SBN Corp Profile_2.pdf

7/29/2019 SBN Corp Profile_2.pdf

http://slidepdf.com/reader/full/sbn-corp-profile2pdf 1/33

A FAMILY OF QUALITYA FAMILY OF QUALITY

Corrosion Resistant Products & Services for the Oil & Gas, Petrochemical, Power Corrosion Resistant Products & Services for the Oil & Gas, Petrochemical, Power

and Marine Industr iesand Marine Industr ies

SBN INDUSTRIES SDNSBN INDUSTRIES SDN BHDBHD(Company No. 070659(Company No. 070659--P)P)



STATEMENT FROM THE BOARDSTATEMENT FROM THE BOARD

For almost 30 years, SBN has met the domestic and international demand by producing qualityFor almost 30 years, SBN has met the domestic and international demand by producing qualitycorrosion resistant products for the oil & gas, petrochemical, power and marine industries.corrosion resistant products for the oil & gas, petrochemical, power and marine industries.

Knowledge, technical innovation and teamw ork are at the centre of who w e are. We have focusedKnowledge, technical innovation and teamw ork are at the centre of who w e are. We have focusedon leveraging these assets to deliver solutions that improve customers performance.on leveraging these assets to deliver solutions that improve customers performance.

Our products and services combine domain expertise, best practices, safe and environmentallyOur products and services combine domain expertise, best practices, safe and environmentally

sound operations, innovative technologies and high quality support, aimed at helping our sound operations, innovative technologies and high quality support, aimed at helping our customers to increase their efficiency, lower producing costs as well as improving productivitycustomers to increase their efficiency, lower producing costs as well as improving productivityand increase asset value in a safe and environmentally sound manner.and increase asset value in a safe and environmentally sound manner.

We are com mitted to provide services that enhance and optimize knowledge that meets theWe are com mitted to provide services that enhance and optimize knowledge that meets thechanging need of our customers.changing need of our customers.

Our ultimate objectives are to ensure that the needs and interest of our valued customers are wellOur ultimate objectives are to ensure that the needs and interest of our valued customers are welltaken care of at all times and that w e exceed their expectations in every m anner and at every steptaken care of at all times and that w e exceed their expectations in every m anner and at every stepof the way.of the way.

Warm regardsWarm regards

DatoDato’’ MuradMurad HashimHashim

(Executive(Executive ChairmanChairman ))



QUALITY POLICYQUALITY POLICY

The company strive to be the most reliable, competitive and innovative manufacturer for The company strive to be the most reliable, competitive and innovative manufacturer for

the Oil and Gas, Power Generation and Petrochemical Industries by the fol lowing policy:the Oil and Gas, Power Generation and Petrochemical Industries by the fol lowing policy:

We will always produce superior quality products andWe will always produce superior quality products and

provide best customer serviceprovide best customer service

We are committed to total quality management concept andWe are committed to total quality management concept and

continually improvement programcontinually improvement program

Do right the first t ime and achieve higher productivityDo right the first t ime and achieve higher productivity

HjHj MdMd RashidRashid MasrukinMasrukin

(General(General Manager /Manager / Director)Director)



Design facilities, establish practices, provides training and conduct operationsDesign facilities, establish practices, provides training and conduct operationsin a manner that safeguards workers/contractors, property and the communitiesin a manner that safeguards workers/contractors, property and the communitiesin which it operatesin which it operates

Respond quickly, effectively and w ith care to emergencies or accidentsRespond quickly, effectively and with care to emergencies or accidentsresulting from i ts operations, cooperating with industrial organization andresulting from i ts operations, cooperating with industrial organization and

authorized government agenciesauthorized government agencies

Comply with all applicable laws and regulations and apply responsibleComply with all applicable laws and regulations and apply responsiblestandards of its own where law and regulations do not existstandards of its own where law and regulations do not exist

Stress to all employees/contractors their responsibilities and accountabilityStress to all employees/contractors their responsibilities and accountabilityfor safety and health performancefor safety and health performance

Undertake appropriate reviews and evaluation of its operations to measureUndertake appropriate reviews and evaluation of its operations to measureprogress and to ensure compliance with this safety and health policyprogress and to ensure compliance with this safety and health policy


(HSE Chairman)(HSE Chairman)

HSE POLICYHSE POLICY



SSBNBN isis committedcommitted toto protectprotect thethe environmentenvironment byby reducingreducing thethe presentpresent andand futurefutureenvironmentalenvironmental riskrisk of of itsits businessbusiness operationsoperations..

