terminal
Threaded plastic entry50/300 i 190.7350G
50/300 i 190.7350GB(*) Entry: M10 x 1
THERMOSETTING- Cable 2.5mm2 (max)
190.7175
190.7200
190.7350
Parzialmentefilettata
CATALOGUETYPE OF COUPLING DIMENSIONS COLOUR PACK QTY. NUMBER
Ø 43x15mm 50/500 190.31
E14 In thermoplastic Ø 43x15mm 50/500 190.31B
Ø 43x8,5mm 50/500 190.147B
1.4
FOR INCANDESCENT LAMPSReference standard: EN 60238
CATALOGUETYPE OF COUPLING SKIRT CAP* COLOUR PACK QTY. NUMBER
Threaded metal entry100/600 i 190.3175
Smooth100/600 i 190.3175B
Threaded metal entry100/600 i 190.3175G
100/600 i 190.3175GB
Threaded metal entry100/600 i 190.3200
Threaded100/600 i 190.3200BE14
Threaded plastic entry100/600 i 190.3200G
100/600 i 190.3200GB
Threaded metal entry100/600 i 190.3350
100/600 i 190.3350B
Threaded plastic entry100/600 i 190.3350G
100/600 i 190.3350GB(*) Entry: M10 x 1
THERMOSETTING- Cable 2.5mm2 (max)
Partlythreaded
Ø
SHADE RING- Reference standard EN 60399- To be used with threaded skirt lampholders- Lampshade holding ring
E14
E14
190.3175
190.3200
190.3350
TV & Phone
Plugs andsockets
Adaptors
Domestic cablereels
Lampholders
Plugs andsockets
Interlockedsockets
Switchgear
Distributionassemblies
Adaptors
Industrialcable reels
Light fittings
Accessories
Wire connectors
Conduits
Trunking
Index
Plates and devices
Enclosures
6160
LAMPHOLDERS
FOR INCANDESCENT LAMPSReference Standard EN 60238 (IEC 60238)
THERMOSETTING RESIN - T230 °C- 2 holes for screw fixing- Screw terminals- Cable: 4mm2 (max)- White colour
14,5÷18
53,5
39,2
ø53,8
ø70,5
77,5
190.5778B
190.5727
TYPE OF CATALOGUECOUPLING SUPPORT FIXING (mm) COLOUR PACK QTY. NUMBER
/ 14,5 ÷ 18 20/200 i 190.5778B
for 7.2x8.2 slot or 10.5 hole (*) i 190.5778/304TClip for 39x36 profiled hole 20/200 i 190.5778/306
E27 for 41x36 profiled hole i 190.5778/306L
internal with earth screw i 190.5778/311TBracket external with earth screw 20/200 i 190.5778/313T
plastic thread M10x1 i 190.5778/348(*) earth terminal
FOR LIGHTING CHAINS- IPX4 if assembled with gasket- Max. lamp power: 40W- Perforating contacts for flat cable 5x13mm H05RNH2-F 2x1.5mm2
- Screws that cannot be unscrewed
TYPE OF CATALOGUECOUPLING DESCRIPTION COLOUR PACK QTY. NUMBER
E27Lampholder* 500 190.5727
Inside gasket IPx3 - IPx4 500 190.393NFix the inside gasket using silicon glue* Gasket not included
190.5740B1
CERAMIC - T270°C- Unscrewing brake- Screw terminals- Cable section 1.5-4mm2
TYPE OF CATALOGUECOUPLING DESCRIPTION COLOUR PACK QTY. NUMBER
E40 Lampholder with mounting 10 i 190.5740B1bracket and brake
(Dimensions in mm)
1.4
TYPE OF EARTH CATALOGUECOUPLING SKIRT CAP* TERMINAL COLOUR PACK QTY. NUMBER
E27 Threaded Threaded metal entryNO 50/300 i 190.8200
YES 50/300 i 190.8200T(*) Entry: M10 x 1
FOR INCANDESCENT LAMPSReference standard EN 60238
BRASS PLATED METAL - T210 °C- Screw terminals- Cable: 2.5mm2 (max)- With locking screw- With tube stop- Golden colour
190.8200
SHADE RING- Reference standard EN 60399- To be used with threaded skirt lampholders- Lampshade holding ring
TYPE OF CATALOGUECOUPLING DESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER
E27 In metallo ottonato Ø 58,5x15mm 50/500 i 190.81
SURFACE MOUNTING LAMPHOLDER- Reference standard: EN 60598-2-1 (IEC 60598-2-1)- Protection degree: IP20- White colour- Wall installation- Double insulation e- Suitable for being installed on usually flammable surface
TYPE OF CATALOGUECOUPLING DESCRIPTION COLOUR PACK QTY. NUMBER
E27 Max 60W 1 i 190.100
E27
190.100
E27E40
E27
F
TV & Phone
Plugs andsockets
Adaptors
Domestic cablereels
Lampholders
Plugs andsockets
Interlockedsockets
Switchgear
Distributionassemblies
Adaptors
Industrialcable reels
Light fittings
Accessories
Wire connectors
Conduits
Trunking
Index
Plates and devices
Enclosures
6362
LAMPHOLDERS
FOR HALOGEN LAMPSReference standard: EN 60838-1
FIXING CATALOGUEDIMENSIONS HOLES PACK QTY. NUMBER
Ø 17x10,2mm N° 2 x 3,3mm 100/1000 i 191.5031
CATALOGUEDIMENSIONS FIXING HOLE PACK QTY. NUMBER
Ø 19x24,8mm Ø 14mm 50/500 i 191.5124
