Scheme of Teaching and Examinations for I Semester DIPLOMA in Electrical/Mechanical/CSE (Group-I) THEORY Sr. No. SUBJECTS SUBJECT CODE TEACHING SCHEME EXAMINATION – SCHEME Periods per Week Periods in one Session (Year) Hours of Exam. Terminal Exam. (A) Marks Final Exam. (B) Marks Total Marks (A+B) Pass Marks Final Exam. Pass Marks in the Subject 1. Engineering Mathematics-I 01101 06 60 03 20 80 100 26 36 2. Engineering Physics 01102 04 50 03 20 80 100 26 36 3. Engineering Chemistry 01103 04 50 03 20 80 100 26 36 4. Elementary Mechanical Engineering & Engg. Material 01104 04 60 03 20 80 100 26 36 5. Language & Communication Skill 01105 04 60 03 20 80 100 26 36 22 Total:- 500 PRACTICAL Sr. No. SUBJECTS SUBJECT CODE TEACHING SCHEME EXAMINATION – SCHEME Periods per Week Periods in one Session (Year) Hours of Exam. Marks Internal Exam. (A) Marks External Exam. (B) Total Marks (A+B) Pass Marks Final Exam. Pass Marks in the Subject 6. Engineering Physics Lab. 01106 04 50 03 10 40 50 16 21 7. Engineering Chemistry Lab 01107 04 50 03 10 40 50 16 21 8. Workshop Practice. 01108 12 120 06 10 40 50 16 21 20 Total:- 150 SESSIONAL Sr. No. SUBJECTS SUBJECT CODE TEACHING SCHEME EXAMINATION – SCHEME Periods per week Periods in one Session (Year) Marks of Internal Examiner (X) Marks of External Examiner (Y) Total Marks (X+Y) Pass Marks in the Subject 9. Workshop Practice. 01109 - 40 60 100 50 Total:- 100 Total Periods per week 42 Total Marks = 750
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Scheme of Teaching and Examinations for
I Semester DIPLOMA in Electrical/Mechanical/CSE (Group-I)
PROFESSIONAL MATHEMATICS Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00301
06 00 00 Internal Exam. : 20 Rationale: A technical diploma holder is engaged generally as first line supervisor. He forms a bridge between workers and management. He has to understand the language of the modern management and communicate with the workers in their language. This subject will help accomplishment of the task in stipulated time, develop attitude towards cost effectiveness, selection of most effective alternative methods. This course will also help the student to tackle different numerical methods and computational techniques for problem solving in research organization as a programmer. Objective:
The course enables students to. • Managerial skill based on mathematical footing • The ability to find approximate solutions and/or answers to the problems where analytical methods become more complex. • To choose correct numerical techniques for a given problem. S.No. Topics Periods 01 GROUP –A (Numerical Methods) (20) 02 GROUP-B (Statistical Techniques) (20) 03 GROUP-C (Management Techniques) (20) Total: (60) CONTENTS: GROUP-A (NUMERICAL METHODS) (20)
01.01 Introduction to Numerical methods: Approximation and errors (Truncation & Round off). 01.02 Numerical solutions of non-linear and Transcendental equations: Iterative methods. Newton-Raphson’s
method. Bisection method and Regula-Falsi method.
01.03 Solution of Linear Simultaneous Equations: Gaussian Elimination method and Gauss-Jordan method. 01.04 Finite Difference: Backward and forward Differences. Finite Difference Interpolation Formula. Newton’s
Forward Difference formula and Newton’s Backward Difference formula.
01.05 Numerical Differentiation & Integration: Newton’s forward and backward differentiation formula. Trapezoidal Rule and Simpson’s 1/3 rule for numerical integration.
01.06 Difference equations. simple problem Only GROUP-B (STATISTICAL TECHNIQUES) [20] 02.01 Introduction to statistics: Measure of central tendencies: measures of dispersions: standard deviation and
variance for discrete and grouped data: assumed mean and step deviation methods.
02.02 Theory of Probability: Random events and their types. Probability of Events. Definitions. Laws of Probability (Addition and Multiplication Laws)
02.03 Probability Distribution: Introduction to Arithmetic Mean and Standard Deviation of a probability distribution. Important probability distribution – Binomial distribution. Poisson’s distribution & Their means and variance.
GROUP-C (MANAGEMENT TECHNIQUES) [20] 03.01 Linear Models 03.01.01 Introduction to Operations Research (O.R) Steps of O.R. 03.01.02 Linear Programming Problems: Formulation of a LPP. Mathematical Modelling and Solution by graphical
method.
03.01.03 Solution by Simplex Method: Basic Feasible Solution (Degenerator and Non-degenerator) 03.01.04 Transportation problem: Introduction and Solution Procedure-
(i) Finding the initial basic feasible solution by N-W Corner Rule, Least cost method and Vogel’s Approximation Method. (ii) Test of optimality by u-v method only.
03.01.05 Assignment Problem: Introduction and Solution Procedure–Fundamental theory underlying Hungarian Method.
03.02 Network Analysis. CPM & PERT: Introduction.
2
03.02.01 Basic concepts – Activities. Nodes. Edges. Networking of a project. Various times calculations. CPM to determine the optimal project schedule.
03.02.02 PERT- Definition, difference between CPM & PERT. Pessimistic times, optimistic times. Most likely times of various activities.
Books Recommended: Text Books 1. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Kanti Swaroop. P.K Gupta and Man Mohan 2. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Heera & Gupta 3. Operations Research. Macmillan Publishing Co. New York, 1982 - H.A.Taha 4. Computer based numerical algorithm, East West Press, 1975 - E.V Krishna Murthy & S.V. Sen 5. Computer oriented numerical method, Prentice Hall India, 1980 - V. Rajaraman
3
ENGINEERING MECHANICS Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00302
04 00 00 Internal Exam. : 20 Rationale: The subject forms an important part of Engineering curricula for developing the concepts required in the design of various structures. The subject deals with the basic concept of mechanic of body and the behaviour of material used in practice and in structures under varying load conditions. The first part of the subject deals with the applied mechanics science. Which describe the condition of body in rest or motion under the action of forces. In its preview come variety of general and specialized engineering disciplines concerned with analysis of structures and machines and the mechanism of their parts. In the Second part, the principles of strength of materials is introduced in which the student will learn to distinguish between different types of stress and strain and also the qualitative assessment of stress and strains in material element under the action of internal forces. Objective: Knowledge Workers will be able to:
• Analyze and understand the physical behaviour of members of engineering structures. • Acquire knowledge of various elements of structures. • Utilise the basic principles. • Develop skill to tackle field problem. • Solve the problems by the application of basic principles. • Judge the suitability of materials in design process.
S.No. Topics Periods PART-A
01 Introduction (02) 02 Vector Methods (02) 03 Introduction to system of forces and equilibrium (06) 04 Friction (04) 05 Kinematics and kinetics of a particle (03) 06 Kinematics and kinetics of rigid body (02) 07 Impulse and Momentum (02) 08 Work, Energy and Power (04) Total : (25)
PART-B 01 Simple stress and strains (07) 02 Elastic constants (03) 03 Center of Gravity (Centroid) (02) 04 Moment of Inertia (05) 05 Shearing force and bending moments (08) (25) Total : (50)
CONTENTS: PART-A TOPIC: 01 – INTRODUCTION: [02] Idealisation of mechanics; Concept of rigid body; External forces (Body forces & surface forces) Law of Mechanics. TOPIC: 02 VECTOR METHODS: [02] Equality and equivalence of vectors; Free and Bound vector; Moment of a force about a point and a line; Couple and moment of a couple.
TOPIC: 03 – INDTRODUCTION TO SYSTEM OF FORCES AND EQUILIBRIUM:
[06]
Statically equivalent force system; simplest equivalent of a system of forces; force analysis, free body diagram, equation of equilibrium.
4
TOPIC: 04 – FRICTION: [04] Basic Concept of different Friction (Static, Dynamic, Sliding, Rolling, Fluid). TOPIC: 05 – KINEMATICS AND KINETICS OF A PARTICLE: [03] Rectilinear and curvilinear translations; normal and tangential component of acceleration. TOPIC:06 – KINEMATICS AND KINETICS OF RIGID BODY: [02] Simple concept of Angular Velocity and angular acceleration. Effective forces on a rigid body. D’ Alembert’s principle.
TOPIC:07 – IMPULSE AND MOMENTUM: [02] Linear impulse and linear momentum, angular impulse and angular momentum, definitions only; TOPIC: 08 – WORK, ENERGY AND POWER: [04] Work done by forces and couples, potential and kinetic energy, work-energy; conservation of energy; concept of power and efficiency.
PART-B
TOPIC: 01 – SIMPLE STREES & STRAIN: [07]
01.01 Definition of various terms and their units (S.I. Units) 01.02 Stress and strain due to axial load and transverse load relation between stress and strain. Hook’s law. Studies of
stress strain curve. Factor of safety & working stress. Concepts of isotropic materials.
01.03 Stress & strain in simple section & composite bar. Stress & strain due to temperature variation. 01.04 Shrinking on hoop’s stresses. TOPIC: 02 – ELASTIC STRESS & STRAIN: [03] 02.01 Linear strain and lateral strain, poisson’s ratio, volumetric strain 02.02 Change in volume due to axial, biaxial & triaxial loading. Bulk modulus. 02.03 Shear stress and strain, modulus of rigidity. 02.04 Simple shear. Complementary shear stress. 02.05 Various Relations among modulus of elasticity, modulus of rigidity & bulk modulus.
TOPIC: 03 – CENTER OF GRAVITY (CENTROID): [02] 03.01 Definition of center of gravity & centroid. 03.02 Determination of C.G of various sections symmetrical and unsymmetrical sections. 03.03 Determination of C.G. of perforated sections. TOPIC: 04 – MOMENT OF INERTIA: [05] 04.01 Definition of M.I.; radius of gyration, second moment of area. 04.02 Parallel axis theorem & perpendicular axis theorem. 04.03 Derivation of M.I. of regular area-rectangular, triangular circular about centroidal axis. 04.04 M.I. of built up section, symmetrical and unsymmetrical about centroidal axis, modulus of sections. TOPIC: 05 – SHEARING FORCE & BENDING MOMENT: [08] 05.01 Types of beams and types of supports, types of loading. 05.02 Concept and definitions of shear force and bending moment, sign convention. 05.03 Shear force and bending moment diagrams for cantilever, simply supported beam, over hanging beam
for various types of loading & couples, point of contraflexure.
05.04 Relation between B.M, S.F. and rate of loading. Books Recommended: Text Books 1. Strength of Materials - R.S. Khurmi 2. Mechanics of Structure - S.B. Junarkar 3. Strength of Materials - Ramamrutham 4. Theory of Structure - Vazirini & Ratwani 5. Strength of Materials & Mechanics of Structure. - Punamia 6. Teaching plans of Strength of Material - T.T.T.I. Madras 7. nzO; lkeF;Z - xq:pj.k flag 8. Engineering Mechanics - I.H. Shames 9.
Engineering Mechanics - Beer & Johnson
10. Strength of material - S.K. Singh
5
COMPUTER PROGRAMMING THROUGH C Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00303
04 00 00 Internal Exam. : 20 Rationale: Computers play a vital role in present day life, more so, in the professional life of technician engineers. In order to enable the students use the computers effectively in problem solving, this course offers the modern programming language C along with exposition to various engineering applications of computers. Objective: The objectives of this course are to make the students able to: • Develop efficient algorithms for solving a problem. • Use the various constructs of a programming language viz. conditional, iteration and recursion. • Implement the algorithms in “C” language. • Use simple data structures like arrays, stacks and linked list solving problems. • Handling File in “C”. S.No. Topics
Periods
01 Introduction to Programming (03) 02 Algorithm for Problem Solving (08) 03 Introduction to ‘C’ Language (08) 04 Condition and Loops (07) 05 Arrays (07) 06 Functions (07) 07 Structures and Unions (04) 08 Pointers (06) Total : (50) CONTENTS: TOPIC: 01 – INTRODUCTION TO PROGRAMMING: [03] The Basic Model of Computation, Algorithms, Flow-charts, Programming Languages, Compilation, Linking and Loading, Testing and Debugging, Documentation. Programming Style-Names, Documentation & Format, Refinement & Modularity.
TOPIC: 02 – ALGORITHM FOR PROBLEM SOLVING: [08] Exchanging values of two variables, summation of a set of numbers. Reversing digits of an integer, GCD (Greatest Common Division) of two numbers. Test whether a number is prime. Organize numbers in ascending order. Find square root of a number, factorial computation, Fibonacci sequence. Compute sine Series. Check whether a given number is Palindrome or not. Find Square root of a quadratic equation. multiplication of two matrices,
TOPIC: 03 – INTRODUCTION TO ‘C’ LANGUAGE: [08] 03.01 Character set, Variable and Identifiers, Built-in Data Types, Variable Definition, Declaration, C
Key Words-Rules & Guidelines for Naming Variables.
03.02 Arithmetic operators and Expressions, Constants and Literals, Precedence & Order of Evaluation. 03.03 Simple assignment statement. Basic input/output statement. 03.04 Simple ‘C’ programs of the given algorithms TOPIC: 04 – CONDITIONAL STATEMENTS AND LOOPS: [07] 04.01 Decision making within a program 04.02 Conditions, Relational Operators, Logical Perator. 04.03 If statement, it-else statement. 04.04 Loop statements 04.05 Break, Continue, Switch TOPIC: 05 – ARRAYS: [07] What is an Array?, Declaring an Array, Initializing an Array. One dimensional arrays: Array manipulation: Searching, Insertion, Deletion of an element from an array; Finding the largest/smallest element in array; Two dimensional arrays, Addition/Multiplication of two matrices.
6
TOPIC: 06 – FUNCTIONS: [07] Top-down approach of problem solving. Modular programming and functions, Definition of Functions Recursion, Standard Library of C functions, Prototype of a function: Formal parameter list, Return Type, Function call, Passing arguments to a Function: call by reference; call by value.
TOPIC: 07 – STRUCTURES AND UNIONS: [04] Basic of Structures, Structures variables, initialization, structure assignment, Structures and arrays: arrays of structures,
TOPIC: 08 – POINTERS: [06] Concept of Pointers, Address operators, pointer type declaration, pointer assignment, pointer initialization pointer arithmetic.
Book Recommended: 1. Programming with C. Second Edition. Tata McGraw-Hill,
2000 - Byron Gottfried
2. How to solve by Computer, Seventh Edition, 2001, Prentice hall of India.
- R.G. Dromey
3. Programming with ANSI-C, First Edition, 1996, Tata McGraw hill.
- E. Balaguruswami
4. Programming with ANSI & Turbo C. First Edition, Pearson Education.
- A. Kamthane
5. Programming with C. First Edition, 1997, Tara McGraw hill.
- Venugopla and Prasad
6. The C Programming Language, Second Edition, 2001, Prentice Hall of India.
- B. W. Kernighan & D.M. Ritchie
7. Programming in C, Vikash Publishing House Pvt. Ltd., Jungpura, New Delhi.
- R. Subburaj
8. Programming with C Language, Tara McGraw Hill, New Delhi.
- C. Balagurswami
9. Elements of C, Khanna Publishers, Delhi. - M. H. Lewin 10. Programming in C. - Stephen G. Kochan 11. Programming in C, khanna Publishers, Delhi. - B. P. Mahapatra 12. Let us C, BPB Publication, New Delhi. - Yashwant kanetkar 13. Programming in C, Galgotia Publications Pvt. Ltd.
Dariyaganj, New Delhi. - Kris A. Jamsa
14. The Art of C Programming, Narosa Publishing House, New Delhi.
- Jones, Robin & Stewart
15. Problem Solving and Programming. Prentice Hall International.
- A.C. Kenneth
16. C made easy, McGraw Hill Book Company, 1987. - H. Schildt 17. Software Engineering, McGraw Hill, 1992. - R.S. Pressman 18. Pointers in C, BPB publication, New Delhi. - Yashwant Kanetkar
7
Hydraulics & Fluid Mechanics Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 15304
04 0 0 Internal Exam. : 20 Rationale: The Civil Engineering studies involve behaviour of fluids both in static & dynamic stages. The behaviour of fluid and its pressure characteristics when flowing in closed conduit or in open channels has to be studied & analysed for its proper handling. Hydraulics & Hand Machines’’ is to be introduced in the curriculum. Objective: The study is to introduce the student with topics of fluid properties, fluid statics & dynamics, its flow characteristics in close conduits & open channels. This will enable the student understand the flow in pipes as encountered in planning & sanitary arrangements and open channel flow as open encountered in irrigation channels. The curriculum has been divided into the following topics, given below: S.No. Topics Periods 01 Fluid Properties (06) 02 Hydrostatics (10) 03 Buoyancy (04) 04 Hydro-Kinematics (09) 05 Measurement of flow (05) 06 Flow over notch and weirs (05) 07 Flow in Pipes (04) 08 Flow through open channel (12) 09 Pumps & Hydraulics Machines (05) Total : (60) CONTENTS: TOPIC: 01 – FLUID PROPERTIES: [06] 01.01 Basic ideas of fluid. 01.02 Physical Properties of fluid. 01.03 Brief study of fluid Properties like density, specitic weight, Surface tension, visocosity. 01.04 Liquid commonly used in hydraulics. 01.05 Normal values of parameters for water. 01.06 Definition of fluid Mechanics and ideal fluids. 01.07 Knowledge of units and dimensions of various Parameters like discharge, Pressure, Pressure head, energy and
Power.
TOPIC: 02 – HYDROSTATICS: [10] 02.01 Total liquid pressure. 02.02 Intensity of liquid pressure and pressure head. 02.03 Atmospheric pressure, pressure gague, Negative pressure and absolute pressure. 02.04 Laws of Liquid pressure. 02.05 Piezometer, simple manometer, Different manometer, inverted manometer. 02.06 Total pressure on plane immersed surface. 02.07 Centre of pressure and its location for horizontal vertical and inclined surfaces. TOPIC: 03 – BUOYANCY: [04] 03.01 Buoyent force and center of buoyancy. 03.02 Kinds of equilibrium of a floating Buoyancy Stable, unstable and neutral Equilibrium. 03.03 Concept of Meta-centre and Meta-centric Height. TOPIC: 04 – HYDRO-KINEMATICS: [09] 04.01 States of Flow-Laminar and Turbulent, 04.02 Types of Flow-Steady and unsteady, uniform and non-uniform sub critical and super critical, compressible and
non compressible.
04.03 Reylonds Number, Frounds Number and Webber Number. 04.04 Equation of continuity for one dimensional steady flow. 04.05 Datum head, velocity head, Pressure head and total head. 04.06 Bernoulli’s Equation and its proof, Modified Bernoulli’s Equation. 04.07 Pitot tube-Principle and its use. 04.08 Venturimeter. 04.08.01 Coefficient of Venturimeter. 04.08.02 Discharge of Venturimeter.
8
04.08.03 Application of Venturimeter.
TOPIC: 05 – MEASUREMENT OF FLOW: [05] 05.01 Orifice. 05.01.01 Orifices and its types-small and orifices, free and drowned orifices. 05.01.02 Flow through
(a) Sharp edged small orifices & loss of head at sharp edged small orifices. (b) Sharp edged Large orifice of Rectangular shape. (c) Drowned orifice (sharp edged or bell mouthed) of any shape. (d) Partially submersed Rectangular orifice.
05.01.03 Velocity or Approach and its effect. 05.01.04 Mouth Piece-External Cylindrical Mouth Piece. TOPIC: 06 – FLOW OVER NOTCHES AND WEIRS: [05] 06.01 Notches & weirs, its shape. 06.02 Narrow crested, Broad Crested and submerged weir. 06.03 Flow through Rectangular, triangular, and trapezoidal notches, cipalleti, Francis Formula and contraction. TOPIC: 07 – FLOW IN PIPES: [04] 07.01 Definition of Hydraulic gradient line & Total energy line. 07.02 Losses in pipe. 07.03 Concept of equivalent pipe . 07.04 Simple idea of water hammer (excluding Numerical problems). TOPIC: 08 – FLOW THROUGH OPEN CHANNEL: [12] 08.01 Steady uniform flow through rectangular and trapezoidal channels 08.02 Chazy’s and Minning’s formula. 08.03 Channel of most efficient cross section-Rectangular and Trapezoidal. 08.04 Specific energy diagram. 08.05 Super critical, sub critical and critical depth of Flow. 08.06 Hydraulic jump. 08.06.01 Hydraulic jump with the help of specific energy diagram. 08.06.02 Formation and use of Hydraulic jump. 08.06.03 Elementary idea of standing wave flume without Mathematical treatment. TOPIC: 09 – PUMPS & HYDRAULIC MACHINE: [04] 09.01 Pumps and its type. (Working principle only, excluding numerical problems). TOPIC: 10 – HYDRAULIC MACHINE: [06] 10.01 Hydraulics transmission of power. Hydraulic Power system. 10.05 Impulse and reaction turbine. 10.06 Power Station-Components. Working principle and their uses only. Books Recommended: Text Books 1. Hydraulics, Fluid Mechanics and Hydraulic Machine (Hindi). M. B. K. - J. Lal 2. Hydraulics, Fluid Mechanics and Hydraulic Machine, Dhanpat Rai & Sons, New Delhi. - Shariff 3. Fundamental Principle of Hydraulics, Charotar Book Stall, Anand. - V. B. Priyani 4. Hydraulics & Hydraulic Machinery, T.M.H. - T.T.T.I. 5. Hydraulics & Fluid Mechanics. - Dr. Jagdish Lal Reference Books 1. Fluid Mechanics, - S. Nagaratnam 2. Hydraulics, Fluid Mechanics and Hydraulic Machine, S. B. H. - Modi and Seth
9
SOIL MECHANICS Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 15305
04 00 00 Internal Exam. : 20 Rationale & Objective: Soil Mechanics is a well recognized subject of Civil Engineering now a days and its study is considered essential for technicians in effective execution and maintenance of a number of Civil Engineering activities like foundation, rigid and flexible pavements, underground dams etc. the mission of technical education is to develop technical man-power which can be utilized for effective and efficient implementation of modern Civil Engineering Projects by theoretical and practical analysis of soil under project area. For fulfillment of this primary objective, the following topics with the contents are included in this curriculum. This curriculum will be able to generate multiple effects in developing knowledge as well as appropriate skill of technicians and it will be helpful in creation of attitude of this towards application of Soil Mechanics in Civil Engineering works for strength and durability of the structures. S.No. Topics Periods 01 Introduction (02) 02 Basic Properties of Soil (05) 03 Determination of Index Properties of Soil (07) 04 Classification of Soil (04) 05 Soil Structure (03) 06 Permeability (06) 07 Compaction (04) 08 Shear Strength of Soil (04) 09 Earth Pressure (06) 10 Bearing Capacity (05) 11 Foundation Engineering (08) 12 Miscellaneous Topics (06) Total : (60) CONTENTS: TOPIC: 01 – INTRODUCTION: [02] 01.01 Basic concept of Soil and its formation. 01.02 Definition of Soil Mechanics & its application in Civil Engineering Works. 01.03 Acquaintance with Indian Soil in general & Soil of Bihar in particular TOPIC: 02 – BASIC PROPERTIES OF SOIL: [05] 02.01 Soil mass as a three phase system. 02.02 Definition and brief explanation of Water content, unit weights, specific gravity, void ratio, Porosity, degree of
saturation, percentage of air voids, air content and Density index.
02.03 Functional Relationship among above parameters. 02.04 Numerical problems based on above topics. TOPIC: 03 – DETERMINATION OF INDEX PROPERTIES OF SOIL: [07] 03.01 Water content determination by (i) even drying methods, (ii) Sand Bath Method and (iii) Pycnometer method. 03.02 Laboratory Method for determination of Specific gravity. 03.03 Particle Size Distribution-Basic Concept. 03.03.01 Methodology of Sieve analysis. 03.03.02 Sedimentation Analysis-Theory and Limitation, Stoke’s law 03.03.03 Consistancy of Soil-Brief idea including Atterberg limits. 03.04 Fundamental concept of Liquid limit, plastic limit & shrinkage limit and their determination in the laboratory. 03.04.01 Simple idea of plasticity, consistency index. 03.04.02 Simple Numerical Problems related to above topics. TOPIC: 04 – CLASSIFICATION OF SOIL: [04] 04.01 Objects of Classification. 04.02 Properties of Soil Classification. 04.03 System of Soil Classification :-
(i) Particle Size Classification (ii) Textural Classification. (iii) Highway Research Board Classification (iv) Indian Soil Classification
06.02 Head, Gradient & Potential. 06.03 Darcy’s law and its limitations. 06.04 Factors affecting permeability. 06.05 Laboratory methods for determination of coefficient of permeabilithy-Constant head & falling head methods. 06.06 Simple Numerical Problems on above topics. TOPIC: 06 – COMPACTION & CONSOLIDATION: [07] 07.01 Theory of Compaction and factors influencing compacted density of soil. 07.02 Brief description of laboratory tests related to compaction of soil-Standard Proctor test & Modified Standard
Proctor Test.
07.03 Effect of Compaction on Soil Properties. 07.04 BASUC CONCEPT OF CONSOLIDATION & Coefficient of consolidation. TOPIC: 07 – SHEAR STRENGTH OF SOIL: [04] 08.01 Brief idea of Shear strength and Stress Analysis by Mohr’s Circle. 08.02 Mohr-Coulomb Failure Theory. 08.03 Measurement of Shear Strength of soil by
(i) Direct Shear Test (ii) Triaxial Compression Test.
TOPIC: 08 – EARTH PRESSURE: [06] 09.01 Basic Concept of active earth pressure, Passive earth pressure and Earth pressure at rest. 09.02 Rankine’s theory-its assumptions and application in the determination of active earth pressure & passive earth pr.
Simple cases.
TOPIC: 09 – BEARING CAPACITY: [05] 10.01 Definition of bearing capacity, Gross pressure intensity, Net pressure intensity, ultimate bearing capacity, Net
ultimate bearing capacity, Net safe bearing capacity and allowable bearing pressure etc.
10.02 Rankine’s Analysis for determination of minimum depth of foundation. 10.03 Terzaghi’s Analysis-Assumptions & Limitations. TOPIC: 10 – FOUNDATION ENGINEERING: [08] 11.01 Pile Foundations-Common types of piles. 11.01.01 Pile Driving-types of hammer 11.01.02 Load carrying capacity of piles by static & dynamic formulae-Basic numerical problems related to it. 11.01.03 Pile Load Test & Cycle Load Test. 11.01.04 Group Action in Pile-Efficiency of Pile group & settlement of pile group in clay. 11.01.05 Under-reamed Pile. 11.02 Concept of well foundation. TOPIC: 11 – MISCELLENEOUS TOPICS: [06] 12.01 Clay Mineralogy- Kaolinite, Montimorillonite & Illite, Minerals of clay. 12.02 Soil Stabilisation- Brief introductions. Books Recommended: 1. Soil Mechanics & Foundation Engineering Standard Book
House, Delhi – 110006 - Dr. B. C. Punamia
2. Soil Engineering in Theory and Practice Volume 1 & 2. C. B. S. Publishers & Distributors, Delhi-110006
- Dr. G. R. Choudhary
3. Engineering Properties of Soil. T. M. H. - S. K. Gulati 4. Soil Mechanics & Foundation Engineering, Khanna
Publishers, Delhi- 110006 - S. K. Gerg
5. Soil Testing, Khanna Publishers, Delhi -110006 - S. Mithal 6. Problems on Soil Mechanics, khanna Publishers, Delhi-
110006 - B. P. Verma
7. Soil Mechanics & Foundation Engineering, Standard Publishers Distributors, Delhi- 110006
ENGINEERING MECHANICS Lab. Practical No of Period in one session : 50
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 00306
04 Internal Exam. : 10 Rationale & Objectives: The Engineering Mechanics Laboratory is a subject which will help technician to understand the application of theory that he has studied in practice by performing experiments and verifying results. Besides the above the objective of the curriculum with effective skill will be developed in them to observe experimental data, and to analyse the results.