Our Environmental Policy is:Our Environmental Policy is:

Minimise Environmental RisksMinimise Environmental Risks of our business operations.of our business operations.

ThisThis meansmeans thatthat SBNSBN isis committedcommitted toto::

11.. ComplyingComplying withwith al lall applicableapplicable environmentalenvironmental lawslaws andand regulationsregulations

22.. InvestigatingInvestigating andand controll ingcontroll ing thethe impactimpact of of hazardoushazardous releasesreleases toto thethe environmentenvironment

33.. ContinuallyContinually improvingimproving operationsoperations whichwhich couldcould havehave aa significantsignificant impactimpact onon thethe environmentenvironment

educatingeducating associatesassociates toto bebe responsibleresponsible environmentalenvironmental stewardsstewards throughthrough recyclingrecycling

44.. ConservingConserving resourcesresources andand ultimatelyultimately eliminatingeliminating wastewaste andand thethe environmentalenvironmental risksrisks of of our our businessbusinessoperationsoperations


(HSE(HSE Chairman)Chairman)

ENVIRONMENTAL POLICYENVIRONMENTAL POLICY



SBN IN MALAYSIASBN IN MALAYSIA



OUR CUSTOMERSOUR CUSTOMERS



IIncorporatedncorporated in Malaysia on 19 May 1981in Malaysia on 19 May 1981

Formerly known as Southern Bolts & Nuts Sdn BhdFormerly known as Southern Bolts & Nuts Sdn Bhd

19931993 – – accredited with MS ISO 9001 from SIRIM QAS Internationalaccredi ted wi th MS ISO 9001 from SIRIM QAS International

ObtainedObtained PetronasPetronas License since 1993License since 1993

Equity Distribution:Equity Distribution:

55%55% BumiBumi

30% Foreign30% Foreign

15% Non15% Non--BumiBumi

Total workforceTotal workforce – – 150150

Factory areaFactory area -- 65,91365,913 sq.ftsq.ft

COMPANY OVERVIEWCOMPANY OVERVIEW



ORGANISATION CHARTORGANISATION CHART



ORGANISATION CHARTORGANISATION CHART – – QUALITY ASSURANCEQUALITY ASSURANCE

CSS DIVISION:

QA Engineer

CP DIVISION:

QA Supervisor

BN DIVISION:

QA Engineer

QA

Inspector

QA

Inspector

Lab

Technician

QC

Inspector

QA Clerk QC

Inspector

Document

Controller

QA MANAGER

Saiful Effendy

OPERATION DIRECTOROPERATION DIRECTOR

Mohd Puat IbrahimMohd Puat Ibrahim



Incorporated wi th manufactur ing li cense to produce Cold Headed Bolt &Incorporated wi th manufactur ing li cense to produce Cold Headed Bolt &

Nuts for local and export marketNuts for local and export market

Produces Bolts from 3/8” though to 4” diameter with capaci ty of 500 tonsProduces Bolts from 3/8” though to 4” diameter with capaci ty of 500 tons

per monthper month

19811981 – – appointed as Sole Agent for Atlas Bol t Ltd, UK for High Tensi le Bolts,appointed as Sole Agent for Atlas Bolt Ltd, UK for High Tensi le Bolts,

HelicoilHelicoil Inserts and Inserting ToolsInserts and Inserti ng Tools

19841984 – – market Fluorocarbon (PTFE) coated bolts & nuts to Oil & Gasmarket Fluorocarbon (PTFE) coated bolts & nuts to Oil & Gas

companies and for Offshore installationcompanies and for Offshore installation

SetSet--up facil it ies to produce Fluorocarbon coated bolts & nuts under up facil it ies to produce Fluorocarbon coated bolts & nuts under

brandbrand

EESTABLISHMENTSSTABLISHMENTS



19901990 – – signed a Conf ident ial i ty Agreement with Warwicksigned a Confidentiality Agreement wi th Warwick FinspaFinspa Ltd, UK toLtd, UK to

manufacturemanufacture MonostrutMonostrut Cable Ladders in MalaysiaCable Ladders i n Malaysia