FOR LOW VOLTAGE HALOGEN LAMPS- Type of coupling: G4/GZ4/GX5.3/GY6.35- Made of steatite- Push-in terminals- Cable: Teflon-Fep 150mm
FOR HALOGEN LAMPS - WITH BRACKET- Type of coupling: R7s- Made of steatite- Bracket with central hole and slots- Cable: Teflon-Fep 200mm
CATALOGUEDIMENSIONS CENTRAL HOLE SLOTS PACK QTY. NUMBER
140mm Ø 4,5mm N°2 (4,2x14,2mm)* 20/200 i 191.5122
144,5mm Ø 3,4mm N°2 (4,2x9,2mm) 20/200 i 191.5123
104,5mm Ø 3,4mm N°2 (Ø 4,2mm) 20/200 i 191.5123C* Profiled
FOR HALOGEN LAMPS- Type of coupling: R7s/RX7S/RX7S-24/RX7S-26/RX7S-32- Made of aluminium and steatite- With fixing nut: M14 X 1- Cable: Teflon-Fep 200mm
191.5031
191.5122
191.5123
191.5123C
191.5124
11÷12
140
50
70
128
94
144,592,5
55
124
85
24
53,5
104,5
24,8
17,8
7
Ø 19
(Dimension in mm)
1.4
TYPE OF CATALOGUECOUPLING DESCRIPTION COLOUR PACK QTY. NUMBER
G5 2A - 250V - T110°C 100/1000 i 191.6001B
FOR FLUORESCENT TUBES - T110 °C- Made of polycarbonate- For fluorescent tubes Ø 16 mm- Push fit- Push-in terminals- Recommended stripping 8 ± 1 mm- Phosphor bronze contacts- White colour- Rigid or prepared flexible conductor 0.5 - 1mm2
FOR FLUORESCENT LAMPSReference Standard EN 60400
FOR FLUORESCENT LAMPS - T140 °C- Made of polyester glass-fibre filled- Push fit- Push-in terminals- Recommended stripping 8 ± 1 mm- Phosphor bronze contacts- Rigid or prepared flexible conductor 0.5 - 1mm2
- White colour
Assembling indications:
Mounting profiles and material thickness
191.6001B Thickness: 0.6 - 1.2mm191.5010B Thickness: 0.7 - 1mm
4W = 136,0mm6W = 212,2mm
8W = 288,4mm13W = 517,0mm
TYPE OF CATALOGUECOUPLING DESCRIPTION COLOUR PACK QTY. NUMBER
G23 2A - 250V - T140°C 50/500 i 191.5010B
22
19
27
3,516
26
34,5
30
31,2
191.6001B
191.5010B
20
10
(Dimensions in mm)
TV & Phone
Plugs andsockets
Adaptors
Domestic cablereels
Lampholders
Plugs andsockets
Interlockedsockets
Switchgear
Distributionassemblies
Adaptors
Industrialcable reels
Light fittings
Accessories
Wire connectors
Conduits
Trunking
Index
Plates and devices
Enclosures
6564
SWITCHES
SINGLE POLE SWITCHESReference Standard EN 61058-1
CATALOGUEDESCRIPTION SHANK COLOUR PACK QTY. NUMBER
M10 x 1 h8 mm 100 i 195.115B2 (1) A / 250VM10 x 1 h12 mm 100 i 195.116B
PRESS SWITCHES - T125 °C- Single pole press switches- Push in terminal- Also for inductive current- White colour- With locknut- NTR 1119/IMQ- Cable: 1mm2 (max)
CATALOGUEDESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER
20 i 195.450B2 A / 250V 55x24x15 mm 20 i 195.450N
20 i 195.450P
SLIDE IN-LINE SWITCHES- Single pole slide in-line switches- With neutral connection for flat cable- Screw closed cover- ASEV approved- White, black or straw-coloured- Cable: 0.75mm2 (max)
CATALOGUEDESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER
20/160 i 195.565B
2 (1) A / 250V Ø 50x22,7 mm 20/160 i 195.565N
20/160 i 195.565P
FOOT SWITCHES e- Single pole foot switch- With neutral and earth terminals- Clip together case- Also for inductive current- White, black or straw-coloured - Cable: 0.75mm2 (max)
8
11,5
15
ø 3,2
27,5
12
195.115B
195.116B
195.450
195.565
CATALOGUEDESCRIPTION DIMENSIONS COLOUR PACK QTY. NUMBER
/ 20 i 195.200B2 A / 250V with bracket 20 i 195.200/327B
with vertical bracket 20/200 i 195.200/328B
PULL SWITCHES - T125 °C- Single pole switch with cord and white handle grip
(Dimensions in mm)
ACCESSORIES 1.4
CEILING ACCESSORIES
CATALOGUEDESCRIPTION COLOUR PACK QTY. NUMBER
50/500 190.363BThermoplastic
50/500 190.363N
CYLINDRICAL CEILING ROSE
CATALOGUEDESCRIPTION COLOUR PACK QTY. NUMBER
50/500 190.366BThermoplastic
50/500 190.366N
CONICAL CEILING ROSE
CATALOGUEDESCRIPTION COLOUR PACK QTY. NUMBER
50/250 190.376BThermoplastic
50/250 190.376N
SPHERICAL CEILING ROSE
Ceiling Rose
Decoration
TV & Phone
Plugs andsockets
Adaptors
Domestic cablereels
Lampholders
Plugs andsockets
Interlockedsockets
Switchgear
Distributionassemblies
Adaptors
Industrialcable reels
Light fittings
Accessories
Wire connectors
Conduits
Trunking
Index
Plates and devices
Enclosures