These topics of this curriculum will certainly build their confidence in performing the utilization of principle of mechanics in Civil Engineering works. CONTENTS: Eight experiments to be performed in the Laboratory: 1. Determination of elongation of wire under external load. 2. Tensile Test on mild steel specimen. 3. Tensile Test on high tensile specimen. 4. Compression Test on metal. 5. Compression Test on bricks. 6. Determination of Young’s Modulus of Elasticity of wire. 7. Determination of reaction at the support of beam. 8. Determination of bending moment of a simply supported beam. 9. Determination of reaction at the support of roof truss. 10. Determination of deflection of beams. 11. Determination of moment of inertia of fly wheel. 12. Determination of bending moment of a over hanging beam. 13. Verification of Polygon Law of forces. 14. Verification of Triangle Law of forces. 15. To find moment of inertia of fly wheel. 16. Compression Test on metal. 17. Tensile Test on M. S. specimen 18. Determination of co-efficient of friction on inclined plane. Books Recommended: Text Books
1. vfHk;kaf=d ;kaf=dh - tsñ dsñ diwj 2. Strength of Materials - Bininder Singh 3. Mechanics of Structure, Vol. I - S.B. Junarkar. 4. Strength of Materials - R.S. Khurmi. 5. Engineering Mechanics and Strength of Materials - I.B. Prasad. 6. Teaching plans of Strength of Material - T.T.T.I. Madras
12
COMPUTER PROGRAMMING THROUGH ‘C’ Practical No of Period in one session : 60
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 00307
06 00 03 Internal Exam. : 10 CONTENTS: List of Practicals: 1. Programming exercise on executing a C program.
2. Programming exercise on editing C program.
3. Programming exercise on defining variables and assigning values to variable.
4. Programming exercise on arithmetic and relational operations.
5. Programming exercise on arithmetic expressions and their evaluation
6. Programming on infix, postfix, transformation using stack.
7. Programs on array implementation.
Books Recommended: 1. How to solve it by Computer, Prentice Hall of India, 1992. - R.G. Dromey.
2. The C Programming Language, Prentice Hall of India, 1989. -B.W. Kernighan & D.M.
Ritchie.
3. The Spirit of C Programming, Jaico Publishing House, New Delhi, 1987. - Cooper, Mullish
4. Application Programming in C. Macmillain International editions, 1990. - Richa’d Johnson-
Baugh & Martin Kalin
5. The Art of C Programming, Narosa Publishing House, New Delhi. - Jones, Robin & Stewart
6. Problem Solving and Programming. Prentice Hall International. - A.C. Kenneth.
7. C made easy, McGraw Hill Book Company, 1987. - H. Schildt
8. Software Engineering, McGraw Hill, 1992. - R.S. Pressman
9. Programming in C, Vikas Publishing House Pvt. Ltd., Jungpura, New Delhi - R. Subburaj
10. Programming with C language, Tata McGraw Hill, New Delhi. - C. Balaguruswami
11. Elements of C, Khanna Publishers. Delhi - M. H. Lewin
12. Programming in C - Stephan G. Kochan.
13. Programming in C, Khanna Publishers. New Delhi - B.P. Mahapatra
14. Let us C, BPB Publication. New Delhi - Yashwant Kanetkar
15. Programming in C, Galgotia Publications Pvt. Ltd. Dariyaganj, New Delhi. - Kris A. Jamsa
13
HYDRAULICS LAB. SESSIONAL No of Period in one session : 50
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 30
Subject Code 15308
04 00 02 Internal Exam. : 20 Rationale: Experimental verification of the mathematical calculations in operation of some of the hydraulic machines in theory will be useful in service area. Objective: It will help student to conduct and operate the hydraulic equipments and know the results, then he can compare their results with mathematical calculations. He will also be able to find out the experimental errors which normally occurs. CONTENTS Journals based on any eight experiments performed in the Laboratory is to be prepared. 01 Measurement of pressure by piezometre and pressure gauges. 02 Verification of Bernouli’s theorem. 03 Discharge through venturimeter. 04 Determination of Cv, Cc and Cd through sharp edged circular orifice. 05 Determination of Coefficient of discharge through a rectangular notch. 06 Determination of Coefficient of discharge through a triangular notch. 07 Determination of Coefficient of discharge through a rectangular weir or trapezoidal weir. 08 Determination of loss of head due to friction for a given pipe. 09 Determination of metacentric height of a floating body. 10 Determination of critical value of Reynold’s number. 11 Determination of time o emptying a tank. 12 Determination of velocity head by Pitot tube. 13 Study of working principle of centrifugal pump. 14 Study of working principles of Reciprocating pump. 15 Study of working principle of a pelton wheel. 16 Study of working principles of a francis turbine.
14
SOIL MECHANICS LAB.
SESSIONAL No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30
Subject Code 15309
04 Internal Exam. : 20 Rationale & Objective: The Soil Mechanics Laboratory is essential as soil posses a variety of physical properties, most of, which are not constant. This diversity in the nature of the soil need experimental analysis of the soil be performed by the technicians. For this purpose, the present curriculum envisages the skill development of the technicians in performing experiments as well as the presentation and analysis of the experimental data. It will be helpful in building confidence among the technicians in selecting/designing the appropriate components of Civil Engg. works. CONTENTS Preparat ion of Journal based on any Eight experiments of the fol lowing: 01 Determination of water content by Oven Drying Method. 02 Determination of water content by Sand Bath Method. 03 Determination of Specific gravity of soil by Density Bottle. 04 Determination of Specific gravity of soil by Pycnometer. 05 Determination of Field Density by Water Displacement Method. 06 Determination of Field Density by Core Cutter Method. 07 Determination of Field Density by Sand Replacement Method. 08 Determination of Grain Size Distribution by Sieving. 09 Determination of Grain Size Distribution by Hydrometer. 10 Determination of Liquid Limit of Soil. 11 Determination of Plastic Limit of Soil. 12 Determination of Shrinkage Limit of Soil. 13 Determination of Permeability by Constant Head Test. 14 Determination Permeability by Falling Head Test. 15 Determination of Compaction of Soil by Standard Proctor Test. 16 Determination of Compaction of Soil by Modified Proctor Test. Books Recommended: Text Books 1. Soil Mechanics & Foundation Engineering, Standard Book House, Delhi-110006 - Dr. B. C. Punamia 2. Soil Engineering in Theory and Practice Volume-1 & 2, C. B. S. Publishers & Distributors,
Delhi-110006 - Dr. Alam Singh &
Dr. G. R. Choudhary 3. Engineering Properties of Soil, T. M. H. - S. K. Gulati 4. Soil Mechanics & Foundation Engineering, Khanna Publishers, Delhi- 110006 - S. K. Gerg 5. Soil Testing, Khanna Publishers, Delhi-110006 - S. Mithal 6. Problems on Soil Mechanics, Khanna Publishers, Delhi-110006 - B. P. Verma 7. Soil Mechanics & Foundation Engineering, Standard Publishers Distributors, Delhi-110006 - K. R. Arora 8. e`nk ;kaf=dh ,oa uhao baftfu;jh] Standard Publishers Distributors, Delhi-110006 - HkxksjFk yky xqIrk 9. e`nk ;kaf=dh - MkWñ tsñ >k 10. Relevant B. I. S. Codes -
15
DISASTER MANAGEMENT SESSIONAL No of Period in one session :
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 30
Subject Code 15310
- - 02 Internal Exam. : 20
Course Objective: The Course would focus on types of hazards Disasters. The main objective is to study the emerging approaches in Disaster Reduction & Management. The emphasis will be on programmes of National & International organization for Disaster preparedness, Mitigation and awareness. Expected Learning Outcome: The students who shall take this course can prepare hazard zonation maps through education on Disasters and Community Involvement. Teaching will include field trip & interaction with programmes of disaster research & mitigation by national organizations
Journal will be Prepared on each unit Unit-I Types of Environmental hazards & Disasters
a) Natural hazards and Disasters b) Man induced hazards & Disasters
Earthquake Hazards/ disasters
- Causes of Earthquakes - Distribution of earthquakes - Hazardous effects of earthquakes - Earthquakes Hazards in India - Human adjustment, perception & mitigation of earthquake. -
Floods Hazards/ disasters - Causes of floods - Flood hazards India - Flood control measures (Human adjustment, perception & mitigation)
Unit –II Emerging approaches in Disaster Management- Three Satges
1. Pre- disaster stage (preparedness)
a) Preparing hazard zonation maps, Predictability/ forcasting & warning b) Preparing disaster preparedness plan c) Land use zoning d) Preparedness through (IEC) Information, education & Communication Pre-
disaster stage (mitigation)
16
e) Disaster resistant house construction f) Population reduction in vulnerable areas g) Awareness
2. Emergency Stage
a) Rescue training for search & operation at national & regional level b) Immediate relief c) Assessment surveys
3. Post Disaster stage-Rehabilitation
a) Political Administrative Aspect b) Social Aspect c) Economic Aspect d) Environment Aspect
Unit-III Natural Disaster Reduction & Management
a) Provision of Immediate relief measures to disaster affected people b) Prediction of Hazards & Disasters c) Measures of adjustment to natural hazards
References R.B. Singh (Ed) Environmental Geography, Heritage Publishers New Delhi, 1990 Savinder Singh Environmental Geography, Prayag Pustak Bhawan,1997 Kates, B.I & white, G.F The Environment as Hazards, oxford, New York, 1978 R.B. Singh (Ed) Disaster Management, Rawat Publication, New Delhi, 2000 H.K. Gupta (Ed) Disaster Management, Universiters Press, India, 2003 R.B. Singh, space Technology for Disaster Mitigation in India (INCED), University of Tokyo, 1994 Dr. Satender, Disaster Management in Hills, Concept Publishing Co., New Delhi, 2003 A.S. Arya Action Plan for Earthquake,Disaster, Mitigation in V.K. Sharma (Ed) Disaster Management IIPA Publication New Delhi,1994 R.K. Bhandani An overview on Natural & Man made Disaster & their Reduction, CSIR, New Delhi M.C. Gupta Manuals on Natural Disaster Management in India, National Centre for Disaster Management, IIPA, New Delhi, 2001
17
Scheme of Teaching and Examination for III Semester DIPLOMA in COMPUTER SCIENCE & ENGINEERING BRANCH
PROFESSIONAL MATHEMATICS Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00301
06 00 00 Internal Exam. : 20 Rationale: A technical diploma holder is engaged generally as first line supervisor. He forms a bridge between workers and management. He has to understand the language of the modern management and communicate with the workers in their language. This subject will help accomplishment of the task in stipulated time, develop attitude towards cost effectiveness, selection of most effective alternative methods. This course will also help the student to tackle different numerical methods and computational techniques for problem solving in research organization as a programmer. Objective:
The course enables students to. • Managerial skill based on mathematical footing • The ability to find approximate solutions and/or answers to the problems where analytical methods become more complex. • To choose correct numerical techniques for a given problem. S.No. Topics Periods 01 GROUP –A (Numerical Methods) (20) 02 GROUP-B (Statistical Techniques) (20) 03 GROUP-C (Management Techniques) (20) Total: (60) CONTENTS: GROUP-A (NUMERICAL METHODS) (20)
01.01 Introduction to Numerical methods: Approximation and errors (Truncation & Round off).
01.02 Numerical solutions of non-linear and Transcendental equations: Iterative methods. Newton-Raphson’s method. Bisection method and Regula-Falsi method.
01.03 Solution of Linear Simultaneous Equations: Gaussian Elimination method and Gauss-Jordan method.
01.04 Finite Difference: Backward and forward Differences. Finite Difference Interpolation Formula. Newton’s Forward Difference formula and Newton’s Backward Difference formula.
01.05 Numerical Differentiation & Integration: Newton’s forward and backward differentiation formula. Trapezoidal Rule and Simpson’s 1/3 rule for numerical integration.
01.06 Difference equations. simple problem Only GROUP-B (STATISTICAL TECHNIQUES) [20] 02.01 Introduction to statistics: Measure of central tendencies: measures of dispersions:
standard deviation and variance for discrete and grouped data: assumed mean and step deviation methods.
02.02 Theory of Probability: Random events and their types. Probability of Events. Definitions. Laws of Probability (Addition and Multiplication Laws)
02.03 Probability Distribution: Introduction to Arithmetic Mean and Standard Deviation of a probability distribution. Important probability distribution – Binomial distribution. Poisson’s distribution & Their means and variance.
GROUP-C (MANAGEMENT TECHNIQUES) [20] 03.01 Linear Models 03.01.01 Introduction to Operations Research (O.R) Steps of O.R. 03.01.02 Linear Programming Problems: Formulation of a LPP. Mathematical Modelling and
Solution by graphical method.
03.01.03 Solution by Simplex Method: Basic Feasible Solution (Degenerator and Non-degenerator)
03.01.04 Transportation problem: Introduction and Solution Procedure- (i) Finding the initial basic feasible solution by N-W Corner Rule, Least cost method and Vogel’s Approximation Method. (ii) Test of optimality by u-v method only.
03.01.05 Assignment Problem: Introduction and Solution Procedure–Fundamental theory underlying Hungarian Method.
03.02 Network Analysis. CPM & PERT: Introduction. 03.02.01 Basic concepts – Activities. Nodes. Edges. Networking of a project. Various times
calculations. CPM to determine the optimal project schedule.
03.02.02 PERT- Definition, difference between CPM & PERT. Pessimistic times, optimistic times. Most likely times of various activities.
Books Recommended: Text Books 1. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Kanti Swaroop. P.K Gupta and
Man Mohan 2. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Heera & Gupta 3. Operations Research. Macmillan Publishing Co. New York, 1982 - H.A.Taha 4. Computer based numerical algorithm, East West Press, 1975 - E.V Krishna Murthy & S.V. Sen 5. Computer oriented numerical method, Prentice Hall India, 1980 - V. Rajaraman
ENGINEERING MECHANICS Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00302
04 00 00 Internal Exam. : 20 Rationale: The subject forms an important part of Engineering curricula for developing the concepts required in the design of various structures. The subject deals with the basic concept of mechanic of body and the behaviour of material used in practice and in structures under varying load conditions. The first part of the subject deals with the applied mechanics science. Which describe the condition of body in rest or motion under the action of forces. In its preview come variety of general and specialized engineering disciplines concerned with analysis of structures and machines and the mechanism of their parts. In the Second part, the principles of strength of materials is introduced in which the student will learn to distinguish between different types of stress and strain and also the qualitative assessment of stress and strains in material element under the action of internal forces. Objective: Knowledge Workers will be able to:
• Analyze and understand the physical behaviour of members of engineering structures. • Acquire knowledge of various elements of structures. • Utilise the basic principles. • Develop skill to tackle field problem. • Solve the problems by the application of basic principles. • Judge the suitability of materials in design process.
S.No. Topics Periods PART-A
01 Introduction (02) 02 Vector Methods (02) 03 Introduction to system of forces and equilibrium (06) 04 Friction (04) 05 Kinematics and kinetics of a particle (03) 06 Kinematics and kinetics of rigid body (02) 07 Impulse and Momentum (02) 08 Work, Energy and Power (04) Total : (25)
PART-B 01 Simple stress and strains (07) 02 Elastic constants (03) 03 Center of Gravity (Centroid) (02) 04 Moment of Inertia (05) 05 Shearing force and bending moments (08) (25) Total : (50)
CONTENTS: PART-A TOPIC: 01 – INTRODUCTION: [02] Idealisation of mechanics; Concept of rigid body; External forces (Body forces & surface forces) Law of Mechanics. TOPIC: 02 VECTOR METHODS: [02] Equality and equivalence of vectors; Free and Bound vector; Moment of a force about a point and a line; Couple and moment of a couple.
TOPIC: 03 – INDTRODUCTION TO SYSTEM OF FORCES AND EQUILIBRIUM:
[06]
Statically equivalent force system; simplest equivalent of a system of forces; force analysis, free body diagram, equation of equilibrium.
TOPIC: 04 – FRICTION: [04] Basic Concept of different Friction (Static, Dynamic, Sliding, Rolling, Fluid). TOPIC: 05 – KINEMATICS AND KINETICS OF A PARTICLE: [03] Rectilinear and curvilinear translations; normal and tangential component of acceleration. TOPIC:06 – KINEMATICS AND KINETICS OF RIGID BODY: [02] Simple concept of Angular Velocity and angular acceleration. Effective forces on a rigid body. D’ Alembert’s principle.
TOPIC:07 – IMPULSE AND MOMENTUM: [02] Linear impulse and linear momentum, angular impulse and angular momentum, definitions only; TOPIC: 08 – WORK, ENERGY AND POWER: [04] Work done by forces and couples, potential and kinetic energy, work-energy; conservation of energy; concept of power and efficiency.
PART-B
TOPIC: 01 – SIMPLE STREES & STRAIN: [07]
01.01 Definition of various terms and their units (S.I. Units) 01.02 Stress and strain due to axial load and transverse load relation between stress and strain. Hook’s law. Studies of
stress strain curve. Factor of safety & working stress. Concepts of isotropic materials.
01.03 Stress & strain in simple section & composite bar. Stress & strain due to temperature variation. 01.04 Shrinking on hoop’s stresses. TOPIC: 02 – ELASTIC STRESS & STRAIN: [03] 02.01 Linear strain and lateral strain, poisson’s ratio, volumetric strain 02.02 Change in volume due to axial, biaxial & triaxial loading. Bulk modulus. 02.03 Shear stress and strain, modulus of rigidity. 02.04 Simple shear. Complementary shear stress. 02.05 Various Relations among modulus of elasticity, modulus of rigidity & bulk modulus.
TOPIC: 03 – CENTER OF GRAVITY (CENTROID): [02] 03.01 Definition of center of gravity & centroid. 03.02 Determination of C.G of various sections symmetrical and unsymmetrical sections. 03.03 Determination of C.G. of perforated sections. TOPIC: 04 – MOMENT OF INERTIA: [05] 04.01 Definition of M.I.; radius of gyration, second moment of area. 04.02 Parallel axis theorem & perpendicular axis theorem. 04.03 Derivation of M.I. of regular area-rectangular, triangular circular about centroidal axis. 04.04 M.I. of built up section, symmetrical and unsymmetrical about centroidal axis, modulus of sections. TOPIC: 05 – SHEARING FORCE & BENDING MOMENT: [08] 05.01 Types of beams and types of supports, types of loading. 05.02 Concept and definitions of shear force and bending moment, sign convention. 05.03 Shear force and bending moment diagrams for cantilever, simply supported beam, over hanging beam
for various types of loading & couples, point of contraflexure.
05.04 Relation between B.M, S.F. and rate of loading. Books Recommended: Text Books 1. Strength of Materials - R.S. Khurmi 2. Mechanics of Structure - S.B. Junarkar 3. Strength of Materials - Ramamrutham 4. Theory of Structure - Vazirini & Ratwani 5. Strength of Materials & Mechanics of Structure. - Punamia 6. Teaching plans of Strength of Material - T.T.T.I. Madras 7. nzO; lkeF;Z - xq:pj.k flag 8. Engineering Mechanics - I.H. Shames 9.
Engineering Mechanics - Beer & Johnson
10. Strength of material - S.K. Singh
COMPUTER PROGRAMMING THROUGH C Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00303
04 00 00 Internal Exam. : 20 Rationale: Computers play a vital role in present day life, more so, in the professional life of technician engineers. In order to enable the students use the computers effectively in problem solving, this course offers the modern programming language C along with exposition to various engineering applications of computers. Objective: The objectives of this course are to make the students able to: • Develop efficient algorithms for solving a problem. • Use the various constructs of a programming language viz. conditional, iteration and recursion. • Implement the algorithms in “C” language. • Use simple data structures like arrays, stacks and linked list solving problems. • Handling File in “C”. S.No. Topics
Periods
01 Introduction to Programming (03) 02 Algorithm for Problem Solving (08) 03 Introduction to ‘C’ Language (08) 04 Condition and Loops (07) 05 Arrays (07) 06 Functions (07) 07 Structures and Unions (04) 08 Pointers (06) Total : (50) CONTENTS: TOPIC: 01 – INTRODUCTION TO PROGRAMMING: [03] The Basic Model of Computation, Algorithms, Flow-charts, Programming Languages, Compilation, Linking and Loading, Testing and Debugging, Documentation. Programming Style-Names, Documentation & Format, Refinement & Modularity.
TOPIC: 02 – ALGORITHM FOR PROBLEM SOLVING: [08] Exchanging values of two variables, summation of a set of numbers. Reversing digits of an integer, GCD (Greatest Common Division) of two numbers. Test whether a number is prime. Organize numbers in ascending order. Find square root of a number, factorial computation, Fibonacci sequence. Compute sine Series. Check whether a given number is Palindrome or not. Find Square root of a quadratic equation. multiplication of two matrices,
TOPIC: 03 – INTRODUCTION TO ‘C’ LANGUAGE: [08] 03.01 Character set, Variable and Identifiers, Built-in Data Types, Variable Definition, Declaration, C
Key Words-Rules & Guidelines for Naming Variables.
03.02 Arithmetic operators and Expressions, Constants and Literals, Precedence & Order of Evaluation. 03.03 Simple assignment statement. Basic input/output statement. 03.04 Simple ‘C’ programs of the given algorithms TOPIC: 04 – CONDITIONAL STATEMENTS AND LOOPS: [07] 04.01 Decision making within a program 04.02 Conditions, Relational Operators, Logical Perator. 04.03 If statement, it-else statement. 04.04 Loop statements 04.05 Break, Continue, Switch TOPIC: 05 – ARRAYS: [07] What is an Array?, Declaring an Array, Initializing an Array. One dimensional arrays: Array manipulation: Searching, Insertion, Deletion of an element from an array; Finding the largest/smallest element in array; Two dimensional arrays, Addition/Multiplication of two matrices.
TOPIC: 06 – FUNCTIONS: [07] Top-down approach of problem solving. Modular programming and functions, Definition of Functions Recursion, Standard Library of C functions, Prototype of a function: Formal parameter list, Return Type, Function call, Passing arguments to a Function: call by reference; call by value.
TOPIC: 07 – STRUCTURES AND UNIONS: [04] Basic of Structures, Structures variables, initialization, structure assignment, Structures and arrays: arrays of structures,
TOPIC: 08 – POINTERS: [06] Concept of Pointers, Address operators, pointer type declaration, pointer assignment, pointer initialization pointer arithmetic.
Book Recommended: 1. Programming with C. Second Edition. Tata McGraw-Hill,
2000 - Byron Gottfried
2. How to solve by Computer, Seventh Edition, 2001, Prentice hall of India.
- R.G. Dromey
3. Programming with ANSI-C, First Edition, 1996, Tata McGraw hill.
- E. Balaguruswami
4. Programming with ANSI & Turbo C. First Edition, Pearson Education.
- A. Kamthane
5. Programming with C. First Edition, 1997, Tara McGraw hill.
- Venugopla and Prasad
6. The C Programming Language, Second Edition, 2001, Prentice Hall of India.
- B. W. Kernighan & D.M. Ritchie
7. Programming in C, Vikash Publishing House Pvt. Ltd., Jungpura, New Delhi.
- R. Subburaj
8. Programming with C Language, Tara McGraw Hill, New Delhi.
- C. Balagurswami
9. Elements of C, Khanna Publishers, Delhi. - M. H. Lewin 10. Programming in C. - Stephen G. Kochan 11. Programming in C, khanna Publishers, Delhi. - B. P. Mahapatra 12. Let us C, BPB Publication, New Delhi. - Yashwant kanetkar 13. Programming in C, Galgotia Publications Pvt. Ltd.