19931993 -- was developed. Designed for supporting cables in thewas developed. Designed for supporting cables in the

Oil , Gas , Power and Bui lding industr iesOil , Gas , Power and Bui lding industr ies

19941994 – – signed a Licence Agreement to manufacturesigned a Licence Agreement to manufacture

brandbrand CathodicCathodic Protection productsProtection products

19961996 – – obtained al l marketing activi ties andobtained all marketing activit ies and acquireacquire thethe enti reentire business of business of

CathodicCathodic Protection from WattylProtection from Wattyl--DimetDimet

20012001 – – set up Hydraul ic Bolting Services business including rental of subset up Hydrauli c Bolt ing Services business including rental of sub--

sea hydrauli c bol ting tools and equipmentsea hydrauli c bol ting tools and equipment

20052005 – – exclus ive distributorship to market and sel lexclusive distributorship to market and sell ZingaZinga products, a Zincproducts, a Zinc

galvanized solutions better than HDGgalvanized solutions better than HDG

EESTABLISHMENTSSTABLISHMENTS



OUR PRODUCTSOUR PRODUCTS



fluoropolymer fluoropolymer coated bolts and nuts was developed in 1983coated bolts and nuts w as developed in 1983

coating and a base metal coat with high PTFE content is best suited for coating and a base metal coat with high PTFE content is best suited for

installations in petrochemical plants, offshore platforms and in corrosive environmentinstallations in petrochemical plants, offshore platforms and in corrosive environment

Cadmium plated, PTFE top coatCadmium plated, PTFE top coat waswas tested and witnessed by independenttested and witnessed by independent

33rdrd party shows,party shows, NO RUST after 9,000 hoursNO RUST after 9,000 hours (more than 1 year) salt(more than 1 year) salt--frog testfrog test

coatingcoating is effective and more economical than using stainless,is effective and more economical than using stainless, incoloyincoloy,,

titanium and other exotic materialstitanium and other exotic materials

Gives the best corrosion resistance, low friction wi th self Gives the best corrosion resistance, low friction wi th self--lubricating, nonlubricating, non--galling propertiesgalling properties

thus reducing makethus reducing make--up and break out torquesup and break out torques

An excellent product for offshore and subsea installations An excellent product for offshore and subsea installations

Resists most acids and unaffected even when exposed to hydrogen at 121Resists most acids and unaffected even when exposed to hydrogen at 121ºC at 2,000psiºC at 2,000psi

GROUP OF PRODUCTS: FASTENERSGROUP OF PRODUCTS: FASTENERS



11.. PETROLEUM STUDBOLTS & NUTSPETROLEUM STUDBOLTS & NUTS

GRADE:GRADE: SIZESIZE::

ASTM A193 B7 ASTM A193 B7 3/83/8”” -- 4”4” DiaDia

Heavy Hex. Nut A194 2HHeavy Hex. Nut A194 2H M12M12 – – M52M52 DiaDia

ASTM A193 B16 ASTM A193 B16 ½”½” -- 4”4” DiaDia

ASTM A320 L7 ASTM A320 L7 ½”½” -- 4”4” DiaDia

Heavy Hex. Nut A194 Grade 4/G7Heavy Hex. Nut A194 Grade 4/G7 ½”½” -- 4”4” DiaDia

ASTM A193 B8/B8M ASTM A193 B8/B8M ½”½” -- 4”4” DiaDia

Heavy Hex. Nut A194 Grade 8, 8M & 8CAHeavy Hex. Nut A194 Grade 8, 8M & 8CA ½”½” -- 4”4” DiaDia

B150 /63000B150 /63000 ½”½” – – 1 ½”1 ½” DiaDia

A453 Grade 660 A453 Grade 660 ½½ ”” – – 2 ½”2 ½” DiaDia

S32750/S32760 Super DuplexS32750/S32760 Super Duplex StudboltsStudbolts & Nuts& Nuts ½”½” – – 2 ¼”2 ¼” DiaDia


We manufacture and stock the fol lowing range of productsWe manufacture and stock the fol lowing range of products ::




