SB-DB-SBB-DBB a Spillo - Filettate SB-DB-SBB-DBB Needle Type - Threaded Mod. 130-1 ... 190-1 Applicazioni Intercettazione e sfiato di strumenti di pressione (manometri, pressostati, trasmettitori, ecc.). Utilizzate per consentire un’installazione più compatta rispetto alle valvole tradizionali, particolar- mente indicate in installazioni con presenza di vibrazioni. Connessioni Filettate secondo ANSI-ASME B1.20.1 ISO 228 - ISO 7/1 Rating Standard: 6000 PSI (420 bar) Opzionale: 10000 PSI (700 bar) Tenute Standard: PTFE (T ≤ 200° C) Opzionale: Grafite (T > 200° C) Peculiarità Otturatore svincolato dallo stelo Spina di blocco del bonnet Protezione antipolvere Riduzione di tempi e costi d’installazione Applications Pressure instruments isolation and vent (gauges, switches, transmitters, etc.). Used as alternative to conventional manifold to permit a more compact installation, particular recommended in presence of vibration. Connections Threaded to ANSI-ASME B1.20.1 ISO 228 - ISO 7/1 Rating Standard: 6000 PSI (420 bar) Optional: 10000 PSI (700 bar) Seals Standard: PTFE (T ≤ 200° C) Optional: Graphite (T > 200° C) Features Not rotating trim Bonnet locking pin Dust cup Reduction of time and installation cost Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavviso Dimensions and weight in table are for reference only and may be changed without notice NPT NPT - F A max (mm) Ø B max (mm) Kg 1/4” NPT-F / M 1/4” 120 50 2,0 1/2” NPT-F / M 1/2” 120 70 4,0 3/4” NPT-F / M 3/4” 130 70 4,5 1” NPT-F / M 1” 150 70 5,0 Ingresso Uscita Dimensioni Peso Inlet Outlet Dimensions Weight SB SBB DB DBB REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AU EMAIL: [email protected]TEL: 1300 001 209
8
Embed
SB-DB-SBB-DBB a Spillo - Filettate SB-DB-SBB-DBB Needle ... · SB-DB-SBB-DBB a Spillo - Filettate SB-DB-SBB-DBB Needle Type - Threaded Mod. 130-1 ... 190-1 Applicazioni Intercettazione
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SB-DB-SBB-DBB a Spillo - FilettateSB-DB-SBB-DBB Needle Type - Threaded
Mod. 130-1 ... 190-1
Applicazioni
Intercettazione e sfiato di strumenti di pressione (manometri,
pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali, particolar-
mente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Standard: 6000 PSI (420 bar)
Opzionale: 10000 PSI (700 bar)
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Standard: 6000 PSI (420 bar)
Optional: 10000 PSI (700 bar)
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
B
D
1/4’’ NPT-F
1/2’’ NPT-F
*Sfiato / Vent(solo per / only for SBB-DBB)
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 135-6 ... 195-6
Applicazioni
Intercettazione e sfiato di strumenti di pressione
(manometri, pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali,
particolarmente indicate in installazioni
con presenza di vibrazioni.
Connessioni
A saldare BW o SW
Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Secondo schedula
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Welding BW or SW
Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
To schedule rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - A Saldare BW&SWSB-DB-SBB-DBB Needle Type - Welding BW&SW
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
SB SBBDB DBB
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
5 L G * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE
G Grafite / Graphite (std)
X A richiesta / On demand
D D D
E 3/4” NPT-F
F 1” NPT-F
B 1/4” NPT-F
D 1/2” NPT-F
* Connessioni OUT Connections OUT
B
D
1/4’’ NPT-F
1/2’’ NPT-F
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
5
6
BWxFiletto F / BWxThread F
SWxFiletto F / SWxThread F
Connessioni / Connections
BW40
BW 40
BW 80
BW 160
BW XXS
SW 40
SW 80
SW 160
SW XXS
Schedula / Schedule
E 3/4”
F 1”
B 1/4”
D 1/2”
Connessioni INConnections IN
X A richiestaOn demand
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
135-
6 ..
. 19
5-6
• R
ev.
2 -
04/2
012
Mod. 135-6 ... 195-6
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 137 ... 197
Applicazioni
Intercettazione e sfiato di strumenti di pressione
(manometri, pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali,
particolarmente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Flangiate-Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Secondo rating flangia
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation,
particular recommended
in presence of vibration.
Connections
Flanged-Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
To flange rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - Flangiate-Filettate SB-DB-SBB-DBB Needle Type - Flanged-Threaded
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
7 L T * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE (std)
G Grafite / Graphite
X A richiesta / On demand
D D D
B 1/4” NPT-F
D 1/2” NPT-F (std)
* Connessioni OUT Connections OUT
B
D
1/4’’ NPT-F
1/2’’ NPT-F (std)
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
7 Flangia-Filetto / Flange-Thread
Connessioni / Connections
150RF
150 RF
300 RF
600 RF
900/1500 RF
2500 RF
150 RJ
300 RJ
600 RJ
900/1500 RJ
2500 RJ
Flangia / Flange
J 2” Flang.
Connessioni INConnections IN
E 3/4” Flang.
F 1” Flang.
D 1/2” Flang.
H 1 1/2” Flang.
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
137
...
197
• R
ev.
2 -
04/2
012
Mod. 137 ... 197
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 138 ... 198
Applicazioni
Intercettazione e sfiato di strumenti di pressione (manometri,
pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali, particolar-
mente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Flangiate-Flangiate
Rating
Secondo rating flangia
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Flanged-Flanged
Rating
To flange rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - Flangiate-FlangiateSB-DB-SBB-DBB Needle Type - Flanged-Flanged
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
8 L T * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE (std)
G Grafite / Graphite
X A richiesta / On demand
D D
B
D
1/4’’ NPT-F
1/2’’ NPT-F (std)
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
8 Flangia-Flangia / Flange-Flange
Connessioni / Connections
150RF
150 RF
300 RF
600 RF
900/1500 RF
2500 RF
150 RJ
300 RJ
600 RJ
900/1500 RJ
2500 RJ
Flangia / Flange
J 2” FLANG.
Connessioni IN-OUTConnections IN-OUT
E 3/4” FLANG.
F 1” FLANG.
D 1/2” FLANG.
H 1 1/2” FLANG.
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
138
...
198
• R
ev.
2 -
04/2
012
Mod. 138 ... 198
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209