Dariyaganj, New Delhi. - Kris A. Jamsa
14. The Art of C Programming, Narosa Publishing House, New Delhi.
- Jones, Robin & Stewart
15. Problem Solving and Programming. Prentice Hall International.
- A.C. Kenneth
16. C made easy, McGraw Hill Book Company, 1987. - H. Schildt 17. Software Engineering, McGraw Hill, 1992. - R.S. Pressman 18. Pointers in C, BPB publication, New Delhi. - Yashwant Kanetkar
COMPUTER ORGANISATION & ARCHITECTURE Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 18304
04 00 00 Internal Exam. : 20 Rationale: This course will enable the students to grasp the working of basic components of computer system. Further the course will help them to learn as to how the basic components interact with each other to form a working system. Objective: Objective of the course is to familiarize students about hardware and software design including logic design, and basic structure and behavior of the various functional modules of the computers and how they interact to provide the processing needs of the user. This subject mainly focuses on the hardware and system software. It aims to describe the following aspects: • Building blocks of the computer • Computer Design • Assembly Language Programming S.No. Topics Periods 01 Introduction and Background ( 04 ) 02 Register Transfer Language and Micro-operations ( 05 ) 03 Architecture of a Simple Processor ( 06 ) 04 CPU Organization ( 06 ) 05 Assembly Language Programming ( 07 ) 06 Micro programmed Control Unit ( 07 ) 07 Arithmetic Algorithms ( 04 ) 08 I/O Organization ( 05 ) 09 Memory Organization ( 06 ) Total : ( 50 ) CONTENTS: TOPIC: 01 – INTRODUCTION AND BACKGROUND: [ 04 ] 01.01 Evolution of Computers 01.02 Stored Program concept and Von Neumann Architecture 01.03 Information Representation and Codes 01.04 Building blocks of Computers(Combinational blocks: gates, multiplexers, decoders, encoders
etc., Sequential Building Blocks: Flip flops, registers, counters, random access memory etc. TOPIC: 02 – REGISTER TRANSFER LANGUAGE AND MICRO-OPERATIONS: [ 05 ] 02.01 Concept of bus, Data movement among registers. 02.02 A language to represent conditional data transfer 02.03 Data movement from/to memory 02.04 Arithmetic and logical operations along with register transfer 02.05 Timing in register transfer TOPIC: 03 – ARCHITECTURE OF SIMPLE PROCESSOR: [ 06 ] 03.01 A simple computer organization and Instruction set. 03.02 Instruction execution in terms of microinstructions 03.03 Concept of Interrupt and simple I/O organisation 03.04 Implementation of the processor using building blocks TOPIC: 04 – CPU ORGANISATION: [ 06 ] 04.01 Address modes Instruction formats. 04.02 Instruction formats 04.03 CPU organisation with large registers 04.04 Stacks and handling of interrupts and subroutines 04.05 Instruction pipelining : stages, hazards and methods to remove hazards
TOPIC: 05 – ASSEMBLY LANGUAGE PROGRAMMING: [ 07 ] 05.01 Machine and Assembly language. 05.02 Pseudo-Operations 05.03 Subroutines in assembly language 05.04 Interrupt and I/O Programming 05.05 Examples TOPIC: 06 – MICROPROGRAMMED CONTROL UNIT: [ 07 ] 06.01 Basic organization of micro programmed controller. 06.02 Horizontal and vertical formats 06.03 Address sequencer TOPIC: 07 – ARITHMETIC ALGORITHMS: [ 04 ] 07.01 Addition and Subtraction for sign magnitude and 2’s complement numbers. 07.02 Integer multiplication using shift and add 07.03 Booth’s algorithm 07.04 Integer Division 07.05 Floating point representations and arithmetic algorithms TOPIC: 08 – I/O ORGANISATION: [ 05 ] 08.01 Strobe based and handshake based communication. 08.02 Vector and priority interrupts 08.03 DMA based data transfer TOPIC: 09 – MEMORY ORGANISATION: [ 06 ] 09.01 Basic cell of static & dynamic RAM. 09.02 Building large memories using chips 09.03 Associative memory 09.04 Cache memory organisation 09.05 Virtual memory organisation Books Recommended: Text Books 1 Computer System Architecture, Third Edition, 2000, Pearson Education - M.M. Mano 2 Computer System and Architecture, Prentice Hall of India Pvt. Ltd., New
Delhi - M. Mano
3 Computer Architecture and Organization, McGraw Hill Company, New Delhi - J.P. Hayes 4 Computer Organization and Architecture, Prentice Hall of India Ltd., New
Delhi - W. Stallings
5 Computer System Architecture, Third Edition, 1998, Prentice Hall of India - M. Morris Mano 6 Microprocessor Architecture, Programming and Application, Wiley Eastern
Limited - Gaonkar
Reference Books:
1 Computer Architecture & Organization, Third Edition, 1988, McGraw-Hill. New York
- J.P. Hayes
2 Computer Design and Architecture, Second Edition, 1991, Harper Collins Publishers
- S.G. Siva
3 Computer Organization and Design, Prentice Hill of India Ltd., 1994 - P. Pal Choudhary
OPERATING SYSTEM Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 18305
04 00 00 Internal Exam. : 20 Rationale: The course provides the students with an understanding of human computer interface existing in computer system and the basic concepts of operating system and its working. Further, good working knowledge to work in Windows and Unix environments is provided by this course. Objective: The objectives of this course are to make the students able to • To teach the requirement of Operating System in Computers. • To teach Windows Operating System and to make familiar with special features of Windows Operating System. • To teach multi-user Operating System Unix Operating System and Unix File Structure. S.No. Topics Periods 01 Introduction (02)
02 Process (08)
03 Inter-process Communication and Synchronization (07)
04 Memory Management (07)
05 File Management (07)
06 Security and Protection (04)
07 Multi Processor System (06)
08 Case Studies (09)
Total: (50) CONTENTS: TOPIC: 01 – INTRODUCTION: [ 2 ] Evaluation of Operating Systems, Types of Operating Systems, Different views of the Operating Systems, TOPIC: 02 –PROCESSES: [ 8 ] The Process Concept, Systems Programmer’s view of Processes, The Operating System view of Processes, Operating System Services for Process Management, Scheduling algorithms, Performance Evaluation. TOPIC: 03 – INTERPROCESS COMMUNICATION AND SYNCHRONIZATION: [ 7] The need for inter process synchronization, mutual exclusion, semaphores, Hardware support for mutual exclusion, Classical Problems in concurrent programming, Critical region and conditional critical region, monitors, messages, deadlocks.] TOPIC: 04 – MEMORY MANAGEMENT: [ 7 ] 04.01 Contiguous Allocation Single Process Monitor, Partitioned memory allocation static, Partitioned memory allocation-Dynamic, segmentation 04.02 Noncontiguous Allocation Paging, Virtual Memory(allocation policies and replacement policies) TOPIC: 05 –FILE MANAGEMENT: [ 7 ] A generalization of file services. Directory structure, command Language uses view of the file System TOPIC: 06 –SECURITY AND PROTECTION: [ 4 ] Security threats and goals, penetration, attempts, security policies and mechanisms, authentication, protection and access control, worms and viruses. TOPIC: 07 – MULTI PROCESSOR SYSTEMS: [ 6 ]
Motivation and classification, multi processor interconnection, types of multi processor operating system, multi processor OS functions and requirements, introduction of parallel computing (distributed operating system) Introduction to multiprocessor synchronization. TOPIC: 8 –CASE STUDY: [ 3 ] 8.01 LINUX OPERATING SYSTEM Introduction to Linux Operating System. Linux features & Benefits :- Introduction to Linux:- Systems characteristics and requirements with Linux. Getting Started:-System manger, Password, Log in, Log out, running the system. 8.02 UNIX OPERATING SYSTEM Introduction to Unix Operating System. Unix features & Benefits :- [6] Introduction to Linux:- Systems characteristics and requirements with Linux. Getting Started:-System manger, Password, Log in, Log out, running the system. File in the Unix System:- File structure in Unix, Working with file structures, removable file volumes. Unix Command Shells:- Issuing commands, Input handling by the shells, The shell
programming language, Running the Unix shells, Pipes, Version of Unix Systems. The System Kernel:- Nature of the Kernel, Process Co-ordinations and Management, Input and Output Operations. Books Recommended: 1 Operating Systems-Concept and Design, McGraw-Hill
international Edition-Computer Science Series, 1992 - Milan Milenkovic
2 An introduction to Operating Systems, Addition-Wesley Publishing Company, 1984.
- Harvey M. Deitel
3 Operating System Concepts, Addition-Wesley Publishing Company, 1989.
- James L. Paterson, Abraham Silberschatz
4 Modern Operating Systems, Prentice-Hall of India Private Ltd., 1995.
- Andrew S. Tanenbaum
5 Microsoft Windows Manual - 6 First Course in Computers, Vikash Publishing House Pvt.
ENGINEERING MECHANICS Lab. Practical No of Period in one session : 50
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 00306
04 Internal Exam. : 10 Rationale & Objectives: The Engineering Mechanics Laboratory is a subject which will help technician to understand the
application of theory that he has studied in practice by performing experiments and verifying results.
Besides the above the objective of the curriculum with effective skill will be developed in them to observe
experimental data, and to analyses the results.
These topics of this curriculum will certainly build their confidence in performing the utilization of
principle of mechanics in Civil Engineering works.
CONTENTS: Eight experiments to be performed in the laboratory: 1. Determination of elongation of wire under external load.
2. Tensile Test on mild steel specimen.
3. Tensile Test on high tensile specimen.
4. Compression Test on metal.
5. Compression Test on bricks.
6. Determination of Young’s Modulus of Elasticity of wire.
7. Determination of reaction at the support of beam.
8. Determination of bending moment of a simply supported beam.
9. Determination of reaction at the support of roof truss.
10. Determination of deflection of beams.
11. Determination of moment of inertia of fly wheel.
12. Determination of bending moment of a over hanging beam.
13. Verification of Polygon Law of forces.
14. Verification of Triangle Law of forces.
15. To find moment of inertia of fly wheel.
16. Compression Test on metal.
17. Tensile Test on M.S.specimen.
18. Determination of co-efficient of friction on inclined plane.
Books Recommended: Text Books 1. vfHk;kaf=d ;kaf=dh - tsŒdsŒ diwj 2. Strength of Materials - Bininder Singh 3. Mechanics of Structure, Vol. 1 - S.B. Junarkar 4. Strength of Materials - R.S. Khurmi 5. Engineering Mechanics and Strength of Materials - I.B. Prasad 6. Teaching plans of Strength of Material - T.T.T.I. Madras
COMPUTER PROGRAMMING THROUGH ‘C’ Practical No of Period in one session : 60
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 00307
06 00 03 Internal Exam. : 10 CONTENTS: List of Practicals: 1. Programming exercise on executing a C program.
2. Programming exercise on editing C program.
3. Programming exercise on defining variables and assigning values to variable.
4. Programming exercise on arithmetic and relational operations.
5. Programming exercise on arithmetic expressions and their evaluation
6. Programming on infix, postfix, transformation using stack.
7. Programs on array implementation.
Books Recommended: 1. How to solve it by Computer, Prentice Hall of India, 1992. -R.G. Dromey.
2. The C Programming Language, Prentice Hall of India, 1989. - B.W. Kernighan & D.M.
Ritchie.
3. The Spirit of C Programming, Jaico Publishing House, New Delhi, 1987. - Cooper, Mullish
4. Application Programming in C. Macmillain International editions, 1990. - Richa’d Johnson-
Baugh & Martin Kalin
5. The Art of C Programming, Narosa Publishing House, New Delhi. - Jones, Robin & Stewart
6. Problem Solving and Programming. Prentice Hall International. - A.C. Kenneth.
7. C made easy, McGraw Hill Book Company, 1987. - H. Schildt
8. Software Engineering, McGraw Hill, 1992. - R.S. Pressman
9. Programming in C, Vikas Publishing House Pvt. Ltd., Jungpura, New Delhi - R. Subburaj
10. Programming with C language, Tata McGraw Hill, New Delhi. - C. Balaguruswami
11. Elements of C, Khanna Publishers. Delhi - M. H. Lewin
12. Programming in C - Stephan G. Kochan.
13. Programming in C, Khanna Publishers. New Delhi - B.P. Mahapatra
14. Let us C, BPB Publication. New Delhi - Yashwant Kanetkar
15. Programming in C, Galgotia Publications Pvt. Ltd. Dariyaganj, New Delhi. - Kris A. Jamsa
COMPUTER ORGANISATION & ARCHITECTURE Practical No of Period in one session : 50
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 18308
04 Internal Exam. : 10 List of Practicals:- 01 Write a program in C-language to implement the digital gates. The program should give the truth table of
the gate, which is selected by the user from the menu displayed by the program.
02 Write a program in C-language to implement division algorithm.
03 Write a program in C-language to generate the r's and (r-1)'s complement for a number given in any
number system r.
04 Give the presentation on 74xx series IC for gates.
05 Give the presentation on combinational circuits such as multiplexer, decoder, encoder etc.
06 Give the presentation on sequential circuits such as registers, counters etc.
07 Give the presentation on the flip-flops i.e. RS-flip-flop, D-flip-flop, JK-flip-flop, T-flip-flop, Master-Slave
JK-flip-flop etc.
08 Give the presentation on Von Neumann Architecture of a computer system.
09 Give the presentation on money management i.e. virtual memory, cache memory, paging etc.
10 Write an assembly language program to find the largest integer from maximum of 15 numbers stored at
NUM, defined as consecutive words. The end of the sequence of number is denoted by-9999.
11 Write an assembly language program to covert the binary number into hexadecimal number.
12 Write an assembly language program to convert binary number to decimal number.
13 Write an assembly language program to add two 8-bits numbers in the memory location called NUM1 and
NUM2. The result is stored in the memory location called RESULT. If there was a carry from the addition
it will be stored as 0000001 in location called CARRY.
14 Write an assembly language program to exchange the data between two variables.
15 Write an assembly language program, which count the frequency of each decimal digit 0 to 9 of the
segment of digits available at DIGIT. The sequence is terminated by character #. Put the frequency of 0 to
9 at FREE in ten consecutive words.
16 Write an assembly language program to convert the lower alphabet character after full stop to capital letter
if it is a small letter in the string available at MSG.
17 Write an assembly language program to multiply the two unsigned binary numbers.
18 Write an assembly language program to find the smallest integer from maximum of 15 numbers stored at
NUM, defined as consecutive words. The end of the sequence of number is denoted by -9999.
19 Write an assembly language program to count the number of spaces character and words in the string
available at MSG.
OPERATING SYSTEM Practical No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 60
Subject Code 18309
06 0 03 Internal Exam. : 40 LIST OF SESSIONALS: 1. Demonstrate giving brief history of Operating System, types of Operating Systems in use these days, how it
is necessary for a computer functioning.. 2. Prepare a report on different views of the Operating System, the journey of a command execution, Design
and implementation of Operating System. 3. Prepare a report on memory management of Operating System. 4. Prepare a report on file management of Operating System. 5. Demonstrate the Security and Protection features of an Operating System. 6. Demonstrate the functions of Multi Processor Systems. 7. Demonstrate and produce report on computer network algorithms for distributed processing. 8. Prepare a brief history of Windows Operating System. 9. Demonstrate features, tools and accessories of Windows 98. 10. Prepare a brief report on features and benefits of Unix Operating System. Books Recommended: 1 Operating Systems-Concept and Design, McGraw-Hill international
Edition-Computer Science Series, 1992 - Milan Milenkovic
2 An introduction to Operating Systems, Addition-Wesley Publishing Company, 1984.
- Harvey M. Deitel
3 Operating System Concepts, Addition-Wesley Publishing Company, 1989.
- James L. Paterson, Abraham Silberschatz
4 Modern Operating Systems, Prentice-Hall of India Private Ltd., 1995. - Andrew S. Tanenbaum 5 Microsoft Windows Manual - 6 First Course in Computers, Vikash Publishing House Pvt. Ltd.,
PROFESSIONAL MATHEMATICS Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00301
06 00 00 Internal Exam. : 20 Rationale: A technical diploma holder is engaged generally as first line supervisor. He forms a bridge between workers and management. He has to understand the language of the modern management and communicate with the workers in their language. This subject will help accomplishment of the task in stipulated time, develop attitude towards cost effectiveness, selection of most effective alternative methods. This course will also help the student to tackle different numerical methods and computational techniques for problem solving in research organization as a programmer. Objective:
The course enables students to. • Managerial skill based on mathematical footing • The ability to find approximate solutions and/or answers to the problems where analytical methods become more complex. • To choose correct numerical techniques for a given problem. S.No. Topics Periods 01 GROUP –A (Numerical Methods) (20) 02 GROUP-B (Statistical Techniques) (20) 03 GROUP-C (Management Techniques) (20) Total: (60) CONTENTS: GROUP-A (NUMERICAL METHODS) (20)
01.01 Introduction to Numerical methods: Approximation and errors (Truncation & Round off). 01.02 Numerical solutions of non-linear and Transcendental equations: Iterative methods. Newton-Raphson’s
method. Bisection method and Regula-Falsi method.
01.03 Solution of Linear Simultaneous Equations: Gaussian Elimination method and Gauss-Jordan method. 01.04 Finite Difference: Backward and forward Differences. Finite Difference Interpolation Formula. Newton’s
Forward Difference formula and Newton’s Backward Difference formula.
01.05 Numerical Differentiation & Integration: Newton’s forward and backward differentiation formula. Trapezoidal Rule and Simpson’s 1/3 rule for numerical integration.
01.06 Difference equations. simple problem Only GROUP-B (STATISTICAL TECHNIQUES) [20] 02.01 Introduction to statistics: Measure of central tendencies: measures of dispersions: standard deviation and
variance for discrete and grouped data: assumed mean and step deviation methods.
02.02 Theory of Probability: Random events and their types. Probability of Events. Definitions. Laws of Probability (Addition and Multiplication Laws)
02.03 Probability Distribution: Introduction to Arithmetic Mean and Standard Deviation of a probability distribution. Important probability distribution – Binomial distribution. Poisson’s distribution & Their means and variance.
GROUP-C (MANAGEMENT TECHNIQUES) [20] 03.01 Linear Models 03.01.01 Introduction to Operations Research (O.R) Steps of O.R. 03.01.02 Linear Programming Problems: Formulation of a LPP. Mathematical Modelling and Solution by graphical
method.
03.01.03 Solution by Simplex Method: Basic Feasible Solution (Degenerator and Non-degenerator) 03.01.04 Transportation problem: Introduction and Solution Procedure-
(i) Finding the initial basic feasible solution by N-W Corner Rule, Least cost method and Vogel’s Approximation Method. (ii) Test of optimality by u-v method only.
03.01.05 Assignment Problem: Introduction and Solution Procedure–Fundamental theory underlying Hungarian Method.
03.02 Network Analysis. CPM & PERT: Introduction. 03.02.01 Basic concepts – Activities. Nodes. Edges. Networking of a project. Various times calculations. CPM to
determine the optimal project schedule.
03.02.02 PERT- Definition, difference between CPM & PERT. Pessimistic times, optimistic times. Most likely times of various activities.
Books Recommended: Text Books 1. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Kanti Swaroop. P.K Gupta and Man Mohan 2. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Heera & Gupta 3. Operations Research. Macmillan Publishing Co. New York, 1982 - H.A.Taha 4. Computer based numerical algorithm, East West Press, 1975 - E.V Krishna Murthy & S.V. Sen 5. Computer oriented numerical method, Prentice Hall India, 1980 - V. Rajaraman
ENGINEERING MECHANICS Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00302
04 00 00 Internal Exam. : 20 Rationale: The subject forms an important part of Engineering curricula for developing the concepts required in the design of various structures. The subject deals with the basic concept of mechanic of body and the behaviour of material used in practice and in structures under varying load conditions. The first part of the subject deals with the applied mechanics science. Which describe the condition of body in rest or motion under the action of forces. In its preview come variety of general and specialized engineering disciplines concerned with analysis of structures and machines and the mechanism of their parts. In the Second part, the principles of strength of materials is introduced in which the student will learn to distinguish between different types of stress and strain and also the qualitative assessment of stress and strains in material element under the action of internal forces. Objective: Knowledge Workers will be able to:
• Analyze and understand the physical behaviour of members of engineering structures. • Acquire knowledge of various elements of structures. • Utilise the basic principles. • Develop skill to tackle field problem. • Solve the problems by the application of basic principles. • Judge the suitability of materials in design process.
S.No. Topics Periods PART-A
01 Introduction (02) 02 Vector Methods (02) 03 Introduction to system of forces and equilibrium (06) 04 Friction (04) 05 Kinematics and kinetics of a particle (03) 06 Kinematics and kinetics of rigid body (02) 07 Impulse and Momentum (02) 08 Work, Energy and Power (04) Total : (25)
PART-B 01 Simple stress and strains (07) 02 Elastic constants (03) 03 Center of Gravity (Centroid) (02) 04 Moment of Inertia (05) 05 Shearing force and bending moments (08) (25) Total : (50)
CONTENTS: PART-A TOPIC: 01 – INTRODUCTION: [02] Idealisation of mechanics; Concept of rigid body; External forces (Body forces & surface forces) Law of Mechanics. TOPIC: 02 VECTOR METHODS: [02] Equality and equivalence of vectors; Free and Bound vector; Moment of a force about a point and a line; Couple and moment of a couple.
TOPIC: 03 – INDTRODUCTION TO SYSTEM OF FORCES AND EQUILIBRIUM:
[06]
Statically equivalent force system; simplest equivalent of a system of forces; force analysis, free body diagram, equation of equilibrium.
TOPIC: 04 – FRICTION: [04] Basic Concept of different Friction (Static, Dynamic, Sliding, Rolling, Fluid). TOPIC: 05 – KINEMATICS AND KINETICS OF A PARTICLE: [03] Rectilinear and curvilinear translations; normal and tangential component of acceleration. TOPIC:06 – KINEMATICS AND KINETICS OF RIGID BODY: [02] Simple concept of Angular Velocity and angular acceleration. Effective forces on a rigid body. D’ Alembert’s principle.
TOPIC:07 – IMPULSE AND MOMENTUM: [02] Linear impulse and linear momentum, angular impulse and angular momentum, definitions only; TOPIC: 08 – WORK, ENERGY AND POWER: [04] Work done by forces and couples, potential and kinetic energy, work-energy; conservation of energy; concept of power and efficiency.
PART-B
TOPIC: 01 – SIMPLE STREES & STRAIN: [07]
01.01 Definition of various terms and their units (S.I. Units) 01.02 Stress and strain due to axial load and transverse load relation between stress and strain. Hook’s law. Studies of
stress strain curve. Factor of safety & working stress. Concepts of isotropic materials.
01.03 Stress & strain in simple section & composite bar. Stress & strain due to temperature variation. 01.04 Shrinking on hoop’s stresses. TOPIC: 02 – ELASTIC STRESS & STRAIN: [03] 02.01 Linear strain and lateral strain, poisson’s ratio, volumetric strain 02.02 Change in volume due to axial, biaxial & triaxial loading. Bulk modulus. 02.03 Shear stress and strain, modulus of rigidity. 02.04 Simple shear. Complementary shear stress. 02.05 Various Relations among modulus of elasticity, modulus of rigidity & bulk modulus.
TOPIC: 03 – CENTER OF GRAVITY (CENTROID): [02] 03.01 Definition of center of gravity & centroid. 03.02 Determination of C.G of various sections symmetrical and unsymmetrical sections. 03.03 Determination of C.G. of perforated sections. TOPIC: 04 – MOMENT OF INERTIA: [05] 04.01 Definition of M.I.; radius of gyration, second moment of area. 04.02 Parallel axis theorem & perpendicular axis theorem. 04.03 Derivation of M.I. of regular area-rectangular, triangular circular about centroidal axis. 04.04 M.I. of built up section, symmetrical and unsymmetrical about centroidal axis, modulus of sections. TOPIC: 05 – SHEARING FORCE & BENDING MOMENT: [08] 05.01 Types of beams and types of supports, types of loading. 05.02 Concept and definitions of shear force and bending moment, sign convention. 05.03 Shear force and bending moment diagrams for cantilever, simply supported beam, over hanging beam
for various types of loading & couples, point of contraflexure.
05.04 Relation between B.M, S.F. and rate of loading. Books Recommended: Text Books 1. Strength of Materials - R.S. Khurmi 2. Mechanics of Structure - S.B. Junarkar 3. Strength of Materials - Ramamrutham 4. Theory of Structure - Vazirini & Ratwani 5. Strength of Materials & Mechanics of Structure. - Punamia 6. Teaching plans of Strength of Material - T.T.T.I. Madras 7. nzO; lkeF;Z - xq:pj.k flag 8. Engineering Mechanics - I.H. Shames 9.
Engineering Mechanics - Beer & Johnson
10. Strength of material - S.K. Singh
COMPUTER PROGRAMMING THROUGH C Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 00303
04 00 00 Internal Exam. : 20 Rationale: Computers play a vital role in present day life, more so, in the professional life of technician engineers. In order to enable the students use the computers effectively in problem solving, this course offers the modern programming language C along with exposition to various engineering applications of computers. Objective: The objectives of this course are to make the students able to: • Develop efficient algorithms for solving a problem. • Use the various constructs of a programming language viz. conditional, iteration and recursion. • Implement the algorithms in “C” language. • Use simple data structures like arrays, stacks and linked list solving problems. • Handling File in “C”. S.No. Topics
Periods
01 Introduction to Programming (03) 02 Algorithm for Problem Solving (08) 03 Introduction to ‘C’ Language (08) 04 Condition and Loops (07) 05 Arrays (07) 06 Functions (07) 07 Structures and Unions (04) 08 Pointers (06) Total : (50) CONTENTS: TOPIC: 01 – INTRODUCTION TO PROGRAMMING: [03] The Basic Model of Computation, Algorithms, Flow-charts, Programming Languages, Compilation, Linking and Loading, Testing and Debugging, Documentation. Programming Style-Names, Documentation & Format, Refinement & Modularity.
TOPIC: 02 – ALGORITHM FOR PROBLEM SOLVING: [08] Exchanging values of two variables, summation of a set of numbers. Reversing digits of an integer, GCD (Greatest Common Division) of two numbers. Test whether a number is prime. Organize numbers in ascending order. Find square root of a number, factorial computation, Fibonacci sequence. Compute sine Series. Check whether a given number is Palindrome or not. Find Square root of a quadratic equation. multiplication of two matrices,
TOPIC: 03 – INTRODUCTION TO ‘C’ LANGUAGE: [08] 03.01 Character set, Variable and Identifiers, Built-in Data Types, Variable Definition, Declaration, C
Key Words-Rules & Guidelines for Naming Variables.
03.02 Arithmetic operators and Expressions, Constants and Literals, Precedence & Order of Evaluation. 03.03 Simple assignment statement. Basic input/output statement. 03.04 Simple ‘C’ programs of the given algorithms TOPIC: 04 – CONDITIONAL STATEMENTS AND LOOPS: [07] 04.01 Decision making within a program 04.02 Conditions, Relational Operators, Logical Perator. 04.03 If statement, it-else statement. 04.04 Loop statements 04.05 Break, Continue, Switch TOPIC: 05 – ARRAYS: [07] What is an Array?, Declaring an Array, Initializing an Array. One dimensional arrays: Array manipulation: Searching, Insertion, Deletion of an element from an array; Finding the largest/smallest element in array; Two dimensional arrays, Addition/Multiplication of two matrices.
TOPIC: 06 – FUNCTIONS: [07] Top-down approach of problem solving. Modular programming and functions, Definition of Functions Recursion, Standard Library of C functions, Prototype of a function: Formal parameter list, Return Type, Function call, Passing arguments to a Function: call by reference; call by value.
TOPIC: 07 – STRUCTURES AND UNIONS: [04] Basic of Structures, Structures variables, initialization, structure assignment, Structures and arrays: arrays of structures,
TOPIC: 08 – POINTERS: [06] Concept of Pointers, Address operators, pointer type declaration, pointer assignment, pointer initialization pointer arithmetic.
Book Recommended: 1. Programming with C. Second Edition. Tata McGraw-Hill,
2000 - Byron Gottfried
2. How to solve by Computer, Seventh Edition, 2001, Prentice hall of India.
- R.G. Dromey
3. Programming with ANSI-C, First Edition, 1996, Tata McGraw hill.
- E. Balaguruswami
4. Programming with ANSI & Turbo C. First Edition, Pearson Education.
- A. Kamthane
5. Programming with C. First Edition, 1997, Tara McGraw hill.
- Venugopla and Prasad
6. The C Programming Language, Second Edition, 2001, Prentice Hall of India.
- B. W. Kernighan & D.M. Ritchie
7. Programming in C, Vikash Publishing House Pvt. Ltd., Jungpura, New Delhi.
- R. Subburaj
8. Programming with C Language, Tara McGraw Hill, New Delhi.
- C. Balagurswami
9. Elements of C, Khanna Publishers, Delhi. - M. H. Lewin 10. Programming in C. - Stephen G. Kochan 11. Programming in C, khanna Publishers, Delhi. - B. P. Mahapatra 12. Let us C, BPB Publication, New Delhi. - Yashwant kanetkar 13. Programming in C, Galgotia Publications Pvt. Ltd.
Dariyaganj, New Delhi. - Kris A. Jamsa
14. The Art of C Programming, Narosa Publishing House, New Delhi.
- Jones, Robin & Stewart
15. Problem Solving and Programming. Prentice Hall International.
- A.C. Kenneth
16. C made easy, McGraw Hill Book Company, 1987. - H. Schildt 17. Software Engineering, McGraw Hill, 1992. - R.S. Pressman 18. Pointers in C, BPB publication, New Delhi. - Yashwant Kanetkar
ELECTRICAL COMPONENT & MATERIAL Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 20304
00 00 03 Internal Exam. : 20 Rationale For the course of Diploma in Engineering it is a common feature that the students of all branches are taught the common subjects, and the basic thrust is to improve their knowledge of science, and skills in tackling mathematical problems and some common practical practices which help them later on to become a good supervisor. For the Diploma in Electrical Engineering it is desirable to expose them to such items, also which they are to face in subsequent classes as well as in fields. So for designing a curriculum for the 1st year students, it is kept in mind that they should be given sufficient knowledge which they will be able to comprehend and apply in their concerned subjects in the higher classes as well as in their world of work. The functions of diploma holder technicians are to select materials, identify the materials, distinguish between good and bad ones. The skill is to be developed by selecting such types of theories and practicals which are need based. The teachings should be with the help of models, charts, projected photographs, videos and possibly with physical demonstration. The students should be given opportunity to observe the things themselves in institutions, laboratories, workshop as well as in open market. Since no practical classes are being recommended in Electrical Engineering for 1st year students, eight classes have been allotted for physical exposure to different materials to acquaint the students with practical problems or projects, which they will encounter in higher classes and industries. This skill will also help them in entrepreneurship. Tutorial classes have been introduced to make the students know the actual rates and criteria of selection by persuading them to contact local markets at their own. Through the tutorial the students should be made to develop skill so that they can be able to acquire practical knowledge of different types of products and materials available in the market with quality and non quality making. This will help them develop sufficient knowledge of different types of manufactured items. Thus the students will be able to select the right materials at reasonable price. CURRICULUM SL Topics Periods 1. Introduction to Conductors .. 2. Insulating Materials .. 3. Magnetic Materials .. 4. Semi Conducting Materials .. 5. Physical Exposure .. Total 60 CONTENTS Topics Content Periods 01 Introduction to Conductors .. 01.01 General properties and specification of conducting materials: By showing charts and providing
tables. Use of S.W.G. and its equivalent. 01.02 Resistivity and factors affecting resistivity. Effect of temperature - by showing some practicals
and illustrating it. 01.03 Properties of Copper, Aluminium, Steel materials used in the construction of electric cables,
standard conductors - Each item explained clearly and their individual use in practical purposes. Naming the material or equipment inside and outside and illustrating them with physical presence.