3.3. OTHERSOTHERS

BS 916BS 916 -- Hex. BoltHex. Bolt

ASTM A307 ASTM A307 Hex. BoltHex. Bolt

Anchor / Foundation Bolt & U Anchor / Foundation Bolt & U--BoltBolt

BS 3BS 369692 Grade 8.8 High Tensile Bolt2 Grade 8.8 High Tensile Bolt

12 Point Screw12 Point Screw

G12G12--9 Socket Cap Screw9 Socket Cap Screw

Socket Set Screw DogSocket Set Screw Dog--PointPoint

2.2. SPECIAL FASTENERSSPECIAL FASTENERS

CNC MachiningCNC Machining

ForgingForging

Thread RollingThread Rolling

Exotic Material stock: A286,Exotic Material stock: A286, InconelInconel 718,718,S32750/32760, A630, E43404, ASTM A564S32750/32760, A630, E43404, ASTM A564

TypeType 630630

Specific Heat TreatmentSpecific Heat Treatment

Special Coating RequirementSpecial Coating Requirement

Unique marking, traceability and testingUnique marking, traceability and testing

requirementrequirement

BS 4395BS 4395 -- Pt. 1 & 2 Hex. BoltPt. 1 & 2 Hex. Bolt

A490 A490 -- Hex. BoltHex. Bolt

ASTM 325 ASTM 325 -- Hex. BoltHex. Bolt

F10TF10T -- Hex. BoltHex. Bolt

G10G10--99 – – Hex. BoltHex. Bolt

F436F436 -- Hardened FlatHardened Flat Washer Washer

4.4. STRUCTURAL BOLTS &STRUCTURAL BOLTS & NUTSNUTS



GROUPGROUP OF PRODUCTS:OF PRODUCTS:

CABLECABLE SUPPORT SYSTEMSUPPORT SYSTEMCABLECABLE MANAGEMENTMANAGEMENT

Ladders, Trays, Trunkings, Wire-Mesh Trays, Channels, Concrete Inserts, Cantilever Arms,Trapeze, Cleats, Fasteners and Accessories

was developed on 1993was developed on 1993

Used in high specification applicationsUsed in high specification applications – – oi l r igs, pow er plants, airports, petrochemical,oil rigs, power plants, airports, petrochemical,

chemical plants & high quality industrial and commercial installations & bui ldingschemical plants & high quality industrial and commercial installations & bui ldings

Designed to facil itate fast and easy installation of cleats and cablesDesigned to facil itate fast and easy installation of cleats and cables

Roll formed side rail profiles to 6m or moreRoll formed side rail profiles to 6m or more

Robotic high output consistent superior quality productionRobotic high output consistent superior quality production

Provides integrated system that includes fittings, covers,Provides integrated system that includes fittings, covers, bracketriesbracketries, strut channels,, strut channels,cable cleats, cable ties and accessoriescable cleats, cable ties and accessories



Materials:Materials:

1.1. Metal:Metal:

Mild Steel HDGMild Steel HDG

Stainless Steel 304, 316 & 316LStainless Steel 304, 316 & 316L

Aluminium Aluminium

PrePre – – Galvanized (GI) Epoxy CoatedGalvanized (GI) Epoxy Coated

ElectrogalvanizedElectrogalvanized (EG) Epoxy Coated(EG) Epoxy Coated

1.1. CCABLE LADDER ABLE LADDER

SpecificationsSpecifications conforming to:conforming to:

♦ NEMA VENEMA VE--1 20021 2002 ♦ NEMA FGI (Non Metal) StandardsNEMA FGI (Non Metal) Standards

Complete with fitt ings & accessoriesComplete with fitt ings & accessories

Well engineered design for flexibil ity, strong and easyWell engineered design fo r flexibil ity, strong and easy installationinstallation

2.2. Non Metal:Non Metal:

FRPFRP (Fiber Glass Reinforced Plastic):(Fiber Glass Reinforced Plastic):

Polyester Polyester

Acrylic ( Acrylic (Modar Modar))

VinVinyylleester ster

PhenolicPhenolic ResinResin





2.2. CCABLE TRAY ABLE TRAY

SolidSolid TThroughhrough andand Perforated DesignPerforated Design

ReturnReturn FlangeFlange HeavyHeavy DutyDuty TypeType

NonNon--ReturnReturn FlangeFlange LightLight DutyDuty TypeType

MaterialMaterialss ::