01.04 Low resistivity copper alloys, high resistivity alloys, practical uses in electrical resistance in lamps and electric furnaces - After explaining the properties, the practical use should be shown to students by demonstration, List of equipments should be provided.
01.05 Properties and application of Nichrome, Manganin, Tungsten, Solder, Fuse elements. With practical use and method of selection of materials for a particular work.
02 Insulating Materials .. _ The objective of this topic is to let the students know the importance of insulating materials and
their uses in day-to-day life as well as in transmission of electrical power.
02.01 Introduction, electrical properties of dielectrics, volume resistance, surface resistance. By imparting theoretical resistance with numerical methods of calculations.
02.02 Factors affecting insulating resistance, factors affecting dielectric strength - By imparting theoretical resistance with numerical methods of calculations.
02.03 Main insulating materials, temporating rating of insulating materials - The topic to be discussed in detail with the help of charts and tables. Commonly used insulating materials should be shown.
02.04 Insulating varnishes. Natural and Synthetic rubber, insulating liquid materials - By providing classified knowledge and their practical uses with the help of charts.
02.05 Transformer oil, properties of ideal insulation oil. Causes of deterioration of insulating oil, effect of moisture and temperature, dielectric strength test: This is an important and practically used topic. Efforts should be made to show an oil immersed transformer and its proper use should be discussed in detail.
02.06 Porcelain insulators: This is most commonly used insulating material. While imparting knowledge stress should be on physical representation of various types of insulators and their construction.
03 Magnetic Materials .. _ By imparting knowledge through this topic, the students will be able to understand the importance
of core and yoke in a transformer. 03.01 Introduction and Classification - With the help of proper drawing and photographs students
should be made to understand the importance of the subject and its practical uses in machines. 03.02 Magnetization curve, Hysteresis, B-H Curve, magnetic saturation. 03.03 Hysteresis loop, hysteresis loss, simple problems on hysteresis loss. - The teachings should be
with the help of figures and drawings and its effect on efficiency of a machine should be clearly mentioned.
03.04 Magnetic materials for electric devices and their properties - Properties of ferromagnetic materials should be explained in detail. Its use in transformer to be explained with the help of chart.
04 Semi Conducting Materials .. _ The main aim of this topic is to familiarize the students with basic ideas of semi conductors, use
of different materials in the semi conductors, their importance and uses. It will help them understand the topics of transistor circuit that they will encounter in higher classes. At this juncture the students will be able to know how a semi conductor is used to manufacture a transistor.
04.01 Introduction and uses of semi conducting materials. Basic idea of semi conductors, semi conductors compound, intrinsic and extrinsic semi conductor - The teaching of basic idea should be associated with periodic tables and charts.
04.02 N and P type semi conductor, P-N junction, PNP and NPN type of materials, importance and uses of majority carriers and minority carriers, biasing of a transformer - This topic includes the principle of working of a P-N diode and transistor. The flow diagram of electrons should be explained clearly with the help of a neat chart.
05 Physical Exposure .. _ This will enable the students to develop the skill of distinguishing and differentiating between
good quality and bad quality materials. This will also give an idea of the price of the materials available in various qualities in the market. This will help students select suitable materials at reasonable price in their world of work. Tutorials - Tutorial classes should consist of two parts. Students should be divided into groups of five or six. Each group should be given simple problems relating to inside and outside of the institution. It should relate to the subject. The students should be encouraged for self observation. In the subsequent class they should be put to objective questions. The achievements should be given proper priority in evaluation at terminal examinations. In the tutorial classes the students should be guided to know the actual rates and modes of selection of the materials by persuading them to contact the local market at their own. They should be given practical exposure of different types of products with quality and non quality markings. They should be made able to select the right materials at reasonable prices, with developing a clear-cut knowledge of different types and quality of manufactured items.
Recommended Books SL Title/Publisher Author 1. Electrical Engineering Materials, Mir Publication Y. Koritskey 2. Electrical Engineering Materials, Prentice Hall of India Pvt. Ltd. A.J. Dekkar 3. A Text Book on Electrical Engineering Y.P.S. Bector 4. fo|qr bathfu;fjax inkFkZ ;’k 5. fo|qr vfHk;kaf=d lkexzh Mh- lh- feÙklsu
SEMI CONDUCTOR DEVICES & CIRCUITS Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 20305
06 Internal Exam. : 20 Rationale The continuous use and development of Electronics in each field of engineering has necessitated an electrical engineer to have a thorough knowledge of electronic instruments. Almost all electrical control equipments are now electronically controlled. Thus electronics has become a part and parcel of electrical engineers. Therefore each student of electrical engineering should be well conversant of the use of electronics instruments for measurement circuiting control processes machine operations etc. Objectives With the background of the knowledge of the topics of the subject will enable an electrical supervisor to locate the troubles properly and when arising in the electrical system. They will be able to guide the necessity of control required in industries. Students will be able to select an equivalent components in absence of exact substitute of component for non stop working. CURRICULUM SL Topics Periods 1. Semiconductors .. 2. Digital Electronics .. 3. Power Electronics .. Total 60 CONTENTS Topics Content Periods 01 Semiconductors .. 01.01 Overview of Semiconductor diode and Transistors. 01.02 Formation of transistors and biasing CB, CE and CC configuration. Input-Output characteristics
of transistors, Current and Voltage gains, stability, transistor as an amplifier, 01.03 Field Effect Transistors (FET), JEET, MOSFET, Characteristic of FET, Biasing of FET, 02 Digital Electronics .. 02.01 Logic gates - AND, OR, EXOR, NAND , NOR gates, flip-flop using gates, J-K flip-flop, D-flip
flop, full adder, resistors, shift resistor, 03 Power Electronics .. 03.01 Operational amplifiers - ideal characteristics, use of amplifiers as integrator,
differentiation and as comparator, (a) A/D and D/A convertors - different techniques and their applications. Reference Books SL Title/Publisher Author 1. Solid State Electronics Devices, Tata McGraw Hill - 2. Integrated Electronics, McGraw Hill Miliman 3. Semi Conductor Device, McGraw Hill S. M. Sze 4. Physics of Semi Device, Willy Eastern S. M. Sze 5. Electronics Device and Circuits, Khanna Publishers G.K. Mithal 6. Electronic Principles, Tata McGraw Hill A.P. Malvino 7. Transistor Approximation, Tata McGraw Hill A.P. Malvino 8. Introduction to Solid State Physics, 6th Ed., McGraw Hill Kittel 9. Introduction to Micro Electronic Devices Pulfrey 10. Micro Electronic Devices, McGraw Hill Yang 11. Special Issue on Lasers, Physics Today 41 No.-10, Oct. 88
ENGINEERING MECHANICS Lab. Practical No of Period in one session : 50
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code
00306 04 00 Internal Exam. : 10 Rationale & Objectives: The Engineering Mechanics Laboratory is a subject which will help technician to understand the application of theory that he has studied in practice by performing experiments and verifying results. Besides the above the objective of the curriculum with effective skill will be developed in them to observe experimental data, and to analyses the results. These topics of this curriculum will certainly build their confidence in performing the utilization of principle of mechanics in Civil Engineering works. CONTENTS: Eight experiments to be performed in the laboratory: 1. Determination of elongation of wire under external load. 2. Tensile Test on mild steel specimen. 3. Tensile Test on high tensile specimen. 4. Compression Test on metal. 5. Compression Test on bricks. 6. Determination of Young’s Modulus of Elasticity of wire. 7. Determination of reaction at the support of beam. 8. Determination of bending moment of a simply supported beam. 9. Determination of reaction at the support of roof truss. 10. Determination of deflection of beams. 11. Determination of moment of inertia of fly wheel. 12. Determination of bending moment of a over hanging beam. 13. Verification of Polygon Law of forces. 14. Verification of Triangle Law of forces. 15. To find moment of inertia of fly wheel. 16. Compression Test on metal. 17. Tensile Test on M.S.specimen. 18. Determination of co-efficient of friction on inclined plane. Books Recommended: Text Books 1. vfHk;kaf=d ;kaf=dh - tsŒdsŒ diwj 2. Strength of Materials - Bininder Singh 3. Mechanics of Structure, Vol. 1 - S.B. Junarkar 4. Strength of Materials - R.S. Khurmi 5. Engineering Mechanics and Strength of Materials - I.B. Prasad 6. Teaching plans of Strength of Material - T.T.T.I. Madras
COMPUTER PROGRAMMING THROUGH ‘C’ Practical No of Period in one session : 60
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 00307
06 00 03 Internal Exam. : 10 CONTENTS: List of Practicals: 1. Programming exercise on executing a C program.
2. Programming exercise on editing C program.
3. Programming exercise on defining variables and assigning values to variable.
4. Programming exercise on arithmetic and relational operations.
5. Programming exercise on arithmetic expressions and their evaluation
6. Programming on infix, postfix, transformation using stack.
7. Programs on array implementation.
Books Recommended: 1. How to solve it by Computer, Prentice Hall of India, 1992. - R.G. Dromey.
2. The C Programming Language, Prentice Hall of India, 1989. -B.W. Kernighan & D.M.
Ritchie.
3. The Spirit of C Programming, Jaico Publishing House, New Delhi, 1987. - Cooper, Mullish
4. Application Programming in C. Macmillain International editions, 1990. - Richa’d Johnson-
Baugh & Martin Kalin
5. The Art of C Programming, Narosa Publishing House, New Delhi. - Jones, Robin & Stewart
6. Problem Solving and Programming. Prentice Hall International. - A.C. Kenneth.
7. C made easy, McGraw Hill Book Company, 1987. - H. Schildt
8. Software Engineering, McGraw Hill, 1992. - R.S. Pressman
9. Programming in C, Vikas Publishing House Pvt. Ltd., Jungpura, New Delhi - R. Subburaj
10. Programming with C language, Tata McGraw Hill, New Delhi. - C. Balaguruswami
11. Elements of C, Khanna Publishers. Delhi - M. H. Lewin
12. Programming in C - Stephan G. Kochan.
13. Programming in C, Khanna Publishers. New Delhi - B.P. Mahapatra
14. Let us C, BPB Publication. New Delhi - Yashwant Kanetkar
15. Programming in C, Galgotia Publications Pvt. Ltd. Dariyaganj, New Delhi. - Kris A. Jamsa
ELECTRICAL WORKSHOP PRACTICE Practical No of Period in one session : 120
No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40
Subject Code 20308
00 00 60 Internal Exam. : 10 Rationale As a supervisor, electrical diploma holder has to inspect test and modify the work done by skilled workers or artisans under hire. Sometimes he has to demonstrate the correct method and procedure of doing certain operations. So an electrical diploma holder must have conceptual understanding of the method of procedure and possess manual skills in addition to supervisory capability. Objectives To develop special skills required for repairing small electrical domestic appliances, making joints and carrying out work and detecting faults etc. in electrical equipments and circuits. LIST OF PRACTICALS SL Topics
Miscellaneous Electrical Workshop Processes 1. Acquaintance with the average tools and equipments used for electrical workshop. 2. Soldering wire jointing of different types. 3. Making of extension board containing two 5A and one one 15A plug-points. 4. Soldering electrical elements with the necessary switches micro-switches and extension terminals.
House Wiring Processes 1. Wiring of different lamp control, stair casing circuits, batton wiring, cleat wiring and conduit wiring. 2. Assembly and interchange wiring of fluorescent tube light. 3. Connection of table and ceiling fans with regulators. 4. Earth resistance measurement and earthing processes.
Distribution Boards Processes 1. To make a distribution board containing at least two switches, one fan regulator and one 5A plug
point energy meter with main switch. 2. Fault detection and repair of domestic electric installation. 3. Fault detection and its repair in institution's workshop installations. 4. To make a single phase main distribution board with five outgoing circuits for light and fan load
including main switch and fuses (only internal connections). 5. Wiring and testing of alarm and indicating relays, indicating lights etc. 6. Dismantling, repairing, assembling and testing of domestic appliance like electric iron, room heater,
electric toaster, water heater, electric kettle, electric oven, ceiling fan, Table Fan, regulators, alarm bell.
7. Coil winding for small transformers or alarm bell. 8. Assembling small transformer cores from the given lamination plates. 9. Assembling small battery charger.
Armature Winding 1. Armature winding of car dynamo. 2. Armature winding of table fan. 3. Armature winding of ceiling fan. 4. Armature winding of 3 phase induction motor.
ELECTRICAL WORKSHOP PRACTIC Sessional No of Period in one session :
No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80
Subject Code 20309
00 00 00 Internal Exam. : 20 Rationale As a supervisor, electrical diploma holder has to inspect test and modify the work done by skilled workers or artisans under hire. Sometimes he has to demonstrate the correct method and procedure of doing certain operations. So an electrical diploma holder must have conceptual understanding of the method of procedure and possess manual skills in addition to supervisory capability. Objectives To develop special skills required for repairing small electrical domestic appliances, making joints and carrying out work and detecting faults etc. in electrical equipments and circuits. LIST OF PRACTICALS SL Topics
Miscellaneous Electrical Workshop Processes 1. Acquaintance with the average tools and equipments used for electrical workshop. 2. Soldering wire jointing of different types. 3. Making of extension board containing two 5A and one one 15A plug-points. 4. Soldering electrical elements with the necessary switches micro-switches and extension terminals.
House Wiring Processes 1. Wiring of different lamp control, stair casing circuits, batton wiring, cleat wiring and conduit wiring. 2. Assembly and interchange wiring of fluorescent tube light. 3. Connection of table and ceiling fans with regulators. 4. Earth resistance measurement and earthing processes.
Distribution Boards Processes 1. To make a distribution board containing at least two switches, one fan regulator and one 5A plug
point energy meter with main switch. 2. Fault detection and repair of domestic electric installation. 3. Fault detection and its repair in institution's workshop installations. 4. To make a single phase main distribution board with five outgoing circuits for light and fan load
including main switch and fuses (only internal connections). 5. Wiring and testing of alarm and indicating relays, indicating lights etc. 6. Dismantling, repairing, assembling and testing of domestic appliance like electric iron, room heater,
electric toaster, water heater, electric kettle, electric oven, ceiling fan, Table Fan, regulators, alarm bell.
7. Coil winding for small transformers or alarm bell. 8. Assembling small transformer cores from the given lamination plates. 9. Assembling small battery charger.
Armature Winding 1. Armature winding of car dynamo. 2. Armature winding of table fan. 3. Armature winding of ceiling fan. 4. Armature winding of 3 phase induction motor.
Scheme of Teaching and Examination III Semester DIPLOMA in MECHANICAL ENGINEERING
THEORY
SL. No
SUBJECTS SUBJECT
CODE
TEACHING SCHEME
EXAMINATION SCHEME
Periods per
Week
Periods in one
Session
Hours of
Exam.
Terminal Exam.
(A) Marks
Final Exam.
(B) Marks
Total Marks (A+B)
Pass Marks Final
Exam.
Pass Marks in the
Subject
1 Professional Mathematics
00301 6 60 3 20 80 100 26 36
2 Engineering Machanics
00302 4 50 3 20 80 100 26 36
3 Computer Programming Through 'C '
00303 4 50 3 20 80 100 26 36
4 Energy Conversion-I
25304 6 75 3 20 80 100 26 36
5 Material Science and Technology
25305 6 50 3 20 80 100 26 36
Total :- 26 500
PRACTICAL
SL. No.
SUBJECTS SUBJECT
CODE
TEACHING SCHEME
EXAMINATION SCHEME
Periods per
Week
Periods in one
Session
Hours of
Exam.
Marks Internal Exam.
(A)
Marks External Exam.
(B)
Total Marks (A+B)
Pass Marks Final
Exam.
Pass Marks in
the Subject
6 Engineering Mechanics Lab.
00306 4 50 3 10 40 50 16 21
7 Computer Programming Through 'C '
00307 6 60 3 10 40 50 16 21
Total :- 10 100
SESSIONAL
SL. No.
SUBJECTS SUBJECT
CODE
TEACHING SCHEME
EXAMINATION SCHEME
Periods per
Week
Periods in One
Session
Marks of Internal
Examiner (X)
Marks of External Examiner
(Y)
Total Marks (X+Y)
Pass Marks in the Subject
8 Mechanical Engineering Lab.
25308 6 50 40 60 100 50
9 Energy Conversion-Lab
25309 20 30 50
Total :- 42
150
Total Periods per Week Total Marks 750
PROFESSIONAL MATHEMATICS Subject Code
00301
Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
06 00 00 Internal Exam. : 20
Rationale:
A technical diploma holder is engaged generally as first line supervisor. He forms a bridge between workers and
management. He has to understand the language of the modern management and communicate with the workers in their
language. This subject will help accomplishment of the task in stipulated time, develop attitude towards cost
effectiveness, selection of most effective alternative methods. This course will also help the student to tackle different
numerical methods and computational techniques for problem solving in research organization as a programmer.
Objective:
The course enables students to.
Managerial skill based on mathematical footing
The ability to find approximate solutions and/or answers to the problems where analytical methods become
more complex.
To choose correct numerical techniques for a given problem.
S.No. Topics Periods
01 GROUP –A (Numerical Methods) (20)
02 GROUP-B (Statistical Techniques) (20)
03 GROUP-C (Management Techniques) (20)
Total: (60)
CONTENTS:
GROUP-A (NUMERICAL METHODS) (20)
01.01 Introduction to Numerical methods: Approximation and errors (Truncation & Round off).
01.02 Numerical solutions of non-linear and Transcendental equations: Iterative methods. Newton-
Raphson‟s method. Bisection method and Regula-Falsi method.
01.03 Solution of Linear Simultaneous Equations: Gaussian Elimination method and Gauss-Jordan
Newton‟s Forward Difference formula and Newton‟s Backward Difference formula.
01.05 Numerical Differentiation & Integration: Newton‟s forward and backward differentiation
formula. Trapezoidal Rule and Simpson‟s 1/3 rule for numerical integration.
01.06 Difference equations. simple problem Only
GROUP-B (STATISTICAL TECHNIQUES) [20] 02.01 Introduction to statistics: Measure of central tendencies: measures of dispersions: standard
deviation and variance for discrete and grouped data: assumed mean and step deviation
methods.
02.02 Theory of Probability: Random events and their types. Probability of Events. Definitions. Laws
of Probability (Addition and Multiplication Laws)
02.03 Probability Distribution: Introduction to Arithmetic Mean and Standard Deviation of a
probability distribution. Important probability distribution – Binomial distribution. Poisson‟s
distribution & Their means and variance.
GROUP-C (MANAGEMENT TECHNIQUES) [20]
03.01 Linear Models
03.01.01 Introduction to Operations Research (O.R) Steps of O.R.
03.01.02 Linear Programming Problems: Formulation of a LPP. Mathematical Modelling and Solution
by graphical method.
03.01.03 Solution by Simplex Method: Basic Feasible Solution (Degenerator and Non-degenerator)
03.01.04 Transportation problem: Introduction and Solution Procedure-
(i) Finding the initial basic feasible solution by N-W Corner Rule, Least cost method and
Vogel‟s Approximation Method.
(ii) Test of optimality by u-v method only.
03.01.05 Assignment Problem: Introduction and Solution Procedure–Fundamental theory underlying
Hungarian Method.
03.02 Network Analysis. CPM & PERT: Introduction.
03.02.01 Basic concepts – Activities. Nodes. Edges. Networking of a project. Various times calculations.
CPM to determine the optimal project schedule.
03.02.02 PERT- Definition, difference between CPM & PERT. Pessimistic times, optimistic times. Most
likely times of various activities.
Books Recommended: Text Books
1. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Kanti Swaroop. P.K Gupta and Man
Mohan
2. Operations Research. Sultan Chand & Sons, New Delhi, 1990 - Heera & Gupta
3. Operations Research. Macmillan Publishing Co. New York,
1982
- H.A.Taha
4. Computer based numerical algorithm, East West Press, 1975 - E.V Krishna Murthy & S.V. Sen
5. Computer oriented numerical method, Prentice Hall India, 1980 - V. Rajaraman
ENGINEERING MECHANICS Subject Code
00302
Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
04 00 00 Internal Exam. : 20
Rationale:
The subject forms an important part of Engineering curricula for developing the concepts required in the design
of various structures. The subject deals with the basic concept of mechanic of body and the behaviour of material used in
practice and in structures under varying load conditions. The first part of the subject deals with the applied mechanics
science. Which describe the condition of body in rest or motion under the action of forces. In its preview come variety
of general and specialized engineering disciplines concerned with analysis of structures and machines and the
mechanism of their parts.
In the Second part, the principles of strength of materials is introduced in which the student will learn to
distinguish between different types of stress and strain and also the qualitative assessment of stress and strains in material
element under the action of internal forces.
Objective:
Knowledge Workers will be able to:
Analyze and understand the physical behaviour of members of engineering structures.
Acquire knowledge of various elements of structures.
Utilise the basic principles.
Develop skill to tackle field problem.
Solve the problems by the application of basic principles.
Judge the suitability of materials in design process.
S.No. Topics Periods
PART-A
01 Introduction (02)
02 Vector Methods (02)
03 Introduction to system of forces and equilibrium (06)
04 Friction (04)
05 Kinematics and kinetics of a particle (03)
06 Kinematics and kinetics of rigid body (02)
07 Impulse and Momentum (02)
08 Work, Energy and Power (04)
Total : (25)
PART-B
01 Simple stress and strains (07)
02 Elastic constants (03)
03 Center of Gravity (Centroid) (02)
04 Moment of Inertia (05)
05 Shearing force and bending moments (08)
(25)
Total : (50)
TOPIC: 03 – INDTRODUCTION TO SYSTEM OF FORCES AND EQUILIBRIUM:
[06]
Statically equivalent force system; simplest equivalent of a system of forces; force analysis, free body diagram,
equation of equilibrium.
CONTENTS:
PART-A
TOPIC: 01 – INTRODUCTION: [02]
Idealisation of mechanics; Concept of rigid body; External forces (Body forces & surface forces) Law of Mechanics.
TOPIC: 02 VECTOR METHODS: [02] Equality and equivalence of vectors; Free and Bound vector; Moment of a force about a point and a line; Couple and moment of
a couple.
TOPIC: 04 – FRICTION: [04]
Basic Concept of different Friction (Static, Dynamic, Sliding, Rolling, Fluid).
TOPIC: 05 – KINEMATICS AND KINETICS OF A PARTICLE: [03] Rectilinear and curvilinear translations; normal and tangential component of acceleration.
TOPIC:06 – KINEMATICS AND KINETICS OF RIGID BODY: [02] Simple concept of Angular Velocity and angular acceleration. Effective forces on a rigid body. D‟ Alembert‟s
principle.
TOPIC:07 – IMPULSE AND MOMENTUM: [02] Linear impulse and linear momentum, angular impulse and angular momentum, definitions only;
TOPIC: 08 – WORK, ENERGY AND POWER: [04] Work done by forces and couples, potential and kinetic energy, work-energy; conservation of energy; concept of
power and efficiency.
PART-B
TOPIC: 01 – SIMPLE STREES & STRAIN:
[07]
01.01 Definition of various terms and their units (S.I. Units)
01.02 Stress and strain due to axial load and transverse load relation between stress and strain. Hook‟s law. Studies of
stress strain curve. Factor of safety & working stress. Concepts of isotropic materials.
01.03 Stress & strain in simple section & composite bar. Stress & strain due to temperature variation.
01.04 Shrinking on hoop‟s stresses.
TOPIC: 02 – ELASTIC STRESS & STRAIN: [03]
02.01 Linear strain and lateral strain, poisson‟s ratio, volumetric strain
02.02 Change in volume due to axial, biaxial & triaxial loading. Bulk modulus.
02.03 Shear stress and strain, modulus of rigidity.
02.04 Simple shear. Complementary shear stress.
02.05 Various Relations among modulus of elasticity, modulus of rigidity & bulk modulus.
TOPIC: 03 – CENTER OF GRAVITY (CENTROID): [02]
03.01 Definition of center of gravity & centroid.
03.02 Determination of C.G of various sections symmetrical and unsymmetrical sections.
03.03 Determination of C.G. of perforated sections.
TOPIC: 04 – MOMENT OF INERTIA: [05]
04.01 Definition of M.I.; radius of gyration, second moment of area.
TOPIC: 05 – ARRAYS: [07] What is an Array?, Declaring an Array, Initializing an Array.
One dimensional arrays: Array manipulation: Searching, Insertion, Deletion of an element from an array;
Finding the largest/smallest element in array; Two dimensional arrays, Addition/Multiplication of two
matrices.
TOPIC: 06 – FUNCTIONS: [07] Top-down approach of problem solving. Modular programming and functions, Definition of Functions
Recursion, Standard Library of C functions, Prototype of a function: Formal parameter list, Return Type,
Function call, Passing arguments to a Function: call by reference; call by value.
TOPIC: 07 – STRUCTURES AND UNIONS: [04] Basic of Structures, Structures variables, initialization, structure assignment, Structures and arrays: arrays of
structures,
TOPIC: 08 – POINTERS: [06] Concept of Pointers, Address operators, pointer type declaration, pointer assignment, pointer initialization
pointer arithmetic.
Book Recommended:
1. Programming with C. Second Edition. Tata McGraw-Hill,
2000
- Byron Gottfried
2. How to solve by Computer, Seventh Edition, 2001, Prentice
hall of India.
- R.G. Dromey
3. Programming with ANSI-C, First Edition, 1996, Tata
McGraw hill.
- E. Balaguruswami
4. Programming with ANSI & Turbo C. First Edition, Pearson
Education.
- A. Kamthane
5. Programming with C. First Edition, 1997, Tara McGraw
hill.
- Venugopla and Prasad
6. The C Programming Language, Second Edition, 2001,
Prentice Hall of India.
- B. W. Kernighan & D.M. Ritchie
7. Programming in C, Vikash Publishing House Pvt. Ltd.,
Jungpura, New Delhi.
- R. Subburaj
8. Programming with C Language, Tara McGraw Hill, New
Delhi.
- C. Balagurswami
9. Elements of C, Khanna Publishers, Delhi. - M. H. Lewin
10. Programming in C. - Stephen G. Kochan
11. Programming in C, khanna Publishers, Delhi. - B. P. Mahapatra
12. Let us C, BPB Publication, New Delhi. - Yashwant kanetkar
13. Programming in C, Galgotia Publications Pvt. Ltd.
Dariyaganj, New Delhi.
- Kris A. Jamsa
14. The Art of C Programming, Narosa Publishing House, New
Delhi.
- Jones, Robin & Stewart
15. Problem Solving and Programming. Prentice Hall
International.
- A.C. Kenneth
16. C made easy, McGraw Hill Book Company, 1987. - H. Schildt
17. Software Engineering, McGraw Hill, 1992. - R.S. Pressman
18. Pointers in C, BPB publication, New Delhi. - Yashwant Kanetkar
ENERGY CONVERSION - I Subject Code
25304
Theory No of Period in one session : 75
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
06 00 00 Internal Exam. : 20
Rationale:
A diploma holder technician in Mechanical Engineering has to encounter with the use of, and conversion of
chemical energy into thermal energy, thermal energy into mechanical energy, waste products carrying heavy amount of
unuseful energy into useful energy. Conversion of solar energy into different types of energies utilized in different
plants, like railway, automobile etc.
The E.C.I. has been introduced in Diploma II to give the base for the conversion/utilization of technologies
being used or to be used in different organisations.
Objective:
The objective of the course is to provide the basic concepts of the conversion of unuseful energy into useful
energy so that students should be able to develop the new ideas about the energy and can be able to develop a new
technology/advance technology to give more & more useful energy.
The basic concepts provide the following items:
(i) Knowledge of different types of energy.
(ii) Utilization of waste products/unutilized material into biogas or biomass.
(iii) Concept of wind mill.
(iv) Better utilization of abundant energy of the sun in the form of solar energy.
(v) Conversion of chemical energy into thermal energy.
(vi) Conversion of other types of energies into thermal energy.
(vii) Chemical capacity of traditional fuel.
(viii) Capacity of steam, use of steam table, molliers chart.
(ix) Production of steam.
(Knowledge of steam generators etc.)
S.No. Topics Periods
01 Sources of Energy. (10)
02 Heat Transfer for Solar Energy Utilization (05)
03 Solar Radiation Analysis (06)
04 Storage of Solar Energy (06)
05 Methods of Solar Energy (08)
06 Fuels and Combustion of fuels (04)
07 Thermodynamics (18)
08 Air Cycles (08)
09 Steam & Steam Generators (10)
Total : (75)
CONTENTS:
TOPIC: 01 – SOURCES OF ENERGY: [10]
01.01 Definition of energy, types of sources of energy (conventional & non conventional) (01)
01.02 Caouses for evaluation of non-conventional energy, small description. (01)
01.03 Types of non-conventional energy & their resources. (02)
01.04 Availability of non-conventional energy and its usefulness. (01)
01.05 Description of wind mill, its types and performance. (02)
01.06 Bioconversion and Biomass (photo synthesis, biogas generation Materials for biogas, ocean. (02)
TOPIC: 02 – HEAT TRANSFER FOR SOLAR ENERGY UTILIZATION: [05]
6 Field Survey 15406 18 days Continuous 4 10 40 50 16 21
7 Construction Practice -I 15407 6 60 4 10 40 50 16 21
Total :- 6 100
SESSIONAL
SL. No. SUBJECTS SUBJECT
CODE
TEACHING SCHEME EXAMINATION SCHEME
Periods per
Week
Periods in One
Session
Marks of Internal
Examiner (X)
Marks of External
Examiner (Y)
Total Marks (X+Y)
Pass Marks in
the Subject
8 Field Survey 15408 _ _ 20 30 50 25
9 Civil Engg. Drawing 15409 _ _ 40 60 100 50
Total :- 150
Total Periods per Week 42 Total Marks 750
1
SURVEYING – II
Subject Code
15401
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale: The primary job of civil engineering technician is survey work. It is to be carried out for any civil engineering project before any planning & construction can be taken. Hence a thorough knowledge of the methods of surveying & leveling as well as that of plotting is must for any technician. Technicians must also possess skill in the handling of survey instrument for proficiency in carrying out survey work. Therefore the subject is of paramount importance & must necessarily form the base of Civil Engineering curriculum. Objective:
The student will be made conversant with the various instruments & appliance used in surveying. He will be taught chain survey, plane table survey, compass survey and triangulation survey and would be introduced to the modern survey methods.
S.No. Topics Periods 01 Theodolite Surveying (15) 02 Curves (15) 03 Tacheometry (10) 04 Contouring (14) 05 Modern Surveying (06) (60) CONTENTS: TOPIC: 01 – THEODOLITE SURVEYING: [14]Fundamental axes of a theodolite & their relation. Temporary Adjustments. Face left. Face Right & concept of transiting. Measurement of horizontal & vertical Angles, prolonging a line. Travers survey with a Theodolite, Computation by rectangular coordinates. Balancing a traverse by Gale’’s traverse table, solution of simple problems on omitted measurements. Errors in theodolite survey & precautions for minimization.
TOPIC: 02 – CURVES: [15]Need & benefits of its provision, Elements of Circular curves, Degree & Radius of curve & their relation. Problems on simple curves, compound curves, reverse curves & vertical curves. Definition & requirements of transition curves. Length of transition curve: Layout of circular curve with chain & tape and with theodolite.
TOPIC: 03 – TACHEMETRY: [10]Principle of tacheometry; Instruments used in tacheometry; Methods of techeometry; determination of Stadia constants; Tacheometric surveying with line of collimation (i) horizontal (ii) inclined with level staff held vertical.
TOPIC: 04 – Contouring: [15]Concept & definition of contour line; contour interval & horizontal equivalent; factors governing contour interval, characteristics of contours; Methods of contouring; Interpolation of contours; Use of contours maps; drawing L section & cross-section from contour maps; Tracing contour gradient for alignment of roads etc; finding volume of earth-work & capacity of reservoir from contour map.
TOPIC: 05 – MODERN SURVEYING: [06](a) Aerial Surveying & Ground Photogrammetry; Elementary knowledge of both with the basic principles involved especially of stereoscopic vision. Advantages of aerial surveying over conventional methods.
Book Recommended: Text Books 1. Surveying & leveling, Vol. II - Kanethar & Kulkarni 2. Surveying, Vol. II - Dr. B. C. Punami 3. Surveying, Vol. II - D. Clark 4. Photogrammetry - F. H. Moffitt 5. Air Photography Applied to Surveys - C. A. Mart
2
QUANTITIY SURVEYING & COSTING-I
Subject Code
15402
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale: In order to find out the quantities of materials and its cost from the detailed drawing of any structure and find out different material required & cost involved as per drawing. Objective: Calculation of detailed quantities of materials and working out their costs is the major objective of a junior engineer technician. The students must be able to arrange the materials as per the detailed drawings need. S.No. Topics Periods 01 Procedure of Estimating (05) 02 Calculation of quantities (06) 03 Building Estimates (16) 04 Estimate of Roofs (14) 05 Earth Work (14) 06 Application of Computer Programming (05) Total : (60) CONTENTS: TOPIC: 01 – PROCEDURE OF ESTIMATING: [05] 01.01 Definition 01.02 Requirements of an estimate. 01.03 Methods of estimating 01.04 Units of measurements. 01.05 Units of Payment of different items of work. 01.06 Systems for Preparation of an estimate. TOPIC: 02 – CALCULATION OF QUANTITIES: [06]02.01 General Principles. 02.02 Methods of working of quantities for different items of work. 02.03 Centre Line and Long Short Wall method. TOPIC: 03 – BUILDING ESTIMATES: [16]03.01 Estimate of a single room building with Verandah. 03.02 Estimate of a two/three roomed building. 03.03 Estimate of an building and a Primary health center. 03.04 Estimate of double buildings. TOPIC: 04 – BUILDING ESTIMATES: [14]04.01 Estimate of simple buildings with sloping roofs. 04.02 Hipped/gabled/Lean-to-roof with different roofing materials. 04.03 Estimate of King Post and Queen Post Roof Trueses. 04.04 Estimate of Workshop building of an industry or an institution. TOPIC: 05 – EARTHWORK: [14]05.01 Earthwork Computations. 05.02 Lead and Lift. 05.03 Methods of Calculating earthwork. 05.04 Earthwork of a Road. Canal and embankment party in cuttings and filling, using trapezoidal and prismoidal
formula.
TOPIC: 06 – APPLICATION OF COMPUTER PROGRAMMING: [05]06.01 Application of computer programming on a simple estimate. Book Recommended: Text Books 1. Estimating & Costing - B.N. Dutta 2. Estimating & Costing - G.S. Birdi 3. Estimating & Costing - M. Chakraborti
3
CONSTRUCTION TECHNOLOGY - I
Subject Code
15403
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale: One of the basic responsibilities of a Civil Engineering is to construct a cost effective, strong, durable and hygienic building. Construction of a building requires knowledge of such foundations, walls, lintels, beam, roof slabe, stairs, drainage and plumbering etc. and constructions details of various elements. Hence this subject has been introduced. Objective: The student will be taught the simpler aspects of design practices, detailing & counter claim matters of various elements involved in a building sector such as foundation, beams, roof, terrace, woodwork, painting, so that he can take up the construction of a building independently and with confidence as per given drawings specification. S.No. Topics Periods 01 General (02) 02 Foundation (12) 03 Masonary (14) 04 Floor & Floor Finish (06) 05 Finishing works (06) 06 Lintels & Arches (03) 07 Doors & Windows (05) 08 Stairs (06) 09 Roofs (06) Total : (60) CONTENTS: TOPIC: 01 – GENERAL:
[02]
01.01 Definition & Classification of buildings. 01.02 General principles of site selection for different types of building. 01.03 Various Building Terminologies.
TOPIC: 02 – FOUNDATION: [12] 02.01 Definition, purpose, failure & Remedies. 02.02 Soil Investigation, Bearing Capacity of soil, Testing of Bearing Capacity, Improvement of Bearing Capacity. 02.03.01 Different type of foundations and their details, suitability of different type. 02.03.02 Piles, Type and their details, pile driving. 02.04 Methods of excavation, shoring and dewatering including foundation in water logged area.
TOPIC: 03 – MASONARY: [14] 03.01 Introduction, Definition of different terms used in brick masonary and stone masonary, Mortar. 03.02 Classification of stone masonary Requirement of good stone masonary, Dressing of stones, joints of stone
masonary, lifting appliances.
03.03 Bonds in brick work, Types, Comparion Bonds in ½ brick, 1 brick, 1½ bricks & 2 bricks wall, junctions & pillars of different sizes, Requirements of good brick masonary.
03.04 Composite masonary, combination of stones & brick stone & cement concrete, cement concrete masonary, Glass block masonary.
03.05 Partition walls, types, cavity walls, Position of cavity wall tie.
TOPIC: 04 – FLOOR & FLOOR FINISHES: [06] 04.01 Introduction, requirement of good floors, types & their details of construction, dodo & skirting. 04.02 Upper floors, types & their details.
4
TOPIC: 05 – FINISHING WORKS: [06] 05.01 Plaster, properties of good plaster, preparation of surface, methods of plastering, types Rendering, stucco.
Defects of plaster.
05.02 Painting, preparation of surface, types. 05.03 White washing, Colour washing, distemper, washing with snow-cem Painting. TOPIC: 06 – LINTELS & ARCHES:
[03]
06.01 Lintels-Purpose, bearing & thickness, various materials used for lintels such as brick, stone timber, R. C. C. steel girder etc.
06.02 Arches-Introduction, terms used in arch, types shape & materials used.
TOPIC: 07 – DOORS & WINDOWS: [05] 07.01 Doors-Location, function, door frames, various types of doors & their details. 07.02 Windows-Location, function, types fan-light special types of Windows, metal Window, fittings.
TOPIC: 08 – STAIRS: [06] 08.01 Location, function, various terms used, requirement of good stair, types, material used. 08.02 Planning of stairs.
TOPIC: 09 – ROOFS: [06] 09.01 Necessity, pitched & flat roof, terms used in roofs 09.02 Pitched roofs-type of truss, wooden & steel roof covering materials. 09.03 Flat roof-pros & cons, R.C.C. roof, tiled roof wooden roofs, flag stone roof, different types of terrace such as
Madras, Punjab, M.P. & Maharastra etc.
Books Recommended: 1. Building Construction - Sushil Kumar 2. Hkou fuekZ.k VsDuksykWth - oh- ,y- xqIrk3. Hkou fuekZ.k rduhdh - xq: pj.k flag4. Building Technology - S.C. Rangwala 5. Building Construction - Ahuja Reference Books 1. Handbook of Building Engineering - N. B. D. Delhi 2. Indian Standard Codes (Relevant) -
5
CIVIL ENGINEERING DRAWING & DRAFTING
Subject Code
15404
Theory No of Period in one session : 120 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 12 - - Internal Exam. : 20
Rationale: The language of an Engineer is drawing. He should prepare sketches and drawing to suit all communications. He should be able to understand the drawings and carry out work accordingly. He should be able to communicate with the workmen engaged in the Civil constructions works on the basis of the working drawings. Hence this paper has been intended. Objective: The student should be taught to express & communicate through the language of drawings. He would be taught to draw the drawings for buildings. Culvers, bridges etc. and made able to write the specifications of the items involved wherever necessary. The topics to be covered include details of buildings, doors & windows, lintels, arches, stairs & cases, roof & trusses, foundation, culverts and bridges. S.No. Topics Periods 01 Buildings (30) 02 Doors and windows (15) 03 Lintel and Arches (15) 04 Stair & Stair cases (15) 05 Roof and Roof trusses (15) 06 Foundation (09) 07 Culvert (21) (120) CONTENTS: TOPIC: 01 – BUILDINGS:
[30]
01.01 Plan, Elevation & Section of a single storey building with flat roof. 01.02 Plan, Elevation & Section of a single storey building with inclined roof. 01.03 Plan, Elevation & Section of a double storeyed building with flat roof (ground floor) and inclined roof (1st
floor).
01.04 Plan, Elevation & Section of a Godown showing main walls in brick masonary and inclined roof supported over tubular roof truss (Span 15 metres).
Note: The inclined roof should show the slope of the roof covering details of hip end. Gable and valley rafters, Jack rafters etc. TOPIC: 02 – DOOR AND WINDOWS: Sectional Plan, front Elevation & longitudinal section of the following
[15]
02.01 Ledged and braced door and windows. 02.02 Fully Paneled door and window. 02.03 Glazed door and windows. 02.04 Flush door.
TOPIC: 03 – LINTEL AND ARCHES : [15]03.01 Longitudinal and Cross Section of R. B. Lintel. 03.02 Longitudinal and Cross Section of R. C. C. Lintel. 03.03 Sectional Elevation of Semi Circular, segmental, Elliptical and Equilateral Arches.
TOPIC: 04 – STAIR AND STAIR CASES : [15]04.01 Plan and Cross Section of Dog legged stair. 04.02 Plan and Cross Section of open well stair. 04.03 Plan and Cross Section of Cantilever stair. Note: The landings should be half and quarter space.
6
TOPIC: 05 – ROOF AND ROOF TRUSSES:
[15]
05.01 Sectional Elevation of flat top roof. 05.02 Sectional Elevation of Couple roof. 05.03 Sectional Elevation of Couple close roof. 05.04 Sectional Elevation of King Post truss. 05.05 Sectional Elevation of Queen Post truss. 05.06 Elevation of tubular North Light truss. Note: Fixing of Roof materials i.e. A.C. Sheets, G.C.I. Sheets. Tiles etc. should also be shown in the above drawings. TOPIC: 06 – FOUNDATION:
[09]
06.01 Foundation Plan and Section of Stepped foundation under load bearing structures. TOPIC: 07 – CULVERTS :
[21]
07.01 Sectional Plan, half Elevation and Cross Section of Arch Culvert. 07.02 Sectional Plan, half Elevation and Cross Section of Pipe Culvert. 07.03 Sectional Plan, half Elevation and Cross Section of R.C.C. Slab Culvert. Note: The wings walls to be at right angles to the abutments. Book Recommended: Text Books 1. Civil Engg. Drawing - D.N.Bose 2. A text book of Building Drawing - Sah & Kale 3. Civil Engg. Drawing - B.N.Verma 4. Civil Engg. Drawing Published - T.T.T.I.Bhopal 5. Civil Engg. Drawing - Gurucharan Singh & S.C. Sharma 6. Civil Engg. Drawing - Mallik & Meo. 7. I. S. Code 696 & 962.
7
ENGINEERING ECONOMICS & ACCOUNTS
Subject Code 15405
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale: The engineering profession is called upon to reduce or create infrastructures for production of good services. Besides the engineering and technological aspects involved in the production or creation of facilities, the profession interalia gets involved in the interplay of various elements of economics. Accounting and audit, the cost analysis of input materials.
Labour and services over a period of time require in depth concept of procurement of commodities. Escalation of prices. Their dependencies on economic indices & functions. Demand, cost & cost classifications. Pricing & profit elements. The end price of the product will include the profit part. The project of a welfare state will generally have benefits which have benefits which have to be evaluated in terms of economic returns. And in between the profession has to ensure the cost of planning. Budgeting, financing procuring. Price escalation/depreciation contractual obligations, accounting and audit. Hence the necessity of introducing this paper on Engineering Economics & Accounts. S.No. Topics Periods 01 Engineering Economics. (25) 02 Accounts (25) Total: (50) CONTENTS: TOPIC: 01 – ENGINEERING ECONOMICS:
[25]
01.01 Cost concept and classification: Actual Cost, Opportunity Cost, Fixed Cost, Variable Cost, Average Cost, Marginal Cost, Total Cost, Cost-output relation.
01.02 Certain basic terms in economic study: Wants, Demand, Demand Determinants:Utility, Gross National Product (GNP), Gross Domestic Product (GDP), National Income.
01.03 Pricing: Pricing under perfect competition, Balance of Payment, Concept, Types, Causes and measure to correct it. Break even analysis concept and application, Unemployment: Concept, Causes and measre to solve unemployment.
TOPIC: 02 – ACCOUNTS: 02 Introduction
[25]
02.01 Introduction to commercial & Govt. Systems of book keeping (not details only principles) Administrative structure of works organization. Administrative approval. Technical sanction. Expenditure. (financial) sanction. Appropriation. Orators of conveniement bills Vouchers. Payment, cost book.
02.02 Estimates. Register of Sanctioal Estimates. Register of works. Revised of works. Revised Estimates. Revised sanotion, Muster roll-payment to labours & arrear wages, worked charged establishment, fixed charged register measurement books. Standard Measurement Books.
02.03 Advance. Advance to contractors, several advance, Advance payment. Advances to subordinates permanents advance or imprest, Temporary Advance.
Books Recommended: Text Books Engg. Economics Part I - S. K. Nandi Chatterjee & Co. Ltd. Calcutta.
8
FIELD SURVEY
Subject Code 15406
Practical No of Period in one session : No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 18 days continuous Internal Exam. : 10
Rationale: Survey is the prime work of a technician. No work/no project work can start without survey marks and etc. Main persons responsible in the chain of technician are the Junior Engineers. In other words, we can say that technicians are the back bone of any project work because of the fact that the whole of project depends upon the survey results. Objective: Seeing the duties of Junior Engineer, the field survey practical will help students to carry out the actual survey work to be done in field as regular practice work. This will build self confidence towards survey works in student. CONTENTS 01 Traversing by transit theodolite consisting of at least five sides, preparation of Gale’s Traverse table, plotting of traverse
by independent co-ordinates. Details to be filed in the plane tabling. 02 Contouring of an area by square methods – sides of square may be approximately 150 m. 03 Contouring of an area 200 m x 200 m by spot levelling method. 04 Longitudinal section by tacheometry for approximately kilometer distance. 05 Setting out of a simple curve with given data by.
(a) Offset form Long chord method. (b) Rankine’s method of deflection angle.
Books Recommended: Text Books 1. Surveying & Leveling, Vol. II - T.P. Kumhka 2. Surveying, Vol. II - 3. Surveying, Vol. II - D. Clave
9
CONSTRUCTION PRACTICE - I
Subject Code 15407
Practical No of Period in one session : 60 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 6 - - Internal Exam. : 10
Rationale: An important job function of a Civil Engineering technician is to supervise construction of various Civil Engineering structures. So, the construction practice is very important for Civil Engineers. They have to use the knowledge of construction very widely and frequently in his world of work. Objective: The Construction practice will help a student in building a self confidence towards actual construction work. S.No. Topics Periods 01 Work Study (06) 02 Construction Practice (54) Total: (60) CONTENTS: TOPIC: 01 – WORK STUDY: Many visits should be arranged to the construction site nearby the institution to acquaint students with site condition, use of various equipment and various construction techniques and to study different components of building including sub structure and super structure. Study of reinforcement used in different members, details of concrete section. At construction sites, the following should be demonstrated: (a) Spread foundation, under reamed pile foundation raft foundation. (b) D.P.C. over plinth. (c) Scarfolding for construction of super structures. (d) Form work and shuttering for lintel, slab, beam & column. (e) Bending & binding of reinforcement & fabrication. (f) Details of water supply and sanitary fittings.
(06)
Students shall prepare a journal containing, reports on these visits. TOPIC: 02 – CONSTRUCTION PRACTICE:
[54]
02.01 Making sketches and learning use of various tools and appliances for Civil Engineering works. (06) 02.02 Preparing foundation plan for load bearing and framed structure construction. (06) 02.03 Layout of a building having a plinth area of 50 to 60 m2. (06) 02.04 Preparation of mortar, brick masonary in English and Flemish bond for walls, pillars & junctions. (15) 02.05 Preparation of Cement concrete manually and by machine and its laying. (03) 02.06 Plastering and pointing of well. (09) 02.07 Flooring – Preparation of sub surface, brick that soling, brick on edge soling in Herring bond pattern,
Indian Patent stone flooring. (09)
Books Recommended: Text Books 1. Building Construction - Sushil Kumar 2. Hkou fuekZ.k VsDuksykWth - oh- ,y- xqIrk 3. Hkou fuekZ.k rduhdh - xq: pj.k flag 4. Building Technology - S. C. Rangwala 5. Building Construction - Ahuja 6. Building Construction - J. Jag, Sushil Kumar, K. L Roy
10
FIELD SURVEY
Subject Code
15408
Sessional No of Period in one session : No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 - - - Internal Exam. : 20
Rationale: This field survey work is the primary work of a civil technician without which no project work can be taken up during field survey works, a technician will be able to handle the different survey instruments which he is expected to do in service period. A junior engineer is fully responsible for all types of survey works in field. Hence he must be able to conduct all types of survey works successfully in the field. Objective: A student will be able to perform the survey works in the field with the given set of instruments will also be able to identify the errors of the instruments with which he is working. He will also learn to rectify some of the instrument errors personally and then conduct the survey works correctly. CONTENTS 01 Traversing by transit theodolite consisting of at least five sides, preparation of Gale’s Traverse table, plotting of
traverse by independent co-ordinates. Detail to be filed in the plane tabling. 02 Contouring of an area by square methods – sides of square may be approximately 150 m. 03 Contouring of an area 200 m X 200 m by spot leveling method. 04 Longitudinal section by tacheometry for approximately kilometer distance. 05 Setting out of a simple curve with given data by,
(a) Offset form Long chord method. (b) Ranking’s method of deflection angle.
Books Recommended: Text Books 1. Survey and leveling, Vol. II - T. P. Kanetdar 2. Surveying, Vol. II - A. Punmics
11
12
CIVIL ENGINEERING DRAWING
Subject Code 15409
Sessional No of Period in one session : No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 60 - - - Internal Exam. : 40
Rationale: As we all know that Drawing is the language of a technician. Hence in order to make a technician master of Civil Engineering Drawing, He should be able to prepare detailed drawing of civil engineering structures which he will come across during in service. Objective: The detailed Drawing prepared in class should be neatly drawn on drawing sheets and should be preserved on drawing sheets as life time record. He may refer their drawings; whenever some compulsion arises in understanding similar drawing, S.No. Topics
01 Plan, Elevation and Section of a single storey Residential Building having three main rooms, kitchen, bath, store and verandah with flat roof, showing details of stepped foundation.
02 Plan, Elevation and Section of a double storeyed public building with flat roof. 03 Plan, Elevation and Section of a single storey residential building with inclined roof. (Varandah lean
to roof and other rooms couple roof).
04 Plan, Elevation and Section of a double storeyed building with Ground floor having flat roof and first floor having inclined roof.
05 Plan, Elevation and Section of a Godown Building 50 metre long, 15 metre wide with inclined roof supported over Tubular Tures.
06 Sectional Elevation of the following showing details of Rafters and purlins. (a) King Post Truss (b) Queen Post Truss (c) North light Tubular Roof Truss, Enlarged details of important joints should also be shown.
07 Sectional Plan, longitudinal section and Front Elevation of ledged and Braced. Fully paneled and Glazed doors & windows & Flush door.
08 Plan, half Elevation and half cross section of a single span R.C.C. slab culvert. Masonary Arched Culvert and Pipe Culvert.
Books Recommended: Text Books 1. Civil Engg. Drawing - D. N. Bose 2. A text book of Building Drawing - Sah & Kale 3. Civil Engg. Drawing - B. N. Verma 4. Civil Engg. Drawing Published - T.T.T.I. Bhopal 5. Civil Engg. Drawing - Gurucharan Singh & S. C. Sharma 6. Civil Engg. Drawing - Mallik & Meo. 7. I. S. Code 696 & 962. -
1
Scheme of Teaching and Examination for IV Semester DIPLOMA in COMPUTER SCIENCE & ENGINEERING
THEORY
SL. No SUBJECTS SUBJECT
CODE
TEACHING SCHEME EXAMINATION SCHEME
Periods per
Week
Periods in one
Session
Hours of
Exam.
Terminal Exam.
(A) Marks
Final Exam.
(B) Marks
Total Marks (A+B)
Pass Marks Final
Exam.
Pass Marks in
the Subject
1 Data Structure Using ‘C’ 18401 4 50 3 20 80 100 26 36
Total :- 12 150 Total Periods per Week 42 Total Marks 750
2
DATA STRUCTURE USING C
Subject Code
18401
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale: Data Structure is a subject which deals with data and their structures. In system programming, application programming, the method and techniques of data structures are widely used. This study of data structure helps the students in developing logic & structured programs. Objective: After completion of this course student will be able to:- • Understand and use the process of abstraction using a programming language such as 'C'. • Analyze step by step and develop algorithm to solve real world problems. • Implementing various data structures viz. Stacks, Queues, Linked Lists, Trees and Graphs • Understanding various searching & sorting techniques S.No. Topics Periods 01 Basic concepts of data representation (03) 02 Introduction to Algorithm Design and Data Structure (05) 03 Arrays (06) 04 Stacks and Queues (06) 05 Linked lists (08) 06 Trees (07) 07 Searching, sorting and complexity (08) 08 Graphs (07) Total: (50) CONTENTS: TOPIC: 01 – BASIC CONCEPTS OF DATA REPRESENTATION: [03] Abstracting data types: Fundamental and derived data types, Primitive data structures. TOPIC: 02 – INTRODUCTION TO ALGORITHM DESIGN AND DATA STRUCTURES: [05] Design and analysis of algorithm: Algorithm definition, comparison of algorithms, Analysis of Algorithm; Frequency count, Complexity measures in terms of time and space. TOPIC: 03 – ARRAYS: [06] Representation of arrays: single and multidimensional arrays. Address calculation using column and row major ordering. Various operations on Arrays, Application of arrays: Matrix multiplication. TOPIC: 04 – STACKS AND QUEUES: [06] Representation of stacks and queues using arrays and linked-lists, Circular queues, Priority Queue TOPIC: 05 – LINKED LISTS: [08] Singly linked list; operations on list. Linked stacks and queues, Circular linked lists, doubly linked lists TOPIC: 06 - TREES: [07] Binary tree traversal methods: Preorder, In-order, Post-order traversal. Recursive and non-recursive Algorithms for above mentioned Traversal methods. Representation of trees and its applications: Binary tree representation of a tree. TOPIC: 07 – SEARCHING, SORTING AND COMPLEXITY: [08] Searching: Sequential and binary searches Sorting: selection, bubble, Quick, merge.