MildMild SteelSteel HDGHDG

StainlessStainless SteelSteel 304304,, 316316 && 316316LL

Aluminium Aluminium

FRPFRP (Fiber (Fiber GlassGlass ReinforcedReinforced Plastic)Plastic)

PrePre – – GalvanizedGalvanized (GI)(GI) EpoxyEpoxy CoatedCoated

ElectrogalvanizedElectrogalvanized (EG) Epoxy Coated(EG) Epoxy Coated

CompleteComplete withwith f it tingsfittings andand accessoriesaccessories



3.3. CCABLE TRUNKING ABLE TRUNKING

Raise Floor Raise Floor TrunkingTrunking,, Under Floor Under Floor

TrunkingTrunking andand Flash Floor Flash Floor TrunkingTrunking SystemsSystems

MaterialMaterial ::

ColdCold RolledRolled SheetSheet

GalvanizedGalvanized SheetSheet

ElectroElectro GalvanizedGalvanized SheetSheet

FinishFinishinging::

EpoxyEpoxy Powder Powder CoatedCoated

PlasticPlastic CoatedCoated

Fluoropolymer Fluoropolymer PlasticPlastic

DesignDesign toto su itsuit consultantsconsultants conceptconcept



CORROSION ENGINEERING & CONSULTANCY SERVICESCORROSION ENGINEERING & CONSULTANCY SERVICES

CP System, Alumin ium, Zinc & Magnesium AnodesCP System, Alumin ium, Zinc & Magnesium Anodes

Splash Zone Protection Systems, Corrosion SurveyingSplash Zone Protection Systems, Corrosion Surveying and Inspecting Servicesand Inspecting Services

Impress Current CP Design, Installation, Services, TurnImpress Current CP Design, Installation, Services, Turn--KeyKey Contractor Contractor

DeepseaDeepsea Anodes type approved by Shell Global Anodes type approved by Shell Global

GROUPGROUP OF PRODUCTS:OF PRODUCTS:CATHODIC PROTECTIONCATHODIC PROTECTION



Rental and Sales of Hydraul ic Bolt Tensioning & Hydraul ic Torque WrenchRental and Sales of Hydraul ic Bolt Tensioning & Hydraul ic Torque Wrench

Contract ServicesContract Services

Commissioning for New Build Oil Rigs in Local Shipyard or Fabricator Commissioning for New Build Oil Rigs in Local Shipyard or Fabricator

Supply Equipment & Manpower for any projectsSupply Equipment & Manpower for any projects

Offshore Platform Shutdown ServiceOffshore Platform Shutdown Service

EnerpacEnerpac Agent on Bolting Solutions Products Agent on Bolting Solutions Produc ts

GROUPGROUP OF PRODUCTS:OF PRODUCTS:BOLTING SERVICESBOLTING SERVICES



OTHER SERVICESOTHER SERVICES

ElectroplatingElectroplating and Spray Coatingand Spray Coating ServicesServices -- includes Cadmiumincludes Cadmium

Fluorocarbon Coating, PTFE or Ceramic BaseFluorocarbon Coating, PTFE or Ceramic Base

Metal StampingMetal Stamping

Powder Epoxy CoatingPowder Epoxy Coating

Hot Dip GalvanizingHot Dip Galvanizing

Zinc Phosphate or Manganese PhosphateZinc Phosphate or Manganese Phosphate

MetalMetal FabricationFabrication



AUTHORISED AGENTS AUTHORISED AGENTS

We are an author ized agent for:We are an author ized agent for:

11.. PSIPSI

Flange Insulation KitsFlange Insulation Kits

Monolithic JointsMonolithic Joints

2.2. PILEPILE--GARDGARD

Splash zone Wrapping SystemSplash zone Wrapping System

3.3. ZINGAZINGA

Film Galvanizing SystemFilm Galvanizing System



OUR INFRASTRUCTURES & FACILITIESOUR INFRASTRUCTURES & FACILITIES















AWARDS & CERTIFICATIONS AWARDS & CERTIFICATIONS




AWARDS & CERTIFICATIONSAWARDS & CERTIFICATIONS




AWARDS & CERTIFICATIONSAWARDS & CERTIFICATIONS




THANK YOUTHANK YOU



THANK YOUTHANK YOU

SBN Corp Profile_2.pdf

Documents