3
TOPIC: 08 – GRAPHS: [07] Graphs representation: Adjacency matrix, Adjancy lists, Traversal Schemes: Depth first search, Breadth first search. Spanning tree: Definition, Minimal spanning tree algorithms Shortest Path algorithms (Prime's and Kruskal's) Implementation of Strategies: To implement the methods of data structure, C is found to be appropriate language. The student/teacher has to study/teach data structures and their methods using C. Books Recommended: 1 Data Structure Using C and C++, Second Addition, 2000,
Prentice Hall of India. - Y. Langsam, M. J. Augustein and A. M.
Tanebaum 2 Data Structure Using C and C++, Second Addition, 2000,
Prentice Hall of India. - R. Kruse, C. L. Tonodo and B. Leung
3 Data Structure through "C" Language, First Edition, 2001, BPB Publication
- S. Chottopadhyay, D. Ghoshdastidar & M. Chottopadhyay
4 Data Structures, Algorithms and Object Oriented Programming, First Edition, 2002, Tata McGraw Hill.
- G. L. Heileman
5 Fundamental of Data Structes in C++, 2002, Galgotia Publication 2002
- E. Horowitz, Sahni and D. Mehta
4
DIGITAL ELECTRONICS & MICROPROCESSOR
Subject Code 18402
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale: The subject will help the students to learn facts, concepts, principle and procedure of digital electronics. These techniques can be used for designing sequential and combinational circuits which forms the basis of any electronic device. Also, this subject is designed to give clear idea about working principles of 8085 microprocessor. Objective: The objective of this subject is to enable the students to know basic concepts of digital electronics and familiarity with available chips. After undergoing this course the students will have the awareness of various arithmetic circuits, counter design, registers, A/D and D/A converters, semi-conductor memories, multiplexers and de-multiplexers etc. S.No. Topics Periods 01 Review of Number System (02) 02 Logic Families and Circuits (04) 03 Logic Gates and Flip Flops (07) 04 Registers (04) 05 Counters (04) 06 Arithmetic Circuits (04) 07 A/D and D/A Converters (02) 08 Semiconductor Memories (06) 09 Decoders, display devices and associated circuits (03) 10 Multiplexers and De-multiplexers (04) 11 Microprocessors (10) Total: (50) CONTENTS: TOPIC: 01 – REVIEW OF NUMBER SYSTEM: [02] Decimal, binary, octal and hexadecimal number systems, Conversion from one system to another, binary arithmetic, signed numbers Codes: BCD, Excess-3, Gray. TOPIC: 02 – LOGIC FAMILIES AND CIRCUITS: [04] 2.1 TTL, logic family 2.2 NAND gates 2.3 7400 and 5400 series of IC logic families: RTL, TTL, MOS and CMOS. TOPIC: 03 – LOGIC GATES AND FLIP FLOPS: [07] 3.1 Definitions, symbols and truth table of NOT, OR, AND, NAND, NOR, XOR, XNOR gates, De
Morgan’s theorems; Karnaugh-map. 3.2 Logical diagram, truth table; timing diagram and operation of following latches and flip flops: NOR
latch, RS, T, D, JK, Master/ Slave JK flip flops, encoders, decoders. TOPIC: 04 – REGISTERS: [04] 4.1 Shift Registers 4.2 Serial in Serial out 4.3 Serial in Parallel out 4.4 Parallel in Parallel out 4.5 Parallel in Serial out TOPIC: 05 – COUNTERS: [04] 5.1 Synchronous and Asynchronous counters 5.2 Decade counter and its application TOPIC: 06 – ARITHMETIC CIRCUITS: [04] 6.1 Half adder and full adder circuit, design and implementation 6.2 Half and full subtracted circuit, design and implementation
5
TOPIC: 07 – A/D AND D/CONVERTERS: [02] 7.1 Analog to digital conversion TOPIC: 08 – SEMICONDUCTOR MEMORIES: [06] 8.1 Memory Unit 8.2 Concept of memories using registers 8.3 Read only Memory (ROM) 8.4 Random Access Memory (RAM) 8.5 Static and Dynamic Memory TOPIC: 09 – DECODERS, DISPLAY DEVICES AND ASSOCIATED CIRCUITS: [03] a) LED, LCD, seven segment display, basic operation of various commonly used types TOPIC: 10 – MULTIPLEXERS AND DE-MULTIPLEXERS: [04] Basic functions and Block diagram of MUX and DEMUX. TOPIC: 11 – MICROPROCESSORS: [10] 11.1 Evaluation of microprocessors, microcomputer organization, 8-bit, microprocessor-Intel 8085
architecture buses, flags and register organization, timing signals, instruction sets, addressing modes. Programming in machine and assembly languages
11.2 16-bit microprocessors-Intel 8086 architecture, register organization, and instruction sets and addressing modes.
Books Recommended: Text Books 1. Digital Electronics and Applications, McGraw Hills Publishers. - Malvino Leach 2. Digital Logic and Computer Design, Prentice Hall of India Ltd., New
Delhi. - Morries Marrow
3. Digital Integrated Electronics, Prentice Hall of India Ltd., New Delhi - Herbert Raub and Donals Sachilling 4. Digital Electronics, Prentice Hall of India Ltd., New Delhi - Rajaraman 5. Microelectronics, McGraw Hill, 1987 - J. Millman and A. Grabel 6. Linear Integrated Circuits, Wiley Eastern, 1991 - D. Roychaudhuri and S.B. Jani Reference Books:
1. Digital Principles, Latest Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- Malvino & Leach
2. Modern Digital Electronics, Second Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- R.P. Jain
3. Digital Electronics, First Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- V.K. Puri
4. Electronics Circuits and Systems, 1992, Tata McGraw Hill Publishing Company
- Y.N. Bapat
5. Modern Digital Electronics, 1983, Tata McGraw Hill Publishing Company
- R.P. Jain
6. Digital Computer Fundamentals, T.M.H. - Malvino 7. Digital Computer, Dhanpat Roy & Sons. - B. Ram 8. Introduction to Microprocessors, Dhanpat Roy & Sons. - Dr. B. Ram
6
DATABASE MANAGEMENT SYSTEM
Subject Code
18403
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale: This subject will allow students to develop understanding of the basic concepts of data in general and Relational Database System in particular. The students will learn Database concept, Data Structure, Data Models, various approaches to Database design, strengths of relational model, Normalization. Objective: At the end of the course the student will be able to: • Develop Database System to handle the real world problem. • Understand Database design and normalization techniques. • Use Standard Query Language and its various versions. • Understand Importance S.No. Topics Periods 01 Introduction to Database Systems(DBMS) (05) 02 Database Architecture and Modelling (05) 03 Entity Relationship Model (06) 04 Relational Model (06) 05 Relational Algebra and Relational Calculus (06) 06 Introduction to SQL (06) 07 Database Normalization (08) 08 Backup and Recovery (03) 09 Database Security and Integrity (05) Total: (50) CONTENTS: TOPIC: 01 – INTRODUCTION TO DATABASE MANAGEMENT SYSTEMS (DBMS): [05] Why Database, Characteristics of Data in Database, DBMS, What is database Advantage of DBMS TOPIC: 02 – DATABASE ARCHITECTURE AND MODELLING: [05] Conceptual, physical and logical database models, Role of DBA, Database Design TOPIC: 03 – ENTITY RELATIONSHIP MODEL: [06] Components of ER Model, ER Modeling Symbols, Super Class and Sub Class types TOPIC: 04 – RELATIONAL DBMS: [06] Introduction to Relational DBMS TOPIC: 05 – RELATIONAL ALGEBRA AND RELATIONAL CALCULUS: [06] Relational Algebraic operations, Tuple Relational Calculus TOPIC: 06 – INTRODUCTION TO SQL: [06] History of SQL, Characteristics of SQL Advantages of SQL, and SQL in Action SQL data types and Literals, Types of SQL commands, SQL Operators and their precedence, Queries and Sub queries Aggregate functions, Insert, Update and Delete operations. Joins, Unions TOPIC: 07 – DATABASE NORMALISATION: [08] Keys, Relationships, First Normal Form, Functional dependencies, Second Normal Form, Third Normal Form, TOPIC: 08 – BACK UP AND RECOVERY: [03] Database backups; why plan backups? Hardware protection and redundancy, Transaction logs. Importance of backups, Database recovery
7
TOPIC: 09 – DATABASE SECURITY AND INTEGRITY: [05] Types of Integrity constraints, Restrictions on Integrity constraints, Data security risks, Data security requirements, Database users, Protecting data within the database, Granting and revoking privileges and roles. Concepts of DBMS will be implemented by using the popular relational DBMS package such as ORACLE/ MS-SQL. Books Recommended: Text Books 1. Database Management Systems, First Edition, 2002, Vikas Publishing House - A. Leon & M. Leon 2. Fundamentals of Database Systems, Third Edition, 2000, Addison Wesley - R. Elmasri, S. Navathe Reference Books:
1. Database System Concepts, Third Edition, 1997, McGraw-Hill Internation - H. Korth, A. Silberschatz 2. An Introduction to Database Systems, Galgotia Publication - B. Desai 3. Database Processing: Fundamentals, Design Implementation, Prentice Hall of
India. - D.K. Kroenke
4. Database Management Systems, First Edition, 1996, McGraw Hill - P. Bhattacharya and A.K. Majumdar
5. Database System Concepts, Fourth Edition, 1997, Tata McGraw Hill - Abraham Silberschtz, Henry Korth & S. Sudarshan
8
INTRODUCTION TO SOFTWARE PACKAGES
Subject Code 18404
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale & Objective: This course will enable the students to familiarize with the features and use of application packages such as Word Processing Package (MS-Word), Spreadsheet Package (MS-Excel), Presentation Packages (MS-Power Point), Data Base Management Package (Visual Fox Pro) and Anti-virus Packages. S.No. Topics Periods 01 Word Processing (MS-Word) (16) 02 Spreadsheet (MS-Excel) (16) 03 Presentation Package (MS-Power Point) (13) 04 Anti Virus Packages (05) Total: (50) CONTENTS: TOPIC: 01 – WORD PROCESSING PACKAGE (MS-WORD): [16] 01.01 Features of Word Processing Package MS-Word, Menu Options-File, Edit, View, Insert, Format,
Tools-spelling and grammar, language, mail-merge, options; table. 01.02 Creating, editing and saving a document, Opening a document, password protection for file. 01.03 Setting page margins, tab setting, ruler and indenting. 01.04 Formatting a document- using different fonts; changing font size and colour; changing the
appearance through bold/italic/underline; highlighting text; change case; use of sub script and superscript.
01.05 Alignment of text in a document and justification, use of bullets and numbering. 01.06 Paragraph formatting, inserting page breaks and column breaks. 01.07 Use of headers, footers, footnote and end note. Use of Comments, inserting date, time, and special
symbols, importing graphical images and use of drawing tools 01.08 Creating table, formatting cells, using different border styles, shading in tables, merging of cells, and
partition of cells, inserting and deleting a row/column in a table. 01.09 Print preview, zoom, page setup, print options. 01.10 Use of tools such as spell checker, help, mail-merge, and use of macros. TOPIC: 02 – SPREADSHEET PACKAGE (MS-EXCEL): [16] 02.01 Features of Spreadsheet package such as MS Excel, Menu Options- File; edit; view; insert; format;
tools- spelling, auto correct, protection, options; data. 02.02 Concepts of cell and cell-addressing. 02.03 Creating, operating and saving worksheet. 02.04 Entering text, numeric information and formula 02.05 Formatting numbers and text, protection cells, printing worksheet. 02.06 Using data management functions-mathematical, statistical and financial functions. 02.07 Creating different types of charts, graphs and balance worksheet and displaying 3-D Charts, printing
and resizing charts. 02.08 Importing files and graphics. TOPIC: 03 – PRESENTATION PACKAGE (MS-POWER POINT): [13] 03.01 Features of Presentation Package MS-Power Point, Menu options-File; edit, view; insert; format;
tools-spelling, language, auto clipart, slide show 03.02 Status bar, tool bar, customized tool bar, slide view, outline view, slide sorter view, notes page view,
slide show view 03.03 Creating and saving slides, opening and editing slides, changing layout of a slide, deleting of slide,
changing layouts of a slide, deleting of slide, changing the order of slides, animation. 03.04 Working with objects: selecting, grouping, ungrouping and regrouping of objects, moving, aligning,
cutting, copying, pasting, and duplicating objects. 03.05 Putting text on slides: selecting and editing text, finding and replacing text. 03.06 Creating graphs and importing files. 03.07 Creating tables. 03.08 Use of data sheet view and design view.
9
TOPIC: 04 – ANTI VIRUS PACKAGES: [02] 05.01 Introduction to Virus. 05.02 Virus Protection, Deletion & Removal Utilities 05.03 Anti Virus Packages to prevent, detect & delete Viruses. Books Recommended: MS office 2000 for Everyone, Vikash Publications, New Delhi - Sanjay Saxena MS office 2000, Addison Wesley(Singapore) Pvt. Ltd., New Delhi - Sagman MS office 2000 8-in-1, Prentice Hall of India, New Delhi - Habraken MS office, BPB Publications, New Delhi - Ron Mansfield MS Word 2000 in a Nutshell, Vikash Publishing House, New Delhi. - Sanjay Saxena MS Excel 2000 in a Nutshell, Vikash Publishing House, New Delhi. - Sanjay Saxena A Quick Course in Power Point and A Quick Course for Windows,
Galgotia Publications Pvt. Ltd., Daryaganj New Delhi. - Cox
Building Visual FoxPro 5 Application, First Edition, 1997, IDG Books - B. Sosinsky FoxPro 2.6 code Book, BPB Publication, 1994 - Griver Mastering FoxPro 2.5, BPB Publication, 1994 - Siegel FoxPro 2.6 for Dummies, Pustak Mahal - Dan Gookin Understanding Norton Utilities - Peter Dysen
10
SYSTEM ANALYSIS & MIS
Subject Code
18405
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale: For the design of an Information System, it is important to understand the requirements, carry out system study and analyze information. After undergoing this Course, the student will be able to study, analyze and design a system for the user. Objective: The Course focuses on the following aspects of Information System Development: • Study, Analysis and Design of a System • Documenting and evaluating the System • Data Modeling • Developing Information Management System for an Organization • Implementing and Testing S.No. Topics Periods 01 Introduction (05) 02 System Analyst (04) 03 System Development Cycle (07) 04 System Planning (05) 05 Modular and Structured Design (03) 06 System Design and Modeling (05) 07 Input and Output (06) 08 System Implementation and Maintenance (03) 09 OO Analysis/ Design (04) 10 Introduction to Management Information System (08) Total: (50) CONTENTS: TOPIC: 01 – INTRODUCTION: [05] System Definition and Concepts: General Theory systems, Manual and automated systems, Real-life Business Sub-systems. System Environments and Boundaries TOPIC: 02 – SYSTEMS ANALYST: [04] Role and Need of Systems Analyst, Qualifications and responsibilities TOPIC: 03 – SYSTEM DEVELOPMENT CYCLE: [07] Introduction to Systems Development Life Cycle (SDLC), various phases of SDLC: Study, Design, Development, Implementation, Maintenance. TOPIC: 04 – SYSTEM PLANNING: [05] Data and fact gathering techniques: Interviews, Group Communication – Questionnaires, Presentation & Site Visits. Modern Methods for determining system requirements: Joint Application, Development Program, Prototyping, Business Process Re-engineering. TOPIC: 05 – MODULAR AND STRUCTURED DESIGN: [03] Module specifications, Top-down and bottom-up design Module coupling and cohesion TOPIC: 06 – SYSTEM DESIGN AND MODELLING: [05] Process Modeling, Logical and physical design TOPIC: 07 – INPUT AND OUTPUT: [06] Classification of forms, Input/output forms design, User-interface design, Graphical interfaces. Standards and guidelines for GUI design.
11
TOPIC: 08 – SYSTEM IMPLEMENTATION AND MAINTENANCE: [03] System acceptance criteria, System Evaluation and Performance, Testing and Validation, Preparing User Manual Maintenance Activities and Issues TOPIC: 09 – OO ANALYSIS/ DESIGN: [04] Introduction to UML, OO Development Life Cycle and Modeling, Static and dynamic modeling, TOPIC: 10– INTRODUCTION TO MANAGEMENT INFORMATION SYSTEM (MIS): [08] Meaning and role of MIS, Systems approach to MIS. Types of Information Systems: Transaction Processing System, Management Information System, Decision Support System, Books Recommended: Text Books 1 Modern Systems Analysis and Design, Second Edition,
2000, Joey George and Joseph Valacich Pearson Education. - J. Hoffer
2 Systems Analysis and Design, First Edition, 2002, John Wiley & Sons, Inc.
- A. Dennis and B.H. Wixom
Reference Books:
1 Systems Analysis and Design Methods, First Edition, 2000, Tata McGraw-Hill.
- J. Whitten, L. Bentley and K. Dittman
2 Management Information Systems, Seventh Edition, 2002, Pearson Education.
- K.C. Laudon and J.P. Laudon
12
DATABASE MANAGEMENT SYSTEM LAB
Subject Code
18406
Practical No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 04 - - Internal Exam. : 10
LIST OF PRACTICALS: S.No. Experiment Hands on experience on any RDBMS to implement the role of Database Administrator like creating the users,
alter user, grant and revoke of rights of user. Create a Database of employees and departments with the following details. Table name Fields name Emp empno (primary key), ename, Edetails, ebasic, salary- Details, e-deptno (foreign key) Dept deptno (primary key), dept-name, dept. Details. Create suitable tables to perform the following relational operations
select project product join restriction union intersection difference
Perform the following data manipulation operation on table created in Problem 2 (a) insertion of records (b) deletion of records (c) Updating records For the table created in problem 2 perform the following SQL constructs a. SELECT……FROM….WHERE……GROUP BY ….. HAVING ….. ORDER BY….. Create views, temporary tables and perform nested queries on the table created in problem2. Develop a small application using Visual basic as front end and Oracle SQL as backend using ODBC connectively Creation and modification of databases through ER diagram, nornmalisation Creation, updation, insertion and deletion of tables Teachers can take DBMS Lab topics such as the following:- Personal/Bank/Library/ Hostel Accounting / Insurance /Budget /Preparing Highest Cricket Score/Class Marks Management/Admission Merit List/Income Tax Calculation/Books Publisher database/Preparation of Salary of a Govt. organization employee etc. Books Recommended: 1 Introduction to Database Systems, Addison Wesley(Singapore) Pvt.
3 Relational Database Management Systems, Theory & Practice - Val Occardi 4 Teach Yourself Access 97/2000 for Windows, BPB Publications,
New Delhi - Charles Siegal
5 Database System - Silver Schutz 6 Relational Database Management System by - ATF, H. Wiley 7 Database Structured Techniques for Design, Performance and
Management - S. Atre, Wiley
8 Database Management - C.J. Date, Addison Wesley 9 SQL in 21 days - B.P.B. 10 ORACLE, SQL & PL/SQL – Handbook - Phlinski-Person 11 SQL Bible - Alox Krigel, Boris M. Trukhnov
13
INTRODUCTION TO SOFTWARE PACKAGE LAB
Subject Code 18407
Practical No of Period in one session : 60 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 06 - - Internal Exam. : 10
LIST OF PRACTICALS: 1. Using mail merge of MS-Word prepare send New Year greetings to the all Principal, staffs and students of your
institution. 2. Demonstrate the different tools of the MS-Word. 3. Using MS-Excel prepare monthly salary payment of your institution. For calculating use mathematical, statistical
and financial functions of MS-Excel. 4. Using MS-Excel Prepare Pie and bar chart to show current branch wise and batch wise status of students, pass
outs, fails for last five years. 5. Using MS-PowerPoint Prepare a power point presentation of last year annual activities of your polytechnic. 6. Using MS-PowerPoint Prepare a power point presentation on current scientific research based on direction of your
teacher. 7. Prepare a Project Report on definition, types, and history of viruses and antivirus virus packages to fight with
viruses. Books Recommended: 1 MS office 2000 for Everyone, Vikash Publications, New Delhi - Sanjay Saxena 2 MS office 2000, Addison Wesley(Singapore) Pvt. Ltd., New Delhi - Sagman 3 MS office 2000 8-in-1, Prentice Hall of India, New Delhi - Habraken 4 MS office, BPB Publications, New Delhi - Ron Mansfield 5 MS Word 2000 in a Nutshell, Vikash Publishing House, New Delhi. - Sanjay Saxena 6 MS Excel 2000 in a Nutshell, Vikash Publishing House, New Delhi. - Sanjay Saxena 7 A Quick Course in Power Point and A Quick Course for Windows,
Galgotia Publications Pvt. Ltd., Daryaganj New Delhi. - Cox
8 Building Visual FoxPro 5 Application, First Edition, 1997, IDG Books - B. Sosinsky 9 FoxPro 2.6 code Book, BPB Publication, 1994 - Griver 10 Mastering FoxPro 2.5, BPB Publication, 1994 - Siegel 11 FoxPro 2.6 for Dummies, Pustak Mahal - Dan Gookin 12 Understanding Norton Utilities - Peter Dysen
14
DIGITAL ELECTRONICS & MICROPROCESSOR
Subject Code
18408
Sessional No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 04 - - Internal Exam. : 20
LIST OF SESSIONALS: 1. Study of 4 bit up counter 2. Study of 4 bit synchronous counter 3. Study of decade counter 4. Study of serial in serial out register 5. Study of parallel in serial out register 6. Study of D/A converter 7. Study of A/D converters 8. Study of decoder, encoder, MUX and DEMUX, Design & realization of 4:1 multiplexer & 1:4 Demux. 9. Study of half and full adders 10. Assembly language Programming with Intel 8085, and related Programs – Addition,
Subtraction,Comparision etc. Books Recommended: Text Books 1 Digital Electronics and Applications, McGraw Hills Publishers. - Malvino Leach 2 Digital Logic and Computer Design, Prentice Hall of India Ltd., New Delhi. - Morries Marrow 3 Digital Integrated Electronics, Prentice Hall of India Ltd., New Delhi - Herbert Raub and Donals
Sachilling 4 Digital Electronics, Prentice Hall of India Ltd., New Delhi - Rajaraman 5 Microelectronics, McGraw Hill, 1987 - J. Millman and A. Grabel 6 Linear Integrated Circuits, Wiley Eastern, 1991 - D. Roychaudhuri and S.B. Jani Reference Books:
1 Digital Principles, Latest Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- Maluino & Leach
2 Modern Digital Electronics, Second Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- R.P. Jain
3 Digital Electronics, First Edition, 2000, Tata McGraw Hill Publishing Company Ltd., New Delhi
- V.K. Puri
4 Electronics Circuits and Systems, 1992, Tata McGraw Hill Publishing Company
- Y.N. Bapat
5 Modern Digital Electronics, 1983, Tata McGraw Hill Publishing Company - R.P. Jain
15
DATA STRUCTURE USING C
Subject Code 18409
Sessional No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 04 - - Internal Exam. : 20
Contents:- Problems based on topics taught in Theory classes as per instruction and guidance of the teacher concerned. 01 Write a program to create singly linked list, and perform insertion, deletion and updation of items of the list. 02 Write a program, for creating of priority queues. 03 Write a program to create Stack using linked list and arrays, and perform push and pop operation on it. 04 Write a program to convert infix expression into postfix expression. 05 Write a program for following sorting algorithms:- (a) Selection Sort (b) Merge Sort 06 Write programs for following searching algorithms:- (a) Binary & Linear Search (b) Breadth first Search (c) Depth First Search 07 Write a program to find in order, Preorder and Post order traversal of tree. Books Recommended: Text Books 1 Data Structure Using C and C++, Second Edition, 2000,
Prentice Hall of India. - Y. Langsam, M. J. Augesntein and A. M.
Tanenbaum 2 Data Structures and Program Design in C, Second
Edition, 1997, Pearson Education. - R. Kruse, C. L. Tonodo and B. Leung
3 Data Structure through C, First Edition, 2001, BPB Publication
- S. Chottopadhyay, D. Ghoshdastidar & M. Chottopadhyay
Reference Books:
1 Data Structures, Algorithms and Object Oriented Programming, First Edition, 2002, Tata McGraw Hill
- G. L. Heileman
2 Fundamentals of Data Structure in C++, 2002, Galgotia Publication
- Y. Langsam, M. J. Augesntein and A. M. Tanenbaum
16
SYSTEM ANALYSIS AND MIS
Subject Code 18410
Sessional No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 04 - - Internal Exam. : 20
LIST OF SESSIONALS: S.No. Topics Periods 01 Construct an ER diagram for a bank database that shows the basic relationship among customers,
checking account, saving account, loans and bank branches where various accounts and loans are taken out. You also want to keep track of transactions on accounts and loans and maintain the current balance in each account and balance on loan. Remember that each entity in ER diagram represent a simple file of data of which you want to keep track. Construct DFD showing the functional view of the system.
02 Construct an ER diagram for a car insurance database that includes data about customers (car
owners), cars, and accidents, drivers involved in accident, and injured driver and/or passenger. Note that any customer can insure many cars, each car may have different drivers at different times, and accidents typically involve one or more cars. Convert this into DFD.
03 A clinic is in the business of providing dental services to the patient. A number of doctors are on
rolls of the clinic. Patients can take the appointments on the phone or personally for a particular doctor and particular services. Clinic sends reminders to patient and appointment schedule to the doctor one day in advance. At due date and time the patient performs the visit for the appointment to get the services performed on him. At the time of performing services doctor asks the clinic for patient’s last record (if any) and what ever services he has performed and informs the clinic so that the records can be updated.
04 Draw DFD for order processing system. 05 An international airlines initiated a policy for a traveler. The information is as follows:- Passengers who fly more than 10,000 miles per calendar year and pay cash and have been flying for
last 5 years, the get concession of free round trip ticket Otherwise traveler is not entitled for round trip ticket.
(a) Draw suitable decision trees for the above. (b) Draw decision table for the above. 06 Consider a marketing based system. Analyze strategic, managerial and operational trends. Assign
various tasks to entities like product, customer, city and departments. Draw also DFD for the above. 07 Take hospital management system. Explain PCR (Parent Child Relationship) in
Hierarchical/relational DBMS. Create a data dictionary for the same. 08 What are the different threats to system security (in view of information system) like virus, data
1 System Analysis and Design, Galgotia Publications Pvt. Ltd., New Delhi - E. M. Awad 2 System Analysis - Fitzgerald 3 Project Management, Tata Mcgraw Hill, New Delhi. - Chaudhary 4 Introduction to Sytem Analysis and Design, Prentice Hall of India Pvt. Ltd., New Delhi. - Hawryszkiewycz 5 Projects-Presentation, Appraisal, Budgeting and Implementation, Tata Mcgraw Hill, New Delhi. - Prasanna Chandra 6 System Analysis and Design Vol.1 and 2, Galgotia Publications Pvt. Ltd., Dariyaganj, New Delhi. - Lee 7 Analysis and Design of Information System, Second Edition, McGraw Hill, 1989. - Senn 8 The Analysis Design and Implementation of Information System, Fourth Edition, McGraw Hill,
1992. - Henry C. Lucas
9 System Analysis and Design, Second Edition, Galgotia Publications Pvt. Ltd., Dariyaganj, 1996. - Elias M. Avad
Scheme of Teaching and Examination for IV Semester DIPLOMA in ELECTRICAL ENGINEERING
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale Electrical Diploma holders are required to work as technician and function as supervisors in various electric generating plants. They are also required to look after the transmission and distribution systems of electric energy. As such, they must have the knowledge of the technical aspects of the different types of generating plant and the transmission and distribution of electric energy. Objectives Generating plants and the transmission and distribution systems have been included in this paper. The study of proposed topics would enhance the quality and skill of the students. This will set them to face problems properly when placed with responsibility under real situations at respective State Electricity Boards, DVC, Electric Power Units of various large scale and small scale plants. CURRICULUM SL Topics Periods PART - I: GENERATION 1. Thermal Power Station 2. Hydro-Electric Station 3. Nuclear Power Station 4. Comparison of Various Plants PART - II: TRANSMISSION & DISTRIBUTION 1. Constants of Overhead Lines 2. Performance of Transmission Lines 3. Overhead Line Insulator and Corona 4. Distribution Systems 5. Extra High Voltage Transmission Total 60 PART I - GENERATION Topics Content 01 Thermal Power Stations 10 01.01 Uses of thermal power plant, trends, selection of site. 01.02 Main parts and their working. 02 Hydro-Electric Station 10 02.01 Introduction, selection of site, uses. 02.02 Classification of hydro-electric plants (Basic idea only) 02.03 General arrangement of operation and principle of working of a hydro-electric plant. 02.04 Layout of hydro-electric plant. 03 Nuclear Power Station 08 03.01 Introduction, advantages, site selection. 03.02 Elements of a nuclear power station 03.03 Main parts of a reactor and their functions (Basic idea only) 04 Introduction of Non-conventional energy sources. 02 PART II - TRANSMISSION & DISTRIBUTION Topics Content 01 Constants of Overhead Lines 08 01.01 Introduction, single line diagram of transmission and distribution system. 01.02 Inductance of single phase two-wire line, inductance of three phase lines, simple problems. 01.03 Capacitance of three phase lines, simple problems
2
02 Performance of Transmission Lines 08 02.01 Short lines, regulation and general network constants, simple problems. 02.02 Medium lines, Nominal Method, General network constants for localized capacitance, problems. 02.03 Feranti Effect. 03 Overhead Line Insulator and Corona 05 03.01 Type of insulators and their description. (Brief idea). 03.02 Methods of increasing string efficiency. 03.03 Phenomenon of corona, corona discharge, critical voltage, power loss due to corona simple problems. 04 Distribution Systems 05 04.01 Choice of transmission voltage, conductor size and Kelvin's law, problems. 05 Extra High Voltage Transmission 04 05.01 Brief idea of extra high voltage transmission system Recommended Books SL Title/Publisher Author 1. Electrical Power (Generation, Transmission, Distribution, Protection and Utilization) Soni, Gupta, Bhatnagar 2. Electric Power Uppal 3. Electric Power (Hindi) D.R. Nagpa Reference Books SL Title/Publisher Author 1. Principles of Power System, S. Chand & Co., New Delhi. V.K. Mehta
3
ELECTRICAL MACHINE - I
Subject Code
20402
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 05 - - Internal Exam. : 20
Rationale The students are well conversant with the electric and magnetic field and circuit, electro-magnetic induction, D.C. and A.C. circuits, based on related electric and magnetic theories. They also know about electrical components and materials. Now the Machine - I is being introduced for Part-II diploma in Electrical Engineering to impart the knowledge of D.C. machines, which play vital roles even in this era of electronics in different industries throughout the world. The topics of requisites and construction of D.C. machines, generators, motors, converters, special motors and electro plating have been included in the content, which will give full insight of electrical equipments in their practical life. Topics have been divided into sub-topics in order to facilitate the students to understand the subject matters properly. Tentative no. of lectures have been allotted for each topic and sub-topic, so that the whole syllabus may be covered easily in the academic year. Objectives The thorough study of these topics will enable the students know fully about D.C. machines, their operation, maintenance and proper connection and hence will enable him to work as a good supervisor and also to efficiently monitor the works of operators under him. The topics of special motors used and that of electroplating will provide full insight of practical use of electrical equipments. CURRICULUM SL Topics Periods 1. Requisites and Construction of D.C. Machines 2. D.C. Generator 3. D.C. Motor Total 50 CONTENTS Topics Content 01 Requisites and Construction of D.C. Machines 15 01.01 Armature winding: Pole-pitch, conductor coil and winding elements, coil span, coil-pitch, pitch of winding, back
pitch, front pitch, resultant pitch, commutator pitch. 01.02 Single layer winding, lap and wave winding, use of lap and wave windings. 02 D.C. Generator 20 02.01 Types of generator, E.M.F. equation of generator. 02.02 Losses and efficiency of a generator, condition for maximum efficiency. 02.03 Armature reaction: Demagnetizing and cross-magnetizing conductions, demagnetizing ampere-turns per pole,
cross-magnetizing ampere-turn per pole. 02.04 Generator characteristics: No load curve of self-excited generator, How to find critical resistance, How to draw
O.C.C. at different speeds, critical speed, voltage build-up of a shunt generator, condition for voltage build-up of a shunt generator, voltage regulation, no-load saturation curve.
02.05 Use of different types of generators, simple problems. 03 D.C. Motor 15 03.01 Significance of back E.M.F., voltage equation of a motor, armature torque, shaft torque. 03.02 Characteristics of series shunt and compound motors. 03.03 Losses and efficiencies of a motor. 03.04 Speed control of a D.C. motor: Speed control of a series motor, speed control of a shunt motor, merits and
demerits of a rheostatic control method, series, parallel control, simple problems. 03.05 Testing of D.C. Motors: No-load test (Swin Burne's test) of D.C. shunt motor, back to back test (Nopkinson's
test), retardation test of a series motor. 03.06 Necessity of a starter. Shunt motor starter: 3-point starter, 4-point starter. Recommended Books SL Title/Publisher Author 1. Theory of Direct Current Machinery, TMN editions Alexander S. Langsdorf 2. A Text-Book of Electrical Technology, Vol. II B.L. Theraja 3. Electrical Machinery, Khanna Publications P.S. Pimbhra
4
MICROPROCESSOR & ITS APPLICATION
Subject Code
20403
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale The role of Microprocessor in all industries is well established. They are used in instrumentation, transportation, military equipments like tanks, radars etc. communication, automatic testing products, lift control, speed control of motors, automatic control of generator's voltage, fuel control of furnaces etc. Microcomputers play a dominant role in all spheres of our life and outcome is the evolution of microprocessors itself. Objectives In this introductory paper the students will be exposed to the basic concept of microprocessors using 8085. The idea is to make the students aware of the terminologies, its components and elementary idea of Assembly Language Programming. They will be acquainted with the microprocessor. Brief introduction given here about the recent trend and the microprocessor in common use these days, will enable the students the knowledge of Advanced Microprocessors in respect of Modern Control System. CURRICULUM SL Topics Periods 1. Organization of Microprocessors 2. Programming Technique 3. Motorola 6800 and Assembly Language 4. Interfacing 5. Introduction to 8086 Total 60 CONTENTS Topics Content 01 Organization of Microprocessors 12 01.01 Organization of microprocessors in general, Central Processing Unit (CPU), Arithmetic and Logic Unit
(ALU), Resistors, Counters, data and address process, ROM and RAM, I.O. devices. 02 Programming Technique 12 02.01 Architecture of 8085 programming technique used for 8085 for example, addition, subtraction,
multiplication of numbers using 8085. 03 Assembly Language of Intel 8085 12 03.01 Introduction to 8-bit microprocessor of Motorola 6800 and 2800. 04 Interfacing 12 04.01 Interfacing. 05 Introduction to 8086 12 05.01 Introduction to microprocessor, 8086, architecture, memory organization, address modes, data resistor
memory, I.O. devices of 8086, interrupt instructions and applications, floppy disk drive and hard disk drive, description of keyboards in brief.
Reference Books SL Title/Publisher Author 1. Fundamentals of Microprocessors and Microcomputers B. Ram 2. Digital Computer Electronics - An Introduction to Microprocessors A.P. Malvino 3. Microcomputers/Microprocessors Joh. L. Hilburn and P.M. Julich 4. Microprocessor Architecture, Programming and Application R.S. Goanker
5
ELECTRICAL ENGINEERING DRAWING
Subject Code
20404
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale For Electrical Engineering students the study of Electrical Engineering Drawing is essential. In the Part-I Diploma in Electrical Engineering course, the students were acquainted with fundamental of Projections and simple drawing. At Part-II stage level the students are required to prepare, understand, interpret drawing of electrical installation, electrical machine equipments and electrical circuits. They should be able to draw free hand sketches of electrical machine parts, various electrical equipments. Objectives The students should be able to read and interpret electrical engineering drawings to communicate and correlate through sketches and drawing of actual machines. They should be able to prepare working drawing of electrical machines, panel, transmission and distribution systems etc. CURRICULUM SL Topics Periods 1. Drawing from Sketches 2. Development of Machine Winding 3. Free Hand Sketches Total 60 CONTENTS Topics Content 01 Drawing from Sketches 20 To draw from sketches the fully dimensioned orthographic views of the following: 01.01 Different views of different types of nuts and bolts including foundation bolts with threads. 01.02 Different types of solid and flexible couplings Pulleys and V-belt drive used in Electrical Machine Drive. 01.03 Knifes switches: Single & Double types, Main Switches, Energy meters. 01.04 Pin insulators, Sackless Insulators and Disc type Insulators for L.T. and H.T. Lines. 01.05 Sketches of C.T., P.T. 02 Development of Machine Winding 15 02.01 D.C. pole windings. 02.02 D.C. Lap winding/Single and Double layer. 02.03 D.C. wave winding: Single and Double layer. 02.04 Placing of carbon brushes on the commutator segments showing the direction of current. 03 Free Hand Sketches 25 03.01 Different Industrial Electrical symbols. 03.02 Pole of Machine: Different views. 03.03 Armature of D.C. Machine: Different views. 03.04 Commutator of D. C. Machine: Different views. 03.05 D.C. Machine brush and brush holder. 03.06 Different types of poles and Towers with feeders and Distributors and Lightning Arrestors. 03.07 Battery Charging Circuit with Battery. 03.08 Earthing - different types. Recommended Books SL Title/Publisher Author 1. Electrical Drawing Narang 2. Electrical Engineering Drawing, Vol. I and II Pal and Lal 3. Manthial in Electrical Engineering Drawing J.T.T.I. Madras Reference Books SL Title/Publisher Author 1. Electrical Drawing Surjeet Singh
6
ELECTRICAL ESTIMATING & COSTING
Subject Code 20405
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale For any electrical project a proper layout requirements of equipments and items are essential features. The procurement of such items requires proper circuit diagram and relevant estimate. Objectives The students of electrical engineering diploma should have a sufficient knowledge of electrical circuit diagram and their estimates. The syllabus has been framed in the successive paragraph. This will provide the students to develop the skill with all confidence as per requirements of the industrial and commercial projects when they are placed in the field. CURRICULUM SL Topics Periods 1. Common Block and Circuit Diagram 2. Estimating and Costing Total 50 CONTENTS Topics Content 01 Common Block and Circuit Diagram 25 01.01 Block diagram showing the interconnection between Prime mover and generators. 01.02 Block diagram showing the interconnection Generators/supply and motors. 01.03 Open circuit test and load circuit test arrangement for D.C. Generator and Motor. 01.04 Parallel operation of D.C. Generators, circuit diagram showing necessary meters and bus-bars. 01.05 Different types of starters for D.C. motors and their circuit diagrams. 02 Estimating and Costing 25 02.01 To draw the house wiring diagram for domestic use and estimation of the quantity and cost (CTS,
clear, surface conduit and concealed wiring). 02.02 Power wiring diagram for small workshops having at least 5 motors and estimating cost for conduit type. 02.03 Power diagram for electrical substations (double feeder) including pole mounted type and estimating cost for it. 02.04 Layout and connection diagram for overhead lines connection from generator connection to distribution station
and estimating cost of materials for the same. 02.05 Use of lighting arrestors etc. for pole mounted and other sub-stations etc. and estimating cost for it. Recommended Books SL Title/Publisher Author 1. Electrical Estimating and Costing (Hindi Version) Jaggi
7
ELECTRICAL ENGINEERING Lab.
Subject Code
20406
Practical No of Period in one session : 60 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 - - 06 Internal Exam. : 10
Rationale In Electrical Machine - I, the students were imparted with the theoretical knowledge of the principles and working of different types of electrical machines, where they have been imparted with the theoretical knowledge at machines. After passing diploma, they will be required to work on the actual machines. Therefore it is essential for them to work on the actual machines. Objective Keeping in view, practical knowledge the syllabus of Electrical Engineering Lab. has been prepared so that it may bring boldness and confidence in the students regarding working electrical machines. LIST OF PRACTICALS Topics Content 01 D.C. Generator 01.01 Determination of hysteresis loop of a generator. 01.02 Determination of external characteristic/percentage voltage of a shunt generator against percentage output load. 01.03 Determination of external characteristic/percentage voltage of a series generator against percentage output load. 01.04 Determination of family of external characteristic/percentage voltage curves of a compound generator
performing load test as shunt, cumulative compound and differentially compounded generator. 01.05 Determination of efficiency of two similar generators coupled (Hopkinson's test / regenerative test). 01.06 Determination of external characteristic of a generator by performing open circuit and short circuit test. 01.07 Determination of armature resistance and field coil resistance by voltmeter and ammeter method with D.C.
supply. 01.08 Determination of magnetization characteristics ( O.C.C) of a D.C Shant generator. 01.09 Study of D.C. machine including development of armature winding 02 D.C. Motor 02.01 Determination of percentage speed verses field current characteristic curve of a shunt or a compound motor. 02.02 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. shunt motor by performing load test with mechanical breaking arrangement. 02.03 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. motor by performing load test (if there is any coupled D.C. motor) 02.04 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. series motor by performing load test with mechanical breaking arrangement. 02.05 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. compound motor by performing load test with mechanical breaking arrangement. 02.06 Determination of percentage speed verses armature voltage curve at full excitation and half excitation. (like
Warleonard control) 02.07 Determination of family of curves of percentage speed verses output of a shunt motor by putting different
values of resistance is series with the armature and performing load test. 02.08 Study of a three point manual starter. 02.09 Study of a four point manual starter. 02.10 Study of a drum controller of a D.C. series motor. 02.11 Study of an automatic starter of a D.C. motor. 02.12 Study of speed control of a D.C. Shunt motor (Various methods)
8
ELECTRONICS & MICROPROCESSOR Lab.
Subject Code
20407
Practical No of Period in one session : 120 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 - - 09 Internal Exam. : 10
Rationale The importance of the microprocessor based systems is well established. With the advent of microprocessor only the world of Digital Computer found its place in every sphere of our life. There are numerous application of this technology in the industries for control and efficient running of machineries. It is therefore essential that the students the students who read about this technology should also perform experiments to acquaint themselves with the actual working. The machine language which is the nearest programming language and is in close association of the Assembly Language to be introduced in this subject for practice. This subject will also enable the students to have an idea of memory management in Digital Computers. Objectives This will enable the students to have practical and physical concept of digital and electronics equipments. Thus it will make them a good supervisor for location and replacement of the faulty components. LIST OF PRACTICALS SL Experiments
1. Study of logic trainer kit and verification of Truth Table in respect of following: a. AND gate b. OR gate c. NAND gate d. NOR gate e. EX-OR gate
2. Study of the Microprocessor Kit (8085 based). 3. Study of D-Flip Flop and T-Flip Flop. 4. Programming to add two 8-bit numbers: Sum 8-bit. 5. Programming for 8-unit subtraction. 6. Decimal addition of two 8-bit numbers, Sum 16-bit. 7. Programming practice for 1's and 2's complement of a number. 8. Shifting an 8-bit number (left shift and right shift). 9. Program to find the largest and smallest numbers from a series of numbers stored in memory. 10. Program to arrange a series of numbers in ascending and descending order. 11. Interfacing of A/D converter (ADC 0800). 12. Display of Alphabetic and Numeric characters in the data field using LED display. 13. Measurement of Frequency. 14. Measurement and monitoring of Temperature. 15. To draw the static characteristic of a junction diode. 16. To measure the amplification factor of a NPN or PNP transistor. 17. To connect a common emitter amplifier and measure the gain. 18. Assembling and testing of a burglar's alarm etc.
9
ELECTRICAL ENGINEERING Lab.
Subject Code 20408
Sessional No of Period in one session : - No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 - - - Internal Exam. : 20
Rationale In Electrical Machine - I, the students were imparted with the theoretical knowledge of the principles and working of different types of electrical machines, where they have been imparted with the theoretical knowledge at machines. After passing diploma, they will be required to work on the actual machines. Therefore it is essential for them to work on the actual machines. Objective Keeping in view, practical knowledge the syllabus of Electrical Engineering Lab. has been prepared so that it may bring boldness and confidence in the students regarding working electrical machines. LIST OF PRACTICALS Topics Content 01 D.C. Generator 01.01 Determination of hysteresis loop of a generator. 01.02 Determination of external characteristic/percentage voltage of a shunt generator against percentage output load. 01.03 Determination of external characteristic/percentage voltage of a series generator against percentage output load. 01.04 Determination of family of external characteristic/percentage voltage curves of a compound generator
performing load test as shunt, cumulative compound and differentially compounded generator. 01.05 Determination of efficiency of two similar generators coupled (Hopkinson's test / regenerative test). 01.06 Determination of external characteristic of a generator by performing open circuit and short circuit test. 01.07 Determination of armature resistance and field coil resistance by voltmeter and ammeter method with D.C.
supply. 01.08 Determination of magnetization characteristics ( O.C.C) of a D.C Shant generator. 01.09 Study of D.C. machine including development of armature winding 02 D.C. Motor 02.01 Determination of percentage speed verses field current characteristic curve of a shunt or a compound motor. 02.02 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. shunt motor by performing load test with mechanical breaking arrangement. 02.03 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. motor by performing load test (if there is any coupled D.C. motor) 02.04 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. series motor by performing load test with mechanical breaking arrangement. 02.05 Determination of percentage speed, percentage efficiency and percentage regulation curve against percentage
output of a D.C. compound motor by performing load test with mechanical breaking arrangement. 02.06 Determination of percentage speed verses armature voltage curve at full excitation and half excitation. (like
Warleonard control) 02.07 Determination of family of curves of percentage speed verses output of a shunt motor by putting different
values of resistance is series with the armature and performing load test. 02.08 Study of a three point manual starter. 02.09 Study of a four point manual starter. 02.10 Study of a drum controller of a D.C. series motor. 02.11 Study of an automatic starter of a D.C. motor. 02.12 Study of speed control of a D.C. Shunt motor (Various methods)
10
ELECTRONICS & MICROPROCESSOR Lab.
Subject Code 20409
Sessional No of Period in one session : No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 - - - Internal Exam. : 20
Rationale The importance of the microprocessor based systems is well established. With the advent of microprocessor only the world of Digital Computer found its place in every sphere of our life. There are numerous application of this technology in the industries for control and efficient running of machineries. It is therefore essential that the students the students who read about this technology should also perform experiments to acquaint themselves with the actual working. The machine language which is the nearest programming language and is in close association of the Assembly Language to be introduced in this subject for practice. This subject will also enable the students to have an idea of memory management in Digital Computers. Objectives This will enable the students to have practical and physical concept of digital and electronics equipments. Thus it will make them a good supervisor for location and replacement of the faulty components. LIST OF PRACTICALS SL Experiments
1. Study of logic trainer kit and verification of Truth Table in respect of following: a. AND gate b. OR gate c. NAND gate d. NOR gate e. EX-OR gate
2. Study of the Microprocessor Kit (8085 based). 3. Study of D-Flip Flop and T-Flip Flop. 4. Programming to add two 8-bit numbers: Sum 8-bit. 5. Programming for 8-unit subtraction. 6. Decimal addition of two 8-bit numbers, Sum 16-bit. 7. Programming practice for 1's and 2's complement of a number. 8. Shifting an 8-bit number (left shift and right shift). 9. Program to find the largest and smallest numbers from a series of numbers stored in memory. 10. Program to arrange a series of numbers in ascending and descending order. 11. Interfacing of A/D converter (ADC 0800). 12. Display of Alphabetic and Numeric characters in the data field using LED display. 13. Measurement of Frequency. 14. Measurement and monitoring of Temperature. 15. To draw the static characteristic of a junction diode. 16. To measure the amplification factor of a NPN or PNP transistor. 17. To connect a common emitter amplifier and measure the gain. 18. Assembling and testing of a burglar's alarm etc.
11
12
ELECTRICAL ENGINEERING DRAWING
Subject Code 20410
Sessional No of Period in one session : - No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 60 - - Internal Exam. : 40
Rationale For Electrical Engineering students the study of Electrical Engineering Drawing is essential. In the Part-I Diploma in Electrical Engineering course, the students were acquainted with fundamental of Projections and simple drawing. At Part-II stage level the students are required to prepare, understand, interpret drawing of electrical installation, electrical machine equipments and electrical circuits. They should be able to draw free hand sketches of electrical machine parts, various electrical equipments. Objectives The students should be able to read and interpret electrical engineering drawings to communicate and correlate through sketches and drawing of actual machines. They should be able to prepare working drawing of electrical machines, panel, transmission and distribution systems etc. CURRICULUM SL Topics Periods 1. Drawing from Sketches 2. Development of Machine Winding 3. Free Hand Sketches Total 60 CONTENTS Topics Content 01 Drawing from Sketches To draw from sketches the fully dimensioned orthographic views of the following: 01.01 Different views of different types of nuts and bolts including foundation bolts with threads. 01.02 Different types of solid and flexible couplings Pulleys and V-belt drive used in Electrical Machine Drive. 01.03 Knifes switches: Single & Double types, Main Switches, Energy meters. 01.04 Pin insulators, Sackless Insulators and Disc type Insulators for L.T. and H.T. Lines. 01.05 Sketches of C.T., P.T. 02 Development of Machine Winding 02.01 D.C. pole windings. 02.02 D.C. Lap winding/Single and Double layer. 02.03 D.C. wave winding: Single and Double layer. 02.04 Placing of carbon brushes on the commutator segments showing the direction of current. 03 Free Hand Sketches 03.01 Different Industrial Electrical symbols. 03.02 Pole of Machine: Different views. 03.03 Armature of D.C. Machine: Different views. 03.04 Commutator of D. C. Machine: Different views. 03.05 D.C. Machine brush and brush holder. 03.06 Different types of poles and Towers with feeders and Distributors and Lightning Arrestors. 03.07 Battery Charging Circuit with Battery. 03.08 Earthing - different types. Recommended Books SL Title/Publisher Author 1. Electrical Drawing Narang 2. Electrical Engineering Drawing, Vol. I and II Pal and Lal 3. Manthial in Electrical Engineering Drawing J.T.T.I. Madras Reference Books SL Title/Publisher Author 1. Electrical Drawing Surjeet Singh
1
Total Periods per Week 42 Total Marks 750
Scheme of Teaching and Examination for
IV Semester DIPLOMA in MECHANICAL (AUTOMOBILE) ENGINEERING
THEORY
Sl.
No. SUBJECTS
SUBJECT
CODE
TEACHING
SCHEME EXAMINATION SCHEME
Periods
per
Week
Periods
in one
Session
Hours
of
Exam.
Terminal
Exam.
(A)
Marks
Final
Exam.
(B)
Marks
Total
Marks
(A+B)
Pass
Marks
Final
Exam.
Pass
Marks
in the
Subject
1 Automobile
Engineering-II 33401 4 60 3 20 80 100 26 36
2 Manufacturing
Technology - I 25402 5 60 3 20 80 100 26 36
3 Machine
Drawing 33403 9 120 4 20 80 100 26 36
4 Theory of
Machines 25404 6 60 3 20 80 100 26 36
5 Hydraulics and
fluid Mechanics 25405 5 60 3 20 80 100 26 36
Total :- 29 500
PRACTICAL
Sl.
No.
SUBJECTS
SUBJECT
CODE
TEACHING
SCHEME
EXAMINATION SCHEME
Periods
per
Week
Periods
in
one
Session
Hours
of
Exam.
Marks
Internal
Exam.
(A)
Marks
External
Exam.
(B)
Total
Marks
(A+B)
Pass
Marks
Final
Exam.
Pass
Marks
in the
Subject
6 Workshop
Practice 25406 9 120 6 10 40 50 16 21
7 Hydraulics and
fluid Mechanics
Lab.
25407 4 60 3 10 40 50 16 21
Total :- 13 100
SESSIONAL
Sl.
No.
SUBJECTS SUBJE
CODE
TEACHING
SCHEME
EXAMINATION SCHEME
Periods
per
Week
Periods
in One
Session
Marks of
Internal
Examiner (X)
Marks of
External
Examiner (Y)
Total
Marks
(X+Y)
Pass Marks
in the
Subject
7 Workshop
Practice 25408 - - 20 30 50 25
8 Machine
Drawing 33409 - - 40 60 100 50
Total :- 150
2
AUTOMOBILE ENGINEERING - II
Subject Code
33401
Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
04 - - Internal Exam. : 20
Rationale
Though the students have already studied in brief the anatomy and physiology of automobile vehicles and component parts, they are
further required to study in detail about the materials working principles and their functions fuel lubricating oil and cooling principles
and electrical system as they may choose career in automobile industry and repair shop.
Objectives The students will be able to:
Describe the category of vehicles on the basis of use, Capacity wheels and axles, drive no of cylinder and single mountings.
Explain the constructions and function of each engine component parts.
Describe the types of fuel used in engine petrol and diesel.
Explain air fuel ratio chemically correct mixture, most economical A/F ratio, combustion knock, detonation, antiknock quality,
octane & cetane number.
Explain the principle of carburetion, construction and function of simple carburetor.
Describe the working of spark ignition and compression ignition engine.
Explain with sketches the construction and function of the components used in fuel supply system in petrol engine.
Explain with sketches the construction and function of the elements used in fuel supply system in diesel engine.
Explain with sketches intake and exhaust system, inlet and exhaust manifold, their types and component parts.
Explain the working of supercharger and turbocharger in C.I. Engine.
Explain the need of cooling, types of cooling system, elements of cooling system, types of coolant used.
Explain need of lubrication, its classification type of lubricants and their properties and various gradings.
Describe the electrical system as a whole and explain with sketches the electrical circuits in S.I. and C.I. Engines, generation of
electrical energy.
Explain the construction and function of condenser, ignition, coil distributor, C.B. points/ Dynamo/ alternator, cut-out and regulator.
Explain the starting system including Bendix drive.
Explain the working of lighting and signaling points, horn, audio equipment and wiper.
CURRICULUM
SL Topics Periods 1. Review 02
2. Types of Automobile 02
3. Engines 09
4. Valves 03
5. Fuels 04
6. Carburetor 03
7. Spark Ignition Engine and Compression Ignition Engine 03
8. Fuel Supply System in S.I. Engines 03
9. Fuel Supply System in C.I. Engines 06
10. Intake and Exhaust System 05
11. Cooling System for Engines 05
12. Lubrication System 03
13. Electrical System 12
Total 60
3
CONTENTS
Topics Content Periods
01. Review 02
01.01 Review of topics covered in the paper Automobile Engineering - I.
02. Types of Automobiles 02
02.01 Types of automobile with respect to use, capacity, wheels and axles, drive number of cylinders and engine mounting.
03. Engines 09 03.01 Brief description of Diesel and Petrol engines.
03.02 Cylinder block and liner construction and function/multi-valve cylinder.
03.02.01 Cylinder head construction and function gasket.
03.03 Piston gudgeon pin, function, construction.
03.03.01 Piston rings, types, function and construction.
03.03.02 Connecting rod, working and construction, big and small end, bush and bearing.
03.04 Crankshaft, construction, line diagram and working, bearing (types) lubrication, connecting rod alignment,
balancing of crankshaft.
03.04.01 Flywheel - functions, construction starting ring friction surface.
04. Valves 03 04.01 Functions and Construction of Valves and their parts.
04.02 Functions and construction of Cams and Followers. Pushrod and Rocker Arm. Camshaft - function and
construction.
05. Fuels 04 05.01 Types of fuels used in automobile engines petrol, diesel, air fuel ratio, chemically correct mixture, most economical
06. Carburetor 03 06.01 Carburetion process meaning operation.
06.02 Simple carburetor, working theory on Bernoulli's equation, construction and working details.
07. Spark Ignition Engine and Compression Ignition Engine 03 07.01 Construction and working of Spark Ignition Engine and Compression Ignition Engine.
08. Fuel Supply System in S.I. Engines 03 08.01 Types of Fuel Feed System, Components of fuel system, Fuel tank filters and screens fuel lines, Fuel Gauges,
Air-Cleaner, Fuel Pump, A.C. Mechanical fuel pump, Electric fuel pump.
09. Fuel Supply System in C.I. Engines 06 09.01 Fuel Feed System, Diaphragm type pump, Plunger type pump.
09.02 Fuel injection pump, Nozzle and its function types, Fuel injection unit.
10. Intake and Exhaust System 05 10.01 Intake manifold (S.I. and C.I. Engine).
10.02 Exhaust manifold, Different types of Muffler and Tailpipe.
10.03 Supercharger, turbocharger in C.I. Engine.
11. Cooling System for Engines 05 11.01 Need of cooling engines, types of cooling systems, air and water cooling radiator - tubular and cellular types,
Thermostat valve water pump, cooling fans, coolant.
12. Lubrication System 03
4
12.01 Need of Lubrication.
12.02 Types of Lubrication System. Gravity Feed, Force Feed.
13. Electrical System 12 13.01 Main circuits of electrical system in S.I. and C.I. engine vehicles.
13.02 Generation of electrical energy in automobiles. Battery testing, battery charging
13.03 Condenser, Ignition Coil, Distributor C.B. Point, Firing order.
13.04 Dynamo alternator, cut-out, control of voltage and current.
13.05 Starting systems, Bendire drive.
13.06 Different lighting and signaling points, Horn, Audio Equipment, Wiper.
Recommended Books
SL Title/Publisher Author
1. Automobile Engineering, Khanna Publishers, New Delhi. G.B.S. Narang
2. Automobile Engineering R. P. Sharma
3. Automobile Engineering Dr. Kirpal Singh
4. Automobile Engineering J. Heitner
5. The Automobile Rayat Harbans Singh
6. Automobile Engineering Banga and Singh
7. Elements of Automobile Engineering G.B.S. Narang
8. Know your Motor-cycle and Scooter Reyat Harbans Singh
9. Automobile Engineering K. Prasad
10. Automobile Vehicle Newton and Steel
5
MANUFACTURING TECHNOLOGY - I
Subject Code
25402
Theory No of Period in one session : 60
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
05 - - Internal Exam. : 20
Rationale:
A nation is strong if the industries are strong. A nation is self dependent if it produces its all requirements with its own
resources and industry and should have the capacity to export materials in other countries.
A diploma holder technician has to play a vital role in industries. He has to work as a bridge in between Management and
Labour.
An industry is rich if its workshop is rich. A workshop is rich if it has recent machines in good number and technical staffs
(having good concepts) in sufficient no. A diploma holder technician plays a vital role in act and guidance inside a workshop.
Objective:
For building a diploma holder technician to be more practical with good concept of theories the paper Manufacturing
Technology – I has been framed. With the help of this paper a person will be able to get the almost all basic concepts of workshop.
The students will be able to:
(i) Know the basic principles of workshop.
(ii) Select materials, tools, equipments more speedily accurately.
(iii) Prepare a job as per requirement (either by casting of machining).
(iv) Check the qualities and specification of job, tools and equipments.
(v) Develop managerial skill.
S.No. Topics Periods
01 Workshop Management (04)
02 Lathe (14)
03 Shaper and Planner (08)
04 Drilling & Boring Machines (04)
05 General Knowledge of Different Types of Machines (04)
06 Welding (08)
07 Pattern Making (08)
08 Moulding (05)
09 Casting (05)
Total : (60)
CONTENTS:
TOPIC: 01 – WORKSHOP MANAGEMENT:
01.01 Rules and regulations of working in workshop
01.02 Duties and responsibilities of Foreman.
01.03 Algorithm or flow diagram for competing a job in different sections of workshop
01.04 Tools used in different section.
TOPIC: 02 – LATHE:
02.01 Introduction, terminology used in lathe: feed, depth of cut, cutting speed, R.P.M. of pass etc.
02.02 Types of lathe, centre lathe, capstan lathe, turret lathe, automatic lathe of
computer guided lathe (C.N.C. lathe)02)
02.03 Constructional details of centre lathe.
02.04 Specification of lathe. Difference between centre lathe & turret lathe.
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale & Objective: Every printed product consists of text portion and illustrations, with the former occupying mechanical portion knowledge of text setting methods and equipment used for setting text, which is broadly termed Letter Assembly, therefore very essential. The aim of this subject is to study letter assembly as an important part of print-production techniques, to enable the students to make judgment about the aspect of printing, particularly in relation to the requirements of designing the printed products. This will cover development of typesetting methods, preparation for type setting inputs and outputs, page assembly, proofing imposition and planning. The aim is to further develop the student’s understanding and knowledge of letter assembly equipment, particularly in the areas of on-line integrated system, image generation system, editing and corrections, electronic page assembly, digital storage and outputs. S.No. Topics Periods 01 Introduction (06) 02 Preparation for Typesetting (09) 03 Letter Assembly System (06) 04 Typesetting Routines (06) 05 Introduction to Phototypesetting (09) 06 Typesetting Input (06) 07 Photo-typesetting Output (06) 08 Page Assembling and Proofing (06) 09 Imposition and Planning (06) CONTENTS: TOPIC: 01 – INTRODUCTION: [06] 01.01 Historical development of Typesetting from Gutenberg to present. 01.02 Review of various systems and their relationship with current production methods. TOPIC: 02 – PREPARATION FOR TYPESETTING: [09] 02.01 Typographical unit of measurement. Angle-American point system. 02.02 Units of set, measurement of length; 02.03 Preparation of copy, house style. 02.04 Proof-reading. 02.05 Casting- off and copy fitting. TOPIC: 03 – LETTER ASSEMBLY SYSTEM: [06] 03.01 Handsetting, Mechanical typesetting, typewriter composition phototypesetting, computerized typesetting. 03.02 Display composition by various system. 03.03 Editing, correction and page-make up in all the systems. TOPIC: 04 –TYPESETTING ROUTINES: [06] 04.01 Different kinds of setting poetry; table, tabular, mathematical, scientific work, etc. 04.02 Methodical approach for each kind of job, tools, accessories, and precision aids,
used in the letter assembly departments and their purposes.
2
TOPIC: 05 –INTRODUCTION TO PHOTOTYPESETTING: [09] 05.01 Development from the earliest to the present. 05.02 Principles of first to present generations photo-typesetting machines, their
performance and usage. TOPIC: 06 –TYPESETTING INPUT: [06] 06.01 Counting and non-counting keyboard, keyboard layout and ergonomics. TOPIC: 07 –PHOTO-TYPESETTING OUTPUT: [06] 07.01 Application of various photo-typesetter, scopes, and limitation. 07.02 Processing of photo-typesetting output. TOPIC: 08 –PAGE ASSEMBLING AND PROOFING: [06] 08.01 Make-up of photo-typesetting products for book, magazine, newspaper, and general
printing. 08.02 Equipment and materials used. 08.03 Photo headline setting and transfer lettering systems for display composition. 08.04 Proofing Techniques-matrix printer, diazzo, electrostatic, diffusion transfer,
photographic. TOPIC: 09 –IMPOSITION AND PLANNING: [06] 09.01 Page shapes, margins, and size in relation to paper size. 09.02 Rules for Imposotion upto 32 pages. 09.03 Accommodation of press and Finishing requirements, sheet work and halfsheet
work, grip edge, signature and register marks.
3
BINDING & FINISHING - I
Subject Code 34402
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale & Objective: This is a core subject-After printing is complete; the printed sheets are required to be put in a proper shape such as books, magazine, registers, etc. For this, knowledge of various methods and techniques of binding and finishing is very essential. A diploma holder is required to supervise the binding and finishing section in a press. S.No. Topics Periods 01 Warehouse Operations. (08) 02 Securing Operations. (08) 03 Forwarding Operations. (08) 04 Binding Techniques (08) 05 Preparation and Attaching Boards. (08) 06 Covering Operations.. (05) 07 Finishing. (05) CONTENTS: TOPIC: 01 – WAREHOUSE OPERATIONS. [08] 01.01 Printed paper warehouse and white paper warehouse, storing temperature, humidity, materials handing,
safety. 01.02 Paper buying, stocking, storage and issue. 01.03 International paper sizes, and I.S.I. paper sizes, advantages, grammes per square metre GSM), ethod of
substances specification; old imperial sizes and subdivisions of paper. TOPIC: 02 – SECURING OPERATIONS: [08] 02.01 Use of thread, tape, cord, wire-stitching, looping, gluing, pasting, covering, pamplet, work. 02.02 Different kinds of sewing, cord sewing and tape sewing, hand sewing and machine sewing, two-on and all-
along sewing, over casting for loose-leaf works, suitability for different styles of binding. 02.03 End papers: single, made –end paper, reinforced, cloth-joint, leather-joint, silk-fly leaf and leather –flyleaf.
Zigzag end papers, their object. TOPIC: 03 – FORWARDING OPERATIONS. [08] 03.01 In board and out –board forwarding, different kinds of binding and styles, publishers, library, miscellaneous
and deluxe extra leather, stationery binding- characteristics. 03.02 Gluing the back; founding and backing objects, care and precautions, reducing swelling in the back, flat
backs, back lining. TOPIC: 04 –BINDING TECHNIQUES [08] 04.01 Adhesive binding, thermoplastic, unsewn, threadless and perfect binding. TOPIC: 05 –PREPARATION AND ATTACHING BOARDS [08] 05.01 Dimensional variation of boards, lining, cutting to size, warping of boards, prevention, attaching boards,
lacing-in-split-board work. TOPIC: 06 –COVERING OPERATION: [05] 06.01 Different kinds of covering materials, selecting leather as other materials, measuring and cutting to size and
shape, applying adhesive and turning it, pressing, setting the groove or joints, settings the head, setting the band, polishing pressing and pasting down.
TOPIC: 07 – FINISHING [05] 07.01 Decorating the cover of the book with the finishing tools, blind blocking, gold blocking and sliding hand
tools, fillets pallets, rules. Lottering, type holder, brass type, marking for tooling and lettering, heating, testing and pressing, cleaning, inlaying, lacing and bands open up and pressing.
07.02 Edge decoration, colouring, spraying marbling, guilding, gauffereing or tooling the edges, head bands, handmade and machine-made head bands.
4
PRINTING PROCESS - I
Subject Code 34403
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 04 - - Internal Exam. : 20
Rationale & Objective: It is a core subject of printing technology, It is essential for students to learn about the basics of various printing processes. Process photography, techniques of printing surface preparation and printing machines. CONTENTS: 1. Printing Industry- historical background and structure. 2. Principles Involved and characteristics of different printing process-their suitability and limitations. 3. Introduction to Relief surface and Plano graphic surface. 4. Introduction to equipments and tools used for all printing processes. 5. Introduction to process photography: types of process cameras-their constructions and functioning-
making negatives and positives. 6. Introduction to Surface Preparation (Overview only)
5
PRINTER’S DESIGN
Subject Code
34404
Theory No of Period in one session : 50 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale & Objective: Even printed product should be designed before it is send to the printers or executing the work. The pront-technician should have a clear perspective of the design principles involved in designing a product, as the designing on the printing process to be decided. The aim of this subject will be to introduce the study of printed products, introduction to type and typography, design method, design organisation, visual studies, techniques of copy preparation, layouts and dummy for all kinds of jobs. The aim is to further examine in details to design consideration and corporate design planning applied to different types of products, and to allow the students to apply the knowledge gained in the professional carrier. S.No. Topics Periods 01 Various kinds for Printed Products, their format, and Design factors. (06) 02 Design and Typographic Elements (06) 03 Colour Elements (08) 04 Illustrative Elements (05) 05 Layout Preparation (08) 06 Typography (06) 07 Planning for Production (05) 08 Display Composition (06) CONTENTS: TOPIC: 01 – VARIOUS KINDS OF PRINTED PRODUCTS, THEIR FORMAT, AND DESIGN FACTORS: [06] 01.01 Leaflets, pamphlets, booklets, catalogyes, brochures, manuals, books. 01.02 Magazines and Newspapers. 01.03 Business forms and commercial stationary. 01.04 Labels, cartons, point-of-sale displays, etc. 01.05 Factors to be considered in print planning, such as, purpose, budget, materials etc. TOPIC: 02 – DESIGN AND TYPOGRAPHIC ELEMENTS: [06] 02.01 Identification of design terms; point, line, space, shape, mass, size and scale, colour, tone,
texture, pattern, balance and contrast. 02.02 Typographic Elements. 02.03 Type fundamentals, main groups of type face designs, type series, type families. 02.04 Choosing type face suitable to the subject or product, relation between type face and printing
processes, type face and paper surfaces. 02.05 Legibility and readability. 02.06 Monograms, trade-marks and logotypes. TOPIC: 03 – COLOUR ELEMENTS: [08] 03.01 Colour theory. Terms used to describe colour: warm and cold colours, hue, shade, tint. 03.02 Colour wheel. Term to describe their relationships, between colours, complementary colour,
split-complementary colours, selection of colours for two or three or four colours jobs. Attributes and emotional appeal of colour.
03.03 Choose and effective use of colours, colour harmony, colour contrast and colour values.
6
TOPIC: 04 –ILLUSTRATIVE ELEMENT [05] 04.01 Types of originals for illustration and re-production: continuous tone copy, line drawings, black
and white and colour. 04.02 Requirements of art work and originals for reproduction, treatment of photographs,
photomechanical transfer materials and their use. 04.03 Black and white photographs, high contrast and low contrast; improving quality of photographic
pronts; masking , scaling, cropping of illustration, reduction and enlargements; size of reproduction; care and protection; air brush and its use.
TOPIC: 05 –LAYOUT PREPARATION: [08] 05.01 Materials, equipments and techniques used in the preparation of layout and art work. 05.02 Basic geometric shapes, disposition of elements and space; principles of symmetrical and
asymmetrical arrangements; distinction between geometric and optical centres. 05.03 Preparation of the layouts, analysis of briefs, stages and house styles. 05.04 Methods of producing different forms of layout. 05.05 Page structures, arrangement of illustration and text matter. 05.06 Dummy preparation. TOPIC: 06 –TYPOGRAPHY: [06] 06.01 Methods of preparing a design in its various stages, for different classes of work book, display,
news, magazines and other kinds, typographic specifications for different classes of work. 06.02 Copy preparation for different classes of work in relation to typesetting systems, artworks
preparation for different printing processes paper etc. 06.03 Materials and tools used in preparation of layouts and art work. TOPIC: 07 –PLANNING FOR PRODUCTION: [05] 07.01 Selection and colour limitation of production processes, jobs selections, consideration of
available methods of composition method possibilities and limitations of Bindings and ancillary processes as they affect design.
07.02 Technical influences and the selection and specification of ink, paper and other materials in relation to job specifications and the different production processes decided.
07.03 Casting-off copy, principles of copy-fitting, copy fitting tables. 07.04 Preparation of page: layouts for different parts of the book and preparation of dummies. TOPIC: 08 –DISPLAY COMPOSITION: [06] 08.01 Principles of display, factors affecting display setting, effective use of white space. Line shape
and size of space, the type face combinations, suitability, use of initials, the techniques of layouts arrangements to guide the eye-dividing an area-use of grid preparation of dummy of different kinds of jobs.
7
REPRODUCTION & PHOTOGRAPHY - I
Subject Code 34405
Theory No of Period in one session : 60 No. of Periods Per Week Full Marks : 100 L T P/S Annual Exam. : 80 06 - - Internal Exam. : 20
Rationale & Objective: Potomechanics, transfer of image and electronic image generation of the photography and their importance for a student to learn, in making tinting for the job and mainly deals with operation and handling of different equipments , machinery etc, used for reproduction photography. S.No. Topics Periods 01 Function of graphic reproduction (08) 02 Optical system (08) 03 Cameras (08) 04 Illuminants (08) 05 Emulsion for graphic reproduction photography (07) 06 Line and Halftone photography (07) 07 Contact Processing (07) 08 Processing. (07) CONTENTS: TOPIC: 01 – FUNCTION OF GRAPHIC REPRODUCTION: [08] Functions of graphic reproduction, Definitions of graphic reproduction photography; Originals for graphic
reproduction classification of originals, line originals, Half Tone, Continuous tone, full colour originals, requirements of originals, scaling the originals.
TOPIC: 02 – OPTICAL SYSTEM [08] 02.01 Lenses. Lens aberrations, process lens, optical reversal, straight line reversal, lens aperture, diaphragm, its
functions depth of focus, depth of field, water house etc. TOPIC: 03 – CAMERAS [08] 03.01 Different types of process cameras and accessories, e.g. horizontal, dark room, vertical, vertical enlarger-
types camera, roll-film cameras, Computerised Camera evaluation of modern cameras. TOPIC: 04 –ILLUMINANATS [08] 04.01 Classification, requirements, colour temperature, comparative study of different illuminants, carbon are
lamps open and enclosed, incandescent lamps, tungsten, halogen lamps, pulsed xenon lamps, lens flap, units of illumination, inverse square law, relative intensity exposure calculations.
TOPIC: 05 –EMULSIONS FOR GRAPHIC REPRODUCTION PHOTOGRAPHY [07] 05.01 Ingredients, brief description of manufacture of emulsions, types of emulsions, emulsion structure,
Requirement of emulsions, emulsion structure, Requirements of emulsion. Study of sensitometric waves-characteristic and gama curves. Latent image Theory : Reciprocity failure, intermittency effect, cavalier effect, etc.
TOPIC: 06 –LINE AND HALFTONE PHOTOGRAPHY: [07] 06.01 Basic Line exposure, magnification factor, line photography from black and white, and colour line
originals, evaluation of line negatives. Brief study of halftone screens, manufacture, halftone theories, screen distance calculations, inverse system Various ratio system-calculations, Halftone exposure-single and multiple exposure system, flash no-screen exposure principles of dot formation, evaluation of halftone, negative & positives
TOPIC: 07 – CONTACT PROCESSING [07] 07.01 Application of Contact printing, determining the correct exposure dots, soft dots, spreads and chokes for
multi-colour printing inspection of negatives and positives. TOPIC: 08 –PROCESSING: [07] 08.01 Developers, Ingredients and their function. Different developers, their suitability, factors affecting of
development, method of development, automatic processor, stop bath, fixing bath, their functions.
8
PRINTER’S PROCESS LAB - I
Subject Code
34406
Practical No of Period in one session : 50 No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40 - - 04 Internal Exam. : 10
1. Letter Assembly: Lay of case, use of tools and equipments, use of spacing materials, setting
straight matter, setting techniques, proofing. 2. Process Photography: Handling and operation of process camera their units and accessories,
making negatives and positives. 2. Surface Preparation:
(a) Use of equipments and accessories for plate making, graining, counter-etching, preparing coating, solution, coating plate for albumen process and;
(b) Equipments and tools used for making a line block.
9
PRINTER’S DESIGN LAB.
Subject Code
34407
Practical No of Period in one session : 50 No. of Periods Per Week Full Marks : 50 L T P/S Annual Exam. : 40 - - 04 Internal Exam. : 10
1. Collection and study of all verities of printed materials. 2. Classification of types faces: Block letters, Old face Transitional, Modern and Decorative types. 3. Identification of different display faces: method. 4. Layout procedure: Interpretation of copy and layout, preparing composing room layouts rough and
finished layouts. 5. Tools of the layout man; care and handling. 6. Materials for the layout; preparation. 7. Lettering for layouts techniques. 8. Layout for simple title pages, letterheads, visiting cards envelopes, greeting cards, invitations,
certificates, advertisements and folders. 9. Designing of monograms ands trade marks. 10. Study of various kinds of originals used in the printed materials. 11. Study of colour and mixing of colours, two-three-colour-combinations. 12. Practicing layout and dummies for various, class of work: book, display, news, magazines, and
other kinds of job work. 13. Practicing the techniques of copy preparation.
10
LETTER ASSEMBLY LAB -I
Subject Code
34408
Practical No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 - - 04 Internal Exam. : 10
1. Typesetting Routines
Setting various kinds of work-text/ poetry, table and tabular and display work by hand setting, mechanical composition and photo-typesetting.
2. Make up of pages
Procedure for making-up for different kinds of text pages which includes various components, such as, headlines and folio, footnotes, let-in-notes, let-in-notes, labels. Illustration with legends etc Make –up of preliminary and supplementary pages of books.
3. Display Composition
Setting up of display job as per the layouts, using suitable typesetting system for different kinds of display jobs
4. Practical work with different, proofing techniques 5. Imposition
Imposition up to 32 pages for upright and Landscape pages, half sheet and sheet work. 6. Practicing for keyboard operation for phototypesetting.
11
BINDING & FINISHING LAB - I
Subject Code 34409
Practical No of Period in one session : 50 No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 40 - - 04 Internal Exam. : 10
1. Study of tools and machinery, their uses and care in handling. 2. Materials and supplies essential for a book binding department. 3. Folding, counting and jogging. 4. Side and saddle Odd and even number stitching. 5. Endpapers. 6. Styles of binding: Quarter-bound cut-flush (library sewing). Quarter-bound turned in (library
sewing) Quarter-bound turned in (Sawn-in Sewing) 7. Manifield book (Carbon duplicate book) 8. Tear-off pad. 9. One letter Index book, Styles of binding Quarter-bound turned-in with squares (Flexible sewing), Quarter-bound turned –
in with squares (Two-on sewing), case binding (Overcast sewing), Publishers binding (Library sewing).
10. Half-bound (conventional method); Calico and marble with gilding, spine preparing and spine decorating with ink. Photo-album with colour strings.
11. Account book binding: Hall bound (Modern style) leather and calico and gilding, file making of loose-leaf binding with screws.
12. Rebinding-Case binding. 13. Writing pad with gift cameras. 14. Practice on sewing machine, exercise on stitching machine.
12
13
REPRODUCTION & PHOTOGRAPHY - I
Subject Code 34410
Sessioinal No of Period in one session : - No. of Periods Per Week Full Marks : 50
L T P/S Annual Exam. : 30 - - - Internal Exam. : 20
Contents:- 1. Preparation of Line & Half Tone Negative. 2. Preventive maintenance of Crocess Camera. 3. Scaling of different types of originals. 4. Factor Controlling of exposure & development. 5. Basic Ingredient of Developers.
1
Scheme of Teaching and Examination for
IV Semester DIPLOMA in ELECTRONICS & COMMUNICATION ENGINEERING
THEORY
Sl.
No. SUBJECTS
SUBJECT
CODE
TEACHING
SCHEME EXAMINATION SCHEME
Periods
per
Week
Periods
in one
Session
Hours
of
Exam.
Terminal
Exam. (A)
Marks
Final
Exam. (B)
Marks
Total
Marks
(A+B)
Pass
Marks
Final
Exam.
Pass
Marks in
the
Subject
1 Digital
Electronics– I 21401 6 50 3 20 80 100 26 36
2
Communication
Components and
Materials
38402 6 50 3 20 80 100 26 36
3
Advance
Electronic Devices
and Circuits 21403 6 60 3 20 80 100 26 36
4 Network and
Lines 21404 6 50 3 20 80 100 26 36
5
Basic Comm.
Techniques &
Sound
Engineering
21405 6 50 3 20 80 100 26 36
Total :- 30 500
PRACTICAL
Sl.
No.
SUBJECTS SUBJECT
CODE
TEACHING
SCHEME
EXAMINATION SCHEME
Periods
per
Week
Periods
in one
Session
Hours
of
Exam.
Marks
Internal
Exam.
(A)
Marks
External
Exam.
(B)
Total
Marks
(A+B)
Pass
Marks
Final
Exam.
Pass
Marks in
the
Subject
6
Electronic
Constriction and
repair Lab. 21406 6 60 3 20 80 100 32 42
Total :- 6 100
SESSIONAL
Sl.
No.
SUBJECTS SUBJECT
CODE
TEACHING
SCHEME
EXAMINATION SCHEME
Periods
per
Week
Periods
in One
Session
Marks of Internal
Examiner (X)
Marks of External
Examiner (Y)
Total
Marks
(X+Y)
Pass
Marks in
the
Subject
7 Electronics
Circuit Lab. 21407 3 50 40 60 100 50
8 Digital Electronics
Lab. 21408 3 50 20 30 50 25
Total :- 6 150
Total Periods per Week 42 Total Marks 750
2
DIGITAL ELECTRONICS - I
Subject Code
21401
Theory No of Period in one session : 50
No. of Periods Per Week Full Marks : 100
L T P/S Annual Exam. : 80
06 - - Internal Exam. : 20
Rationale
Digital System has made great in roads in the field of Electronics. The use of Digital Circuits is rapidly
increasing in all most all the electronic applications, to be it microprocessors, Computers, Communications,
Measuring instruments and others.
Objectives
This paper is to deal with the basics of Digital System. The students are expected to learn the Binary System,
Conversions from one System to another, the various Logic Circuits, Digital ICs and connected basic Digital
Circuits used in Electronic field.
CURRICULUM
SL Topics Periods 1. Binary System 08
2. Boolean Algebra and Logic Gates 06
3. Simplification of Boolean Function 05
4. Digital Integrated Circuits 06
5. Combinational Logic 12
6. Multivibrator and Synchronous Sequential Logic 06
7. Shift Registers and Counters 07
Total 50
CONTENTS
Topics Content Periods
01 Binary System 08
01.01 Transistor in cut off and saturation. 02
01.02 Binary Numbers. 02
01.03 Number Base Conversion. 01
01.04 Hexadecimal. 01
01.05 Complements, Signed Binary numbers. 01
01.06 Codes: Weighted and Non-Weighted codes. 01
02 Boolean Algebra and Logic Gates 06
02.01 Basic Definition of Boolean Algebra, Axiomatic definition of Boolean Algebra. 01
02.02 Basic theorem and properties of Boolean Algebra. 02
02.03 Boolean functions, Canonical and standard forms. 01
02.04 Other Logic Operations. 01
02.05 Digital Logic Gates. 01
03 Simplification of Boolean Function 05
03.01 Theorem and K-map methods up to variables. 02
03.02 Product of sum and sum of product simplification. 01